User Profile Parameter ID KVS not work

Hi,
I've got some troubles with parameter id KVS. I set it in my user profile,
parameter = KVS    
value = B2   
description = Version (CO)
when I call report GPCQE53LSADXCC16KZ1R96N5156001, there are two fields with this parameter,
and their value remain "0" instead of "B2".
I need to put the parameter value on one of this two fields, how can I do?
Could someone help me?
thank you in advance,
Fede

You can run Incremental Sync from user profile 3-4 times. This will delete the user profile from SharePoint UPA.
Now, we need to run UPA clean job timer job available in Job Definition inside central administration.
This is a by design issue which you have raised. But, to get it done on the same day you need to follow above mentioned steps. This would be done in some hour and cannot be achieved in 4-5 minutes. So, your original request is a by design issue and can be
done i some hours.
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

Similar Messages

  • User Profile Incremental Sync does not views changes in profiles.

    User Profile Incremental Sync does not views changes in profiles. I make full sync - all ok. then I change the phone number for example, and then start incremental sync and nothing moves to AD. 
    All the stages of FIM sync just state 0 records to process. Looks like it does not see the changes
    1.profile property is set up to sync with AD attribute (with EXPORT).
    2.no errors in Windows logs or FIM UI client, nor in sharepoint UI
    3. sharepoint server 2010 SP1, "CU June 2012"  14.0.6123.5002
    4. I have just reprovisioned sync service, set up AD connections and property-attribute relations. before
    there was this problem http://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadminhttp://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadmin,
    which I resolved by clearing timer service cache.
    Help with advice, urls or solurions please..

    Hi  VlH,
    According to your description, the issue can be caused by the Profile or Profile Values table.
    You can check the event log and ULS log to see detail error message.
    To check event log, click the Start button and type “Event Viewer” in the Search box.
    For SharePoint 2013, by default, ULS log is at      
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
    For your issue you can refer to the similar thread:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/bc3cd2ff-dc12-4223-a80b-e4cae616e861/user-profile-sync-doesnt-update-the-profiles-from-ad?forum=sharepointadminlegacy
    Also a good blog for user profile synchronization:
    http://www.harbar.net/articles/sp2010ups.aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Input Parameter Mapping is not working in Sap HANA

    Hi, We created on ANALYTICAL view(A) with Input Parameters, on top of Analytical view created one Calculation view(B) and mapped Calculation view input parameter with Analytical view input paramter and its working fine. Finally we created one more calculation view on top existing calculation view(B) and mapped with corresponding input parameters. Input parameter mapping is working fine in between A(analytical view) and --------> B (first Calc view) but input parameter mapping is not working properly in between B(first Calc View)-----------C(second Calc View). it is giving all data whatever is coming from Calc View B. Kindly help us to resolve this.

    Hi,
    Write c in small for Command,
    theButton.mappingOfOnAction().addParameter("command","Save");
    Regards,
    Murtuza

  • Project Server 2010 - Project Permissions - Users and Groups filter is not working

    Hi,
    While giving permissions from project center ribbon on a project - Users and Groups filter is not working, we are not able to filter any user.
    I am not sure why this error is occurring  i tried giving permissions by opening the project  but still the same filtering is not happening. Below is the screen shot
    We have installed Service Pack 2 and June 2014 CU recently will this effect ?
    Can any one throw some light on this??
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

    Hi Geetha,
    Which IE version are you using? First I'd try to add the URL to the compatibility mode sites, then to the trusted sites (if it is not done already). Then I'd try to set the default browser as IE8 or 9 (pressing F12, developer tool).
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • User status profile settings on WBS not working

    Hello,
    We have a User status profile on WBS element which has various statuses in it allowing different business transactions when that particular user status is set.
    There is one user status NPC in that status profile which should disallow assignment or confirmation on maintenance work order. Now the status previous to NPC status allows assignment or confirmation of orders. So after a order is assigned to the WBS and the WBS user status is changed to NPC when we try to confirm order on this WBS in NPC status sytem allows order confirmation.
    Why is system allowing this inspite of the status profile config says confirmation is disallowed in NPC status. I have checked the object types in the status profile config and maintenance order is also included in that but still its not working. Please help in solving this issue, its critical.

    The business transactions disallowed under NPC status are as below,
    Acct. Assignment order/Project
    Actual activity Allocation
    Assignment Order/WBS
    Confirm Order
    Goods Movement
    Material Purchase Order
    Material Purchase Requisition
    Post Goods Issue
    But orders can be assigned in the status before NPC, but once NPC is set system does not allow assignment of new orders which is correct. But system allows confirmation of already assigned orders. Please help we do not want any order confimation after NPC is set.

  • Since I have upgraded to Firefox 4.0.1, it has been constantly freezing up. Now it does not work at all and I am unable to remove my profile. How can I remove my profile if Firefox does not work?

    I finally got so tired of Firefox freezing my computer that I tried to uninstall and reinstall. Upon reinstall, it will not work at all and I am unable to delete my old user profile. Is there any way to get rid of this profile so I can give one last attempt to get Firefox to work before switching permanently to Google Chrome? I really liked Firefox for years until they screwed it up with the recent changes.

    Try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

  • Nested AD User Groups in Workgroup Manager not working in Mavericks

    The setup is the traditional Golden Triangle, so Active Directory for users and groups, Open Directory for Managed Preferences. Both Apple clients and server are running 10.9.0
    While I can successfully manage the Mac's via OD computer groups, the OD user groups with nested AD groups no longer appear to work. If I nest an AD user it works fine, but not the AD users group.
    This is a new AD and new OD, no migrations. This is a setup I've done countless times over the years, but since Mavericks has been introduced, I can no longer make this work.
    Any help would be greatly appreaciated.
    Thanks,
    Alex Price

    Hello
    I have been having the same problem, when adding an AD Group to an OD group the users in the AD group are not managed, but if i add the user to the OD group it works fine, (with about 5000 active users this is not an option) this has been a problem with 10.9 and has not been fixed with 10.9.1, i assume we need a update to Workgroup manager?
    Maverick server is useless at the moment, cant upgrade the clients to Maverick if i cant manage them, are Apple just tring to make my job more difficult than it needs to be, i was happy that they provided Workgroup Manager for Mavericks because Profile Manager is simple not an option, but it would be good if it worked properly, its not a small problem so you would think apple would make it a priority.

  • Talent profile in the MSS not working

    Hello,
    I have problems with the long talent profile in the Mangers Self Service. When i press the "talent profile" link in the portal nothing happens. The talentprofil does not open. I have created a talentprofile for an employee in the ESS. The profile is filled. All the customizing activieties have been completed. Also business partners are created.
    Does anyone have an idea why the talentprofile in the MSS does not work. Maybe I have forgotten something!
    Thanks in advance
    Jürgen
    Here a screenshot

    Hi Guilherme.
    I am having the same problem and also this note not apply for my system
    I have checked the USER ID in infotype 0105
    Do you solve this issue?

  • SAP APO User Profile Parameter Values

    Hello All,
    I would like to know where can I find parameter values in the User Profile Setting.
    I could find many useful "Parameter Ids" but don't know what values needs to go in it. Is there a technical document some where that mentions values that needs to used?
    Few examples
    /SAPAPO/CDPS_OPTGUI1 (Time Unit of Value Display)
    /SAPAPO/SDP_GRAPH_TB (Hide/Display Toolbar Options for Graphic)
    Please advise.
    Thanks,
    Sanju

    Hello Sanju,
    In most cases these parameters have values X or blank... Per note 1084550 you will need to set the user parameter
    for /SAPAPO/SDP_GRAPH_TB to X .
    Regards,
    Ade

  • In .profile, why is alias not working?

    Recently (since upgrading to Mavericks??), several alias commands in ~/.profile are not working after I start Terminal (although numerous path settings set up there are working as expected).  For example, ~/.profile includes:
    alias mysqlctl='sudo /usr/local/mysql/support-files/mysql.server'
    alias mysqlstart='mysqlctl start'
    But after I start Terminal and execute
    mysqlstart
    I get error:
    bash: mysqlstart: command not found
    I know that something peculiar is going on because when I attempt to exit the (one and only) running Terminal session with command exit I just see an echoed response
    exit
    but can quit Terminal by executing the same exit command again.
    Moreover, if in Terminal I execute
    source ~/.profile
    then the aliases work as expected.
    I did try the ruse I found somwhere of including before any of the other alias lines in .profile the command alias sudo='sudo ' but that doesn't fix the problem.
    I thought perhaps some other startup file is being read and hence commands in ~/.profile are therefore not being executed, but I find no such: I have no
    ~/.bashrc or ~/.bash_profile or ~/.login file. (And Terminal is set to use the default login shell, which is bash.
    What could be wrong and how can it be fixed?

    I tried the method recommended at http://stackoverflow.com/questions/18773051/how-to-make-os-x-to-read-bash-profil e-not-profile-file, namely, to move all the commands formerly in ~/.profile into  ~/.bashrc and then to create  ~/.bash_profile consisting of lines:
    if [ -f ~/.bashrc ]; then
        source ~/.bashrc
    fi
    (And of course delete ~/.profile).
    That does now allow my alias commands (formerly in ~/.profile and now in  ~/.bashrc) to work in Terminal.
    However, now executing in Terminal echo $PATH gives my entire path (as defined in  ~/.bashrc) twice -- in a rather strange order of duplication:
    /usr/local/mysql/bin
    /usr/texbin
    /opt/local/bin
    /opt/local/sbin
    /opt/local/apache2/bin
    /usr/local/mysql/bin
    /usr/texbin
    /opt/local/bin
    /opt/local/sbin
    /opt/local/apache2/bin
    /usr/bin
    /bin
    /usr/sbin
    /sbin
    /usr/local/bin
    /opt/X11/bin
    /usr/local/MacGPG2/bin
    /usr/texbin
    /Library/Frameworks/Python.framework/Versions/3.3/bin
    /Library/Frameworks/Python.framework/Versions/2.7/bin
    /Volumes/MacHD/Applications/Programming/Python/anaconda/bin
    /Volumes/MacHD/Users/murray/Library/Application Support/GoodSync
    /Volumes/MacHD/Users/murray/bin
    /Volumes/MacHD/Applications/Math/Singular/3-1-6/ix86Mac-darwin
    /Library/Frameworks/Python.framework/Versions/3.3/bin
    /Library/Frameworks/Python.framework/Versions/2.7/bin
    /Volumes/MacHD/Applications/Programming/Python/anaconda/bin
    /Volumes/MacHD/Users/murray/Library/Application Support/GoodSync
    /Volumes/MacHD/Users/murray/bin
    /Volumes/MacHD/Applications/Math/Singular/3-1-6/ix86Mac-darwin
    So something is still wrong!

  • Cross Farm: User Profile Custom Properties do not show up in the consumer farm web applications

    I have a two SharePoint 2010 farms, one is the publishing farm and user profile service is running on this farm. I have defined a couple of new custom properties, and after a while these custom properties do not show up at the consumer farm end.
    So, on the publishing farm, I can udpate the user profiles with values in these custom properties. However, neither the custom properties nor the values got synchronized to the consumer farm. What puzzled me further is that some of the existing custom properties
    exist on the consumer farm, but not the new custom properties I recently added.
    1. I have made sure the application pool accounts on both the farms being added to the administrators with full control permission in UPS on the publishing farm.
    2. The User Profile Service proxy (connected to the publishing farm UPS application)  is associated with all the web applications on the consumer farm.
    3. When values in the user profiles on the publishing farm changed, these changes do not get replicated to the consuming farm user profiles. This symptom occurs on both custom and OOB user profile properties.
    However, I cannot find any other related information on the web, nor from the ULS logs.

    Hi,
    As I understand, it did not display the new custom properties you defined in the publishing farm at the consumer farm end.
    1. Check if the topology Discovery Service Application runs well in consuming farm. In the Central Administration, it is the Application Discovery and load Balancer Service Application, check if it starts.
    In the IIS, it is the topology, check if it starts.
    2. Check the permissions have been established if you have established consumer farm permissions on Provider Farm before you publish the service application.
        1. Go to Central Administration and going to “Manage Service Applications”.
        2. Click on “Application Discovery and Load Balancer Service Application” and click “Permissions” from the ribbon.
    Your farm GUID should be listed with full permissions.
    The article is about Shared Service Architecture in a multi farm environment
    http://blogs.msdn.com/b/russmax/archive/2010/05/06/sharepoint-2010-shared-service-architecture-part-2.aspx
    Best regards
    Sara Fan
    TechNet Community Support

  • User Interface - auto detect does not work

    I have added the jQuery Mobile User Interface with Theme 50 to an old APEX 4.1 Application.
    When adding the new User Interface i checked the "auto detect" feature in the old User Interface.
    "Auto detect"- Help says:
    Select whether the appropriate user interface should be automatically detected. If auto-detection is enabled, the user will be redirected to the corresponding login page or home page.
    When calling the Application (only with the application-id) from my nexus 4 smartphone the application does not switch to the mobile Login page.
    Do i have to change any old settings or themes?
    Thanks so far

    You can run Incremental Sync from user profile 3-4 times. This will delete the user profile from SharePoint UPA.
    Now, we need to run UPA clean job timer job available in Job Definition inside central administration.
    This is a by design issue which you have raised. But, to get it done on the same day you need to follow above mentioned steps. This would be done in some hour and cannot be achieved in 4-5 minutes. So, your original request is a by design issue and can be
    done i some hours.
    Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

  • Maxl statement (display user in group all;) is not working.

    Hello,
    Hyperion version 9.3.1 upgraded to 9.3.3. Not sure the below issue is because of this
    I have an interesting issue with a maxl statement : "display user in group all;". When I execute this statement through command prompt doing essmsh, it does give out any records and also doesn't end. I will have to end it with ctrl+c.
    When I execute it through EAS console, then EAS console just hangs.
    But, if I try to retrieve the users from groups individually ( I mean "display user in group 'examplegrp';"), then its working fine and throwing out the records.
    It is giving me a hard time and my dumb mind not able to figure it out.
    Any ideas please?
    Thanks

    Hi CL, Yes I ran it on the Essbase Server. We actually set it up through a scheduled batch script which was perfectly fine till last month (I guess). We noticed this just a week ago. The only change we had in our environment is that we upgraded 9.3.1 to 9.3.3 recently. Not sure whether it is making any difference.
    Thanks,
    KK

  • New user: need help logging in not working

    I tried to setup using google talk. My email is working but ichat keeps coming back that my user name and password are not correct. I've tried changing them. Made new connections. Failed at all tries. I know someone posted earlier but to be honest I didn't understand the fix. Sorry! Strange but I am on my moms macbook but my macbook pro setup with not problem. The setting seem to all be the same. Thank you in advance.

    And specifically from those pics what does your server say you are trying to login to ?
    It is common that a Jabber Account will think the server will be the @gmail.com (Or @googlemail.com) from when you type in your Jabber ID, when it should be talk.google.com as in the pics.
    2:26 PM Saturday; April 5, 2008

  • NSAD user directory for shared services not working

    Hi!
    Im trying to configure a MSAD user directory for shared services in Essbase 11.1.2.1. I have done it correctly in Essbase 9.3.1.
    Back then i had to import certificates to the cacerts java file. Is it still necesary? I dont see it mentioned anywhere in the v.11 docs, however, its not working using same parameters. I get an error saying i have specified "either host or port value incorrect".
    Do i have to import certificates or am i missing anything else, can anybody help?
    Thanks!!
    Jorge

    Certificates have nothing to do with MSAD.
    when you reach to "MSAD user configuration" tab in Shared Services, try to see if you can auto configure user by inputting: sAMAccountNmae="some user ID", replace some user ID with your or admin ID, and verify if you can pull the users from the MSAD.

Maybe you are looking for