User Profile Services - Sync Connection disappearing after a few days - "Moss MA not found"

Hi,
This may sound like a common problem but i can't seem to find a solution.
I recently installed a SharePoint 2010 farm. The farm is currently SP1, Aug12 CU.
I created the user profile service application without any problems and created a connection, sync worked...everything was fine. Few days after, i noticed the connection disappeared! I tried recreating it but i got the above error. Tried deleting the SA
and recreating it but still the same.
I checked everything:
- FIM services are started
- User profile services (both) are started
- It is not an AD connection timeout (error comes up in a second and containers populate just fine)
- All permissions were given correctly (keep in mind this has worked before)
- Tried updating to the Aug12 CU
Then i remembered i installed the farm with the sql servers mapped with FQDN instead of NETBIOS or Alias.
That led me to try to enable netbios on the SA via PowerShell but to no avail.
So basically my question is...is there anything i can do or is re installing the farm the only solution?

Hi All,
Trevor, L:ooks like your suggestion works I juts tried creating a UPS with the FQDN and then changed to using the NetBIOS name. But the caveat is I am not using the NetBIOS name as the default database, I am using another DB Servet
Whatever we do at this point needs to be tested in DEV so we need DEV Server. I have never seen an environment successfully maintained using the FDQN If it were mr I would have already rebuilt it only takes 90 minutes or so to stand a an environment
up.
Would It would be better to Build another farm next to the first one and remove the content dbs from the old farm and move them to the new one and attaché them to new WebApps. I think it would take less time and be healthier in the long run
to move away from using the FQDN for SQL Completely, I don't believe its supported anyway..
This post from an MSDN Blog is titled NEVER, NEVER, AGAIN. Its just one example.
http://blogs.msdn.com/b/momalek/archive/2010/10/29/never-again-never-use-a-fqdn-for-the-sharepoint-2010-sql-server-name.aspx
I should have said this when I wrote the rename response, its really to attempt the rename or start over... Though Trevor is correct, if you specify the NetBIOS name of the instance when creating the UPS it will work.. Shame I didn't think of it,Trevor
you rock..
Trevor, I would like to get your thoughts as well??? To build another Farm or to continue using the one you have with an FQDN?
-Ivan
Ivan Sanders My LinkedIn Profile,
My Blog,
@iasanders, Business Intelligence in SharePoint 2013.

Similar Messages

Can I create User profile service sync connection for my site without Active directory?

Hi everyone,
Is it possible to use my site without active directory? our AD policy don't allow farm account to have "Replicating directory changes", If I export AD information to SQL and sync profile from SQL is it possible?
Thanks
TanaponP

Yes, you can use mysites without setting up user profile sync. But you won't be able to sync information from SQL without having a primary sync setup with AD first. Syncing to something like SQL is designed to augment existing profiles. It
won't create new ones.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Why are my notes disappearing after a few days?

I have an I-Phone 5, purchased last March. I have upgraded to IOS 7 when it first came out, no problem. I have been making lists of my packing boxes and they keep disappearing after a few days. I am wondering if sync is wiping them out. Anyone else having a problem with the notes feature?

Yahoo is holding Notes as hostage. Check your Yahoo account settings.

I keep adding notes to my iphone 5s and they disappear after a few days. However there is 2 notes that have been there since I got my phone in December. I beginning switching back to iphone. 3gs was great but 5s is my mistake...

I added a couple of notes to my iphone 5s when I got it back in December 13. Any other notes added since only last for a few days then disappear. I just opened the notes app and for a split second the note was there I added 3 days ago then it disappeared. I never had this problem with any other phones and I have had both windows and older iphones. It is getting to be a real pain as the notes are essential when I am abroad which is quite frequent. If it cannot be rectified can anybody recommend a decent 'notes' app that I can buy? maybe somthing similar to the one on the windows phones which comes as standard with them but a great app all the same.
Many thanks
Shukt Designs

Sorry to tell you but unless you have a Retail Apple Store close by, they are the only ones I have found with all the adapters and accessories. I bought an extra lightning to usb adapter the other day to use in my truck. Good luck....

Connection problems after installing wireless router: frequent "Server not found"

I recently got a Linksys wireless router but since then, a lot of webpages show "server not found" frequently. I can eventually open these if I keep refreshing the page or come back to it later. This only happens to my desktop PC connected by a cable but never happens to our 3 laptops with wireless connection. The LAN cable changed but problem persists. Desktop PC swapped but problem still persists. Is this simply a defective router?

What is the model no of the router...?
Try changing the MTU size to 1350 on the router and power cycle the router and check..

E3200 wireless disappears after a few days

I am using the E3200 in a bridge mode to my uverse wifi router, since the E3200 has 5ghz and my uverse router doesn't. every week or so, I would not be able to detect the E3200 on my Mac Book Pro (I only enabled 5ghz on the E3200), but I can connect to the 2.4ghz uverse router, then access the admin page of the E3200 w/o any problem.
i am running the latest 1.03 version, a router reset fixes the problem.
any ideas?

If the wireless network getting disconnect continuously then try the following settings:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
          1] Open the software and go to the option which says "Router Settings"
          2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
         3] Then go to the Wireless tab, keep network mode as mixed,
For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

After putting an entry into the calendar it disappears after a few seconds

Calendar entries disappear after a few second and do not sync between iPad and iPhone.

Hi,
Go to c: program files*86:common: adobe: sl cache, rename the sl cache
Go to c: program data: adobe: sl store: rename the sl store to old sl store.
Right click on premiere pro and run as admin.
Thank You
Arjun

MOSS MA not found never disappear

Hi
I have the following services started :
User Profile Service
User Profile Synchronization Service
I also have the following services started :
ForeFront Identity Manager Service
ForeFront Identity Manager Synchronization Service
When I try to create a new Synchronization Connection I get the following error:
MOSS MA not found
I restarted IIS and my virtual machine itself but all this was no use the error is still appearing.In a training center I joined few days ago it works in their lab PC after set the ForeFront services to Automatic and set their account to the SP_Farm
account but in my home PC I have all services started but still this error appears every time I try to create a Synchronization connection?
Anything else I could do? Please any suggestion could be helpfull...
I am too late but i will never give up

Try these steps -
1. Delete the User Profile Application Service.
2. Make sure all the FIM Services are running under the right service account.
3. Make sure the FIM Services are running after you have restarted it.
4. Recreate the User PRofile Application Service.
Let us know if this sync's it up. It seems there is some permission issues.
Ameet Phadnis (e Tek Global Inc.)
I deleted the User Profile Service Application then set the ForeFront services to Automatic then create a new User Profile Service Application.Then start the Sync service and leave it for 10 min.Then I found it started then I checked the ForFront Services and
found them Started too.Then I Delegate Replicating Directory changes permission to SP_Farm user.Then I opened the Configure New Sync Connection page and set its value as my book said.Then after clicking OK I get the same error I mentioned above.I checked
the ForFront services multiple times and found them Started all the time.
However something not clear for me in the Configure New Sync Connection page which is the checkboxes in the Containers section.I select only the Users checkbox which select all the users.The book is telling me to select People,SharePoint
and Users but the only one I have is Users.Ofcourse I'm using a different VM than the one the book use so I don't know if People and SharePoint is something custom in the books VM.
I am too late but i will never give up

HT4970 I've made entries three times over the past several months in Reminders only to have them dissappear after a few days. What am I doing wrong? Any chance they are being saved elsewhere so I can retreive them?

Why do all of my Reminders disappear after a few days? Can I retrieve them?

Why do all of my Reminders disappear after a few days? Can I retrieve them?

User profile service incremental sync failure

Hi all, I'm working for a client that has a failing UPS incremental sync. The scheduled sync was running fine until a couple of weeks ago when it suddenly stopped working. Coincidently, this was also at the same time that they noticed the incremental search
crawl and UPS audience compilation timer jobs failing. A timer service stop/start fixed the search/audience compilation problems, but they’re still having issues with the UPS incremental sync. I see the following errors in the ULS when the sync fails (nothing
logged in FIM operations window):
08/15/2013 09:19:05.73 OWSTIMER.EXE (0x1E40) 0x1C78 SharePoint Foundation Timer 6398 Critical The Execute method of job definition Microsoft.Office.Server.UserProfiles.UserProfileImportJob (ID ad907731-0878-411e-9184-2bd8eea74501) threw an exception.
More information is included below. Access to the requested resource(s) is denied 36285c84-5805-4af3-9df5-88254e67ba9f?
…followed by
08/15/2013 09:19:05.73 OWSTIMER.EXE (0x1E40) 0x1C78 SharePoint Foundation Timer 72ae Unexpected Exception stack trace: at Microsoft.ResourceManagement.WebServices.Client.ResourceTemplate.GetResource(UniqueIdentifier identifier, String[] attributeNames,
Nullable`1 resourceTime) at Microsoft.ResourceManagement.WebServices.ResourceManager..ctor(UniqueIdentifier resourceIdentifier, String typeName, String[] attributeNames, CultureInfo locale, Boolean includePermissionHints, TimeZoneInfo localTimeZone) at Microsoft.ResourceManagement.WebServices.ResourceManager..ctor(UniqueIdentifier
resourceIdentifier, String typeName, String[] attributeNames, CultureInfo locale, Boolean includePermissionHints) at Microsoft.Office.Server.UserProfiles.Synchronization.MAConfiguration..ctor(Guid resourceIdentifier) at Microsoft.Office.Server.UserProfiles.UserProfileImportJob.CreateSteps()
at Microsoft.Office.Server.UserProfiles.UserProfileImportJob.Execute() at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result) 36285c84-5805-4af3-9df5-88254e67ba9f
I’ve confirmed the following:
Were any changes made to farm servers around the time issue first appeared (group policy etc.) -
No
Farm (SP2010 Standard) version number - 14.0.6106.5000 (June 2011 CU) / 14.0.6029.1000 (SP1)
Are both FIM services started – Yes
Does the farm account have local admin rights – Yes
Does the farm account have log-in locally rights – Yes
Does the farm account have access to relevant FIM binaries - Yes
Does the network service account have access to relevant FIM binaries –
Yes (Network service has full control to this location (D:\Program Files\Microsoft Office Servers\14.0\Service) and this location (D:\Program Files\Microsoft Office Servers\14.0 directory)
Does the farm account have dbo on all UPS databases – Yes
Steps tried to fix so far:
Restarted timer service
Restarted User Profile Synchronization service in Central Administration
Restarted 'Forefront Identity Manager Service' and 'Forefront Identity Manager Sync Service' (server service)
Rebooted all farm servers including SQL
Moved service instance to another server (and back). Errors reported on other server after move:
System.Data.DataException: This request has an invalid target: B87AD086-D1CB-4008-BE44-706FF05D6378. The invalid target identifier is F2CC710F-99E1-45A2-8F9F-D6A5D1A3CAC4. Microsoft.ResourceManagement: System.Data.DataException: This request has
an invalid target: B87AD086-D1CB-4008-BE44-706FF05D6378. The invalid target identifier is F2CC710F-99E1-45A2-8F9F-D6A5D1A3CAC4. at Microsoft.ResourceManagement.Utilities.ExceptionManager.ThrowException(Exception exception) at Microsoft.ResourceManagement.Data.DataAccess.DoRequestCreation(RequestType
request, Guid cause, Boolean doEvaluation) at Microsoft.ResourceManagement.Data.DataAccess.CreateRequest(RequestType request, Guid cause, Boolean doEvaluation) at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(UniqueIdentifier requestor,
UniqueIdentifier targetIdentifier, OperationType operation, String businessJustification, List`1 requestParameters, CultureInfo locale, Boolean isChildRequest, Guid cause, Boolean doEvaluation) at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Put(Message
request) ?
Other issues
When creating a new sync connection in CA, the following message is displayed when the connection is saved:
“Unable to process create message”
I also see this error message in the logs:
A update on the configuration of a MA or MV failed to replicate to a target connector directory that is capable of storing MA/MV configurations. As a result, the MA/MV configuration data in this connector directory is not up to date. Please correct
the condition that causes the error, and triggers a resync by updating the password information of the target MA. Additional information: Error Code: 0x80230709 Error Message: (The extension operation aborted due to an internal error in FIM Synchronization
Service.) Operation: Create MA Name of the MA to replicate: MOSSAD-BLAH Guid of the MA to replicate: {BF18A3FA-190D-49F8-878B-D469D545B2A8} Name of the target MA: ILMMA Guid of the target MA: {F2CC710F-99E1-45A2-8F9F-D6A5D1A3CAC4}
The management agent appears in FIM, but isn’t displayed in SharePoint CA (UPS SA). At present we have a few test MA’s that appear in FIM but not in SharePoint CA (UPS SA).
I’m at a loss as to why this incremental sync has stopped working. It’s also strange that test sync connections are appearing in FIM despite error displayed in CA when provisioning them. Stranger sill, the test sync connections don’t appear in CA, but appear
in FIM.
Potential next steps include resetting the profile synchronization DB as detailed here http://technet.microsoft.com/en-us/library/ff681014(v=office.14).aspx#resetSync. If anyone has had any other suggestions, I’d be very grateful to hear about
them.
Many thanks

Try to start full sync,and if it also stop with the same error - try to reset Sync DB using this script:
$SyncDB = "<Sync DB name>"
$UserProfilesName = "<User Profile Service Application name>"
net stop sptimerv4
$SDB=Get-SPDatabase | where {$_.Name -eq $SyncDB}
$SDB.Unprovision()
$SDB.Status='Offline'
$UPS = Get-SPServiceApplication | where {$_.Displayname -eq $UserProfilesName }
$UPS.ResetSynchronizationMachine()
$UPS.ResetSynchronizationDatabase()
$SDB.Provision()
net start sptimerv4
Best regards, Andrii

Windows cannot connect to the User Profile Service service

On startup error message 'Windows cannot connect to the User Profile Service service' appears and windows will not start. Windows starts in safe mode. No corrupted user profiles. No viruses detected. Cannot resolve the problem. Any ideas?

On startup error message 'Windows cannot connect to the User Profile Service service' appears and windows will not start. Windows starts in safe mode. No corrupted user profiles. No viruses detected. Cannot resolve the problem. Any ideas?

This User Profile Application's connection is currently not available. The Application pool or user profile service may not have been started

Hi, we had installed SharePoint Service Pack 1 (SP1). And now the user profile service application is not available. Getting this
Error "This User Profile Application’s connection is currently not available. The Application pool or user profile service may not have been started".
How to troubleshoot the issue anh help/thoughts will be appreciated

Not sure, if this will help, but in my case all of my services were up and running (including app pools) and also IISRESET did not help. So at that point, looking at the error message, I assumed that there is something wrong with the app pool (or app pool
credentials) and went to CA --> Application Management --> Manage Service Applications and selected UPSA and under properties just created a new app pool to run under farm account (did not want to take any chances).
As soon as the new app pool was provisioned, the service came back.
Thanks, Ransher Singh, MCP, MCTS | Click Vote As Helpful if you think that post is helpful in responding your question click Mark As Answer, if you think that this is your answer for your question.

User Profile Service Not Syncing Membership Groups

We have noticed that since moving to SharePoint 2013 user memberships and followed sites on users mysites are not updating to remove sites that no longer exist or add new sites into the list. I tried the steps that used to fix this under 2010 outlined
here: https://support.microsoft.com/kb/2703630 but they do not seem to resolve the issue anymore. Has anyone had this happen to them in 2013 and figured out the steps to resolve it? To me it looks like the UserProfileService is not able to find
or refresh memberships into the user profile databases. Normally this is a permissions issue but the farm account and the account running the user profile service both have full control to the content databases.
If this post was helpful please mark it as helpful, if it solved your problem please mark it as
answered.
Visit my Blog: http://matthewchurilla.blogspot.com/

Hi Matthew,
Per my knowledge, the Memberships web part is not fully supported in SharePoint 2013, and the memberships in SharePoint sites cannot be updated.
The links below is for Office 365, however it’s true for SharePoint 2013:
http://support.microsoft.com/kb/2858263
https://social.msdn.microsoft.com/Forums/office/en-US/76778087-60e3-4720-ae50-5d2d359f1be9/my-membership-web-part-cannot-be-use-for-my-site?forum=sharepointdevelopment
As a workaround, you can use the new feature Following to follow the sites in SharePoint 2013:
http://blogs.office.com/2013/02/21/following-in-sharepoint-2013/
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Initiall SharePoint Server 2013 setup -- unable to manage new User Profile Service Application

During initial farm setup, creating an initial User Profile Service Application works fine. However, once it's created, I cannot 'manage' it through the Manage Service Applications page in central
admin.
I get a generic error (Sorry, something went wrong / unexpected error) with a correlation ID that doesn't seem to match any ULS log entries. (Yes, I merged logs from all machines in the farm.)
A Windows event log entry says:
A failure was reported when trying to invoke a service application: Endpoint Failure
Also frequent errors in ULS logs: (see below)
UserProfileApplicationNotAvailableException
User Profile Application      Proxy failed to retrieve partitions from User Profile Application: Micro…
SPDistributedCache DataCacheException
I did notice that the file 'ProfileService.svc does not exist in SharePoint's web services app at the URL you see in the error. (below)
I also found it interesting that the event log error shows 1 active endpoint and 3 failed endpoints. I have 2 WFEs and 2 app servers. But I'm only trying to get the user profile service app running on the application
servers. I have deleted and recreated this service app several times under various names (deleted/recreated its app pool as well) and wonder if these other failed endpoints could be orphans from previous instances...
Any thoughts on how I might successfully create this service application? I've already been Binging my head against a wall long enough that I would have been better off reinstalling the entire farm... I may still
do that.
FYI, my farm came from a slipstreamed SP1 install package, and received the July CU after several other things were already configured, including the already-failed UP service application.
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Foundation
Date:          8/8/2014 6:11:54 PM
Event ID:      8313
Task Category:
Topology
Level:         Error
Keywords:
User:          xyz\sp_farm
Computer:      spapp1.xyz.local
Description:
A failure was reported when trying to invoke a service application: EndpointFailure
Process Name: w3wp
Process ID: 4284
AppDomain Name: /LM/W3SVC/560632691/ROOT-1-130519915587486075
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:3
Affected Endpoint:
http://spapp1:32843/3f215b603e634a629875945488863f75/ProfileService.svc
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
    <EventID>8313</EventID>
    <Version>15</Version>
    <Level>2</Level>
    <Task>13</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-08T23:11:54.738080000Z" />
    <EventRecordID>14550</EventRecordID>
    <Correlation ActivityID="{02A1AC9C-1125-6026-E124-A52653003266}" />
    <Execution ProcessID="4284" ThreadID="16072" />
    <Channel>Application</Channel>
    <Computer>spapp1</Computer>
    <Security UserID="S-1-5-21-499312637-3451022336-10712144539-44056" />
</System>
<EventData>
    <Data Name="string0">EndpointFailure</Data>
    <Data Name="string1">w3wp</Data>
    <Data Name="int2">4284</Data>
    <Data Name="string3">/LM/W3SVC/560632691/ROOT-1-130519915587486075</Data>
    <Data Name="int4">2</Data>
    <Data Name="string5">urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc</Data>
    <Data Name="int6">1</Data>
    <Data Name="int7">3</Data>
    <Data Name="string8">http://spapp1:32843/3f215b603e634a629875945488863f75/ProfileService.svc</Data>
</EventData>
</Event>
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Foundation
Date:          8/8/2014 6:51:04 PM
Event ID:      8313
Task Category: Topology
Level:         Error
Keywords:
User:          VANTAGE\sp_farm
Computer:      spapp1.vantage.local
Description:
A failure was reported when trying to invoke a service application: EndpointFailure
Process Name: OWSTIMER
Process ID: 8472
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:3
Affected Endpoint:
http://spapp2:32843/3f215b603e634a629875945488863f75/ProfileService.svc
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
    <EventID>8313</EventID>
    <Version>15</Version>
    <Level>2</Level>
    <Task>13</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-08T23:51:04.938901900Z" />
    <EventRecordID>14596</EventRecordID>
    <Correlation />
    <Execution ProcessID="8472" ThreadID="17360" />
    <Channel>Application</Channel>
    <Computer>spapp1.vantage.local</Computer>
    <Security UserID="S-1-5-21-499312637-3451022336-10712144539-44056" />
</System>
<EventData>
    <Data Name="string0">EndpointFailure</Data>
    <Data Name="string1">OWSTIMER</Data>
    <Data Name="int2">8472</Data>
    <Data Name="string3">DefaultDomain</Data>
    <Data Name="int4">1</Data>
    <Data Name="string5">urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc</Data>
    <Data Name="int6">1</Data>
    <Data Name="int7">3</Data>
    <Data Name="string8">http://spapp2:32843/3f215b603e634a629875945488863f75/ProfileService.svc</Data>
</EventData>
</Event>
20:22:31.94 SharePoint Portal Server User Profiles cm6y High
User Profile Application Proxy failed to retrieve partitions from User Profile Application: Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: UserProfileApplicationNotAvailableException_Logging
:: UserProfileApplicationProxy.ApplicationProperties ProfilePropertyCache does not have 6cd1c1f0-5874-4f8e-9c0a-ed1aff342048     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs()     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext)
20:22:38.16 SharePoint Portal Server User Profiles d22b High
Failure retrieving application ID for User Profile Application Proxy 'User Profile Service Application': Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: UserProfileApplicationNotAvailableException_Logging
:: UserProfileApplicationProxy.ApplicationProperties ProfilePropertyCache does not have 6cd1c1f0-5874-4f8e-9c0a-ed1aff342048     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_AppID()
20:22:44.25 SharePoint Foundation DistributedCache ah24v High
[Forced due to logging gap, cached @ 08/08/2014 20:22:38.16, Original Level: Verbose] DistributedCacheClient TransportProperties- ChannelInitializationTimeout '{0}', ConnectionBufferSize '{1}',
MaxBufferPoolSize '{2}', MaxBufferSize '{3}', MaxOutputDelay '{4}',ReceiveTimeout '{5}'.
20:22:55.26 SharePoint Foundation DistributedCache ah24w Unexpected
Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache' - Exception 'Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0006>:There
is a temporary failure. Please retry later. (One or more specified cache servers are unavailable, which could be caused by busy network or servers. For on-premises cache clusters, also verify the following conditions. Ensure that security permission has been
granted for this client account, and check that the AppFabric Caching Service is allowed through the firewall on all cache hosts. Also the MaxBufferSize on the server must be greater than or equal to the serialized object size sent from the client.). Additional
Information : The client was trying to com...

Thanks for the suggestion. I performed the service restarts, and then an iisreset an the two web servers, and the application server that does not run the services. Finally, I ran iisreset on the application server that does run the services.
After performing those steps, I still cannot manage the user profile service application.
ULS log at the time of the attempt contains User Profile Application Proxy errors (in my original post) and am also noticing the following error:
08:15:21.17 SharePoint Foundation General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException:
This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your administrator.     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ManageUserProfileServiceApplicationBase.OnPreRender(EventArgs e)     at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean
includeStag...

User Profile Incremental Sync does not views changes in profiles.

User Profile Incremental Sync does not views changes in profiles. I make full sync - all ok. then I change the phone number for example, and then start incremental sync and nothing moves to AD.
All the stages of FIM sync just state 0 records to process. Looks like it does not see the changes
1.profile property is set up to sync with AD attribute (with EXPORT).
2.no errors in Windows logs or FIM UI client, nor in sharepoint UI
3. sharepoint server 2010 SP1, "CU June 2012" 14.0.6123.5002
4. I have just reprovisioned sync service, set up AD connections and property-attribute relations. before
there was this problem http://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadminhttp://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadmin,
which I resolved by clearing timer service cache.
Help with advice, urls or solurions please..

Hi VlH,
According to your description, the issue can be caused by the Profile or Profile Values table.
You can check the event log and ULS log to see detail error message.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
For your issue you can refer to the similar thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/bc3cd2ff-dc12-4223-a80b-e4cae616e861/user-profile-sync-doesnt-update-the-profiles-from-ad?forum=sharepointadminlegacy
Also a good blog for user profile synchronization:
http://www.harbar.net/articles/sp2010ups.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

User Profile Services - Sync Connection disappearing after a few days - "Moss MA not found"

Similar Messages

Maybe you are looking for