User Profile Synchronization not displaying Title field correctly

Hello,
I've an issue with User Profile Synchronization (SP 2010). The Title field is displaying correctly for most of the users but still there are few user for them the Title field is blank. However in "User Information List" it displays the Title field
properly for those users. But in Central Administration when I check the User Profiles it's blank.I have already run Full Profile Synchronization few times in Central Administrations. Every time it's shows as successful but still no luck, still the Title field
is blank for some profiles.
Can anybody help on this? Thanks in advance.

Hi ,
Firstly , I need to verify the followings:
Whether the title field of user information list is changed if you type a value in user profile page and perform full sync.
Whether you have upgraded to SharePoint 2010.
If you have upgraded to SharePoint 2010, you need to make sure the user information list is mapped or connected to AD directly. More information, please refer to the post below:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/926abf50-83a0-4e9c-a4cb-4848fcf4f88d/sharepoint-2010-userprofile-title-field-empty?forum=sharepointgeneralprevious
If this issue still exists, please create a new User Profile Services Application, and compare the result.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/0b9b5747-80b2-4a2e-8e8e-c918bc9d6cbd/user-profile-synchronization-not-working-correctly?forum=sharepointadmin
http://blog-sharepoint.blogspot.in/2010/08/user-information-list-not-synchronised.html
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

  • User profile service not updating 'Title' in user information list

    Hi,
    In our SharePoint farm, following two user profile sync timer jobs are successfully running but not updating the 'Title' in the hidden user information list.
    User Profile to SharePoint Full Synchronization
    User Profile to SharePoint Quick Synchronization.
    Can someone point me to the right direction? Please note that I don't want to use powershell script shown here to update the 'Title' in the user information list -
    http://blog.falchionconsulting.com/index.php/2011/12/updating-sharepoint-2010-user-information/.
    Thanks,
    Manvir
    Manvir

    Hi,
    There are two jobs, User Profile to SharePoint Quick Sync and User Profile to SharePoint Full Sync, that synchronize the User Profile database information with the user information list. Sometimes this stops working (properly) and in that case
    you need to run:
    Stsadm.exe –o sync –listolddatabases 0
    Stsadm.exe –o sync –deleteolddatabases 0
    The first command will display all the databases and when they have been sync’d last.
    The second command will delete the records corresponding to those databases (it doesn't delete databases/end user data).
    Anyways, running this will basically tell the timer jobs that they have never sync’d and force them to carry on as if it’s the first time.
    Go to Central Admin and fire off the User Profile to SharePoint Full Synchronization
    job.
    For detailed information, refer to the following article:
    https://donalconlon.wordpress.com/2012/03/02/sharepoint-user-information-list-is-not-being-updated/
    Best Regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Stack overflow user profile doesn't display correctly

    The page of Stack overflow user profile is wrongly displayed, blank space on top of page and some info is hidden.

    I see what you mean. It appears that the drop-down which says "Summary" is pushing that block of content off to the right (sometimes you can see a sliver of it at the right edge of the page). That problem doesn't occur in the stock Android (2.3.4) browser.
    If I use a Fennec useragent string in the User Agent Switcher extension, I can replicate the problem on a desktop browser (''Firefox 13 beta 4''). The drop-down is floated within a container that uses 100% of the width of the screen. The next element floats up alongside the <select> rather than dropping down beneath it because that next element doesn't have a specified width or minimum width.
    StackOverflow can solve this problem by editing its CSS to include a clearing rule:
    <br>.inner-wrap {
    padding: 5px;
    overflow: auto;
    '''clear: left;'''
    However, as end users, I don't know whether there is anything we can do.
    This problem has appeared in sites for years, and it seems unlikely that Firefox will change the way it handles floats to work around developers who forget to clear them. (Guessing as to what the developer must have wanted was something that IE did for years, but I think even Microsoft is starting to require developers to pay closer attention.)

  • Temp-Contract Worker User Profile Synchronization in SharePoint 2013

    Hi All,
    I was wondering if anyone could provide some feedback on what is the best practice for configuring Temp or Contract worker user profile services in SharePoint 2013. We have had lot of issues within MySites when we make these types of workers AD account inactive
    and then active again when they come back on projects. The user profile synchronization does not work correctly and MySites has issues loading the profile etc. Also in the same context are there best practices for Name/Title/Department changes as well. 
    thank you for your feedback!
    AJ
    Ajay Mandal

    Given what you describe I assume you've created a user profile Sync connection filter to remove disabled AD accounts from the user profile sync.  That's why you are running into problems.  When a user is missing from the import their profile is
    deleted within an hour or so, but their MySite isn't deleted for 14 days (to allow time for a manager to clean it off).  If the user is reactivated within the 14 day period their old mySite is still there, but is no longer referenced by the new profile
    that is created.  So When the user goes to their profile it tries to create a new mySite where one already exists.  It can't do that.
    The same thing will happen if you delete the contractor's user account, but then recreate them in AD when they return.  The only way to fix it is to make sure both the profile and mySite site collection in /Personal/ have been deleted before re-adding
    an old contractor.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • FIM EVENT ID 3 when starting User Profile Synchronization service

    I am having issues getting the USP Sync Service to start correctly in our 2013 Farm.  
    We are using a named instance for this install and from what I have read, it looks like that is the issue.
    In the ULS I find this error "ERROR  ILMPostSetupConfiguration: ILM Configuration: Validating installation of SQL Service FAILED ."
    The event log shows this error: 
    .Net SqlClient Data Provider: System.Data.SqlClient.SqlException: HostId is not registered
       at Microsoft.ResourceManagement.Utilities.ExceptionManager.ThrowException(Exception exception)
       at Microsoft.ResourceManagement.Data.Exception.DataAccessExceptionManager.ThrowException(SqlException innerException)
       at Microsoft.ResourceManagement.Data.DataAccess.RetrieveWorkflowDataForHostActivator(Int16 hostId, Int16 pingIntervalSecs, Int32 activeHostedWorkflowDefinitionsSequenceNumber, Int16 workflowControlMessagesMaxPerMinute, Int16 requestRecoveryMaxPerMinute,
    Int16 requestCleanupMaxPerMinute, Boolean runRequestRecoveryScan, Boolean& doPolicyApplicationDispatch, ReadOnlyCollection`1& activeHostedWorkflowDefinitions, ReadOnlyCollection`1& workflowControlMessages, List`1& requestsToRedispatch)
       at Microsoft.ResourceManagement.Workflow.Hosting.HostActivator.RetrieveWorkflowDataForHostActivator()
       at Microsoft.ResourceManagement.Workflow.Hosting.HostActivator.ActivateHosts(Object source, ElapsedEventArgs e)
    The server was set up with a sql alias and we also added an alias for the server itself.   Based on the below links, I did verify that the SQLInstance is empty in the registry.  
    I am at a loss on what to try next to get this working.  As a side note, I just noticed the dev farm we have (which I didn't set up) does not have the UPS configured.  I have seen references that state the only FIM  2010 SP1 works with SharePoint
    2013 and am currently investigating updating the version on our server to SP1.
    all help is appreciated!  
    Thanks,
    Natalie
    References:
    https://translate.google.com/translate?sl=es&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fmsmvps.com%2Fblogs%2Fhaarongonzalez%2Farchive%2F2013%2F03%2F07%2Funa-raz-243-n-mas-por-la-cual-no-inicializa-la-aplicaci-243-n-de-servicio-de-perfiles-de-usuario-de-sharepoint-2010.aspx&edit-text=
    http://sharepoint.licomputersource.com/2010/07/23/installing-and-configuring-user-profile-synchronization-service-in-sharepoint-2010-2/
    NLewis

    Have you tried restarting the server hosting the FIM instance?
    http://blogs.msdn.com/b/akhawaja/archive/2010/03/24/forefront-identity-manager-hostid-is-not-registered.aspx
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Anyone tried using LDIF file in the User Profile Synchronization Process?

    Microsoft pushied an article recently talking about using LDIF file in the SharePoint's user profile synchronization. 
    Configure profile synchronization using a Lightweight Directory Interchange Format (LDIF) file (SharePoint Server 2010) http://technet.microsoft.com/en-us/library/ff959234.aspx
    Currently I am unable to obtain the required "Replicate Directory Change" permission set up by the AD admin.  So I thought of exploring this alternative since I still have AD search permission right now.
    So far, I was able to set up the MOSSLDAP-LDIFMA, and use an import.ldif file to add, remove and update user profiles.  However, there are some problems that I can't resolve.  One of key problems is, the LDIF-imported records can't be
    sync'd with login-based records.
    In my environment, when a user login SharePoint via Windows authentication, a new profile would be added, under the account name "domain\username".  Meanwhile, when an LDIF record imported, there will be another profile created under the account
    name "domain:domain\username", or "domain:username".  That is, there would be two profiles for each user.
    Based on my understanding, it is very likely the user profile synchronization is based on the user's account name.  But in document and sample files provided, I can't find out any clue how to prepare the ldif file so that it will update the
    matching records, instead of creating new ones.
    Any help?  Thanks in advance.

    Has anyone managed to get this to work?
    It's nice that Microsoft offers the ability to import user profiles via LDIF into SharePoint, but it is useless if the account name is not correct after the import. I have tried multiple imports from the LDIF to get a user account to show up as  "domain\username" but
    it always ends up as "domain:domain\username", or "domain:username".  or a variation
    of these 2 with a colon separating the domain form the username. i see that multiple people have had the same problem, but unfortunetaly can't seem to find a solution. Also I see Bradley mentions that he was able to import accounts using get-QADUser,
    but he doesnt mention what the accounts import as or if it resolved the domain colon issue.
    Thanks in advance for any help or information anyone can provide.
    cheers,
    Zed

  • User profile synchronization service wont start after SharePoint Service pack SP2

    Hi
    -Using SharePoint 2010 with 1 appserver and 2 frontend webservers on Service Pack2. (ms server 2008r2, SQLServer2008r2).
    -Farmaccount has been set to local admin on all sp servers.
    -Firstly, the User Profile Service Application runs fine and is started. Dont mix it with the User profile synchronization Service.
    Prior to installing SP2 User profile service application and user profile synchronization service were running fine.
    The first thing I did after the installation of SP2 was running the:
    -psconfig -cmd upgrade -inplace b2b -wait
    As SharePoint setup user (spadmin).
    This ran fine on the 2 front end web servers.
    However i got one fault on the Appserver:
    I have also tried:
    PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
    which led to same resulting error.
    So I tried to start the Use profile synchronization service as suggested manually by logging on with the Farmaccount, starting the user profile synchronization service through Central Administration. This led to Stuck on Starting status. 
    The windows services Forefront had status starting, then stopped.
    One question:
    Prior to starting the User profile synchronization service through Central Administration. What account and startup status should the 2 Forefront Windows Services have? (Automatic and local system?) or (Automatic and Farmaccount?) or (Disabled and Local
    system?) or (Disabled and farmaccount?). Because i know that SharePoint UPA will provision these services though Central Administration. However what is the default state prior to starting the Synchronization service?
    So i continue...
    Since it was stuck on starting i stopped it with:
    stop-SPServiceInstance -identity <upaSyncguid>
    which gave me:
    Stop-SPServiceInstance : An object of the type Microsoft.SharePoint.Administrat
    ion.SPServiceInstanceJobDefinition named "job-service-instance-36bdf2ef-58f2-45
    e5-8f78-ab75f646611a" already exists under the parent Microsoft.SharePoint.Admi
    nistration.SPTimerService named "SPTimerV4". Rename your object or delete the
    and i could fix with:
    #Stop the stopping:
    stsadm -o provisionservice -action stop -servicetype "Microsoft.Office.Server.Administration.ProfileSynchronizationService, Microsoft.Office.Server.UserProfiles,
    Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" -servicename FIMSynchronizationService
    I also removed the forefront certificate from personal - certificate store, as this is provisioned when user profile synchronization service is provisioned.
    That set the Central Administration Status on the User profile synchronization Service to disabled. Fine.
    Everytime i tried to start the user profile synchronization service (logged on as farmaccount), left it for 10-15 min and did iisreset and restart sharepoint timer service, and also tried rebooting the appserver. No change.
    A thought, is it important to restart timer service and do iisreset on the two frontend servers after trying to start the user profile synchronization service on the appserver?
    I'm getting to the point were i just want to delete the whole service application and set it up anew...
    any tips will be greatly appreaciated.
    brgs
    Bjorn

    You're very welcome, hope it helped, if not the I suggest you clear the configuration cache as follows.
    The config cache is where config settings are stored locally on the Microsoft SharePoint server, so a SQL call isn’t required.
    To clear the cache:
    Stop the SP Timer service. To do this, follow these steps:
    Click Start, point to Administrative Tools, and then click
    Services.
    Right-click SharePoint 2010 Timer, and then click Stop.
    Close the Services console.
    On the computer that is running Microsoft SharePoint Server 2010 and on which the Central Administration site is hosted, click
    Start, click Run, type explorer, and then press ENTER.
    In Windows Explorer, locate and then double-click the following folder:
    %SystemDrive%\ProgramData\Microsoft\SharePoint\Config\GUID
    Notes
    The %SystemDrive% system variable specifies the letter of the drive on which Windows is installed. By default, Windows is installed on drive C.
    The GUID placeholder specifies the GUID folder. There may be more than one of these.
    The ProgramData folder may be hidden. To view the hidden folder, follow these steps:
    On the Tools menu, click Folder Options.
    Click the View tab.
    In the Advanced settings list, click Show hidden files and folders under
    Hidden files and folders, and then click OK.
    You can also simply type this directly in the path if you do not want to show hidden files and folders.
    Back up the Cache.ini file. (Make a copy of it. DO NOT DELETE THIS FILE, Only the XML files in the next step)
    Delete all the XML configuration files in the GUID folder (DO NOTE DELETE THE FOLDER). Do this so that you can verify that the GUID folders content is replaced by new XML configuration files when the cache is rebuilt.
    Note When you empty the configuration cache in the GUID folder, make sure that you
    do NOT delete the GUID folder and the Cache.ini file that is located in the GUID folder.
    Double-click the Cache.ini file.
    On the Edit menu, click Select All.
    On the Edit menu, click Delete.
    Type 1, and then click Save on the
    File menu. (Basically when you are done, the only text in the config.ini file should be the number 1)
    On the File menu, click Exit.
    Start the Timer service. To do this, follow these steps:
    Click Start, point to Administrative Tools, and then click
    Services.
    Right-click SharePoint 2010 Timer, and then click Start.
    Close the Services console.
    Note The file system cache is re-created after you perform this procedure. Make sure that you perform this procedure on all servers in the server farm.
    Make sure that the Cache.ini file in the GUID folder now contains its previous value. For example, make sure that the value of the Cache.ini file is not 1.
    Check in the GUID folder to make sure that the xml files are repopulating. This may take a bit of time.
    BRGS
    Mishagri

  • SharePoint 2013 User Profile Synchronization service problem

    After one week trying (three clean installs of SharePoint 2013), I haven't succeed to start "User Profile Synchronization service".
    Environment:
    Domain environment with two Windows Server 2012 R2 domain controllers. 
    Fully qualified domain name matches NetBIOS name (domain.com - DOMAIN)
    Two tiers: SQL Server 2014 enterprise on Windows Server 2012 R2, and SharePoint 2013 SP1 on Windows Server 2012 R2.
    I'm using named SQL instance for SharePoint (<SQLSRV>\<SHAREPOINT>), and SQL alias on SharePoint app server.
    All SharePoint prerequisites are installed successfully.
    SharePoint 2013 is installed successfully.
    Hotfix 2760265 is installed (before configuring SharePoint)
    SharePoint is configured successfully
    Preparing MySites host:
    MySites web application is created with separate AppPool, and with address https://my.domain.com.
    Certificate used is wild-card cert (*.domain.com), issued by trusted local PKI
    Managed path "personal" is created
    Site collection of type "My Sites Host" is created at root path
    "Self-Service Site Creation" is enabled for https://my.domain.com web application
    Farm account permissions:
    Local admin at SharePoint application server
    "Log on locally" at SharePoint application server
    "Replicate Directory Changes" at domain level
    I've even tried with adding farm account into domain admins group :)
    After trying to to start user profile synchronization service, service is in "starting" state about 5-10 min, and then returns to "stopped" state. 
    ULS log shows the following exceptions:
    ILM Configuration: Error 'ERR_CONFIG_DB'
    UserProfileApplication.SynchronizeMIIS: Failed to configure MIIS post database, will attempt during next return. Exception: System.Configuration.ConfigurationErrorsException: ERR_CONFIG_DB
    UserProfileApplication.SynchronizeMIIS: Failed to configure MIIS post database, will attempt during next return. Exception: System.NullReferenceException: Object reference not set to an instance of an object
    Event viewer log:
    Event ID 6398, The Execute method of job definition Microsoft.Office.Server.UserProfiles.LMTRepopulationJob (ID <guid>) threw an exception. Unexpected exception in FeedCacheService.BulkLMTUpdate: Region not found..
    some perfnet event id 2004 errors
    Troubleshooting:
    I've tried with clearing configuration cache
    Assigning farm account to domain admins group
    Installing form scratch three times, and thousand times from different checkpoints...
    I've saw 'ERR_CONFIG_DB' like million times, but never "Started" next to "User Profile Synchronization service". Does anyone has actually succeeded to start this service? :)
    I would really appreciate any help. Thanks!
    P.S. I can't stop asking myself is it was really necessary to develop such complex, problematic, and log-tells-nothing software just for getting user info from AD? Honestly, after more then decade experience as software developer and software architect -
    I must say I doubt...
    Fat Dragon

    The full packages are available:
    http://blogs.technet.com/b/stefan_gossner/archive/2014/05/08/april-2014-cu-for-sharepoint-2013-has-finally-been-released.aspx
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Cannot extract the embedded font 'F2'. Some characters may not display or print correctly.

    This question was previously published but no answer has been found.
    Error message is :
    "Cannot extract the embedded font 'F2'. Some characters may not display or print correctly."
    Many pdf documents display this error with Adobe Reader 8.1.0. We have errors for embedded fonts 'F0','F3','F7' and so on.
    It looks like a Adobe Reader bug because :
    - All PDF files can be opened with Acrobat Reader 5.0.5, 6.x and 7.x, can't be opened with 8.1.0 version.
    - the 8.1.1 update removes only the bug for 'F0' error message (issue #1572280).
    The solution :
    - to publish a 8.1.2 update to fix this important bug
    - is there a registry parameter or tool option to disable the checking added in 8.x version of Adobe Reader ? The 8.x version catches more errors to be compliant with Adobe specification but Adobe reader must be
    compliant with all documents generated by third party products.
    This Adobe Reader bug applies to Windows Vista, XP Pro SP2, 2000.
    Thx,
    Regards

    Just to let you know, for anyone else with this problem. I had this problem occur on a MAC when you tried to do save to PDF in excel. This was all happening at the point of generation of the PDF in my case.
    The fix was to delete ALL the microsoft preferences, but perahps only the font cache needed to be deleted.
    I deleted the following areas from the local users userprofile on the mac. On windows, I would probably log in as a differnet user to try to see if the problem just exsists for one particular user.
    Here are the sections I deleted:
    Library/caches/metadata/Microsoft*
    Username/library/preferences/com.microsoft* ( and anyhting with microsoft in it)
    I did leave the entourage settings though.
    hope it helps someone with a similar issue.

  • User Profile Sync not working after March CU

    It appears that since installing the March CU for Sharepoint 2013, the user profile service is no longer working correctly. The status for user syncronization is always in a "Stopping" phase and the event logs are reporting the following every
    hour... Do I have to take out the entire service and reinstall it, or is their a way to fix it?
    Log Name:      Application
    Source:        FIMSynchronizationService
    Date:          3/28/2013 1:40:05 PM
    Event ID:      6324
    Task Category: Server
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      xxxx.xxxxxx.com
    Description:
    The server encountered an unexpected error and stopped.
     "BAIL: MMS(2072): sql.cpp(8490): 0x80231334 (The sql connection string has unsupported values.)
    BAIL: MMS(2072): sql.cpp(8533): 0x80231334 (The sql connection string has unsupported values.)
    BAIL: MMS(2072): server.cpp(260): 0x80231334 (The sql connection string has unsupported values.)
    BAIL: MMS(2072): server.cpp(3860): 0x80231334 (The sql connection string has unsupported values.)
    BAIL: MMS(2072): service.cpp(1539): 0x80231334 (The sql connection string has unsupported values.)
    ERR: MMS(2072): service.cpp(988): Error creating com objects. Error code: -2145184972. This is retry number 0.
    BAIL: MMS(2072): clrhost.cpp(283): 0x80131022
    BAIL: MMS(2072): scriptmanagerimpl.cpp(7670): 0x80131022
    BAIL: MMS(2072): server.cpp(251): 0x80131022
    BAIL: MMS(2072): server.cpp(3860): 0x80131022
    BAIL: MMS(2072): service.cpp(1539): 0x80131022
    ERR: MMS(2072): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 1.
    BAIL: MMS(2072): clrhost.cpp(283): 0x80131022
    BAIL: MMS(2072): scriptmanagerimpl.cpp(7670): 0x80131022
    BAIL: MMS(2072): server.cpp(251): 0x80131022
    BAIL: MMS(2072): server.cpp(3860): 0x80131022
    BAIL: MMS(2072): service.cpp(1539): 0x80131022
    ERR: MMS(2072): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 2.
    BAIL: MMS(2072): clrhost.cpp(283): 0x80131022
    BAIL: MMS(2072): scriptmanagerimpl.cpp(7670): 0x80131022
    BAIL: MMS(2072): server.cpp(251): 0x80131022
    BAIL: MMS(2072): server.cpp(3860): 0x80131022
    BAIL: MMS(2072): service.cpp(1539): 0x80131022
    ERR: MMS(2072): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 3.
    BAIL: MMS(2072): service.cpp(1002): 0x80131022
    Forefront Identity Manager 4.0.2450.49"

    I had rebooted days ago... I have rebooted a couple of times today before posting here... Didn't help...
    I found a procedure on another link that looked like it would reset the syncronization database, but that doesn't appear to have worked out any better. The procedure was a follows:
    $syncDBType = "Microsoft.Office.Server.Administration.SynchronizationDatabase"
    $upaSAType = "User Profile Service Application"
    $syncDB = Get-SPDatabase | where-object {$_.Type -eq $syncDBType}
    $upa = Get-SPServiceApplication | where-object {$_.TypeName -eq $upaSAType}
    $syncDB.Unprovision()
    $syncDB.Status = "Offline"
    $upa.ResetSynchronizationMachine()
    $upa.ResetSynchronizationDatabase() 
    $syncDB.Provision() 
    restart-service SPTimerV4 
    This appears to have completely reset the syncronization database to the point where I don't even see tables and views any more in that database. That sounded good, but the "User Profile Synchronization Service" wont start and it doesn't appear to be able
    to provision the database. I am trying to start the service using the farm account and I know the password is good...

  • User Profiles Synchronization Error Event id 5553 - Every hour

    I am getting these 2 events logged in the event viewer when the user profile synch is attempted: 
    First event:
    Second Event: (although we don't always get this error with the one above)
    failure trying to synch site 6c02f82c-2029-4ca0-990b-d14786b95d88 for ContentDB 8185106e-233e-4302-bbc5-d0fb2252c64a WebApp 2b659ceb-e7b4-46d4-b2a1-1a9679a357c3. Exception message was Cannot insert duplicate key row in object 'dbo.UserMemberships' with
    unique index 'CX_UserMemberships_RecordId_MemberGroupId_SID'.
    The statement has been terminated..
    Does anyone know why this is happening and how it can be fixed?
    failure trying to synch site a12d2e6b-8227-45cd-b232-594f70d1abd1 for ContentDB 1fa8ce0f-f219-4f43-af9f-c5dc57257f4d WebApp 54c24445-8543-493c-857b-5a57df27c722. Exception message was Procedure or function profilesynch_MS_DeleteWeb has too many arguments
    specified.
    The 'profilesynch_MS_UpdateWeb' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be returned instead..

    When I run the stsadm -o sync -deleteolddatabases 5  <- no matter whst number is here I get:
     "A failure occurred during the processing of this command. Check diagnostic logs  for more information."
    There is nothing in the ULS logs
    Same problem here.
    Hoping this will fix a slightly different issue though. My issue is the profile doesn't update with changes in Active Directory and therefore there isn't anything new for the content databases
    to sync with.
    If I delete my personal profile in the UPS Service -> Manage User Profiles and then click on MySite -> MyProfile it recreates my profile with the new Active Directory values
    (without having to do a UPS Sync) and I don't know why these values exist but of cause in doing this I lose all the non AD imported values.
    I've been working on this for nearly a week now. I've learnt a lot about the UPS but still no solution. Great article on how the Sync works by the way if anyone is interested can be found here
    http://blogs.msdn.com/b/spsocial/archive/2010/05/04/conceptual-view-of-how-user-profile-synchronization-works-in-sharepoint-2010.aspx
    I have been recommended to perform stsadm -o sync -deleteolddatabases in the following post but I am unable to do so.
    http://social.technet.microsoft.com/Forums/en-US/sharepointadmin/thread/bc3cd2ff-dc12-4223-a80b-e4cae616e861

  • How to start user profile synchronization services

    Hi i am not able to start "user profile synchronization service"
    When i click on Start user profile, it will show starting, after few minutes again it will stop.
    How to resolve this

    Check permission of service account used for the user profile/sync service application.
    Ref link: http://social.msdn.microsoft.com/Forums/en-US/9062721a-4066-42f9-bd90-8c2376abad5e/user-profile-synchronization-service-got-stuck-in-starting-mode-and-stops-after-a-few-minutes?forum=sharepointadminprevious
    Thanks, Pratik Shah

  • Error - The registration of the service "User Profile Service" has failed. The user profile can not be loaded

    I am running an environment with an Active Directory and Terminal Servers.
    I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further.
    The fixes I found are related to local users only.
    When I create a new user in the Active Directory I provide the paths to the profile folder in the "Remote Desktop Profile" and "Profile tab"  lets say for example \\ad001\home\%username% and \\ad001\profil\%username% .
    I give rights to the user to read/write the "home" folder which is mapped for folder redirection.  An I know that when the user first logs on it should create a "v2.%username%" folder upon successful logon.  This is when I am
    presented with the error message below:
    "The registration of the service "User Profile Service" has failed. 
    The user profile can not be loaded"
    Does anyone have any experience with this or know a suitable fix.  Again this is for the "Roaming" profile creation no local.
    Many thanks in advance.

    Hi,
    Thank you for posting in Windows Server Forum.
    Did you receive for any one user or for all users?
    Have you tried to solve the issue by fixing the user account profile?
    For that you can adjust the registry setting “ProfileImagePath” with
    particular SID of that user under below mention path.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    Also if this can’t resolve the issue you can try to delete the SID of that user or renaming the old and and then check the result again by creating new profile for that users.
    More information.
    You receive a "The User Profile Service failed the logon” error message
    http://support.microsoft.com/kb/947215
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Error message from Adobe Reader. cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly. Print looks like gibberish

    Trying to view/print PDF documents from website. Print looks like gibberish and is unreadable. Problem is with the embedded fonts. Error message from Adobe says cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly.

    Try Adobe support, that's not a Firefox support issue. <br />
    http://forums.adobe.com/index.jspa

  • Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

    I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
    I have tried Acrobat 9, 10 and 11.
    Any advice (apart from use Windows 7! ) would be most welcome.
    Many thanks.

    If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
    Is this a local or online PDF?
    If local, is the file really exactly the same?
    If online, in what browser?

Maybe you are looking for