User profiles for analyzer and query designer

Hello,
I have one short question about user-profiles.
Which user-profile should I best use for a user, who should just use the BEx Analyzer and which profile does a user need for using BEx Analyzer + BEx Query Designer.
Thanks

I just need the SAP-Roles which allows a user to use Analyzer and Query Designer.

Similar Messages

  • Errors in BeX Analyzer and Query Designer NW2004S

    Hi All, these are the problems -
    1) We have installed the FrontEnd and applied SP 1. But when I am trying to
    use the Analyzer, the Menu Options are not working. Please give us a
    solution to this problem.
    2) In Query Designer, when we do drag and drop, the query designer hangs and we need to close the query designer .
    3) In Query Designer, if we try to make some changes to an existing query and try to save
    we have the following error message -
    'Terminate - The system tried to insert a data record, even though a
    data record with the same primary key already exists.
    Terminate - Program error is class SAPMSSY1 method: UNCAUGHT_EXCEPTION'
    Any help will be appreciated.
    Best Regards,
    Rajib

    Hi
    The Frontend version is 7.1. So far as I know, only SP 1 is available for version 7.1.
    I have got answer for Question 1 - Answer is in SAP Note 1025122.
    Still the other questions are unaswered.
    Thanks, Rajib

  • Report Designer  and Query Designer in BI 7.0

    Hi friends,
          what is the use of  Report Designer  and Query Designer.. and what is the difference between  these two..
        I know about  Analyser... that is used for designing a query and we can analyse (or) see the result of that query in that  window....
         then what is  the use of Query Designer... can you  give me the brief  introduction abt that...  if any documents plz farword  to me..
    my mail id--- [email protected]
    thanks
    @jay

    Hi Ajay,
    Report Designer is a newly added feature in BI 7. This helps to do cosmetic changes to the report, change the fonts, add colors etc. Please check this link for more info on Report designer.
    http://help.sap.com/saphelp_nw04s/helpdata/en/17/16d941de405f24e10000000a1550b0/frameset.htm
    Query Designer, is where you develop, edit your queries.
    Analyzer, is where you execute the query and analyze the results.
    Hope this helps.

  • Need transaction code for opening Bex query designer?

    Hi ALL,
      Can anyone help me with the transaction code for opening Bex query designer?
      Like RRMX for Bex Analyzer similarly i want for Bex query designer.
    Thanks & Regards
    Sameer Khan

    THERE IS NO TCODE FOR QUERY DESIGNER. BUT THERE IS AN ALTERNATIVE..
    OPEN BEX ANALYSER THROUGH RRMX
    OPEN A QUERY
    CLICK ON TOOLS-> EDIT QUERY
    THIS OPENS QUERY DESIGNER AND YOU CAN USE IT NORMALLY..

  • Cannot select ldap user profile for SGD Global Admin

    Hi all,
    I'm trying to select some ldap users to be in the SGD Global Administrators role, but I am unable to check the check box next to the user profile once I navigate to the account. There is no check box to check.
    I am actively using LDAP for regular user auth and application assignment, so I know my LDAP "works" in that sense, I just can't use it to assign global admins.
    Any thoughts?
    Adam

    The only way to do this is to create a user profile for the (would-be) admin account. And since they're an LDAP user, you'll have to use LDAP mirroring to do this. For example, let's say the user you want is "cn=Joe Admin, ou=Users, dc=example, dc=com"
    Go to "User Profiles", and browse to/open:
    dc=com
    cd=example
    create the directory object "ou=Users"
    Inside of "ou=Users", create the user profile object "cn=Joe Admin"
    Add this user object to the Global Administrators role.
    http://docs.sun.com/source/820-4907/chapter3.html#d0e13589

  • How to fix Workflow failed to get user profile for user:

    hi All,
    How to fix Workflow failed to get user profile for user when using Lookup function in sharepoint designer?

    Try to use “As string” instead of “Login Name” for the “Return field as”.
    Regards,
    Jayant
    jayant prabhakar

  • Create unique user profiles for each separate session

    Hi,
    How can I configure TS environment so that each user (who logs onto Windows using the same generic Windows user ID) gets their own unique Windows user profile.
    For example, imagine a scenario where the users are logging onto Windows using the shared user "SYSTEMAPP"
    The intention is to configure the TS server's Windows, so that it creates unique user profiles for each separate session, for example:
    - SYSTEMAPP
    - SYSTEMAPP.000
    - SYSTEMAPP.001
    - SYSTEMAPP.002 (etc...)
    The server version for TS is Windows Server 2012 and not joined to AD. User IDs are created at Local Users and Groups.
    Kindly advise.

    Hi Susie,
    Just to illustrate my point further. Let's say a user logged into the server using user ID SYSTEMAPP for the first session. So, if
    you browse the folders in the server, you'll be able to see this:
    C:\Users\SYSTEMAPP
    Then, another user logged into the same server as SYSTEMAPP user using other session. In this case, my intention is to configure the
    server to create another unique user profile as below:
    C:\Users\SYSTEMAPP.000
    Subsequently, if more users logged in using the same account, the unique counter number will keep on adding...
    C:\Users\SYSTEMAPP.001
    C:\Users\SYSTEMAPP.002
    C:\Users\SYSTEMAPP.003
    Previously, I checked from my third party software vendor that this can be done but I still cracking my head on this which is why led me
    to this forum.
    Kindly advise.

  • User Profiles being created and not using existing

    I have a Windows Embedded 8 thin client.  It will create a user profile when a user logs on and if they log off and log back on it will use the same created profile.  However if we restart the thin client and go to log on it will create a completely
    new profile for the user. It does this every single time it is restarted and a user logs on.  So under the users folder it will have several copies of profiles for that user adding something to it each time.  Example: Username, Username.Domain, Username.Domain.000,
    Username.Domain.001 We have turned off the netXclean to keep it from removing the user profile at logoff.  I have added the C:\Users folder to the write filter exclusion list to make sure it is allowed to write to that location.  What would cause
    it to not use the exisiting user profile for a user and recreate one only after a restart?  It is a soft restart/shutdown we aren't hard powering off as I could see the user profile getting corrupted if that were to happen.
    Luke

    Hi,
    It seems like your account log as temporary profile. Please navigate to the registry below and delete the effected profile's subfolder for test.
    HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    Here is another thread that have multiple talking about Temporary profile, maybe helpful with your problem.
    http://social.technet.microsoft.com/Forums/windows/en-US/5ec0b949-effa-4e30-ba09-dc948a4c7a8b/windows-7-starting-with-a-temporary-profile
    Roger Lu
    TechNet Community Support

  • Worflow failed to get user profile for user

    I have a workflow that sends an email to a user.  In the workflow email, one line has the lookup [%User Profiles:Name%], with Return field "As String" of the list item Field "Account Name" with Value "Current Item:Created By".
    This workflow works for everyone, except it Errors when one user creats an item in this list.  The error is "Workflow failed to get user profile for user...  System Account - An error has occurred in Workflow Name"
    and more detailed error found in logs: "AutoStart Workflow: Microsoft.SharePoint.SPException: Recursive workflows are not permitted.     at Microsoft.SharePoint.Workflow.SPWorkflowAutostartEventReceiver.<>c__DisplayClass1.<AutoStartWorkflow>b__0(SPSite
    superUserSite, SPWeb superUserWeb)
    System.InvalidOperationException: Workflow failed to get user profile for user:domainName\username.     at Microsoft.Office.Workflow.Actions.UserProfileHelper.GetProfile(String propertyName, String user)     at Microsoft.Office.Workflow.Actions.ProfileHelperBase.GetProfileString(String
    propertyName, String userOrOrganization)     at Microsoft.Office.Workflow.Actions.GetUserProfileActivity.Execute(ActivityExecutionContext context)     at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity,
    ActivityExecutionContext executionContext)     at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)     at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime
    workflowCoreRuntime)     at System.Workflow.Runtime.Scheduler.Run()  "
    When I run "get-addomain -identity [FQDN]", I noticed that our DNSRoot has a totally different name than our NetBIOSName, so I followed this article and made sure to set netbiosdomainnamesenabled to TRUE:
    http://meandmysharepoint.blogspot.ca/2012/09/netbiosdomainnamesenabled-and.html
    To give you an idea of our setup, our DNSRoot is "abc.domain.com" and our NetBIOSName is "TESTING"; 2 totally different names.  When I run "get-addomain -identity [FQDN]", the Name field is: "abc" (just the first
    part of the DNSRoot); therefore, when I look up this user's profile in Sharepoint Manage User Profiles, his account shows as "abc\username" when it should be "TESTING\username".
    I did an IISReset, and I ran a Full Profile Sync. But the workflow still Errors for this user.
    Any ideas how to fix this?  Should I delete MySites and User Profile Service application and recreate them?
    Any tips would be appreciated.
    thanks!

    Hi,
    According to your description, my understanding is that the error occurred when sending an email to the user in workflow.
    Did you delete the existing Connections before setting NetBiosDomainNamesEnabled?
    If not, I recommend to delete and recreate your AD connections, then set NetBiosDomainNamesEnabled to true.
    Or you can delete the original User Profile Service Application and create a new one, then set the NetBiosDomainNamesEnabled to true and start the User Profile Service Application
     synchronization.
    More reference:
    http://social.technet.microsoft.com/wiki/contents/articles/18060.sharepoint-20xx-what-if-the-domain-netbios-name-is-different-than-the-fqdn-of-the-domain-with-user-profile.aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • I have set up two users, one for myself and one for children.  The computer automatically logs in for the children with no password required.  When the children go to spotlight and type in a search criteria all of my files show up.  How do I prevent this?

    I have set up two users, one for myself and one for children.  The computer automatically logs in for the children with no password required.  When the children go to spotlight and type in a search criteria all of my files show and open up.  How do I prevent this?

    Log in to your account, and move all your files to your home folder. No other users should be able to access them there and they won't show up with a Spotlight search.
    Make sure your kids' account(s) do not have admin privileges.

  • Re:User group,info set and Query combination table

    Hi,
      I would like to know the combination table of User group,info set and Query.
    Can any body please respond to my question?
    Regards,
    Suresh Kumar.

    Hi,
    Check the tables starting with AQG*.
    Reward points if useful.
    Regards,
    Atish

  • I have setup a new user profile for myself on my wife's mac. If i authorise it for my content will it remove my wife's authorisation.

    I have set up a separate user profile for myself on my wife's MacBook Air.
    If i authorise this Mac for my content for home sharing, will this remove my wife's authorisation.

    Shared iMac, different users, different iTunes accounts - 90 day hold???

  • IBook for Graphic and Web Design

    Hello,
    I'm thinking of buying my sister's iBook (since she doesn't really use it). I was talking to a mac rep about using the iBook for Graphic and Web Design purposes and I wanted to get other people's opinions on how Adobe Creative Suite and Dreamweaver have performed in other people's iBooks.
    Thanks!

    Running a lot of applications simultaneously, or a few high processing type applications such as Adobe's is what takes up RAM. OS X utilizes Hard Drive available space to make up for memory (RAM) deficiencies. This will "slow down" a system's ability to manage the files. So if you like to multiple applications opened at the same time, buy more RAM. Personally, 1 gb ought to be the minimum for today's systems.
    By contrast, a computer's processor, including logic board, video board, etc. are the engine of the system. The iBook has a small engine. So no matter how much RAM you feed it, it's still going to operate like a small engine. If you want more processing power, you would need to purchase a more powerful notebook (eg Power Book) or a more processor oriented machine such as the Intel iMac or Mac Pro.

  • Kerberos Single Sign On and Query Designer for BI forcing user to log in

    Hello experts,
    Our company just implemented SSO using Kerberos for Portal and BI.  However when a user trying to open a query using the Query Designer to connect to the portal, they have to log in again.  Anyone know why?

    Is this for every user or only to certain user?
    also check the browser authentication.  --> Tools --> Internet Options --> Advanced --> Under Security --> Enable Integrated windows authentication.
    /padmanaban

  • OIM 11g Modify User Profile for Updating End Date

    Hi Gurus!
    We have an OIM implementation where users may request the creation of other users by means of a Create User request template. In this template we set the End Date to be 3 months after the request date.
    In order for the requester to extend the period of a user's OIM user account (along with its provisioned resources) we customized a Modify User Profile by displaying the End Date field and automatically populate it again to 3 months after the request date. Also we developed a custom event handler to enable the user when it is disabled and the End Date is updated to a future date.
    This Modify User Profile is working great when the user is still enabled (the End Date is still in the future), however, when the End Date has passed (and the user is Disabled) the requester is not able to see the user when selecting the Modify User Profile request template.
    Is there a way to allow requesters to also see disabled users in the Modify User Profile request template?
    Thank you in advance.
    Regards,

    Hi Kevin,
    thanks for your reply!
    But, in this case, when the user is already disabled due to his End Date, how can a requester, through the Self Service TAB, enable it?
    The Enable User request template does not work since when trying to enable the user, OIM sees the End Date is already passed and the DataSet validation throws an exception.
    The only way I saw was providing a Modify User Profile Request template to change the End Date and developing a custom event handler to enable the user upon the extension of the End Date...
    How can, in this situation, a requester enable the user and extend its End Date?
    Thank you!
    Regards,

Maybe you are looking for