User profiles for different hardware configurations

I have a MacBook that I want to attached to an external monitor and keyboard. Is there a way to configure it so that when I attach the monitor and keyboard it will configure itself so that I can close the lid without it going into standby mode?
I would also want it to go into standby mode when the keyboard and monitor are not attached and the lid is closed.

With iTunes you can create any number of new libraries - See This
Regards

Similar Messages

  • I have setup a new user profile for myself on my wife's mac. If i authorise it for my content will it remove my wife's authorisation.

    I have set up a separate user profile for myself on my wife's MacBook Air.
    If i authorise this Mac for my content for home sharing, will this remove my wife's authorisation.

    Shared iMac, different users, different iTunes accounts - 90 day hold???

  • Create unique user profiles for each separate session

    Hi,
    How can I configure TS environment so that each user (who logs onto Windows using the same generic Windows user ID) gets their own unique Windows user profile.
    For example, imagine a scenario where the users are logging onto Windows using the shared user "SYSTEMAPP"
    The intention is to configure the TS server's Windows, so that it creates unique user profiles for each separate session, for example:
    - SYSTEMAPP
    - SYSTEMAPP.000
    - SYSTEMAPP.001
    - SYSTEMAPP.002 (etc...)
    The server version for TS is Windows Server 2012 and not joined to AD. User IDs are created at Local Users and Groups.
    Kindly advise.

    Hi Susie,
    Just to illustrate my point further. Let's say a user logged into the server using user ID SYSTEMAPP for the first session. So, if
    you browse the folders in the server, you'll be able to see this:
    C:\Users\SYSTEMAPP
    Then, another user logged into the same server as SYSTEMAPP user using other session. In this case, my intention is to configure the
    server to create another unique user profile as below:
    C:\Users\SYSTEMAPP.000
    Subsequently, if more users logged in using the same account, the unique counter number will keep on adding...
    C:\Users\SYSTEMAPP.001
    C:\Users\SYSTEMAPP.002
    C:\Users\SYSTEMAPP.003
    Previously, I checked from my third party software vendor that this can be done but I still cracking my head on this which is why led me
    to this forum.
    Kindly advise.

  • Worflow failed to get user profile for user

    I have a workflow that sends an email to a user.  In the workflow email, one line has the lookup [%User Profiles:Name%], with Return field "As String" of the list item Field "Account Name" with Value "Current Item:Created By".
    This workflow works for everyone, except it Errors when one user creats an item in this list.  The error is "Workflow failed to get user profile for user...  System Account - An error has occurred in Workflow Name"
    and more detailed error found in logs: "AutoStart Workflow: Microsoft.SharePoint.SPException: Recursive workflows are not permitted.     at Microsoft.SharePoint.Workflow.SPWorkflowAutostartEventReceiver.<>c__DisplayClass1.<AutoStartWorkflow>b__0(SPSite
    superUserSite, SPWeb superUserWeb)
    System.InvalidOperationException: Workflow failed to get user profile for user:domainName\username.     at Microsoft.Office.Workflow.Actions.UserProfileHelper.GetProfile(String propertyName, String user)     at Microsoft.Office.Workflow.Actions.ProfileHelperBase.GetProfileString(String
    propertyName, String userOrOrganization)     at Microsoft.Office.Workflow.Actions.GetUserProfileActivity.Execute(ActivityExecutionContext context)     at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity,
    ActivityExecutionContext executionContext)     at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)     at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime
    workflowCoreRuntime)     at System.Workflow.Runtime.Scheduler.Run()  "
    When I run "get-addomain -identity [FQDN]", I noticed that our DNSRoot has a totally different name than our NetBIOSName, so I followed this article and made sure to set netbiosdomainnamesenabled to TRUE:
    http://meandmysharepoint.blogspot.ca/2012/09/netbiosdomainnamesenabled-and.html
    To give you an idea of our setup, our DNSRoot is "abc.domain.com" and our NetBIOSName is "TESTING"; 2 totally different names.  When I run "get-addomain -identity [FQDN]", the Name field is: "abc" (just the first
    part of the DNSRoot); therefore, when I look up this user's profile in Sharepoint Manage User Profiles, his account shows as "abc\username" when it should be "TESTING\username".
    I did an IISReset, and I ran a Full Profile Sync. But the workflow still Errors for this user.
    Any ideas how to fix this?  Should I delete MySites and User Profile Service application and recreate them?
    Any tips would be appreciated.
    thanks!

    Hi,
    According to your description, my understanding is that the error occurred when sending an email to the user in workflow.
    Did you delete the existing Connections before setting NetBiosDomainNamesEnabled?
    If not, I recommend to delete and recreate your AD connections, then set NetBiosDomainNamesEnabled to true.
    Or you can delete the original User Profile Service Application and create a new one, then set the NetBiosDomainNamesEnabled to true and start the User Profile Service Application
     synchronization.
    More reference:
    http://social.technet.microsoft.com/wiki/contents/articles/18060.sharepoint-20xx-what-if-the-domain-netbios-name-is-different-than-the-fqdn-of-the-domain-with-user-profile.aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • User exit for different modules

    Hi Everybody,
      I want to search for all User Exits for different moldules.
    Like for SD, MM.....how can we find that?
    I know there is some way , Goto Se80, then.....
    Please help me guys, its Urgent....
    Will be rewarded.
    Thanks in advance.
    Regards,
    Seevangi

    Hi,
    Go To Se84..
    Give Program Name .
    Display.
    In the Tree U Will Have Option Called Enhancements
    This Shows What R the Enhancements Available For That Program Or Transaction
    User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
    The naming standard of function modules for functionmodule exits is:
    EXIT_<program name><3 digit suffix>
    The call to a functionmodule exit is implemented as:
    CALL CUSTOMER.-FUNCTION <3 digit suffix>
    To find a Exit.
    Goto Transaction -- Find The Package
    SMOD >f4>Use the Package here to Find the Exits In the Package.
    Else if you Want to search by Application Area wise ,
    There is one more tab to find the Exits in the Respective Application Area.
    Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
    Now Run ur Transaction to Check if it Triggers.
    Thats it..
    Suppose you need to find out all the user exits related to a tcode.
    1. Execute the Tcode.
    2. Open the SAP program.
    3. Get the Development Class.
    4. Execute Tcode SE84.
    5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
    6. Enter the Development class and execute.
    Check out this thread..
    The specified item was not found.
    1. Type the transaction : system->status-> <PROG. NAME>
    2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
    3. Open CMOD utilities->SAP enhancements
    EDIT->All selections
    4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
    5. The displayed list contains the enhancements names for the transaction You were looking for.
    6. Create a project in CMOD and the code in default include->activate.
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    which gives the list of exits for a tcode
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.planetsap.com/userexit_main_page.htm
    User-Exits
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/ab038.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.sap-basis-abap.com/sapab013.htm
    http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
    These links will help you to learn more on user exits.
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.allsaplinks.com/user_exit.html
    www.sap-img.com/abap/what-is-user-exits.htm
    Also please check these threads for more details about user exits.
    Re: Screen exit
    user exit and customer exit
    user exit
    1. Document on UserExits in FI/CO
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    2. Finding User Exits...
    http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
    3. List of all User Exits...
    http://www.planetsap.com/userexit_main_page.htm
    Reward Points if found helpfull..
    Cheers,
    Chandra Sekhar.

  • Cannot select ldap user profile for SGD Global Admin

    Hi all,
    I'm trying to select some ldap users to be in the SGD Global Administrators role, but I am unable to check the check box next to the user profile once I navigate to the account. There is no check box to check.
    I am actively using LDAP for regular user auth and application assignment, so I know my LDAP "works" in that sense, I just can't use it to assign global admins.
    Any thoughts?
    Adam

    The only way to do this is to create a user profile for the (would-be) admin account. And since they're an LDAP user, you'll have to use LDAP mirroring to do this. For example, let's say the user you want is "cn=Joe Admin, ou=Users, dc=example, dc=com"
    Go to "User Profiles", and browse to/open:
    dc=com
    cd=example
    create the directory object "ou=Users"
    Inside of "ou=Users", create the user profile object "cn=Joe Admin"
    Add this user object to the Global Administrators role.
    http://docs.sun.com/source/820-4907/chapter3.html#d0e13589

  • How to fix Workflow failed to get user profile for user:

    hi All,
    How to fix Workflow failed to get user profile for user when using Lookup function in sharepoint designer?

    Try to use “As string” instead of “Login Name” for the “Return field as”.
    Regards,
    Jayant
    jayant prabhakar

  • Using Imagemaps for different Hardware

    How can I using Imagemaps for different Hardware (working on Smartphone , Tablets and PC)

    It has nothing to do with Portals- it's a seperation of web contents. I heard that it's possible with Struts. I just want to know which subset w/o implementing the whole struts framework!

  • Default user profile and different Macs

    I made a 10.6.5 image with a custom user profile. This works perfect. The only annoying is that when I install the image on a other mac certain things are turned on. For example: in the image the time machine icon/blutooth icon in the menubar are removed and turned off. Software update is turned off. If you installed the image on an other mac(different Apple hardware?) these things are on (Apple software update is on) Time machine and blutooth are visable in the menubar.(but not active)
    anyone an idea?
    thanks

    Given that Mac OS has standard settings for users on a standard OS X build, it is surely possible. I remember I was looking into this awhile back, I lost the resource though. Since I will be doing this soon myself I will report back.
    I know the standard profile is here: /System/Library/User Template/English.lproj/
    Presumably you would create a testuser profile, set it up the way you want it. Copy the testuser profile to /System/Library. Rename the User Template folder to User Template.old, then rename the testuser user profile to User Template.
    Permissions look to be:
    System - Read & Write
    Everyone - No Access
    So you would have to apply these to the new User Template folder.
    That is throughout the directory as well. There is another folder inside the User Template folder called, user.template. It looks to be the same. I am not sure of the distinction.
    Hope that helps a bit. Just play around a bit. Just be sure to keep the originals around, hence the .old. The instructions I gave are what we use for setting up an XP standard image, I can't imagine it being much different. Like I said, I will be doing this soon myself. So I will report back.
    This would effectively give the users the same profile upon login. Depending on what you are using to manage network users you could restrict the user from changing any settings or only certain ones. I know you can do this with Workgroup Manager in OS X Server.
    Message was edited by: Kevin Rivers
    Message was edited by: Kevin Rivers

  • Sharepoint 2013 ADFS Integration duplicates User Profiles for each Authentication Type

    Hello everyone
    i am building up a sharepoint farm which is hosting some of our corporate web sites. before integration Adfs and using SAML-Based Authentication every user had a single User Profile and were happy.
    when i integrated adfs 3.0 and sharepoint 2013 SP1 i found whoun a user logs into sharepoint by using trusted identity token issuer (adfs 3.0) they get redirected to a new profile which is totally different from their old Profile. what is the problem ?

    The problem is that SharePoint does not support Multilogon accounts. I asked for that here -
    http://sharepoint.uservoice.com/forums/282887-customer-feedback-for-sharepoint-server/suggestions/7085002-multilogon-accounts
    If you're just moving to ADFS only, then you can migrate users with Convert-SPWebApplication -
    https://technet.microsoft.com/en-us/library/jj219696(v=office.15).aspx or with a script provided here:
    http://blogs.msdn.com/b/sambetts/archive/2014/09/03/how-to-migrate-sharepoint-users-to-adfs.aspx (uses Move-SPUser).

  • OIM 11g Modify User Profile for Updating End Date

    Hi Gurus!
    We have an OIM implementation where users may request the creation of other users by means of a Create User request template. In this template we set the End Date to be 3 months after the request date.
    In order for the requester to extend the period of a user's OIM user account (along with its provisioned resources) we customized a Modify User Profile by displaying the End Date field and automatically populate it again to 3 months after the request date. Also we developed a custom event handler to enable the user when it is disabled and the End Date is updated to a future date.
    This Modify User Profile is working great when the user is still enabled (the End Date is still in the future), however, when the End Date has passed (and the user is Disabled) the requester is not able to see the user when selecting the Modify User Profile request template.
    Is there a way to allow requesters to also see disabled users in the Modify User Profile request template?
    Thank you in advance.
    Regards,

    Hi Kevin,
    thanks for your reply!
    But, in this case, when the user is already disabled due to his End Date, how can a requester, through the Self Service TAB, enable it?
    The Enable User request template does not work since when trying to enable the user, OIM sees the End Date is already passed and the DataSet validation throws an exception.
    The only way I saw was providing a Modify User Profile Request template to change the End Date and developing a custom event handler to enable the user upon the extension of the End Date...
    How can, in this situation, a requester enable the user and extend its End Date?
    Thank you!
    Regards,

  • User exit for different Material Document for different company code

    Hi,
    We want to have different no. range for Material document (GR) for different compnay code. Presently we have no. range at client level. Can we do with any userexit. If so pls. give the details.
    Regards
    Sai Krishna

    [user exit for generating external serial;
    [BADI MB_DOCUMENT_BADI;
    [user exit or any other enhancements during good receipt;

  • Establish setting 'profiles' for different usage scenarios?

    I'm wanting to easily switch between different settings presets (for example, when I connect my laptop to my TV via HDMI, I'd like to have the energy settings set to "never go to sleep". -- Currently I'm having to manually adjust these settings back and forth each time I want to change them).
    I'm looking for a way to establish profiles like this for different usage scenarios -- something that allows a quick menu selection or key combo to toggle the presets.
    Anyone have any ideas?

    Thanks for the link. It looks like that app would do what I wanted.. However it may not be properly functional with 10.6, as it doesn't actually manage to change any settings (though it thinks it has) when switching locations.
    I've emailed the support at Centrix, makers of NetworkLocation (paid application, looks like it's still actively developed) to see if it would allow me to change energy saver settings.
    http://centrix.ca/NetworkLocation/

  • Default Domain profiles for different OUs / departments - GPO ?

    Hi,
    i know there is only one default domain user profile possible.
    We are using Windows 2012 R2 and Windows 7/ 8.1 Clients.
    We would like to delegate a few OUs.
    How is the best way to handle delegation and different profiles ?
    Should we create only one default domain user profile without any sofware installed ?
    Next we save this profile in Netlogon ?
    And each department / different OU admin deploy his software ?
    Is it possible to control where will be use the default user profile ?
    Maybe by security filtering ?
    Is this the right way ?
    Thank you very much & best regards
    Andi

    Hi Andi,
    Based on your description, did you mean that want to set default domain user profile? From Darrell Gorter’s
    description in
    this thread, this option seems to be unsupported and known it have issues.
    Meanwhile, please refer to following article and check if can help you.
    A Better Way to Customize the Windows
    Default Profile
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    If anything I misunderstand or any update, please don’t hesitate to let us know.
    Hope this helps.
    Best regards,
    Justin Gu

  • User profiles for analyzer and query designer

    Hello,
    I have one short question about user-profiles.
    Which user-profile should I best use for a user, who should just use the BEx Analyzer and which profile does a user need for using BEx Analyzer + BEx Query Designer.
    Thanks

    I just need the SAP-Roles which allows a user to use Analyzer and Query Designer.

Maybe you are looking for