User roles were deleted for the mass change in CUA system.

Dear Team,
I have assigned a role to a set of users in CUA via SU10 to a specific child system, as like I have executed the task 3 to 4 times for the assignment of the different roles to a set of users and some users may repeated in each execution .
And when I check in child system after few hours the old roles were deleted and contains the role which I have assigned in the mass change.
It was happened only to few users not more than 20 users, then I expected that may be the users who get repeated in SU10 more than one time for the different role assignment it get impacted.
But that is not a problem, because I verified some of the users who repeated more than one time in child system and they didnu2019t get deleted the old roles and it was appended with the new role to the existing rights of the user.
Still some of the IDOC were showing in SCUL transaction with Yellow signal triangle shape
So please help me out what would be the issue.
Kindly let me know if need more information....
SV

Hi,
It is a problem related to IDOC issue. Please contact Basis Team regarding pushing of the Idocs. I am giving an over view of the steps that needs to be executed for idoc push. Please contact Basis with the same.
Run RBDAGAIN report (se38)
Give Idocs and save as variant.
Now go to sm36 specify a job name and start.
This will change the Idoc status from 02 to 30. For 03 to 30 it needs a different report. Please check and let me know if any issue. As long as idocs are not pushed properly it will give an error. At times also check the CUA user is ok or not. It gets locked at times. To know which one is the CUA user->Login to child system->su01->See the change executed by the user->Get the user name.
Let me know if any issue.
Regards
Aveek.

Similar Messages

Set of Roles were deleted across the landscape.

Hi,
The set of roles were removed or deleted acorss the landscape long back and again i see the same roles in Quality system only not in any other systems.
As i verified the change documnet of the role and system is hitting the message as "No change documnet found".
Kindly provide me the solution as how it will re-buold only in quality system not in any other ssytems?
SV

>
Sukumar Vempati wrote:
> Hi,
>
> The set of roles were removed or deleted acorss the landscape long back and again i see the same roles in Quality system only not in any other systems.
> As i verified the change documnet of the role and system is hitting the message as "No change documnet found".
> Kindly provide me the solution as how it will re-buold only in quality system not in any other ssytems?
>
> SV
Your Quality system must have been refreshed from the system where the role already existed.
If the roles were removed from Dev -> Qual -> Prod landscape and you are now getting it in Quality again, the possible reason could be your Basis team copying it from someplace where the roles where not deleted. And it is not showing in change document because the change was not done in that system from where it was copied.
Check with the your Basis team if something was done in your quality system recently.

What are the config steps for contract mass change and quota arrangement?

Hi friends
what are the config steps for contract mass change and quota arrangement?
Regards
Raj Kumar

Process Flow
The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
       1.      Search for contracts
You search for and select the contracts or the contract hierarchy that you want to change.
Contracts that have the status Closed cannot be changed.
       2.      Define mass changes
You specify the changes you want to make.
You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
       3.      Simulate mass changes
Here you can perform a trial run of your mass changes. This simulation step is optional.
We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
Background processing
The system processes the changes in the background.
If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
       4.      Carry out mass changes
Here you apply the changes to the contracts.
You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

Just got a new MacMini. Migrated files using Time Machine. However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one. How do I get rid of these updates? They won't delete!

Just got a new MacMini. Migrated files using Time Machine. However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one. How do I get rid of these updates? They won't delete!

Only thing I can think of is trying this Lion trick...
http://www.cultofmac.com/106030/how-to-nuke-lions-launchpad-and-start-over/10603 0/

HOW MANY ROLES ARE ELGIBLE FOR THE USER

hello gurus,
how many roles can we assign to the user... what is the maximum limit of the roles and profiles for the user.
thanks in advance!
sri

Dear Srinivas,
About roles it's indeed not to easy to tell..just imagine the scenario:
1. Maximum number of profile is 312 ... (however due to some known bug system reads about 300). So, let's say 300 profile maximum can be assigned to an user
2. Now you can have single ABAP role which generally one-to-one to profile. So, this theory says if you are only assigning single ABAP roles, you can assign maximum 312 (or 300) roles.
3. But, you might also have Composite ABAP role. A composite ABAP role can have one or more Single/Composite ABAP role. So, one Composite ABAP role can correspond to any number of Profile which is determined by number of individual Single roles under than composite role. So, when you are assiging Composite ABAP role, you have to take care underlying number of profiles and make sure total does not exceed 312 (or 300 without note correction)
4. Now, last part of complication (and my favourite one). Sometimes, there is an empty Role which does not have any ABAP authorization assigned to it. But, this type of roles are used to map a authorization role in JAVA system. These roles does not have any Profile (as it does not have any ABAP authorization). Now, that brings my confusion ..What happens you assign 300 ABAP profiles via ABAP Roles and another 20 empty role for JAVA system without profile. You see my point
Hope this clarifies a bit
Cheers !!
Satya.

Hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now looping on 4 items to delete for the past 2 weeks. Can't reboot, reload, or restart. I have to let the battery run down for it to turn off. How to fix this, please?

I had hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now it is looping on 4 items to delete for the past 2 weeks. I can't reboot, reload, or restart. I have to let the battery run down for it to turn off. I think a big part of the problem is that someon one the internet (the hacker) was mirroring my hard drive. It seems to have locked up my system. I could be wrong about this guess, though. All I do know is that it is now looping on the last 4 iems, and I can't do anything.
Well, I can get it to turn on, but all it does is continously try to delete the last 4 items. When I try to reload Snow Leopard, it tells me my hard drive is full and that I need to delete items.
Can anyone help? I am so lost without my Mac. I am back on the PC, and though it works, I'm sure many of you will understand when I say it's just not a Mac.
Thanks.

I installed Snow Leopard using my Apple external Superdrive. I followed directions I found on the Apple site. Here is the article info: Mac OS X v10.6 Snow Leopard: How to Erase and Install
                 Article HT3910
                 located at: http://support.apple.com/kb/HT3910
Everything was going smoothly until I got to the reinstall part. I had to choose to reinstall on a hard drive or network drive. I've never used a network drive; just the hard drive. It seems that's where the troubles began. I selected the hard drive. It seemed to go well, and then I got the message that I needed to delete some files because I was out of space. I chose to get rid of my music files, but, there were only 636. I don't know what the rest of the files were. I was using the Secure Empty Trash command.
That was my first time doing an erase and install. I tried to do it again, but I now get a continuous error telling me that my hard drive is full and I must delete files. Only I can't delete files because 4 files are still being deleted and my computer won't let me stop the process.
I found out about the hackers mostly by the fact that whenever I used to watch something like Hulu or Netflix, I never had problems with internet connection or speed. Lately, I had internet connection problems. I went in to check my settings for my internet provider and found out the settings had been changed to public and all these extra computers were connected to my network.

Choosing proper CoDecs for the masses?

Here is a website that serves up QT movies of a specific person's commercial film work: http://www.sprocketfuel.com/2007/reel.html
For some reason, the Fast Start QT movies created for this site are not working very smoothly... it almost seems that the computer will play the beginning of the QT movie, and then catch up to the download, and re-set, only to begin playing from the beginning again.
These movies are only :30-:60 seconds in length, and only 4Meg to 8Meg in size... it doesn't seem like they should be so troubled!
They were exported as Fast Start movies from QT Pro 6, using Sorensen 3, High (not Best) Quality and 22K stereo audio.
In the past, we have had pretty good luck with that, but now they seem to be acting quirky.
Should I choose a different codec? Make them even smaller? What is a good rule of thumb to make them play smoothly for the masses?
PC Windows XP Pro Fast. Very Fast.
PC Windows XP Pro Fast. Very Fast.

Hmmm...
I don't know if I just answered my own question, but I went ahead and did the JavaScript updates for the Windows IE fix... and it seems to have improved things dramatically. Who'da thunk it? I only use FireFox, so I didn't think that would affect my experience, nor could I understand why the JS fix would help either... but something triggered and it works a lot better for me now.
Any webmeisters that haven't yet changed their OBJECT and EMBED coding, I highly advise that you do! Very weird, but it seems to work well.
I was sure my problems were from odd codecs, slow servers, or funky computers... but it seems to have been a Microsoft "update" that killed the established way of doing things.
Fargin' Microsoft!
PC Windows XP Pro Fast. Very Fast.

'Some images are missing because they were deleted from the document'

Hi,
I created a document in Pages v5.2 last week and have just opened it and received the following message:
'Some images are missing because they were deleted from the document'
When I try and replace the missing images I get the following message:
'The image "filename" couldn't be inserted.'
When I try and reimport the original image I get the following message:
'The image "filename" couldn't be inserted. This image is of an unsupported type.'
If I try and insert an image that was not in the document before, in the same file format, it goes in fine.
If I insert the original image into a blank Pages document it goes in no problem.
I would also like to point out that the data folder still contains lots of versions of images in the document, but does not seem to have any of the ones I am actually using, which I guess is where the problem is. However I have no idea how or why these specific images have been deleted.
Any light on how this problem has come about, and the best possible way to fix it would be greatly appreciated.
Alex

I have Pages v5.2.2 on OS X 10.9.4. I can not reproduce your stated issues with images in this version of Pages. I don't have a solution for you. See my test in the third paragraph. If I were experiencing this behavior, I would perform a Safe Boot to clear out System caches, and try again, before kicking Pages v5+ to the curb.
The Safe Boot would be pressing and holding the shift key at boot chime, and until a horizontal progress bar shows on the screen. At the eventual login screen, after you type your password — press and hold the shift key — press the right arrow to login, and release the shift key after the Finder menu bar appears. Then reboot normally.
I have created a new document. Dragged and dropped an image into it and saved. Exited Pages. Reopening worked fine. Deleted the image, and proceeded through the following steps, punctuated by save, exit, reopen, and deliberate image removal. Different .jpg image each time. About mid-way through the following item list, I rebooted the MBA just to throw some "spin" into the process. I did not perform a Safe Boot prior to this series of tests.
Toolbar > Media insert
Insert > Choose jpg into document
Text Box image fill
Shape image fill

Fix for the Identity change with Siri

After trying all different ways to sync my phone and my wife's Iphone through the cloud sharing contacts and calenders, I think I have the fix for the identity change that Siri does. I turned off the contact sync on iCloud and it stopped swapping identities. I think that sharing contacts makes the iCloud think there is only one user. Downside of the cloud but not worth the hassle factor. I will sync contacts through iTunes.

gmiller0 wrote:
My mac has 10.7.3 and will not connect to wifi after it wakes up. Have contacted AppleCare but the problem cannot seem to be resolved.. I guess this is a major issue with Lion:(
What model of Mac? I have a MBP running 10.7.3 and do not have that issue. From the other couple of posts I've seen about it, it seems to be maybe an issue with some iMacs? Have your tried searching the Lion or iMac forums for similar issues, just to see if anyone has hit on why it is happening?

The mass change of scheduling agreement

Dear all,
currently, i want to make the mass change to reject all the scheduling agreement in SD.
However, i could not found the schecduling agreemts in MASS and i also could not found the relevant date in the table masshead.
anybody would like to give me some suggestion?
regards!
Daniel

Hi,
Thanks for your reply!
i know what you mean. i also use the same way as you said to handle it .
but the problem is i could not get the scheduling date after inputing the slection screen.
I had tired to found the data in the table MASSHEAD and MASSVBAP, and it is missing.
my system's version is ECC 6.0. i suspect that is the reason.
whether it have the other tocde or the other object except the BUS2032 in which can make the mass change of scheulding argreement?
Thanks in advance
Daniel

User Exits or BAdis' for the Service Order create Transaction

Hi all,
 I need to Replace a field, "Product" in the "Item Details" area of the create Service Order Transaction(CRMD_BUS2000116) with some custom field.
Are there any Exits/BAdi which will help me in doing this..
Thanks in advance
Sethu

Hi Sethu,
The user exits / BADI's for the Transaction(CRMD_BUS2000116 are not avaliable:
The following info from one forum to search user exits / BADI's that you can use: There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.
Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
Also have a look at below report which will list BADIs.
REPORT Z_FIND_USER_EXITS.
TABLES : TSTC,TADIR,MODSAPT,MODACT,TRDIR,TFDIR,ENLFDIR,SXS_ATTRT ,TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
 P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
 SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
 TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
 SELECT SINGLE * FROM TADIR
 WHERE PGMID = 'R3TR'
 AND OBJECT = 'PROG'
 AND OBJ_NAME = TSTC-PGMNA.
 MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
 IF SY-SUBRC NE 0.
 SELECT SINGLE * FROM TRDIR
 WHERE NAME = TSTC-PGMNA.
 IF TRDIR-SUBC EQ 'F'.
 SELECT SINGLE * FROM TFDIR
 WHERE PNAME = TSTC-PGMNA.
 SELECT SINGLE * FROM ENLFDIR
 WHERE FUNCNAME = TFDIR-FUNCNAME.
 SELECT SINGLE * FROM TADIR
 WHERE PGMID = 'R3TR'
 AND OBJECT = 'FUGR'
 AND OBJ_NAME EQ ENLFDIR-AREA.
 MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
 ENDIF.
 ENDIF.
 SELECT * FROM TADIR INTO TABLE JTAB
 WHERE PGMID = 'R3TR'
 AND OBJECT in ('SMOD', 'SXSD')
 AND DEVCLASS = V_DEVCLASS.
 SELECT SINGLE * FROM TSTCT
 WHERE SPRSL EQ SY-LANGU
 AND TCODE EQ P_TCODE.
 FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
 WRITE:/(19) 'Transaction Code - ',
 20(20) P_TCODE,
 45(50) TSTCT-TTEXT.
 SKIP.
 IF NOT JTAB[] IS INITIAL.
 WRITE:/(105) SY-ULINE.
 FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
 sort jtab by OBJECT.
 data : wf_txt(60) type c,
 wf_smod type i ,
 wf_badi type i ,
 wf_object2(30) type C.
 clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
 LOOP AT JTAB into wa_tadir.
 at first.
 FORMAT COLOR COL_HEADING INTENSIFIED ON.
 WRITE:/1 SY-VLINE,
 2 'Enhancement/ Business Add-in',
 41 SY-VLINE ,
 42 'Description',
 105 SY-VLINE.
 WRITE:/(105) SY-ULINE.
 endat.
 clear wf_txt.
 at new object.
 if wa_tadir-object = 'SMOD'.
 wf_object2 = 'Enhancement' .
 elseif wa_tadir-object = 'SXSD'.
 wf_object2 = ' Business Add-in'.
 endif.
 FORMAT COLOR COL_GROUP INTENSIFIED ON.
 WRITE:/1 SY-VLINE,
 2 wf_object2,
 105 SY-VLINE.
 endat.
 case wa_tadir-object.
 when 'SMOD'.
 wf_smod = wf_smod + 1.
 SELECT SINGLE MODTEXT into wf_txt
 FROM MODSAPT
 WHERE SPRSL = SY-LANGU
 AND NAME = wa_tadir-OBJ_NAME.
 FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
 when 'SXSD'.
For BADis
 wf_badi = wf_badi + 1 .
 select single TEXT into wf_txt
 from SXS_ATTRT
 where sprsl = sy-langu
 and EXIT_NAME = wa_tadir-OBJ_NAME.
 FORMAT COLOR COL_NORMAL INTENSIFIED ON.
 endcase.
 WRITE:/1 SY-VLINE,
 2 wa_tadir-OBJ_NAME hotspot on,
 41 SY-VLINE ,
 42 wf_txt,
 105 SY-VLINE.
 AT END OF object.
 write : /(105) sy-ULINE.
 ENDAT.
 ENDLOOP.
 WRITE:/(105) SY-ULINE.
 SKIP.
 FORMAT COLOR COL_TOTAL INTENSIFIED ON.
 WRITE:/ 'No.of Exits:' , wf_smod.
 WRITE:/ 'No.of BADis:' , wf_badi.
 ELSE.
 FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
 WRITE:/(105) 'No userexits or BADis exist'.
 ENDIF.
ELSE.
 FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
 WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
 when 'SMOD'.
 SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
 CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
 when 'SXSD'.
 SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
 CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Hope it will help you.
Regards,
Arjun
Reward points if it helps

[2008R2] Prevent event : The shadow copies of volume D: were deleted because the shadow copy storage could not grow in time

During the restore of data using VSS Snapshots it deleted all the snapshots, this event was written in the system log :
The shadow copies of volume D: were deleted because the shadow copy storage could not grow in time. Consider reducing the IO load on the system or choose a shadow copy storage volume that is not being shadow copied.
It only restored 20 GB of data and there should be plenty of space in the Shadow copy storage
Used Shadow Copy Storage space: 2.692 GB (0%)
Allocated Shadow Copy Storage space: 5.397 GB (0%)
Maximum Shadow Copy Storage space: 694.752 GB (18%)
When there isn't enough space it should start to delete the oldest snapshots to free up additional space, but it deleted
all the snapshots. The problem is the IO but how to prevent this from happening again?

Hi,
Since the shadow copy storage space doesn’t run out, the issue could be due to the Volsnap.sys driver has encountered excessive I/O activity.
You could refet to the article below to resolve the issue. This article is for Windows 2003 but it will also help on Windows 2008 R2 system.
Error message when a Windows Server 2003-based computer has a high level of I/O activity: "The shadow copies of volume Volume_Name were aborted because the diff area file could not grow in time"
http://support.microsoft.com/kb/925799
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Re: camera connection kit- I uploaded pictures using the sandisk connection, clicked on 10 pics to delete and ALL of my files were deleted from the sandisk! Is there any way to recover these pics?

Re: camera connection kit- I uploaded pictures using the sandisk connection, clicked on 10 pics to delete and ALL of my files were deleted from the sandisk! Is there any way to recover these pics?

Kevin-
You say you uploaded the pictures to the iPad? Then they should still be there, and you can copy them to your computer through iTunes.
There are utility programs for a computer that can recover deleted files from hard drives, and they may work for camera memory cards as well. I've used DiskWarrior for Macintosh to recover pictures from an SD card before.
Fred

HT4009 My in app purchase keep being denied. Why? They were working for the past, uh, 2 years. Now they don't.

My in app purchase keep being denied. Why? They were working for the past, uh, 2 years. Now they don't. I can't fix it on my own apparently because I'm sent to a rather unhelpful support site.

If you mean that you are getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

Shared Services Console - User is not authorized for the action

Hi,
I have installed Essbase 11.11.3 and configured on Linux. I started EPM and then the Shared Services Console. I created a new group Poweruser and assigned a new user to it. I provisioned the group withall the rights of the admin. This all works.
When I log on with the new user on the Shared Service Console and go to Essbase Studio Server and click on the Essbase Studio Server application it gives me the message:
User is not authorized for the action
This is the same message as I get under the user admin. Can anyone tell me what I can possibly do to make it work.
The service for EAS is started properly. The one thing that is not configured is HBR.
Patrick

Hi,
What are you trying to achieve, provision a user for essbase studio ?
EAS is a separate product from Studio.
Cheers
John
http://john-goodwin.blogspot.com/

User roles were deleted for the mass change in CUA system.

Similar Messages

Maybe you are looking for