User's association broken - Unity

I have this error in CUCM BE Unity
"This user's association to the co-resident Cisco Unified Communications Manager user has been broken."
I Click Here to reassociate the orphaned user... but no user names appear.
Can some help me?
Thanks
Matt

Hi Matt -
Here is a link to the BE manual in case you don't have it - https://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/7_0_1/ccmcfg/b08user.html#wp1059267
You did not mention in your post if you had CUCM integrated with LDAP - the guide discusses the differences in how users are created and synchronized, including this caveat "
You must configure User ID and Directory Extension for the user in Cisco Unified Communications Manager before you can configure the end user in Cisco Unity Connection. You cannot create a Cisco Unity Connection user without a corresponding Cisco Unified Communications Manager user. You cannot delete an end user in Cisco Unity Connection Administration, unless you have enabled LDAP synchronization and the Cisco DirSync service deletes the user in Cisco Unified Communications Manager Administration after you delete the user in the LDAP directory. If the Cisco DirSync service deletes the user for Cisco Unified Communications Manager, you must manually delete the user in Cisco Unity Connection, as described in the User Moves, Adds, and Changes Guide for Cisco Unity Connection. If you do not delete the user in Cisco Unity Connection Administration, Cisco Unity Connection classifies the user as orphaned." Have you tried recreating the user in CUCM and then reassociating in Unity?
Ginger

Similar Messages

Help! Cant log in to BB App World -changed email and now asking for original user name associated email

Hi
I have a bold 9790. I have changed my BB app world email as I cant access that original email anymore, so changed email address, i registered it online in the bb website, when i go to update apps i try and log in to the appworld with my new email it says 'enter user name associated with this smartphone', and just canot log in...PLEASE HELP

elc088 wrote:
Hi
I have a bold 9790. I have changed my BB app world email as I cant access that original email anymore, so changed email address, i registered it online in the bb website, when i go to update apps i try and log in to the appworld with my new email it says 'enter user name associated with this smartphone', and just canot log in...PLEASE HELP
Hi @elc088! Welcome to the BlackBerry Support Community Forums!
If you're referring to BlackBerry ID, then you need to perform a Security Wipe before you can login using your new credentials. Make sure you have a backup because this will delete all of your data.
Cheers!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

How to identify which role user is associated with?

Oracle 11.0.1.7:
How do I identify which role a user is associated with?
Also how do I identify the privilges for a given role. For eg if SELECT, INSERT, DELETE was granted for a table to a role which dictionary table do I look at?
I looked at USER_TAB_PRIVS.

Check this:
http://www.adp-gmbh.ch/ora/misc/recursively_list_privilege.html
HTH
-Anantha

Finding all groups a user is associated to

Hi,
I have a situation where in I would like to know ALL the groups a user is associated to. Is there any standard API to do this?
Thanks,
Jatinder

I just meant you can write a little procedure that would use the connect by command to build a user rights path per say. This has been very helpful to me because we have thousands of groups so I can see how the group rights filter down.
You just need a couple of cursors...
1)select all the groups from member$ that a user is a direct member of
2)then do a connect by prior group_id = member_group_id start with member_group_id = (the groups returned in the first cursor).

How to get all AD User accounts, associated with any application/MSA/Batch Job running in a Local or Remote machine using Script (PowerShell)

Dear Scripting Guys,
I am working in an AD migration project (Migration from old legacy AD domains to single AD domain) and in the transition phase. Our infrastructure contains lots
of Users, Servers and Workstations. Authentication is being done through AD only. Many UNIX and LINUX based box are being authenticated through AD bridge to AD.
We have lot of applications in our environment. Many applications are configured to use Managed Service Accounts. Many Workstations and servers are running batch
jobs with AD user credentials. Many applications are using AD user accounts to carry out their processes.
We need to find out all those AD Users, which are configured as MSA, Which are configured for batch jobs and which are being used for different applications on
our network (Need to find out for every machine on network).
These identified AD Users will be migrated to the new Domain with top priority. I get stuck with this requirement and your support will be deeply appreciated.
I hope a well designed PS script can achieve this.
Thanks in advance...
Thanks & Regards Bedanta S Mishra

Hey Satyajit,
Thank you for your valuable reply. It is really a great notion to enable account logon audit and collect those events for the analysis. But you know it is also a tedious job when thousand of Users come in to picture. You can imagine how complex it will be
for this analysis, where more than 200000 users getting logged in through AD. It is the fact that when a batch / MS or an application uses a Domain Users credential with successful process, automatically a successful logon event will be triggered in associated
DC. But there are also too many users which are not part of these accounts like MSA/Batch jobs or not linked to any application. In that case we have to get through unwanted events.
Recently jrv, provided me a beautiful script to find out all MSA from a machine or from a list of machines in an AD environment. (Covers MSA part.)
$Report= 'Audit_Report.html'
$Computers= Get-ADComputer -Filter 'Enabled -eq $True' | Select -Expand Name
$head=@'
<title>Non-Standard Service Accounts</title>
<style>
BODY{background-color :#FFFFF}
TABLE{Border-width:thin;border-style: solid;border-color:Black;border-collapse: collapse;}
TH{border-width: 1px;padding: 2px;border-style: solid;border-color: black;background-color: ThreeDShadow}
TD{border-width: 1px;padding: 2px;border-style: solid;border-color: black;background-color: Transparent}
</style>
$sections=@()
foreach($computer in $Computers){
$sections+=Get-WmiObject -ComputerName $Computer -class Win32_Service -ErrorAction SilentlyContinue |
Select-Object -Property StartName,Name,DisplayName |
ConvertTo-Html -PreContent "<H2>Non-Standard Service Accounts on '$Computer'</H2>" -Fragment
$body=$sections | out-string
ConvertTo-Html -Body $body -Head $head | Out-File $report
Invoke-Item $report
A script can be designed to get all scheduled back ground batch jobs in a machine, from which the author / the Owner of that scheduled job can be extracted. like below one...
Function Get-ScheduledTasks
Param
[Alias("Computer","ComputerName")]
[Parameter(Position=1,ValuefromPipeline=$true,ValuefromPipelineByPropertyName=$true)]
[string[]]$Name = $env:COMPUTERNAME
[switch]$RootOnly = $false
Begin
$tasks = @()
$schedule = New-Object -ComObject "Schedule.Service"
Process
Function Get-Tasks
Param($path)
$out = @()
$schedule.GetFolder($path).GetTasks(0) | % {
$xml = [xml]$_.xml
$out += New-Object psobject -Property @{
"ComputerName" = $Computer
"Name" = $_.Name
"Path" = $_.Path
"LastRunTime" = $_.LastRunTime
"NextRunTime" = $_.NextRunTime
"Actions" = ($xml.Task.Actions.Exec | % { "$($_.Command) $($_.Arguments)" }) -join "`n"
"Triggers" = $(If($xml.task.triggers){ForEach($task in ($xml.task.triggers | gm | Where{$_.membertype -eq "Property"})){$xml.task.triggers.$($task.name)}})
"Enabled" = $xml.task.settings.enabled
"Author" = $xml.task.principals.Principal.UserID
"Description" = $xml.task.registrationInfo.Description
"LastTaskResult" = $_.LastTaskResult
"RunAs" = $xml.task.principals.principal.userid
If(!$RootOnly)
$schedule.GetFolder($path).GetFolders(0) | % {
$out += get-Tasks($_.Path)
$out
ForEach($Computer in $Name)
If(Test-Connection $computer -count 1 -quiet)
$schedule.connect($Computer)
$tasks += Get-Tasks "\"
Else
Write-Error "Cannot connect to $Computer. Please check it's network connectivity."
Break
$tasks
End
[System.Runtime.Interopservices.Marshal]::ReleaseComObject($schedule) | Out-Null
Remove-Variable schedule
Get-ScheduledTasks -RootOnly | Format-Table -Wrap -Autosize -Property RunAs,ComputerName,Actions
So I think, can a PS script be designed to get the report of all running applications which use domain accounts for their authentication to carry out their process. So from that result we can filter out the AD accounts being used for those
applications. After that these three individual modules can be compacted in to a single script to provide the desired output as per the requirement in a single report.
Thanks & Regards Bedanta S Mishra

List View Web Part anonymous users paging is broken

Hi I checked that list view web part do not work for anonymous users with paging. wanted to check if its known bug or there is some intention to keep it like that.
Rohit Pasrija

Hi,
According to your description, there is an issue that if the paging is configured for a list view web part, it will be broken for anonymous users.
I tried to reproduce this issue with the steps below, however, all work without issue.
1. Enable anonymous access in Web Application level;
2. Enable anonymous access in site collection level;
3. By default, the permission settings of a list inherit the permissions from its parents, that’s say, anonymous access also enabled in the current list, “Anonymous
Users” can “View Items”;
4. Set paging for the “AllItems” view, add this list as a web part into a page, the paging works as expected for anonymous users.
I suggest you create a new Web Application and configure to enable anonymous access following the steps above to see if the issue still exists.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

Deployment Alternate Association broken

I'm using TestStand v3.5, and we've set the Alternate Association for .seq files to be our Test Executive. The problem we are running into is that the update to the association in the Folder Options File Types for .seq files does not map the location of our Test Executive properly. The path is missing the root drive letter and ends up as "Test\Bin\TestExec.exe" "%1" instead of "C:\Test\Bin\TestExec.exe" "%1".
Also we'd like to be able to add the -useExisting flag to the file association - i.e.; "C:\Test\Bin\TestExec.exe -useExisting " "%1".
Does anyone know what might be causing the drive letter to be omitted from the path to the executable?
Other settings that may be a factor are: we install to the Windows Volume (C:\) drive with no Default Installation subdirectory, since we install files in two different locations that branch from the C:\ drive (C:\Test\... and C:\Program Files\...). Enabling/disabling the Do Not Ask User for Installation Directory option has no effect.
Does anyone know of a work-around that would allow us to get the desired file association programatically (script, batch, hack)?
Our current solution is to turn off this feature and manually edit this association after the install, but we'd really like an automated method.
Thanks,
-Jack

FYI,
I kept digging into this to see how we could get around this issue, and it appears that you can send some command line configurations as Custom Commands. Here are the commands that I found that appear to work (YMMV):
cmd /c "ASSOC .seq=NationalInstruments.TestStandSequenceFile.1"
and
cmd /c "FTYPE NationalInstruments.TestStandSequenceFile.1="C:\Test\Bin\TestExec.exe" "-useExisting" "%1" "
Note that the location of quotes appears to be important. If you're installing on top of an existing TestStand installation, I believe you only need the second command, as the association of the .seq suffix has already been set. I also disabled the Alternate Association of .seq files in the Advanced Options.
I've not gotten a chance to release a deployment using this, but have tested it a few times on the development machine. If anyone sees any potential problems with using this work-around, I'd appreciate hearing about it ASAP!
-Jack

Change Default User Creation OU in Unity 7.x

How do I change where users are created by default when they are added through the web system administration on unity 7.x and Exchange 2003? For a failover system do i need to modify it on both servers, or just the primary? I looked through the reconfiguration guide and didn't see anything that specifically covered this..
Thanks,

Re-run the permissions wizard
http://www.ciscounitytools.com/Applications/Unity/PermissionsWizard/Unity50/Help/PWHelp_ENU.htm

Listing of Users with associated Groups

Is there an easy way to generate a listing of APEX users and their associated groups? I know how to get the current user and how to determine what groups they are part of, but am looking for a simple query I can run to generate a complete list of Users and their associated groups.
Thanks

if you want to return the application groups that a user is assigned to, you can use the WWV_FLOW_GROUP_USERS intersection table. For example;
SELECT group_name
FROM wwv_flow_group_users
WHERE user_id = (SELECT user_id
FROM wwv_flow_users
WHERE user_name ='MRITTMAN')
would list out all of the groups that the user 'MRITTMAN' belongs to
So to get all users and their groups, remove the where clause..
(You will need read rights to the view, some dba's deny read rights to these objects in the name of security..)
Thank you,
Tony Miller
Webster, TX

Windows XP PDF File associations broken

After updating to Adobe Reader XI (Windows XP 32 bit), my PDF file associations no longer worked.
When I double clicked on a pdf file, it would open using a different application (Hex Editor Neo) instead.
The file thumbnails in Windows Explorer did not show the usual Adobe PDF icon: The icon for an unknown file type was displayed.
I first tried rebooting - no difference.
When I looked at the file type associations (via Folder Options in Control Panel), PDF files no longer appeared in the list of registered file types.
When I tried to add a new entry manually, it did not appear to get saved in the registry, so it made no difference.
Clicking the 'Advanced' button under the 'File Type' tab did nothing - the usual 'Advanced' dialog box did not appear.
In the end I had to uninstall Adobe Reader XI and re-install from scratch to get theings to work properly.
Is this a known issue?

This is more informative: where in the registry does Windows store, with which program to open certain file types? - Super User. I went to HKCU\software\classes\applications and added a new key acroRD32.exe
Now in the list of file types in the default programs: associate a file type with a program, I find that I can change PDF to adobe reader.
However, I still can not click on a PDF file and have it automatically open in adobe reader. This is however a minor nuisance. More important to me is that I can not see pdf icons in windows explorer. I have numerous pdf pictures and I would like to find them easily in explorer.

J4W 10.5 Login only works for users with associated device

Hi all,
I just discovered that using J4W 10.5 and service autodiscovery, the login only works if the user has an Device associated.
Means that login is not possible if the user has only a controlled device profile.
We are using 10.5.1 Build 43318 - Is this a known Bug, or is this working with a different version?
Regards,
Peter

Which form of Service discovery are you using? Is it _cuplogin or _cisco-uds? Do you use a jabber-config.xml file? What is the directory source selected for Jabber, is it CUCM or AD?
Recently i had worked on a case with the following Scenario and opened a Defect for it : CSCup74253
Conditions:
With the following setup Service discovery fails and user has to manually login in Jabber specifying the IP address of the CUP server Service Discovery method : _cisco-uds or _cuplogin Directory connection type : UDS selected on service profile for the jabber user (no XML used) CUCM and CUP version : 9.1.2 Jabber version:9.7.0 and 9.7.1 End user page in CUCM : under controlled Devices only a Hardphone is selected with owner user id populated on device page of the phone in CUCM.
This BUG is solved for Jabber 10.5.1. But in essence if you do not select ANY of the device be it soft-phone or hard-phone under user> controlled devices for that matter Serivce discovery will fail.
Thanks
Tapan

User & workstation associated AOT

Hi
Just to clarify if I'm correct.
I did some tests with AOT's in our environment.
I'm used ZfD agent 4.0 & 4.0.1 with NWClient 4.83 & above
I create an AOT associated on workstation and one on User (force run & App Launcher enabled)
When I startup the workstation the aot associated to workstation is running perfectly (probably due to the service
"Novell Application Launcher")
Then I log in but the user based AOT doesn't run.
It does when I start NALdesk or NALWIN32
So what I conclude from this is that aot's associated aot's are executed by the service "Novell Application Launcher"
and the ones associated to users don't, they only start via NALdesk NALWIN32 or via InternetExplorer (browser plugin)
Is this conclusion right?
If so why doesnt user associated AOT's run via the service "Novell Application Launcher" and the workstation based do?
Regards
Dave

Extension to my previous question
I want to run an AOT on certain workstations before the user logs into novell or even when the user doesn't log in into
novell (only local)
In my tests I did I can do this with aots associated to workstations.
BUT now I want to access certain files on a novell server via that aot.
how can I do that (I know that I can give file rights to an aot but following the help files this grant rights to
quote:
"files, directories, and volumes when this Application object is associated with a User object or with a Group,
Organizational Unit, Organization, or Country object. Such rights are removed when the Application object is
unassociated."
But this doesn't give rights to workstations.
How can I solve this?
regards
Dave
On Fri, 06 Jan 2006 12:31:42 GMT, Dave <[email protected]> wrote:
>Hi
>
>
>Just to clarify if I'm correct.
>
>I did some tests with AOT's in our environment.
>
>I'm used ZfD agent 4.0 & 4.0.1 with NWClient 4.83 & above
>I create an AOT associated on workstation and one on User (force run & App Launcher enabled)
>
>When I startup the workstation the aot associated to workstation is running perfectly (probably due to the service
>"Novell Application Launcher")
>Then I log in but the user based AOT doesn't run.
>It does when I start NALdesk or NALWIN32
>
>
>So what I conclude from this is that aot's associated aot's are executed by the service "Novell Application Launcher"
>and the ones associated to users don't, they only start via NALdesk NALWIN32 or via InternetExplorer (browser plugin)
>
>Is this conclusion right?
>If so why doesnt user associated AOT's run via the service "Novell Application Launcher" and the workstation based do?
>
>
>
>Regards
>Dave

How do you change your user name associated with the app store on the iphone 3G. When attempting to update, it is using an old email address that has since been changed at the apple site. The problem is that my phone does not seem to recognize this.

I have exausted my ideas, and turn to the forum, prior to paying for something that may be a 2second simple fix. Please help if you can. Let me know if you need more info to understand my dilema.
Thanks.

Apps are permanently tied to the Apple ID used to purchase them. You will always be asked for the password associated with this ID when updating apps, regardless of whether or not you are using this ID for current purchases. The only way to stop this is to delete the old apps from your phone and iTunes and repurchase them with your current ID.
Edit: to change the ID used for future purchases on your phone, go to Settings>Store>Apple ID, tap the ID shown, sign out, sign back in using the new ID. As explained above, you will still be prompted with the old ID when updating apps purchase with the older ID.
Message was edited by: randers4

Per-user minor upgrades broken in Windows Installer after KB2918614

Hi.
We use the msiexec /fvomus procedure as detailed in http://msdn.microsoft.com/en-us/library/aa367575(v=vs.85).aspx for updating our product. We recently started getting feedback from clients that our application wasn't updating properly. After investigating
we've discovered that kb2918614 is to blame.
After this patch doing a msiexec /fvomus results in a UAC prompt which has to be clicked by the user. We do our updates using quiet mode however, and if the /q flag is used the install just fails silently.

> and most
recently KB3008627
Did you distribute the registry value described in the article under "Prerequisites"?
Unexpected UAC prompt after you install update 2918614 in Windows
Rolf Lidvall, Swedish Radio (Ltd)

Pdf file association broken

After a install of acrobat reader X, acrobat prompts with a "open with " dialog each time a pdf document is opened,tried uninstalling and re-installing, tried using the adobe labs uninstall tool, as it seems there may be something left from the previous install, tried installing previous version and uninstalling, tried manually setting file association.
pdf attachments in outlook wont open at all no prompts at all..have to be saved then they will open after the "open with" prompt
office 2010, windows xp....any suggestions??

Reinstalling Adobe Reader should normally fix the file association; I don't know why it does not in your case.
Suggestion: try running the Acrobat Cleaner Tool http://labs.adobe.com/downloads/acrobatcleaner.html then reinstall Reader.
Note: the Acrobat Cleaner Tool will also remove Adobe Acrobat, if you have it installed.

User's association broken - Unity

Similar Messages

Maybe you are looking for