User's Page Layout in Adobe XI does not work

I'm having a hard time to configure the default page layout on my Adobe Reader XI version.
It's really driving me crazy, I've already tried to edit my user preferences as "single page continuous" and "fit width", though every single document opened by the "latest and best version of Adobe Reader" is in "single page" and "100%"...
All right... It's very annoying indeed, though it's not the worst part yet. Having assumed it's just impossible to make a real "user default layout", I've tried to adjust it manually, but when clicking at any other page, the freaking "single page" and "100%" zoom come back!
I've seen people with the same problem in other forums forum before, but no one had a clue how to fix it.
Thanks in advance,
Vitor

While I'm not sure how many different problems might cause the same symptom, the only time I've seen something easy work to fix this is a change in Preferences > Documents > Open Settings. The checkbox Restore Last View Settings When Reopening Documents overrides the settings in Preferences > Page Display > Default Layout and Zoom. I would say though, that in the case where this worked, the view did not reset as you paged through the document. That sounds horrible.

Similar Messages

Adobe photoshop cs2 download on adobe website does not work- the serial number does not work?

photoshop cs2 download on adobe website does not work - the serial number given isn't recognised when you enter it when trying to install. the live chat at adobe cannot help and suggested that I may find the answer here. Can anyone help with this?

Adobe has decommissioned the CS2 activation servers, so your old serial number is no longer usable.
If you download the special non-activating version of CS2 that Adobe has made available to licensed CS2 users, you MUST also use the new serial number provided by Adobe on that download page:
https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads
That S/N does work. I double checked.

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

Adobe Fourms does not work with Opera too well

Adobe Fourms does not work with Opera too well. I have to use in Opera "Identify as Firefox just to post this message!
I also have run into the same junk with Hotmail.
Web Design Tip: Always code for Opera and all other browsers will fall in line most of the time.

dave milbut wrote:
of course you're right east texas. hadn't noticed that. bad bad adobe. someone smack them with a rolled up news paper on the snout!
I've installed a button in my Firefox tool bar to toggle iFrames on and off through a Firefox add-on called "Toolbar Buttons".
The forum Reply Editor does not work when iFrames are blocked, so I need to toggle them back on when posting, then back off. I imagine that's better than having them on all the time.
Message was edited by: Ramón G Castañeda

Adobe Story does not work. I cannot even share a script with a collaborator.

Adobe Story does not work. I cannot even share a script with a collaborator.

Moved to Adobe Story Forum.

Centre Page with wrapper div tag does not work

Hi there,
I am trying to centre the content of my website with a 'wrapper' div tag but the div tag just does not seem to have any effect on the layout at all.
Here is how I do it:
1.) Select all the html in the body.
2.) Creating 'wrapper' div tag --> width: 768, left & right margin: auto, bottom & top margin: 0
I found this in an adobe tutorial and it sounds logical to me, but somehow it just does not work.
I hope someone can help me out.
Thanks a lot!
Anja

You need three basic things to center a page.
1) A valid X/HTML document type. This declaration always appears in the first line of HTML code. The good news is that DW does this for you when you create a new page. The bad news is that some other apps such as graphics editors don't always do this for you. If your page has no document type, hit File > Convert > choose one that fits your coding skills.
2) You need a container width in pixels or percentages. Most often this is applied to a #wrapper but it can be applied to your body.
3) Finally, a margin-left and margin-right of auto (browser default).
CSS:
body {
width: 900px;
margin: 0 auto; /*centers page*/
text-align:center; /*centers older browsers*/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Adobe Reader does not work-how to use adobe reader on Lion

I was trying to print an international label on eBay via Adobe Reader, and was very dissapointed and shocked that it does not work on Lion.
I was so happy that I figured out how to use adobe reader on Lion, and hope I can help anyone else who is frusterated too.
Step 1. Download Google Chrome
Step 2. Printe your international label, or whatever you need to do that uses Adobe Reader

Thanks Shelly! I too was having trouble and thought it was something wrong with my Mac. I still have a big though. When I try to print the saved pdf file, I get a pop-up that says "The document could not be printed. There are no selected pages to print" even though I am looking at the complete doc. It's there and in my print prompt "all pages" are selected to print. The way I got around this, is by emailing the pdf file to a gmail address and viewing the attachment via Google Docs. It loads perfectly and prints without a problem.
Carla

I have a license for CS3 Design Premium but no disk. Where exactly can I download the software? The solution offered on the Adobe website does not work ...

I have a license for CS3 Design Premium but no disk. Where exactly can I download the software? The solution offered on the Adobe website (CS3-Produkte herunterladen) does not work ...

If the page you linked does not work then it should so what happens when you try? It is possible that it might be a simple matter of you enabling cookies or trying another web browser.
You can also try to download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

Adobe flash does not work on bootcamp windows 2002 xp. down loaded to windows. works with Mac. No program folder for such. shows up in "add delete programs" (in setting) but without a file size. I have a MacBook Pro purchased new in June 2010.

Using bootcamp (windows 2002 xp) I down loaded adobe flash player from the windows platform. told me it installed successfully. however does not work in windows, does works in mac. in xp there is no created program folder for such or created short cut. In the control panel (xp) in add/delete programs it is listed but wihout any file size or frequency used. I've deleted & reinstalled numerous times. Mac OS is 10.6.8. Windows is 32 bit. Can't find a thing that discusses this. THANKS!

I just now posted it Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913

My Mac (Mac OS X Lion 10.7.5) downloads the newest version of Adobe, it does not work. Why?

My Mac (Mac OS X Lion 10.7.5) downloads the newest version of Adobe, but Adobe does not seem to be working, as I cannot download the pdf documents I need (and I get yet another message stating I need to download the newest version of Adobe). Everytime I try, I get a message saying it will not download. I have tried to download the newest Adobe version dozens of times. WHat is not working?

angies70279651 wrote:
... the newest version of Adobe...
...of Adobe what ? Adobe is the name of the company that literally offers hundreds of different software products, each of which has a specific name. Unless you tell us what you downloaded, we have no idea what "does not work".

Adobe Audition does not work together with Audigy sound cards.

Dear friends, pleasae, help. I use Adobe Audition sound processing program, my sound cars are of the Audigy line. Recording control does not work, a known bug, says Adobe. Play control works fine, but I'd like to make quality recordings. Something is not O.K.with the ASIO system, I figure. The case is the same with PCI as well as PCMCIA Audigy products.
Tell me, please:
-Is there a patch or workaround to fix this problem?
-If not Audigy, what sound cards then?
Getting help from Adobe isn't quite simple, but maybe, Audigy fans know better.
[ordas]

If you mean the recording source/level control in Surround Mixer (etc.) ... it is not working because of it's bypassed by the ASIO driver ... so, it's not a bug but normal behaviour. You just adjust the recording level in Audition (or in any other software). Normally you need to select
- "AnalogMix()" input port option for analog line sources like Line-In, Audio CD, AUX-In, etc.
- (Mix L and Mix R are equal w/ the famous "What U Hear" ...
- S/PDIF for digital input
- etc.. here are some reading on Creative Audigy ASIO matter -
http://forums.creative.com/creativel...essage.id=1726
Remember also set monitoring properly in software so you can hear what you're recording. This is normally set through a tiny 'speaker icon' found in every tracks header ('settings options').
BTW, if you check the "Wave" source channel/slider when running in ASIO mode, you'll find out that it won't work either (it's all the same if you mute it). This is normal behaviour too, even when working in WDM/KS (Kernel streaming mode (or w/ Asio4All (which uses WDM/KS functionality))) ... it's just because of the kmixer is being bypassed ...
jutapa
Message Edited by jutapa on 12-14-200601:07 AM

Adobe Muse Hide Adobe Muse Does Not Work

I have noticed that choosing Adobe Muse > Hide Adobe Muse does not hide the program. The program remains but goes in the background and another program comes forward.

Okay, I just checked and the issue seems reproducible at our end as well on version 10.8.x.
We have logged a Bug for same and you might see it fixed in future releases of Adobe Muse or an AIR update if theissue is related to Adobe AIR.
Unfortunately we do not have a good workaround for you as of now. However I would suggest you to use Command+Tab key cobination to browse through the running applications so that you can use the other applications with Muse.
Apologies for the inconvenience.
Regards,
Sachin

Adobe Flashplayer Does Not Work.

Flashplayer Does Not Work. Installation Finished . What Do I Do ???

Flash Player Help | Installation problems | Flash Player | Windows
Flash Player Help | Installation problems | Mac OS
Mylenium

What does DE want when it asks for Adobe user name and unlock code? I have tried my acct ID, user name with my password but that does not work.

This is the screen I get when I want to add a book to digital editions.
All I want to know is what they are asking for. I thought it was my user name and password but all kinds of combos or scr name, acct name, login name and password does not open the book

Maybe this.
Fix iPhone Apps Stuck "Waiting" During Installation
Try update the apps one at a time

After installing or upgrading to Firefox 31, starting Firefox does not show homepage, customize shows a blank page and the option button does not work

I am the Windows admin for a university department and install PCs with Firefox all the time. This problem does not happen with every PC I maintain, only a select few (different model laptops with Windows 8.1 and update 1.) Until today, it only happened with new user accounts (with admin rights) that I setup on the laptops for our staff. Today this happened with The Administrator account while setting up a new laptop. In all cases so far, I install Windows from a saved image that was created using sysprep.
I have tried the many suggestions of resetting Firefox, deleting the users Firefox profile, deleting the users Windows profile, uninstalling/reinstalling Firefox, uninstalling/reinstalling Firefox and the latest Java, but nothing helps. After uninstalling, I run an app to delete temp files and caches and will even manually remove registry keys HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. Plus I reboot and make sure the install folder is deleted after uninstall.
Results are the same: after installing Firefox 31, the initial setup window for migrating IE and/or Chrome pops up and after clicking the Finish button, Firefox starts, but does not show the initial new user page, only a blank page. Clicking on the Options button (3 bars) does nothing. Right-clicking in the proper area, the popup menu appears so I can choose to Customize, but that only opens another tab with about:customize in the URL and the page is blank. From the right-click popup menu, I can enable the Menu Bar and get to Options from that.
My latest attempt has helped a little. I uninstalled Firefox 31, cleaned up, deleted user Firefox profile, rebooted and then installed Firefox 30. Inital startup runs, and tells me I'm not up to date, and the Options button works. But I still cannot customize.
I then upgraded to Firefox 31, but then it's back to no startup page, no options button and no customize. I can downgrade to 30 and get all but customize working again.
Only Addon is one for McAfee Scriptscan for Firefox 15.1.0, which just after installing is disabled.
Any help would be appreciated. Thank you.

Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
Normal or safe mode still has same result. No startup, no option button and no customize.
Thanks for your help. Got any other suggestions?

User's Page Layout in Adobe XI does not work

Similar Messages

Maybe you are looking for