User SAP* is active. No other users can log on. Now What?

After the last time I restarted the portal, I get the following message when I try to logon:
User SAP* is active. No other users can log on
Before the reboot, I was trying to configure LDAP. I changed the Data source from "Database Only" to "Read-Only Microsoft ADS (Deep Hierarchy) + Database". I also, tried to create a Superuser/Password. You can logon using SAP* and see the users from LDAP.
Any thoughts? Also, can anyone clarify the configuration option:
SAP* User Configuration
Enable SAP* user (If you disable the SAP* user, enter a superuser ID and password below)
Superuser Name
Superuser Password
EP6.0

Bill,
You have to assign a user the super admin role. Once the user has this role, go to the UM Configuration (System Admin--> System Config --> UM Configuration) and uncheck the Enable SAP* User option and enter in the superuser name and superuser password. Restart the portal and users should be able to login.
FYI. No users can login to the portal if sap* is active.
Regards,
Marty

Similar Messages

Safari not working on my computer user account, works fine for other users.

Safari hangs up and barely opens a page, or the beach ball just spins and then Safari dies. This is only happening on my user account, and on the other user accounts Safari is working fine. I have tried most recommendations, including resetting Safari, inserting DNS 208.67.222.222 and 208.67.220.220, and turning off plug-ins.
Thanks for any help on this.
I am using Safari v.4.0.4

Just wanted to add that I am also have the exact same issue. I have not added anything new to my computer. I have not downloaded anything off of the internet, installed any new programs, or changed any preferences. I am running 10.6.2 and Safari 4.0.4
This is extremely frustrating. It makes absolutely no sense.

On my new iPad under the space category it shows I have 5.5gb occupied by 'Other" data - Can you tell me what this is exactly and how can I reduce it Thank-you

On my new iPad under the space category it shows I have 5.5gb occupied by 'Other" data - Can you tell me what this is exactly and how can I reduce it
Thank-you

How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

I cannot see other user's tables via the OTHER USERS link

I'm using SQL Developer version 1.5.0.53 Build MAIN-53.38.
I log into the database as a user who has SELECT access to tables in other schemas via a ROLE.
In the SQL window, I can select from those other tables as I expect.
But, when I go down to the bottom of the screen and expand the Other Users link and then go down to one of the schemas that my account can select from,
no tables appear.
I've tried a couple of things so far to no avail.
1. I first granted SELECT ANY TABLE to my account. I then killed my SQL Developer session and started a fresh session. I'm seeing the same results.
2. I saw a post in here that said I needed to grant SELECT on the ALL_USERS view. So I removed the SELECT ANY TABLE privilege and granted the SELECT on
ALL_USERS to my account. Once again, I killed the SQL Developer session and re-logged in. Same results.
Is this a bug?
Thanks,
John

well, it turns out I'm not as dumb as I though. My end user could still not select from other user's Materialized Views. Some more research showed that granting either SELECT ANY TABLE or SELECT_CATALOG_ROLE fixed the problem for him. I'm sure that a more restrictive grant on one of the DBA_ tables would also work (probably DBA_MVIEWS) but I've not tried that.

Data Uploads done with one User Id not visible to other users in SPM

Hi,
Data uploads were successfully carried out by one of the SPM users. However, other users (with different user id) are not able to see anything in the Data Upload Summary screen.
Is there a restriction on the visibility of Data Upload Summary for data uploads carried out with one User id to other users in SPM? A similar behaviour is observed for other screens within the Data upload workbench.
Incase this is not the expected behaviour, it would be great if you could please provide pointers to possible reasons for this.
Just for your information, all users have been granted same privileges in the SPM application.
Thanks in advance.
Regards,
Ashish Sharma

Hi Ashish,
No this is not the expected behavior. We have seen this issue for other customers in the past but the reason has always turned out to be role related.
Can you ensure that the required SPM roles are assigned to the user who do not see the DM data both in ABAP as well as portal.
Thanks,
Divyesh

Grant to a specific user and deny for all other users

I have 100 users. Out of 100 users, i have windows & sql authentication users. I have a view "SQL_CONFIG_V" and want to give access to "corp\abc" (windows authentication user) and "poc" (sql authentication user) and all
system user id's(by default) like sys, information_schema etc. I want to deny all other users to see view defintion or alter this view "SQL_CONFIG_V" except the users that i specified here.

You can deny access to those users to the database, or they are have the access but you do not want them to SELECT that specific view? Do the users members of db_owner role?
GRANT SELECT on viewname TO freddie
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Copying user specific reporting variants to other users

Hi,
Does anyone have experience in copying user saved variants to other users?
We'd like to create a few complex variants for reporting and then distribute them to all of our users.
Thanks!
-Miikka
Edited by: Miikka Åkerman on Nov 18, 2009 2:40 PM

Hi,
In reports input Screen you have this option,
In selection screen you can find, Save as a New varient, give some name and save , don't select Save as User Varient and save it.
Note: Check with the select Save as User Varient & Use as default Varient options.
Thanks
Reddy

Iplanet Messaging 5.1. Delegated admin: I cannot log users defined in sub OU like ou=consumer,ou=AA,o=mydom with nda login page. Only users defined in ou=people,o=mydom can log through the iDA.

That is correct, for some insane reason iDA is hardcoded to only look for users under ou=people.

Data Execution Prevention prevents itunes from opening on my user ID, but not every other user ID.

I completely deleted every Apple file from my computer. There are 4 user IDs on my computer. Mine is the Administrator, my husband's ID my son's ID. and a completely new ID I set up to see if I could get iTunes to work.
I reinstalled iTunes 10.5 on my Administrator ID. The installation went fine, but iTunes will not open in my ID, or my husband's ID. I get the message that Data Execution Prevention has closed it. iTunes will open in my son's ID, as well as the new ID I set up for iTunes testing.
I have tried uninstalling (deleting ALL Apples files) and reinstalling on my ID as a Standard user. Same thing. iTunes doesn't work on my ID or husband's, but does on the other 2 User IDs.
I have not activated Microsoft Outlook on the 2 IDs where iTunes works. Outlook is activated on the other 2 User IDs.
Does something about Outlook cause me to get the DEP error? Is there a way to fox this problem? I really don't want to have to go to a completely different User ID everyt ime I want to use iTunes.
I am using Windows Vista Home Deluxe, and installing the 64-bit iTunes download on the Apple.com website.
I have used instructions from several documents here on the Apple boards. The ones I use most are "iTunes for Windows:Doesn't open after upgrading in Windows Vista of Windows 7". "iTunes for Windows of Windows 7:Troubleshooting unexpected quits, freezes, or launch issues", and on this one, I followed the instructions for user-specific troubleshooting. I also followed the instructions in "General installation troubleshooting".
I have uninstalled and reinstalled iTunes so many times, i can almost do it in my sleep. Somebody please help. My iPhone and iPod need updating!! Thanks!!!

OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Iplanet Messaging 5.1. Delegated admin: I cannot log users defined in sub OU like ou=AA,ou=people,o=mydom with nda login page. Only users defined in ou=people,o=mydom can log through the iDA.

Correcct, for some insane reason iDA only looks under ou=people to find it's users. As far as I know this can not be configured and it is hard coded into iDA.

Top and bottom of FireFox window disappear in seconds (the window expands too far). All other windows operate normally. Now what? I've uninstalled and reinsta

I was using Firefox for a few years with great enjoyment. Recently I opened it and within a second or so, it enlarged to the point that the top and bottom of the screen expanded off the screen. No other windows in any other program are doing this. The only way to close it is by using the task manager. Very frustrated. What other info do you need?

Hi ConnieHampton,
FIrefox will remember the last window size you had, which is why it keeps opening too large each time you open and close it. To fix this, try resetting Firefox: https://support.mozilla.org/en-US/kb/changes-toolbars-and-window-sizes-are-not-saved?esab=a&s=resize+window&r=7&as=s
If you don't see your menu bar, you may be in full screen mode, and can turn it off by following these instructions: https://support.mozilla.org/en-US/kb/how-make-firefox-and-websites-go-full-screen?esab=a&s=full+screen&r=0&as=s
If this doesn't work, please let us know and we'll figure out another way to fix it.

HT201441 I have problem for activate iPhone because I type password incorrect many time ,my rescue email also invalid ,so I can't use now ,what I have to do?

Need help how I can activate again icloud to start my iPhone 5s

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-email address https://forums.adobe.com/thread/1446019

I have just re-installed itunes. The previous use is still listed. When I try to login with my account, Apple says to view my account. When I do that, it revers back to the other user. How do I get the other user off of my system so that I can use mine

I have just re-installed itunes. The previous user is still listed. When I try to login in with my account, Apple says to view my account.
When I do that, it reverts back to the other user. I want the other user totally off of my system. How do I do this?

Try Store > Sign Out followed by Store > Sign In...
tt2

How to delete user SAP* from database in MaxDB

I´m unable to login with user SAP* into client 000 but in other clients.
How can I delete the user SAP* from client 000 that I can login with the standard password?
Is it possible within a transaction in another client or only on DB?

Hi Damian,
You need to connect to MaxDB SQL studio using user SuperDBA,admin
Run the following commands
select bname from <SAPSCHEMA>.USER02 where bname='SAP' and MANDT='000;*
This will list user SAP* from client 000
delete from <SAPSCHEMA>.USR02 where bname='SAP' and MANDT='000';*
This will delete SAP* from client 000.
Regards,
Deepak Kori

Report visible for one user but not for other user

Hi all,
We have a situation where a report is visible to one user but not to some other user. What could be the possible explanation for this? Please let me know.
I need quick responses.
Thanks in advance,
Sananda

Hi Sananda,
Just assign the saem roles as the other user who can view ..
You can inform the Auth/basis team and they shud be able to do this..
The T Code is RSECADMIN>user Tab>Assignment>user.Display and BView the roles here..
or goto SU01 and check for the Roles Tab.....
The New user must have the same roles as that of the other..
Rgds
SVU123
Edited by: svu123 on Sep 22, 2010 7:14 AM

User SAP* is active. No other users can log on. Now What?

Similar Messages

Maybe you are looking for