User SAPUSER has no profile definition

Hi
i am unable to run RF transaction(LM00, LM01, LM71, LM*) in SAP. I am getting
following error
"User xxxxxx has no profile definition"
Message no. LF192.
Any help would be appreciated.
Regards
Raju

Hi,
If these transactions are working for other users, RF Queue Management should be missing for your user id in the configuration.
Maintaining your user id in the RF Queue Management should resolve the issue.
SPRO -> IMG -> Logistics Execution -> Mobile Data Entry -> RF Queue Management -> Assign Processor to Queues
Hope this helps!!!
Thanks,
Hemanth Nandigam

Similar Messages

Has no profile definition

Hi All,
when I am running LM01 , it gives the error : user 'abc' has no profile definition.
Please help
thanks in advance,
rgds,
Madhuri

its checking in the table :LRF_WKQU using FM : L_USER_DATA_GET
some thing related to warehouse users.
from which Tcode this table gets updated?
rgds,
Madhuri
Edited by: madhuri sonawane on Nov 3, 2008 12:51 PM

Web Console has no profile definition

Dear Gurus
I've installed the Web Console. Configure the profile at SAP Console Adminstator. From URL, I can access the SAP system. When I sign on to SAP , I'm getting the following error:
Message
E: User SAPSupport has no profile definition
I can login with this ID via SAPGUI.
Please advice.
Thanks

Hi Raju,
check our previous post for the same topic - most probably the same issue here....
Regards,
Oliver

In mobile data entry geeting erro user has no profile definition

Hello Gurus ,
I am trying to logon to handheld to the systme .. i am getting this error " user has no profile definition ..m
What could be reason for this error ??

In the configuration Maintain an entry with your user id in the following table
SPRO--> Logistics Execution -->mobile data entry --> RF Queue Management --> Assign Processor to Queues.
If an line item already exists, copy that and change the username, if its blank (which will be in a fresh client) input all the parameters.
If everything is configured properly for ur user id, when you type LM00 it should show you the screen on the RF gun, or else you will get the same error.
try this, it should work

Error message: User has no profile definition

Hello,
When I try to run a custom transaction (related to SU assignment- program SAPLSHL2), I get an error message
" User has no profile definition"
Could you please explain what it means and how it could be corrected?
The SU53 analysis shows authorization checks to be successful.
Thanks in advance!

you are getting error bcoz of the program below,
Form USER_OWN_DATA
read data of active user into header line of lrf_wkqu
FORM USER_OWN_DATA CHANGING LRF_WKQU LIKE LRF_WKQU.
CALL FUNCTION 'L_USER_DATA_GET'
       EXPORTING
            I_UNAME        = SY-UNAME
       TABLES
            T_XUSER        = XUSER
       EXCEPTIONS
            NO_ENTRY_FOUND = 01.
IF SY-SUBRC = 0.
    READ TABLE XUSER WITH KEY STATU = VER_ON.
    IF SY-SUBRC = 0.
      MOVE-CORRESPONDING XUSER TO LRF_WKQU.
    ELSE.
      MESSAGE E191 WITH SY-UNAME.
    ENDIF.
ELSE.
    MESSAGE E192 WITH SY-UNAME.
ENDIF.
ENDFORM.                               " USER_OWN_DATA

User |TMSADM has no RFC authorization for function group SYST

Hi All,
When we release any transports we are getting the above error, this is basically due to the fact that implificaiton of complex password parameters, to supress this we had followed the note 761637.
I had regenerated RFCs and reset TMS user, but still no use any ideas?
This is definely not the issue with Authorization as user TMSADM has right profiles.
Reg,
VV

Patch Downloader wrote:Patch Downloader wrote:>
> ... when I reset my TMSADM user though it says it was reset, but SU01 for TMSAMD user is intact , it did not change the user type to SYSTEM, it kept as it was before Communication data.
Then the reset is not working (which would be consistent with the note). You can administrate the connections (SM59) and user (SU01) manually now. Try to change the user type in SU01.
>
> I did not get the user to test the release , but I am checking in the RFC connection for this RFS desitnatation and it failes with same error.
You stated before that releasing the transport was failing, not the authorization test in SM59.
Note that default system settings for the "Connection Test" only verifies that there are no network gremlins between the servers and the RFC settings, it does not verify that the logon was successfull. The "Authorization Test" on the other hand verifies the authentication was successfull and the authorization to perform the RFC call was checked and successfull.
Most likely, the problem is caused either by the user type AND / OR the password is in fact not correct (or is arriving incorrectly - See SAP Note 1023437).
Some other suggestions:
- Check ST22 to see whether more details are available on the error (check source and target destination).
- Check whether the user doing the release is missing an authorization to use the TMS.
- Check the value of your system profile parameters auth/rfc_authority_check and rfc/reject_expired_password?
Cheers,
Julius

Error Message: User has no profile in this organization

Error Message: "User has no profile in this organization."
Chrome browser. Am downloading Mozilla in the meantime and will report after.
Attempting to log into various TV subscription cable channels with a valid ID and password which ordinarily allows me to enter the on lne version of the cable channel, such as HBO and TNT and USA. Works fine on Showtime. Something is local to these channels, I suppose yet suggesting that something in the computer is blocking also. Everything worked fine with my HP notebook, all subscription/ login required channels were accessble but this new computer actually refurbished but like new) an HP Elite sff 8000 seems to be blocking me from logging in. Could it be the cable channels? Also got a message that indicated something about "User repository". Please sugget a detailed fix if there is one from this information.
HP Elite 8000 SFF, (Desktop) WIN 8.1 Professional, Intel Core 2 Quad 2.83GHz processor. Internal 750GB HDD. 8GB RAM memory. 3 external HDDs : 1TB primary external, 1.5TB backup external, special backup 250GB external (all externals for files, music, video). Please note: 750GB HDD for WIN OS and programs only. Backed up to an 80GB external Image Maker via WIN 7 system image maker. 1 DVDRW drive. 10 USB ports. Plus there are four extra USB via PCI card. 14 USB ports in all. 240 W power supply. Printers: LJ 1020, HP AIO 6480. 3 Monitors, 20" Acer; 22" Acer; 37" LG TV.
ALSO:
HP ENVY: 15 ENVY 15634 Laptop 8GB Memory 750GB Hard Drive Natural Silver
And:
HP DV6928us, (Notebook)
AND:
external 1.0TB HDD, 250GB external HDD, 1.5 TB external HDD,
AND:
HP LJ 1020,
and:
HP J 6480 AIO,
Windows 7 Home Premium on Desktop, WIN8 on ENVY

Did you have any luck with FireFox?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

User has no profile in this organization. Contact your system administrator

Hi,
I have been attempting to install and have AM 7.2 working properly with the J2EE Policy Agent for V9 of Sun's App Server. I have followed mostly the default values during setup. I believe I have the installed properly. In order to verify that everything is working properly, I have also installed the sample app that comes with the J2EE Agent.
I made a few changes to the README that came witht the sample app by changing the default org setup in the exaple to dc=sample,dc=com. I setup up the policies, users, groups and roles as specified in the read me. However, when requested to authenticate, the access manager responds with "User has no profile in this organization..."
It is quite mystifying as to what this error actually means unless there are organizations within the default realm other than the one it actually came with. Which is what I am using.
Any help would be deeply appreciated and thank you in advance.
cheers
su./hail

Hi,
I had done as you suggested. But there is a problem. Once this is done, the amadmin subject can no longer log into the application amserver. However, the agent sample works. How I got around the the problem is to create another Realm (with sample as the parent realm). In this second realm I set the User Profile to ignore. Once done, I went about creating the subjects in the second realm. What was was kind of strange is that the URL policies had to be defined in the Parent realm.
Once so done, amadmin could log in and the application iteself worked as advertised.
Thank you for your input.
su./hail

The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)

Hi All,
I have created a user 'Bitest' and group 'Bi_Test_Group'. Assigned the user to the group and the group to BI consumer role.
I gave access to only procurement and spend catalog folder reports and Dashboards.
When I login to BI Presentation Services with above created user and open any procurement and spent catalog dashboard i am getting below error in every report.
Its BI Apps 7.9.6.3 installation.I gave read access to group to all procurement and spent subject area.
Error Codes: OAMP2OPY:OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 23006] The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"')}
SQL Issued: SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"
Please help me in resolving this issue and getting results on Dashboard.
Thanks in advance
Thanks,
Sandeep

Check your query or connection pool settings etc

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.
I'm NOT in any way a Terminal Services expert and I need help trying to get an application program working in a multi-user environment.
The issue is that the printer changes for every user that is logged in. The application needs to print NOT to the default printer, but to a "special" printer which is selected in the application... let's call it a label printer to simplify the explanation.
You have your default regular printer, easy for the application to find that one, and then you have a special printer that labels get printed onto. The application needs to know what printer is the label printer. So we allow the user to select that in the
application and the selection is stored in a config file in
C:\ProgramData\mfgr\prog\setting files
I don't have access to the application so I can't change how this works.
In the "regular" world, selecting the label printer driver to use should be per machine, NOT per user. When a new user logs into a machine, the physical printer doesn't go "poof" and a new printer suddenly appear. Same printer for all
users.
Yet in terminal services, the physical machine is "merged" with the virtual machine on the server. And there can be many users logged in at the same time. So each users real machine (and real printer) is injected into the "fake" terminal
services machine. The name of the printers is made unique for each user. So the printers DO go "poof" and change names depending on the user logged into terminal services.
So user "A" logs in and sets up the application to print to "LabelPrinterForUserA" (or whatever the name of the printer happens to be), that setting is stored in the ProgramData subfolder, and all is well. Later, user "B" logs
in, and when they print, the application tries to print to "LabelPrinterForUserA" which doesn't exist for user B or is only accessible by user A. If user B re-configures, that breaks it for user A.
SOLUTION 1: The way that /should/ work (in my mind) is that you define one "generic" printer in Terminal Services... call it "Virtual Label printer" and when the user wants to print to it, the print job gets re-directed back to whatever
physical printer is actually connected to their local workstation. There is a map of virtual printer to actual printer depending on the current user. The application is told once to print to "Virtual Label Printer" for all users.
SOLUTION 2: Or... there should be some way to make the ProgramData sub folders separate per user. E.g. when user "A" tries to access:
C:\ProgramData\mfgr\prog\setting files
they actually get
C:\UserData\UserA\AppData\mfgr\prog\setting files
and user "B" gets
C:\UserData\UserB\AppData\mfgr\prog\setting files
So the question I have is: Does either of those solutions exist hidden somewhere in the setup of terminal server? Or is there another way around this issue that I don't know?

I don't really have a "for sure" answer to this, but because people here can't seem to deal with a question that hasn't been answered I'll provide the best answer I did receive from ServerFault.com user Nathan:
I can feel your pain with using old software on terminal servers ...the solution I've come up with definitely won't scale as it requires some manual configuration, but I've gotten this method to work with our label printers (which require to be
printed to an LPT port...yep, that old).
Share your USB-connected printers to the network on each machine. Then, have the user log in on aunique session for each of them
(a TS account cannot be shared among computers for this to work) and install a network printer pointing to the USB one they shared. Try to use a DNS name to account for possible DHCP movements.
After, it should work. Each user can do this since display names can be identical as long as the ports are different (which they are).
This was clarified by the following series of comments:
I think you are on to something here, and I originally advised the admin to do this. The problem he ran into is that it setup the printer names in the TS as "printer on usersworkstation"
and he could not rename it except to change the "printer" to whatever. E.g. the "on userworkstation" remained. I believe there is another way of installing the printer which avoids this, but I can't find it. Ages ago, one used to do NET
USE LPT2 \\computer\printer password /USER:domain\user /PERSISTENT:YES and then tell the driver to print to LPT2 –  James
Newton Mar
17 at 16:21
@JamesNewton That's actually the exact method we used. The way around the "network printer" part is to install it as local printer and map it to a TCP/IP port that way. –  Nathan
C Mar
17 at 16:28
You mean in the case where the printers are TCP/IP connected and not local USB / LPT to the users workstation? That makes sense. Wonder if this will work for USB connected printers... –  James
NewtonMar
17 at 16:35
@JamesNewton You'd share the local printer on the client's PC then on the server connect via TCP/IP to it. You'd need static addresses or use DNS names if DHCP, though. –  Nathan
C Mar
17 at 16:51
Ah. Yes. I see. Looks like the LPT thing should work even with a USB connected printer:superuser.com/questions/182655/… –  James
Newton Mar
17 at 17:09

Has anyone heard definitely that Apple has stopped supporting anything but IOS 7 for FaceTime?

Has anyone heard definitely that Apple has stopped supporting anything but IOS 7 for FaceTime?

No such announcement has been made.
From the various posts on the forums, it seems users on various devices and versions of iOS are having issues, even those with iOS 7.
~Lyssa

[nQSError: 23006] The session variable, NQ_SESSION.S_Budgetary_Control, has no value definition.

Hi All,
I have created a Initialization block named Budgetary_Control
the query entered in the data source is
select
     column
from
     table
where
     user_name=':USER';
then i selected a connection pool and tested with 2 USER
and it gave me expected result.
in the Edit data target i gave a name to this variable as S_Budgetary_Control and a default valus as -1
i checked on row wise initialization test again
it show me multiple record.
the i save the rpd and deployed the same to the server.
now when i trying to create a report using this varriable like VALUEOF(NQ_SESSION.S_Budgetary_Control) it gave me error like
[nQSError: 23006] The session variable, NQ_SESSION.S_Budgetary_Control, has no value definition.
Please help me to get rid of this issue.

set Required for authentication
and followed by Authentication init block as Execution Precedence
~ http://cool-bi.com

Has no value definition - Session INIT Block.

Hi,
I have a Session initialization block for Fetching Departments from a Security table for the user logging in.
One user can have Multiple Departments assigned to him, so i enabled Row-wise initialization in INIT Block.
But when a user not assigned to any departments logs in, i am getting 'Session variable has no value definition' error in all the reports. But i should instead pass a default value when SQL in INIT Block is not returning anything. Like '0'.
How can i do this? please respond.
Thanks
Swami

Hi Swami,
When the query fetches a result set, the variable gets initialized.
But, when the query doesn't fetch any rows, the variable doesn't gets initialized and hence "no value definition" errors out.
So, to avoid this,
In the query itself, place an exception condition which returns '0'.
select dept_name from table
where user_name = ':user'
UNION
select '0' from table
where user_name <> ':user'or you can use like this
select CASE WHEN user_name = ':user' THEN dept_name ELSE '0' END
from tableP.S: Query written orally. (Pls adjust the query accordingly)
Regards,
Raghu

The session variable has no value definition

Hi Gurus,
For all Dashboard reports and Adhoc reports suddenly we are facing the below error for some users
A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 23006] The session variable, NQ_SESSION.AREA, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)
In those dashboard reports we are not using any Area prompts even if we take only area column in analysis also it is showing the same error. But for admin the reports are coming fine only for some users it is showing like that but previously it was fine.
Regards,

Hi,
this means your init block is not working. Check the init block why its not resulting in any data.
only when init block doesn't not result in data , server checks for default value for the variable.
Since there is no default value, you get this error.
Init blocks can fail because
1. connection pool is not working.
2. The table or view does not exist
3. no data in the table
4. filter in the sql in init block is not initialized if its coming from another session variable.
typically no data should bring no results in a report.
Since you have a session variable being part of the report, and that variable failed to initialize you get this error.
Thanks,
Satya Ranki Reddy

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this

<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile.

User SAPUSER has no profile definition

Similar Messages

Maybe you are looking for