User settings for displaying numeric values

Hi All,
in transaction su01,the default settings are displayed as decimal notation: 1,234,567.89 what does this value mean??
does it mean for all the values it will divide by 1000?????

Hi Tilak,
Plz find the below threads for your reference...
Change in Decimal Points with comma
Decimal Notation
Regarding Decimal Notation
Defualt Value of Requisitioner
Again back to u all :)
can not put decimal quantity in BOM quantity
Also find the below search link...
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=defaultsettingsinSU01decimal+notation&adv=false&sortby=cm_rnd_rankvalue
Assign points if this helps u...
Regards,
KK.

Similar Messages

Forecasting and User Settings For Displaying Historical Values

Hello,
I am attempting to perform a forecast model. After entering the selection criteria I get the message "Forecast includes only historical values as from P 01/2011 --> F1" .
when I expand on the message I see
Forecast includes only historical values as from P 01/2011 --> F1
     Message no. MA 559
Diagnosis
     You want to carry out the forecast for the historical values from 04/2010 to 08/2011. However, historical values prior to P
     01/2011 are zero. The system response to this situation depends on the user. The following responses are possible:
     1. The entire historical period is included nonetheless.
     2. Historical values before P 01/2011 are not included.
     The user setting that has been made for you corresponds to variant 2.
Procedure
   You can change the historical values in the period from 04/2010 to 08/2011 manually, regardless of the user setting. If
   variant 2 applies and zero values before P 01/2011 are then corrected, the historical period used by the forecast is extended
   to include this date or period.
Questions
   1. Where does the "user setting that has been make for you corresponds to variant 2" reside in SAP? How can I see this?
        What other variant values are available to me? How would I change this value if I wanted to? This seems to indicate that
        this is a user profile setting since it's dependent on the user????
   2. I am ?assuming? that variant 2 means that "2. Historical values before P 01/2011 are not included" is the choice, above,
        that is being made. I ?assume? that variant 2 means that the forecast extends back as far in the selected period as there
        is a value that is found that is not zero. Is that correct?
Any insight/help would be appreciated.
Thanks!

Hi Tilak,
Plz find the below threads for your reference...
Change in Decimal Points with comma
Decimal Notation
Regarding Decimal Notation
Defualt Value of Requisitioner
Again back to u all :)
can not put decimal quantity in BOM quantity
Also find the below search link...
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=defaultsettingsinSU01decimal+notation&adv=false&sortby=cm_rnd_rankvalue
Assign points if this helps u...
Regards,
KK.

How to restrict the user to enter only numeric values in a input field

How to restrict the user to enter only numeric values in a input field.
For example,
i have an input field in that i would like to enter
only numeric values. no special characters,alphabets .
reply ASAP

Hi Venuthurupalli,
As valery has said once you select the value to be of type integer,once you perform an action it will be validated and error message that non numeric characters are there will be shown. If you want to set additional constraints like max value, min value etc you can use simple types for it.
On the project structure on left hand side under local dictionary ->datatypes->simple types create a simple type of type integer
The attribute which you are binding to value property ;make its type as simple type which you made
Hope this helps you
Regards
Rohit

How to disable the user settings for the transparent container

Hi Experts,
I have an form designed using VC - model, which as a input field and button. When i compile and deploy every thing works fine. I get the form as the output.I am able to call this form in the portal and I am able to get the page.
Issue: When i right click on the fields in the form I get "User settings for the input field AA" and gives me an option to Hide the field. Which the users doesnot want.
I tried it on the VC runtime where i don't get the right click option.
So kindly help me out in resolving this issue.
Thanks
Ketan

Hi Ketan,
If you have chosen the Rendering Client as WebDynpro HTML(by default it is set so) for the callable object, then you would invariably get the 'probelm' you're facing.
Instead you could set for the Object Definition -> Rendering Client as WebDnpro Flex in the Callable object (in Guided Procedures). Now you would not get that hide option.
But one simple question, why would the user want to right click on the field? Even if he hides the fields, he always has the option to make them visible again
Let me know if it's helpful
Regards,
Vani

Different user settings for scrolling in tables or ALVs

Hi Experts,
I have a strange problem.
I have a Web Dynpro Application that uses the UI Element table. For one user who uses it the scrolling mode is a scrollbar and for an other user the scrolling mode is a paginator. That appears not only for this application. ALL applications on the system have this difference for users. So, not only in tables does that appear. In ALVs too!
Does anybody know where I can configure this for every single user?
Thanks a lot!
Best regards,
Ingmar

The only thing I can figure is that the user getting the paginartor has accessibility turned on:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/19/e64941bfb4de2be10000000a1550b0/frameset.htm
That is the only option I know of that should override the system or application settings for scrolling. In particular accessibility can be turned on at the user profile level:
To do this, in transaction SU01 for your user name choose the tabstrip Parameters, insert the parameter ID ACCESSIBILITY_MODE with the value X, and save the entry.
Or within the portal:
To do this, in your user profile in the portal, under General Information select option Activate Accessibility (Screen Reader Required) and save your entries. This specification is evaluated by Web Dynpro ABAP.

MD04 - User Settings for Flexible Transaction Calls

Hello,
I want to create my user settings in transaction MD04. But when I am going to transaction MD04 -> Environment -> Own Favorites -> Maintain, I am not able to see option of 'New Entries' there. Generally we can see the options of Change, New Entries & Copy on the top of screen but I am unable to see that now.
Can anyone advice where to make setting for this to display? It looks authorization issue but actually its not. We need to make a setting either in SPRO or in any specific table.

Hi,
I tried your path in an IDES system ECC 6.0, and works just fine.
It looks like an authorisation problem after all.
Regards,
Mario

Can I have multiple user settings for one user?

In one user account I would like to save and access mutlipe users settings at the click of a button. Can this be done?

Hello Jake,
from the Appple menu you can change the location - the location describes your network settings, if you have wlan, ethernet, vpn etc, but unfortunately not the things you want to configure.
If you want to set up your desktops and your Dock with different working sets depending on your task, then you need to create different accounts, one for a new user "Jake The Writer" and one for a new user "Jake the Graphics Designer". This you can do from the "System Preferences" -> "Users and Groups". To add an account click the padlock in the lower left corner, then the "+" and define the user name etc.
If you click on "login options" you can set "show fast user switching". Then you can switch between your accounts from the main menu bar by clicking on the user icon in the upper right corner (right beside the spotlight searchfield).
For each new user you can set up the Dock and the items on the Desktop, when you login as that user.
However, seperate user accounts try to protect your data by sharing and permission settings. So you would not be able to access the data in your separate home folders when logged in from a different account. If you want to use these approach you should store your documents in the Shared folder and not in your home folder.
Best Regards
Léonie

How to write a formula for display the value by group

Post Author: abadugu
CA Forum: Formula
Hi
Could any one please help me on writing the formula for the below senario.
I'm creating Crystal report Via using ClearQuest (IBM tool) since this tool is not supporting subreport function. I'm planning to write a formula.
I have grouped report by request_type field (request_type field contains Validation Defect, Production Defect, Known Defect etc..)
right now my report output is grouped by request_type
ex:
Validation Defect
                     SUMMARY                                                          COMMENTS
Production Defect
                   SUMMARY                                                          COMMENTS
my question was
If request_type = Production Defect display pm_number value field otherwise display null
ex
Production Defect
PM#          SUMMARY                                                       COMMENTS
Validation Defect
                 SUMMARY                                                       COMMENTS
could you please help me writing a formula.
Thanks
Anand

Post Author: abadugu
CA Forum: Formula
It worked Thank you and I appreciated your help
Thanks

User settings for Default plant in some transactions

Hi gurus,
is it possible to get a default plant in any transaction that you enter ...
e.x In any Tcode or tcode MD04, i want my relevant plant ,ie ABCD to appear by default always.Whta would be the user settings I need to do
Thnx in ADVANCE
HKR

Dear Hemanth,
for every t-code u have settings options in tool bar
next to that u have save option
give plant & save from that option
then check the result
Regards
kumar

User-exit for displaying message in LT15

Hi,
I am looking for a user-exit (or another way?) for displaying a warning message when the user tries to cancel a TO via LT15 (under certain conditions). But the only user-exit that I found that would do the thing here is ZXLTOU02, but it's performed only in Update task - no message display possible.
Any ideas?
Cheers!

Thanks for your input Chidanand,
But I've already tried by setting a breakpoint in all available exits concerning TO confirmation/cancellation - none of them is reached when LT15 is executed. The only one is the one I mentionned, and it is being performed in update task - so no message issuing possible.....
Any other ideas?

User Exit for display User fields in MM03

Peace to All,
I was able to place user fields in Purchase View of MM03.
Question , how do I pull data from ZMARA table of my master data so that I can display it on MM03.
I will appreciate your help on this. Does anyone has a sample program to do so.
Thanks in advance,
Shilpa

Hi Shilpa,
Check the following user exit for MM03:
MGA00001            Material Master (Industry): Checks and Enhancements
MGA00002            Material Master (Industry): Number Assignment
MGA00003            Material Master (Industry and Retail): Number Display.
Hope this will help you....

Where are user settings for the JRE stored?

On a workstation, every user gets his own JRE settings (for example, changed the proxy settings). But for a deployment package, I need to set the proxy settings differently from the Internet Explorer settings.
Can't find it in C:\documents and settings\Administrator (or the user dirs), the registry, C:\program files\java\... - So where are they kept?!

Thanks, it appeared the windows environment settings rerouted to a similar path but on a different network drive! ;)

Error displaying numeric values with SPREADSHEET output

Hi, I'm using Reports 10g R2 and I have all my reports with PDF output, they render just fine.
I want to render some of them with SPREADSHEET output but don't know why in some case numeric values are rendered as ****** instead of the corresponding number.
The same report shows numeric values correctly in PDF but no in some Excel cells, just SOME of them, not all.
I know that Excel column is not short because the internal value of the cell are the asterisks.
What could be happening?
Thanks!

Hi Ruby,
please refer to some very basic documentation on CRM 2007 Webclient UI or the IC Webclient of CRM 4.0.
What you are trying to do is create a value node and your code ABAP is wrong.
Here a code sample. Typed it by hand so there might be errors in it.
data:
ls_struct type /mystructure,
lr_struct_ref type ref to data,
lr_node type ref to cl_bsp_wd_value_node.
ls_struc-/attribute1/ = 'Hallo Welt'.
get reference of ls_struct into lr_struct_ref.
create object lr_node
exporting iv_data_ref = lr_struct_ref.
typed_context->/yourNode/->collection_wrapper->add( lr_node ).
cheers Carsten

Why does he search in the user settings for the printer?

Hi, I created a smartform and added output and control options when the form is called.
I read that if I assign tddest and tdprinter, and leave user_settings blank, that SAP would not go to the user settings to see if a standard printer was declared.
But apparently, the program still goes to the user settings, as I keep getting the error: "Please maintain an output device in the user master data."
Now I know that I can go to SU01 and create a standard printer, but that is not what I want. I want to pass the printer in the program, so that there is no need to have a standard printer defined.
What am I missing?
I have these options:
      output_options-tdimmed = 'X'.
      output_options-tddest = v_printer_name.
      output_options-tdprinter = v_printer_name.
      output_options-tdcopies = 1. "Just print one copy
      control_parameters-no_dialog = 'X'.
and in the call function
call function FM_NAME
EXPORTING
    control_parameters = control_parameters
    output_options     = output_options
    user_settings      = ' '
THX!

hi,
try this.
output_options-tdimmed = 'X'.
output_options-tddest = v_printer_name. <---- pass output device(4 char)
output_options-tdprinter = v_printer_name.<------remove this
output_options-tdcopies = 1. "Just print one copy
control_parameters-no_dialog = 'X'.
Regards
Madhu

User Settings for BEX Analyzer - Max number of values displayed

Hi Experts,
we are trying to change the Maximum number of values that get displayed from 1000 by default to some other number.
the setting windows that I refer to above can be reach by this path.
When you open up a Query in Analyzer, you are prompted to Variable Entry screen, if you click on the select on the list box next to a field (double squre boxes) then on the next pop windown that opens on the top right there is settings button (guy's face and box) this should bring you to User setting window, here go to Value Restrictions tab, you will see 1000 selected under No. of Displayed values....we want this number to be different by default for ALL Users.
What is the t-code or path to change this number in BW.

Hi,
its standard to have 1000 rows in sap BW 7.0. We can't change the default standard setting.
Thanks,
venkat

User settings for displaying numeric values

Similar Messages

Maybe you are looking for