User Settings Reset

Hello!
Tonight, I noticed that all of a sudden my menu bar had reset itself to "transparent…"
After a restart, I noticed that ALL my user settings had reset to Apple base defaults — default dock, default appearance settings, etc. I tried a second restart, but nothing changed.
Suggestions?

HI Daniel,
Might be a good time to boot from your install disk and check the start up disk.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. Make sure there is always 10% free disk space. Not enough disk space can cause directory corruption.
Carolyn
Message was edited by: Carolyn Samit

Similar Messages

  • User settings reset and locked out of user folders ! How do I retreive?

    Hi everyone,
    I'm sure a number of people here on the forums have come across the problem with the blue tint that appears every now and then. It usually appears when connecting an external monitor after the you come back from the screen saver.
    Yesterday it happened for the first time without an external monitor connected. I have found a number of sites that have suggested using the command 'sudo chmod 664 *' within the Terminal. I have used it a couple of times to fix this problem but it did not work hence the reason it happened yesterday without a monitor connected. When I did use this command previously I first entered
    cd /library/colorsync/profiles/display
    When i did it for this occassion i forgot to enter the display folder first.
    After this I did a restart and all my user settings were reset and I was locked out of all my user folders. I lost all my desktop settings and everything was back to when I first started my computer.
    I did some hunting and found the command 'sudo chmod 777'. I tried this then did a reset and my desktop background returned and the folders were unlocked.
    What I want to know is if this is the correct command to bring everything back to normal?
    My user permissions in terminal are listed below
    Using the command sudo chmod 664 *
    drw-rw-r--+ 15 JoeBros staff 510 11 Jun 23:33 Desktop
    drw-rw-r--+ 19 JoeBros staff 646 22 May 20:44 Documents
    drw-rw-r--+ 46 JoeBros staff 1564 25 Jun 15:08 Downloads
    drw-rw-r--+ 45 JoeBros staff 1530 10 Jun 23:56 Library
    drw-rw-r--+ 4 JoeBros staff 136 1 Apr 19:19 Movies
    drw-rw-r--+ 38 JoeBros staff 1292 4 Apr 18:08 Music
    -rw-rw-r-- 1 JoeBros staff 92352512 29 May 18:20 Parallels-Desktop-5600-Mac-en.dmg
    drw-rw-r--+ 57 JoeBros staff 1938 25 Jun 16:02 Pictures
    drw-rw-r--+ 6 JoeBros staff 204 14 Jun 15:56 Public
    drw-rw-r--+ 5 JoeBros staff 170 26 Mar 00:59 Sites
    This is what is displayed after sudo chmod 777
    total 180376
    drwxrwxrwx+ 15 JoeBros staff 510 11 Jun 23:33 Desktop
    drwxrwxrwx+ 19 JoeBros staff 646 22 May 20:44 Documents
    drwxrwxrwx+ 46 JoeBros staff 1564 25 Jun 15:08 Downloads
    drwxrwxrwx+ 45 JoeBros staff 1530 10 Jun 23:56 Library
    drwxrwxrwx+ 4 JoeBros staff 136 1 Apr 19:19 Movies
    drwxrwxrwx+ 38 JoeBros staff 1292 4 Apr 18:08 Music
    -rwxrwxrwx 1 JoeBros staff 92352512 29 May 18:20 Parallels-Desktop-5600-Mac-en.dmg
    drwxrwxrwx+ 57 JoeBros staff 1938 25 Jun 16:02 Pictures
    drwxrwxrwx+ 6 JoeBros staff 204 14 Jun 15:56 Public
    drwxrwxrwx+ 5 JoeBros staff 170 26 Mar 00:59 Sites
    Does this look correct ??
    Any help would be great thanks

    I assume this access is open to everyone when I connecto any wireless network
    No necessarily, it depends whether you just changed your home folders and nothing else.
    But just your home folders present a problems as they should have extended attributes which are now removed. More on that later.
    Using one chmod to a directory affects all equally, though the files may have individually different permissions.
    I don't know how extensively you have altered the modes permissions, but from what you have shown in your first post your Home folders are incorrect.
    For your home folder, which is the default location when you start Terminal, and I dont think you have strayed from there, all the listings, except Parallels are folders, prefaced with the letter d. for folder.
    On my machine, for example, the pattern for the home folders all show
    drwx------@ 5 xxxxxx staff 170 25 Jun 06:07 Desktop
    normally that would be chmod 700 Desktop which will get you
    drwx------
    but note the @ which shows an extended attribute or ACL in Leopard.
    to write the ACL shown as @
    You will need to read
    man chmod about ACL MANIPULATION OPTIONS
    Personally, I think that playing around with chmod without a backup was not a good idea, and I wonder if your ambition has exceeded your knowledge. Sorry if that sounds tough, but a possible Archive and Install may be your safest path I think because what you have messed with was no small oops with a simple fix.
    You could just change those home folders to chmod 700 and see how it goes without the attribute, or bite the bullet and do an Archive and Install.
    I do not run parallels and so have no idea what is permissions should be.
    That Time capsule is starting to look pretty good now
    Message was edited by: roam2
    Message was edited by: roam2

  • User Settings reset upon restart! everytime!

    I just bought a MBP several weeks ago and I am very happy with it , BUT , after a recent software update everytime my computer shuts down or I restart it completly resets my dock and every user setting I applied almost like a fresh system restore. None of my HD files are missing but none of my configurations are saved. Something im missing? thanks for your help.

    sorry for flaming my own thread.. but i cant shut off my computer or it will completly rease the hour or so of work I put into personalizing everything on my Mac. Im not usuing any bogus buggy software or anything , just normal user configs.. but everytime it shuts down , restarts.. I have a fresh user interface and nothing is saved! its getting to be a pain , so if you read this please.. let me know if you can help.

  • Windows 2012 RDP "resets" user settings while using Roaming Profiles

    Last month we installed a RDP environment running a Windows 2012 DC and 2 Windows 2012 RDP servers. The RDP servers are running in a pool.
    For the rest it's nothing fancy.
    The problem is that user-settings are reset, most likely during logon. This only occurs when we use Roaming Profiles.
    - We create a new user, in a container with no GPO's attached.
    - This user gets a RP while logging on, no errors, at logoff the RP is written to it's correct folder.
    - Logging on again. Now for example I make Chrome standard browser and change the program which opens JPG files.
    - Logging off
    - I check the NTUSER.DAT in the RP folder and the changes I made can be found in the file. So it has been saved to the NTUSER.DAT.
    - Now I login again and check the settings I made. IE is standard browser again and the JPG setting is also back to standard.
    - Logging off
    - Checking the NTUSER.DAT in the RP folder and yes, everything is back to default.
    Now the funny part is, when I create a user with a local profile, everything is working properly. Settings been saved.
    It doesn't make a different what kind of user it is. Domain User, Domain Admin. They all have the same problems when using RP's.
    No error messages in the Event Viewer.
    I'm clearly unable to solve this problem. Hoping someone can help me on this one.
    What makes the settings reset at logon while using Roaming Profiles?
    Thanks!

    Hi,
    Thank you for posting in Windows Server Forum.
    Have you enable Cache copies option of roaming profiles?
    This issue might occurs because the User Profile service does not load the terminal server roaming profile correctly after the user account password is reset.
    When the Delete cache copies of roaming profiles Group Policy setting is enabled, and when a user is prompted to change the user account password, the User Profile service loads a local temporary user profile. The User Profile service loads this user profile
    to perform the password reset operation. However, the profile changes to a combination of the local temporary profile and of the roaming profile after the user password is reset. Therefore, the terminal server roaming profile is not loaded correctly.
    In addition, please try to delete the SID of the user from registry key and check the result. You can follow the below path.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    More information:
    You receive a "The User Profile Service failed the logon” error message
    http://support.microsoft.com/kb/947215/en-us
    Also check “User Profiles on Windows Server 2008 R2 Remote Desktop Services” article.
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Reset Ovi Store User Settings

    I wonder if there's a workaround to delete the Ovi Store user settings (a specific folder maybe)? I tried to uninstall and reinstall Ovi Store but my settings do not get deleted (ie. my username is still stored).
    Thanks for your help 

    @deadprincess
    Unfortunately upon N8 at least irrespective of whether device "hard reset" or firmware re-flashed the username of the first user continues to popup requesting confirmation!
    Happy to have helped forum with a Support Ratio = 42.5

  • Reset ALV User settings

    Hi,
    I have defined an ALV dynamicly. When I add a new column to the ALV it is not displayed. Doing right click and going to 'user settings' I see that the column is added to 'Hide column'. Changing this manually shows that the new column is presented in the ALV.
    This only happend if I had once clicked the user settings and did some things and SAVED. So somewhere my user settings are stored.
    My question:
    - How can I reset my ALV user settings in webdynpro  in a way that new defined columns are directly presented ?
    - Where are these ALV user settings stored ?
    Hope you can help.
    Cheers, John

    HI John,
    As sarbjeeth suggested, get the variant(personalisation info) details from the WD application wd_analyze_config_user.
    Run this application and search for the variants of the component SALV_WD_TABLE(ALv component), identify your variant and note the details like config name,config variant, config type etc.
    Then in the WDDOINIT , you can try deleting like this.
    DATA lo_api_controller TYPE REF TO if_wd_controller.
      DATA lo_pers_manager   TYPE REF TO if_wd_personalization.
      data lv_variants       type WDR_PERS_VARIANTS.
      data lv_config_key     type WDY_CONFIG_KEY.
      data lv_bool           type wdy_boolean.
    *   get personalization manager
      lo_api_controller = wd_this->wd_get_api( ).
      lo_pers_manager = lo_api_controller->get_personalization_manager( ).
    lv_config_key-CONFIG_ID = '29A71D1A8C9565ED7315B87A8CC21C94'. "These details are got from     the wd_analyze_config_user application
    lv_config_key-CONFIG_TYPE = 07.
    lv_config_key-CONFIG_VAR = 'ENX0N9'.
    CALL METHOD lo_pers_manager->delete
      EXPORTING
    *    scope                     = 1
        config_key                = lv_config_key
    *    transport_personalization =
    *    trkorr                    =
      receiving
        success                   = lv_bool.
    Thanks,
    Aditya.

  • After restart, all user settings are gone and reset to defaults

    Hi after waking up my iMac from sleep today, it appeared something had gone wrong (apps not responding…notification that my external drives had "not been ejected correctly" etc). I restarted. After restart, and logging back in to my regular user account, all user settings were missing and reset to factory defaults: Desktop reset to the "wave", Dock reset, Download folder missing (grey question mark), Dropbox unable to connect, Safari bookmarks missing (but still on my iPhone-- so it's a local iMac problem, not an issue with iCloud), small things like mouse scrolling prefs reset etc.
    Basically all of my user preferences are missing. I've seen a number of threads about how to fix some of these items individually, but seems like there is a single corrupt preference file somewhere maybe?
    I've repaired permissions a few times (there were a lot), and restarted but nothing has fixed it yet.
    I had been logged out of iCloud, but once I logged back in, my Mail came back (just my me.com account-- still missing my Gmail, will need to reset I guess), along with Calendar and Contacts-- those are ok.
    I keep all my files on an external LaCie RAID, and that all appears to be fine. Folders all intact etc.
    Suggestions?
    Thanks for your help!

    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - Mavericks
    Safe Mode - About
    Try running this program when in your old account and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • 55WX800U Power On/Off Resets Comcast User Settings to 4:3 and 480p

    When the TV is powered off, when it is turned back on the Comcast box (Motorola DCX3400) user settings gets reset to 4:3 aspect ratio and 480p display resolution. I go back through the Comcast user settings menu and set to 16:9 aspect and Native or 1080i resolution... and if the TV is turned off it will reset it everytime.
    I've tried everything under the sun. If there is a setting, I've tried changing it. I also have a Denon AVR-1911 A/V Receiver. Regardless of whether the HDMI cable to the TV is routed through the receiver or direct to the TV, the same thing happens everytime. I've tried every possible combination of of enabling/disabling CEC control/RegazaLink in the TV and receiver as well. I also updated the TV firmware via USB with what is currently posted on this site. The update did go through successfully. I've also tried every combination of the order in which devices power on/off.
    So I currently have to redo the user setting setup every single time I turn on the TV. It's annoying to put it mildly. Please help.

    I dont see this. I have the devices (except the receiver).

  • Querying user settings

    Hi,
    After quite a bit of experience developing ASP gadgets for version 4.5, we've recently moved to Plumtree version 5 and .Net.
    One thing we would like to be able to do is provide a web service for use by other applications (outside the portal) which could request the retrieval of a specific User setting for a given user.
    I've seen some examples of similar challenges, but still a bit bewildered how to go about this (on the Plumtree side of things, the actual process of building our own web service is fine).
    The web service will be built with .Net & WSE, on a server with the Plumtree EDK installed. I've checked and our Plumtree installation also has the PTAPI QueryInterfaceAPI web service available.
    Should I use a PRC session, and impersonate the user I need to get the settings for, or will setting up a session as an admin user be sufficient to query the User settings object for another user?
    Any help offered would be gratefully received.
    Thanks,
    Charles

    Sorry - I'm a doofus. I didn't read your post completely.
    You're right - if you want to attach to this service w/o going through Plumtree/BEA first to obtain a login ID you'd need to impersonate a user (I'd suggest a secured admin account where the credentials are encrypted).
    Try this... (server API)
    In your web.config
    <appSettings> <add key="UserID" value="administrator" /> <add key="UserPassword" value="" /></appSettings>
    Encrypt these or do something to protect them.
    Read: How to use the ASP.NET utility to encrypt credentials and session state connection strings
    http://support.microsoft.com/default.aspx?scid=kb;en-us;329290
    Code Sample for Password Reset (Similar thing)
    '//create an admin connection Dim ptAdminSession As IPTSession = New Session 'PortalObjectsFactory.CreateSession ptAdminSession.Connect("administrator", "", Nothing) '//reference web.config values instead
    Dim sNewPassword As String = ""
    '//start user impersonation Dim ptUserSessionTemp As IPTSession = ptAdminSession.ImpersonateUser(iUserID)
    '//get the user's email address Dim sEmail As String = "" sEmail = ptUserSessionTemp.GetUserInfo.GetEmail
    If sEmail.Length > 0 Then '//open the user for editing Dim oUser As IPTUser = ptAdminSession.GetUsers().Open(iUserID, True)
    '//reset the password oUser.SetPassword(sNewPassword)
    '//mungle with server context - don't ask why we do this after we have a handle on the object - I don't know '//there's likely a very good reason for it, I'm sure Dim mySC As IPTServerContext = oUser.GetInterfaces("IPTServerContext") mySC.Store() mySC.UnlockObject()
    '//send email
    Else '//throw an exception here - return "no email address"
    End If

  • ColdFusion Builder 3 Settings Reset on Restart

    I've downloaded the ColdFusion Builder 3 trial and am experiencing some odd and very annoying behavior.
    I've customized some code editor text font and color settings. I've added an entry to the CF Servers panel for an instance of ColdFusion 10 running inside a VMWare virtual server on my laptop.
    When I restart Eclipse, all the code customizations I've made are reverted back to the default install settings and the entry in my CF Servers panel is gone.
    I've been an IntelliJ user for well over a year, but in doing much more cfscript-based development the CF Plugin for IntelliJ is proving to be a hindrance so I thought I'd give CFB 3 a try and see if there were any improvements over CFB 2. However, I can't take this kind of behavior. Hopefully someone can give me a setting or someone else has seen this before and can give me an idea of where to start looking.
    I have CF Builder installed as a plugin into Eclipse Kepler 64-bit for Mac. I added the CF Builder update site and have updated to CF Builder 3.0.0.290000. I also previously installed as the standalone version with no additional plugins and experienced the same behavior.
    Anyone have any ideas?
    Thanks,
    Dan

    Milan...
    My apologies for taking so long to get back to this. I just did some testing tonight of your instructions as well as those by Kaif above.
    Firstly, I installed ColdFusion 10 locally on my Mac. I added the local server to the CF Servers panel successfully. After restarting Eclipse, the localhost entry remained in the CF Server panel.
    Secondly, I followed your instructions to make a new profile and make my font/coloring customizations in it. I restarted Eclipse and my font and color selections were maintained (through 3 restarts). I noted that my newly created profile was selected in Preferences after each restart.
    I then added a remote CF 10 server to the CF Servers panel successfully (as noted by the panel telling me that the server was running and being able to launch the CF Admin from within Eclipse). At this point there were 2 entries in my CF Server panel--localhost and the one remote server that lives inside my VM. I restarted Eclipse and when it came back up, only the localhost server remained. I might add that the VM has ColdFusion 10 installed in "multi-instance" mode and that the remote server instance that I added to the CF Servers panel was one of 4 CF instances configured and running inside the VM.
    All the while, my font and color customizations have remained the way I set them.
    So, it appears as though we're down to just one bug relating to remote server registrations in the CF Servers panel.
    I saw that another user was reporting something similar in this thread: ColdFusion Builder 3 RDS and Remove Server settings reset on each restart so apparently it's not just me.
    Thanks to you and everyone else for all the ideas and troubleshooting help thus far. At least at this point I think I might be able to use this for day-to-day coding, even though I really want the remote server system to work correctly so I can use the step debugger feature again.
    Dan

  • User Settings and System Settings

    Which settings are stored at the user level and which settings are stored at the system level? I asked Apple support if it was possible to reset all Mavericks settings to default and retain my apps and data. They suggested I create a new user and transfer my personal files over. I expected this to start with all the settings at default, but I've found that the Network and Energy Saver settings remained the same. What other settings are not set to default when a new user is created?
    Also, Apple failed to mention that the new user would have to take ownership of the old user's files. I'm wondering if the command below was the proper way to do so:
    sudo find / -user oldusername -exec chown newusername {};

    All system-level settings are stored in /Lbrary/Preferences/, including the hidden .GlobalPreferences.plist file.
    Can't help with the Unix command, but seriously doubt their advice. Why would you want to create a new user? The normal way to reset user settings is to remove the plist files stored in /username/Library/Preferences/.

  • User settings effecting menus

    I cannot access my fonts menu. The drop down menu is blank box and snaps shut. I also have trouble with "save as" and file format...ie save as jpg...the drop down quickly snaps shut, I can often catch it after several tries but seriously lol.
    These issues have something to do with user settings...I made a secondary account and the program works fine but changing between accounts is not the best solution. Anyone have a clue where/what I need to look at in user settings ?

    Two thoughts:
    When the Font tool is selected, click on the small triangle at the far left of the Options Bar and select "Reset tool".  If that doesn't solve it,
    The old user account obviously had "some things" corrupted in it.  In cases like this, because there could be a gazillion things wrong with the old account, it's standard procedure to continue using the new user account and transfer the user settings, documents, pictures, etc., for the applications to that new account.  That's a royal PITA, but can be done.  I had to do that a few years ago when running Vista, and Microsoft tech support helped me on that.
    Ken

  • Photosmart C5280 Photo user settings problems

    I reset my user settings on my Photosmart C5280 printer and now cant print photos at all help and thanks.  I changed the automatic settings to try and print a 3x5 unsuccessfully.  Now I  can't print at all.  How do I get them back to the settins the printer came with. 
    Also, are there online classes to teach me how to use the photosmart functions?

    Hi,
    You might try resetting the printer, this should set it back to factory settings.   HEre is the link to the document on how to do this:
    Performing a power reset
    Let me know if this helps or not
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • Importing User settings from one CC user into another

    Hi There,
    I want to import user settings from one account, then use those as a base to setup user setting for another. IE I want to use my settings from work [which I did not pay for] and use that as a starting point for my personal user account at my home office [which I did pay for].
    I'm concerned about messing up my work settings + at home I'm on a laptop, not a 2 display tower.
    Specificaly, its the custom keyboard, sequence and output, and loging colums/metadata display settings that I'd love not to have to setup from scratch, again.
    Also, I have co workers who prefer my settings and I'd like to share these with them- but don't want them to be signed in as me, and messing me up accidentaly.
    Many Thanks
    David

    OK so this does not work. I'm running CC, on OSX 10.8.3.
    For those that don't know, in order to reveal the library folder in OSX 10.7+, you need to either enter this into terminal:
    Permanent Reveal:
    chflags nohidden ~/Library/
    Permanent Hide:
    chflags hidden ~/Library
    Or hold down option key + finder/go, for temporary reveal.
    So after doing this, and coying over the directories Jax mentioned [+ '7.0' folders, as I'm in CC], I'm still not getting the keyboard mappings, just the defaults.
    I've just synced with my work account, and brought up another issue: My scratch disks and media paths are all different on my home office, and I don't want to have to reset those everytime I switch from one location to another.
    If I could get what Jax sudgested to work, that would be an exelent work arround for this situation. Otherwise its a feature request for managing syncing between multiple accounts...
    Thanks again Jax for tyring to help

  • Takes up to 5 min "Applying User Settings" with events ID 6005 6006 after a reboot - Win Server 2008 R2 Standard 64bit

    Hi,
    Has anybody seen the issue below showing in the logs? The time for the logs messages switch from the real time (17:57) to some random time (10:55). There seem to be a disconnect with the time. I noticed right when the status message while logging in switches
    to "apply user settings", the time get screwed up on the gpsvc.log file and switches to the random time (10:55) and keeps reporting that random time till "apply user settings" process completes and switches back to regular real time (17:57).
    I made sure the server is synced up with w32tm /resync command. Tried different DNS settings. Tried dis joining and rejoining to the domain. tried to block inheritance on GPMC to that OU. Created new domain user. Deleted local profiles. All with no luck and
    same behavior which is taking up to 5 min "applying user setting" only after a reboot. If I log in and out without reboot, it would log in just fine within seconds.
    Any thoughts or suggestions are appreciated!
    Thanks,
    Here is a copy from the gpsvc.log:
    GPSVC(338.354) 17:57:08:406 -------------------------------------------
    GPSVC(338.354) 17:57:08:406 Use the Event Viewer to analyze the Group Policy operational log for details on Group Policy service activity.
    GPSVC(338.354) 17:57:08:406 -------------------------------------------
    GPSVC(338.354) 17:57:08:406  
    GPSVC(338.354) 17:57:08:406 InitializeProductType: Product Type: 2
    GPSVC(338.354) 17:57:08:406 Register for connectivity notification is Enabled.
    GPSVC(338.354) 17:57:08:406 Connectivity manager class initialized with for IntranetAuth connectivity
    GPSVC(338.354) 17:57:08:640 Target = Machine
    GPSVC(338.350) 17:57:08:640 Target = Machine, ChangeNumber 0
    GPSVC(338.39c) 17:57:09:232 bMachine = 1 
    GPSVC(338.39c) 17:57:09:232 Setting GPsession state = 1
    GPSVC(338.27c) 17:57:09:232 Waiting for connectivity before applying policies
    GPSVC(338.27c) 17:57:09:232 Waiting for SamSs with timeout 8264
    GPSVC(338.39c) 17:57:09:232 Message Status = <Applying computer settings...>
    GPSVC(338.39c) 17:57:09:232 Target = Machine
    GPSVC(338.39c) 17:57:09:232 Target = Machine, ChangeNumber 0
    GPSVC(338.39c) 17:57:09:248 Setting GPsession state = 1
    GPSVC(338.27c) 17:57:09:357 Waiting for NTDS.IndexRecreateEvent with timeout 8139
    GPSVC(338.27c) 17:57:09:357 Waiting for NlaSvc with timeout 8139
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 1
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:576 Sid = (null)
    GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:576 UnLocked successfully
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:576 Sid = (null)
    GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:576 UnLocked successfully
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:576 Sid = (null)
    GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:576 UnLocked successfully
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:576 Sid = (null)
    GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:576 UnLocked successfully
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:576 Sid = (null)
    GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:576 UnLocked successfully
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:576 Sid = (null)
    GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:576 UnLocked successfully
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:576 Sid = (null)
    GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:576 UnLocked successfully
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:576 Sid = (null)
    GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:576 UnLocked successfully
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:576 Sid = (null)
    GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:576 UnLocked successfully
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:576 Sid = (null)
    GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:576 UnLocked successfully
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:576 Sid = (null)
    GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:576 UnLocked successfully
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:576 Sid = (null)
    GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:576 UnLocked successfully
    GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:576 Async Lock called
    GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:576 Sid = (null)
    GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:591 UnLocked successfully
    GPSVC(338.350) 17:57:09:591 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:591 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:591 Async Lock called
    GPSVC(338.350) 17:57:09:591 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:591 Sid = (null)
    GPSVC(338.350) 17:57:09:591 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:591 UnLocked successfully
    GPSVC(338.350) 17:57:09:591 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:591 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:591 Async Lock called
    GPSVC(338.350) 17:57:09:591 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:591 Sid = (null)
    GPSVC(338.350) 17:57:09:591 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:591 UnLocked successfully
    GPSVC(338.350) 17:57:09:591 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:591 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:591 Async Lock called
    GPSVC(338.350) 17:57:09:591 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:591 Sid = (null)
    GPSVC(338.350) 17:57:09:591 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:591 UnLocked successfully
    GPSVC(338.350) 17:57:09:591 Sid = (null), dwTimeout = 1, dwFlags = 268435459
    GPSVC(338.350) 17:57:09:591 LockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:591 Async Lock called
    GPSVC(338.350) 17:57:09:591 Reader Lock got immediately. m_cReadersInLock : 2
    GPSVC(338.350) 17:57:09:591 Sid = (null)
    GPSVC(338.350) 17:57:09:591 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:591 UnLocked successfully
    GPSVC(338.350) 17:57:09:669 Sid = (null)
    GPSVC(338.350) 17:57:09:669 UnLockPolicySection called for user <Machine>
    GPSVC(338.350) 17:57:09:669 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.350) 17:57:09:669 Setting lock state as notLocked
    GPSVC(338.350) 17:57:09:669 UnLocked successfully
    GPSVC(338.27c) 10:55:29:426 Waiting for NETLOGON with timeout 6392
    GPSVC(338.27c) 10:55:29:426 Waiting for MUP with timeout 6392
    GPSVC(338.27c) 10:55:29:426 Waiting for wkssvc to signal MUP event
    GPSVC(338.5bc) 10:55:29:519 Target = Machine
    GPSVC(338.5bc) 10:55:29:519 Target = Machine, ChangeNumber 0
    GPSVC(3b0.67c) 10:55:29:535 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x16c
    GPSVC(3b0.67c) 10:55:29:535 Client_InitialRegisterForNotification: User = machine, changenumber = 0
    GPSVC(338.5bc) 10:55:29:535 Target = Machine
    GPSVC(3b0.67c) 10:55:29:535 Client_RegisterForNotification: User = machine, changenumber = 0
    GPSVC(3b0.67c) 10:55:29:535 CGPNotify::RegisterForNotification: Exiting with status = 0
    GPSVC(338.6c4) 10:55:29:535 Target = Machine
    GPSVC(338.5b0) 10:55:29:535 Target = Machine, ChangeNumber 0
    GPSVC(338.5b0) 10:55:29:535 Sid = (null), dwTimeout = 600000, dwFlags = 268435456
    GPSVC(338.5b0) 10:55:29:535 LockPolicySection called for user <Machine>
    GPSVC(338.5b0) 10:55:29:535 Async Lock called
    GPSVC(338.5b0) 10:55:29:535 Reader Lock got immediately. m_cReadersInLock : 1
    GPSVC(338.5bc) 10:55:29:535 Sid = (null)
    GPSVC(338.5bc) 10:55:29:535 UnLockPolicySection called for user <Machine>
    GPSVC(338.5bc) 10:55:29:535 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.5bc) 10:55:29:535 Setting lock state as notLocked
    GPSVC(338.5bc) 10:55:29:535 UnLocked successfully
    GPSVC(338.754) 10:55:29:816 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xc18
    GPSVC(338.754) 10:55:29:816 Client_InitialRegisterForNotification: User = machine, changenumber = 0
    GPSVC(338.350) 10:55:29:816 Target = Machine
    GPSVC(338.754) 10:55:29:816 Client_RegisterForNotification: User = machine, changenumber = 0
    GPSVC(338.754) 10:55:29:816 CGPNotify::RegisterForNotification: Exiting with status = 0
    GPSVC(338.27c) 10:55:29:987 Done waiting for MUP
    GPSVC(338.27c) 10:55:29:987 Waiting for DS with timeout 5830
    GPSVC(338.27c) 10:55:29:987 Registered for NLA notification successfully
    GPSVC(338.27c) 10:55:29:987 NlaGetIntranetCapability returned Not Ready error. Consider it as NOT intranet capable.
    GPSVC(338.27c) 10:55:29:987 There is no connectivity. Waiting for connectivity again...
    GPSVC(338.27c) 10:55:30:455 There is connectivity.
    GPSVC(338.27c) 10:55:30:455 We have network connectivity... proceeding to apply policy.
    GPSVC(338.27c) 10:55:30:455 NlaQueryNetSignatures returned 1 networks
    GPSVC(338.27c) 10:55:30:455 Found a intranet+auth network
    GPSVC(338.27c) 10:55:30:455 # of interfaces : 1
    GPSVC(338.27c) 10:55:30:455 Interface ID: {9538E3E7-197E-4A34-82B6-F457DC25D35D}
    GPSVC(338.27c) 10:55:30:455 Compartment ID: 1
    GPSVC(338.27c) 10:55:30:455 Setting the CompartmentId [1] on the current thread
    GPSVC(338.27c) 10:55:30:455 GetDomainControllerConnectionInfo: Enabling bandwidth estimate.
    GPSVC(338.27c) 10:55:30:502 Started bandwidth estimation successfully
    GPSVC(338.27c) 10:55:30:502 GetDomainControllerConnectionInfo: Getting Ldap Handles.
    GPSVC(338.27c) 10:55:30:502 GetLdapHandle:  Getting ldap handle for host: DC-MLIB.DOMAIN-NAME in domain: DOMAIN-NAME.
    GPSVC(338.27c) 10:55:30:502 GetLdapHandle:  Server connection established.
    GPSVC(338.27c) 10:55:30:502 GetLdapHandle:  Binding using only kerberos.
    GPSVC(338.27c) 10:55:30:518 GetLdapHandle:  Bound successfully.
    GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\dskquota.dll.
    GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for gptext.dll.
    GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
    GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
    GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for gptext.dll.
    GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
    GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for gptext.dll.
    GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for gptext.dll.
    GPSVC(338.27c) 10:55:30:518 ProcessGPOs:  No site name defined.  Skipping site policy.
    GPSVC(338.27c) 10:55:30:518 GetGPOInfo:  ********************************
    GPSVC(338.27c) 10:55:30:518 GetGPOInfo:  Entering...
    GPSVC(338.27c) 10:55:30:533 GetMachineToken:  Looping for authentication again.
    GPSVC(338.27c) 10:55:30:580 GetMachineToken:  Looping for authentication again.
    GPSVC(338.27c) 10:55:30:596 GetMachineToken:  InitializeSecurityContext failed with 0x80090324
    GPSVC(338.27c) 10:55:30:596 GetGPOInfo:  Failed to get the machine token with  -2146893020
    GPSVC(338.27c) 10:55:30:596 GetGPOInfo:  Leaving with 0
    GPSVC(338.27c) 10:55:30:596 GetGPOInfo:  ********************************
    GPSVC(338.27c) 10:55:30:596 ProcessGPOs: GetGPOInfo failed.
    GPSVC(338.27c) 10:55:30:596 ProcessGPOs: No WMI logging done in this policy cycle.
    GPSVC(338.27c) 10:55:30:596 ProcessGPOs: Processing failed with error -2146893020.
    GPSVC(338.27c) 10:55:30:596 ProcessGPOs: Boot/Logon Policy processing - checking if UBPM trigger events need to be fired
    GPSVC(338.27c) 10:55:30:596 CheckAndFireGPTriggerEvent: Fired Policy present UBPM trigger event for Machine.
    GPSVC(338.27c) 10:55:30:596 Application complete with bConnectivityFailure = 0.
    GPSVC(338.27c) 10:55:30:596 Application complete with bConnectivityFailure = 0.
    GPSVC(338.4d0) 10:55:32:281 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xd94
    GPSVC(338.4d0) 10:55:32:281 Client_InitialRegisterForNotification: User = machine, changenumber = 0
    GPSVC(338.4f0) 10:55:32:281 Target = Machine
    GPSVC(338.4d0) 10:55:32:281 Client_RegisterForNotification: User = machine, changenumber = 0
    GPSVC(338.4d0) 10:55:32:281 CGPNotify::RegisterForNotification: Exiting with status = 0
    GPSVC(338.384) 10:55:32:281 Target = Machine, ChangeNumber 0
    GPSVC(338.384) 10:55:35:900 SID = S-1-5-21-1599696121-1964574698-334091239-301107
    GPSVC(338.384) 10:55:35:900 bMachine = 0 
    GPSVC(338.384) 10:55:35:900 Setting GPsession state = 1
    GPSVC(338.384) 10:55:35:900 Message Status = <Applying user settings...>
    GPSVC(338.6c4) 10:55:35:900 Setting GPsession state = 1
    GPSVC(338.718) 10:55:35:900 StartTime For network wait: 11200ms
    GPSVC(338.718) 10:55:35:900 Current Time: 19546ms
    GPSVC(338.718) 10:55:35:900 MaxTimeToWaitForNetwork: 7034ms
    GPSVC(338.718) 10:55:35:900 TimeRemainingToWaitForNetwork: 0ms
    GPSVC(338.718) 10:55:35:900 UserPolicy: Waiting for machine policy wait for network event with timeout 0 ms
    GPSVC(338.718) 10:55:35:915 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 65538
    GPSVC(338.718) 10:55:35:915 LockPolicySection called for user <Machine>
    GPSVC(338.718) 10:55:35:915 Sync Lock Called
    GPSVC(338.718) 10:55:35:915 Reader Lock got immediately. m_cReadersInLock : 1
    GPSVC(338.718) 10:55:35:915 Lock taken successfully
    GPSVC(338.718) 10:55:35:915 UnLockPolicySection called for user <Machine>
    GPSVC(338.718) 10:55:35:915 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(338.718) 10:55:35:915 Setting lock state as notLocked
    GPSVC(338.718) 10:55:35:915 UnLocked successfully
    GPSVC(338.718) 10:55:35:915 GetDomainControllerConnectionInfo: Enabling bandwidth estimate.
    GPSVC(338.718) 10:55:36:430 Started bandwidth estimation successfully
    GPSVC(338.718) 10:55:36:430 GetDomainControllerConnectionInfo: Getting Ldap Handles.
    GPSVC(338.718) 10:55:36:430 GetLdapHandle:  Getting ldap handle for host: DC-MLIB.DOMAIN-NAME in domain: DOMAIN-NAME.
    GPSVC(338.718) 10:55:36:430 GetLdapHandle:  Server connection established.
    GPSVC(338.718) 10:55:36:430 GetLdapHandle:  Bound successfully.
    GPSVC(338.718) 10:55:36:430 ProcessGPOs: Computer's domain is same as user's domain so using user's domain DC
    GPSVC(338.718) 10:55:36:430 GetLdapHandle:  Getting ldap handle for host: DC-MLIB.DOMAIN-NAME in domain: <Unspecified>.
    GPSVC(338.718) 10:55:36:430 GetLdapHandle:  Server connection established.
    GPSVC(338.718) 10:55:36:446 GetLdapHandle:  Bound successfully.
    GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\dskquota.dll.
    GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for gptext.dll.
    GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
    GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
    GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for gptext.dll.
    GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
    GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for gptext.dll.
    GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for gptext.dll.
    GPSVC(338.718) 10:55:36:446 ProcessGPOs:  No site name defined.  Skipping site policy.
    GPSVC(338.718) 10:55:36:446 GetGPOInfo:  ********************************
    GPSVC(338.718) 10:55:36:446 GetGPOInfo:  Entering...
    GPSVC(338.718) 10:55:36:446 SearchDSObject:  Searching <OU=People,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 10:55:36:446 SearchDSObject:  Found GPO(s):  < >
    GPSVC(338.718) 10:55:36:446 SearchDSObject:  Searching <DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 10:55:36:446 SearchDSObject:  Found GPO(s):  <[LDAP://CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=ad,DC=*****,DC=****;0]>
    GPSVC(338.718) 10:55:36:446 ProcessGPO:  ==============================
    GPSVC(338.718) 10:55:36:446 ProcessGPO:  Deferring search for <LDAP://CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 10:55:36:446 EvaluateDeferredGPOs:  Searching for GPOs in cn=policies,cn=system,DC=ad,DC=*****,DC=****
    GPSVC(338.718) 10:55:36:446 ProcessGPO:  ==============================
    GPSVC(338.718) 10:55:36:446 ProcessGPO:  Searching <CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 10:55:36:446 ProcessGPO:  User has access to this GPO.
    GPSVC(338.718) 10:55:36:446 ProcessGPO:  GPO passes the filter check.
    GPSVC(338.718) 10:55:36:446 ProcessGPO:  Found functionality version of:  2
    GPSVC(338.718) 10:55:36:446 ProcessGPO:  Found file system path of:  <\\DOMAIN-NAME\sysvol\DOMAIN-NAME\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}>
    GPSVC(418.430) 17:59:09:821 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x3dc
    GPSVC(418.430) 17:59:09:821 Client_InitialRegisterForNotification: User = machine, changenumber = 0
    GPSVC(338.6b8) 17:59:09:821 Target = Machine
    GPSVC(418.430) 17:59:09:821 Client_RegisterForNotification: User = machine, changenumber = 0
    GPSVC(418.430) 17:59:09:821 CGPNotify::RegisterForNotification: Exiting with status = 0
    GPSVC(338.30c) 17:59:09:821 Target = Machine, ChangeNumber 0
    GPSVC(418.430) 17:59:09:837 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x448
    GPSVC(418.430) 17:59:09:837 Client_InitialRegisterForNotification: User = machine, changenumber = 0
    GPSVC(338.30c) 17:59:09:837 Target = Machine
    GPSVC(418.430) 17:59:09:837 Client_RegisterForNotification: User = machine, changenumber = 0
    GPSVC(418.430) 17:59:09:837 CGPNotify::RegisterForNotification: Exiting with status = 0
    GPSVC(338.6b8) 17:59:09:837 Target = Machine, ChangeNumber 0
    GPSVC(3b0.3c0) 17:59:11:085 CGPNotify::UnregisterNotification: Entering with event 0x16c
    GPSVC(3b0.3c0) 17:59:11:085 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
    GPSVC(3b0.3c0) 17:59:11:085 CGPNotify::UnregisterNotification: Canceling pending calls
    GPSVC(3b0.3c0) 17:59:11:288 Client_CompleteNotificationCall: failed with 0x71a
    GPSVC(3b0.3c0) 17:59:11:288 CGPNotify::UnregisterNotification: Cancelled pending calls
    GPSVC(3b0.3c0) 17:59:11:288 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
    GPSVC(338.30c) 17:59:12:380 Target = Machine
    GPSVC(338.30c) 17:59:12:380 Target = Machine, ChangeNumber 0
    GPSVC(338.30c) 17:59:13:051 Target = Machine
    GPSVC(338.30c) 17:59:13:051 Target = Machine, ChangeNumber 0
    GPSVC(338.30c) 17:59:13:285 Target = Machine
    GPSVC(338.30c) 17:59:13:285 Target = Machine, ChangeNumber 0
    GPSVC(338.5a0) 17:59:14:143 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xf04
    GPSVC(338.5a0) 17:59:14:143 Client_InitialRegisterForNotification: User = machine, changenumber = 0
    GPSVC(338.6b8) 17:59:14:143 Target = Machine
    GPSVC(338.5a0) 17:59:14:143 Client_RegisterForNotification: User = machine, changenumber = 0
    GPSVC(338.5a0) 17:59:14:143 CGPNotify::RegisterForNotification: Exiting with status = 0
    GPSVC(204.228) 17:59:59:897 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xb50
    GPSVC(204.228) 17:59:59:897 Client_InitialRegisterForNotification: User = machine, changenumber = 0
    GPSVC(338.6b8) 17:59:59:897 Target = Machine
    GPSVC(204.228) 17:59:59:897 Client_RegisterForNotification: User = machine, changenumber = 0
    GPSVC(204.228) 17:59:59:897 CGPNotify::RegisterForNotification: Exiting with status = 0
    GPSVC(338.718) 18:01:58:941 ProcessGPO:  Found common name of:  <{31B2F340-016D-11D2-945F-00C04FB984F9}>
    GPSVC(338.718) 18:01:58:941 ProcessGPO:  Found display name of:  <Default Domain Policy>
    GPSVC(338.718) 18:01:58:941 ProcessGPO:  Found user version of:  GPC is 1, GPT is 1
    GPSVC(338.718) 18:01:58:941 ProcessGPO:  Found flags of:  0
    GPSVC(338.718) 18:01:58:941 ProcessGPO:  Found extensions:  [{3060E8D0-7020-11D2-842D-00C04FA372D4}{3060E8CE-7020-11D2-842D-00C04FA372D4}]
    GPSVC(338.718) 18:01:58:941 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:58:941 ProcessLocalGPO:  Local GPO's gpt.ini is not accessible, assuming default state.
    GPSVC(338.718) 18:01:58:941 ProcessLocalGPO:  GPO Local Group Policy doesn't contain any data since the version number is 0.  It will be skipped.
    GPSVC(338.718) 18:01:58:941 GetGPOInfo:  Leaving with 1
    GPSVC(338.718) 18:01:58:941 GetGPOInfo:  ********************************
    GPSVC(338.718) 18:01:58:941 GetGPOInfo:  ********************************
    GPSVC(338.718) 18:01:58:941 GetGPOInfo:  Entering...
    GPSVC(338.718) 18:01:59:097 SearchDSObject:  Searching <OU=FM-Security Video Servers,OU=FM-Servers,OU=FM,OU=Department OUs,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:097 SearchDSObject:  Found GPO(s):  <[LDAP://cn={B957D759-2AF4-4592-95B8-5B7C62F9B340},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0]>
    GPSVC(338.718) 18:01:59:097 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={B957D759-2AF4-4592-95B8-5B7C62F9B340},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 SearchDSObject:  Searching <OU=FM-Servers,OU=FM,OU=Department OUs,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 SearchDSObject:  Found GPO(s):  <[LDAP://cn={E8A9990E-57AD-4B7B-BAE4-C56E20FB6314},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={251254DD-27DC-419F-816D-C51CDB309D8F},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0]>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={E8A9990E-57AD-4B7B-BAE4-C56E20FB6314},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={251254DD-27DC-419F-816D-C51CDB309D8F},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 SearchDSObject:  Searching <OU=FM,OU=Department OUs,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 SearchDSObject:  Found GPO(s):  <[LDAP://cn={1A42DA26-38F9-491C-940B-9D37895BE92A},cn=policies,cn=system,DC=ad,DC=*****,DC=****;1][LDAP://cn={F3D0434D-3EFF-4713-908C-3D8AB8189FB9},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={F03FA73B-A5B5-496B-94E5-5315D1D8F5F3},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={386C2C68-BB18-483B-AF36-92E76C1178D2},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={3D83F7A1-D4C2-4F8E-8808-CD5415D5A91E},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={462C2912-2318-4F46-A082-8BCC07EBDA29},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={7690B141-A1C2-4381-BD63-1AF5C09B4456},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={62C29217-3E25-42FC-8469-78312109323E},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={E795AC88-A750-45AF-870C-7EEDF00AA64A},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={B7C7410F-A3C0-4F12-8C3A-245C317EDFBA},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={CE1F85C1-DF2D-4E34-898B-2D6E3D0B55BE},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={D1B4C3BE-41CD-41B2-8A26-BE2EFD6953D0},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={E2673882-F33C-4879-AE75-583829D8BDA8},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={074DE127-4DBA-43F2-9C19-5953AD76CE9F},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={F4BAB9C5-0B6E-426B-93D3-1950A7002DC7},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={4A2C73AF-509F-4434-AF58-1AB3888959B4},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0]>
    GPSVC(338.718) 18:01:59:113 SearchDSObject:  The link to GPO LDAP://cn={1A42DA26-38F9-491C-940B-9D37895BE92A},cn=policies,cn=system,DC=ad,DC=*****,DC=**** is disabled.  It will be skipped for processing.
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={F3D0434D-3EFF-4713-908C-3D8AB8189FB9},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={F03FA73B-A5B5-496B-94E5-5315D1D8F5F3},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={386C2C68-BB18-483B-AF36-92E76C1178D2},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={3D83F7A1-D4C2-4F8E-8808-CD5415D5A91E},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={462C2912-2318-4F46-A082-8BCC07EBDA29},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={7690B141-A1C2-4381-BD63-1AF5C09B4456},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={62C29217-3E25-42FC-8469-78312109323E},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={E795AC88-A750-45AF-870C-7EEDF00AA64A},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={B7C7410F-A3C0-4F12-8C3A-245C317EDFBA},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={CE1F85C1-DF2D-4E34-898B-2D6E3D0B55BE},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={D1B4C3BE-41CD-41B2-8A26-BE2EFD6953D0},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={E2673882-F33C-4879-AE75-583829D8BDA8},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={074DE127-4DBA-43F2-9C19-5953AD76CE9F},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={F4BAB9C5-0B6E-426B-93D3-1950A7002DC7},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  ==============================
    GPSVC(338.718) 18:01:59:113 ProcessGPO:  Deferring search for <LDAP://cn={4A2C73AF-509F-4434-AF58-1AB3888959B4},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 SearchDSObject:  Searching <OU=Department OUs,DC=ad,DC=*****,DC=****>
    GPSVC(338.718) 18:01:59:113 SearchDSObject:  No GPO(s) for this object.
    GPSVC(338.718) 18:01:59:113 SearchDSObject:  Searching <DC=ad,DC=*****,DC=****>

    > GPSVC(338.350) 17:57:09:669 UnLocked successfully
    > GPSVC(338.27c) 10:55:29:426 Waiting for NETLOGON with timeout 6392
    The numbers in parenthesis are PID.TID of gpsvc.exe. So we see a thread
    change, and this usually indicates that a different logon process has
    begun. Could you try to map this log entries to events in the group
    policy event log?
    But to be honest: No, I've never seen such a behavior in gpsvc.log :(
    I'm almost sure that a service is responsible, but how to identify it -
    I don't know. There's no auditing for system time changes, AFAIK.
    Greetings/Grüße,
    Martin
    Mal ein
    gutes Buch über GPOs lesen?
    Good or bad GPOs? - my blog…
    And if IT bothers me -
    coke bottle design refreshment (-:

Maybe you are looking for

  • Can not print report when using HTML or DHTML

    Can not print report when using HTML or DHTML. When I open the report and click the print icon I get a small blank dialog box and then nothing. If I change to activex it works and I can print. Any Ideas? Thanks Jeff

  • Airplay problem with 2012 MacbookPro w/ Mountain Lion

    I have a 2012 MacbookPro that I recently purchased. I also just bought the AppleTV 3. I upgraded to the Mountain Lion last week and initially the airplay icon showed up in the menu bar, as well as the display in system preferences and I was able to m

  • Shipments/ Delivery Document tracking with Purchase Order

    Dear all, Please help me in finding all the shipments accessed against Purchase order or Delivery document information with the help of Purchase order. Is it possible to track either of them using PO? Please help.... Thanks & Regards, Deepthi.

  • Query taking too long in HTMLDB page

    Hi, I have a tricky issue. I have a Query using HTMLDB_ITEM in a page. There are 2 queries joined using UNION clause. The Query runs perfectly fine in TOAD or sqlplus with same paramaters. But in HTMLDB it takes about 3-4 minutes to to show the page.

  • PM archive maintenance plan data

    Hi all, I try to archive maintenance plan by use t-code sara - select archive object PM_MPLAN - select maintenance plan for archive and run will shown message "no maintenance plan was selected" please help me to solve this problem, Thanks