User-Specific Configuration for different named search role

We need different user specific layout settings for each user. i have duplicated catalog user role for each user and maintained specific named search for that particular user in constraint. but when we want to configure specific layout for individual user. its not showing that catalog user in the catalog config UI for the layout configuration. please advice. if it shows that specific user then we would configure each specific user layout with individual look and feel ( like shopping lists, search fields, images, etc., ). thanks for your inputs.

Answered

Similar Messages

  • Are iPads built with different configurations for different countries?

    Are iPads built with different configurations for different countries?

    deebeeque wrote:
    I live in the U.S. but am moving to Brazil. I would like to purchase an iPad here in the U.S. but want to have it set up for Brazil, ie: language, operation, WiFi. Can all of this be done by selecting the country specific configuration at the setup stage?
    You can certainly chose the language when you set it up. WiFi is an international standard, no difference between US and Brazil. You can further go into Settings - General - International and select language, as well as keyboards and region format.
    Also, Is it possible to order the iPad (to be shipped to me in the U.S.) with packaging material (ie: operation manual, etc.) in the Brazilian Portuguese language?
    There is no operation manual included - English, Portuguese, or any other language. You can find the one you need at http://support.apple.com/pt_BR/manuals/.
    Additionally, does Brazil have 4G?
    I'm not sure, but as of now the only countries where the iPad 4G will work are the US and Canada - other countries that have 4G use different frequencies.

  • No Logged on Office Users are configured for IRM

    Setup:
    AD RMS on 2012 configured with https Crypto 1
    Exchange 2010 SP3 RU6
    Office 2013
    I can open OWA and use IRM to protect a document but any Office application I open and try to protect gives me an error like this:
    No Logged on Office Users are configured for Information Rights Management (IRM).
    I have googled and taken a look at all of the options out there and everything seems to be configured correctly.
    Any ideas or other troubleshooting tips I can do???

    Hi JerHiggs123,
    It seems that this is a known bug. 
    Please try the following fix:
    Open regedit
    Go to HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\Identity\Identities\[email protected]
    Delete the registry key “SignedOut”=dword:00000001
    If there is no such key, add it as name "SignedOut", type of REG_DWORD and value of "00000001"
    Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

  • User specific settings for message ME161

    All SAP Gurus,
    Is it possible to have user specific settings for message like ME161?
    We want the message ME161 to be displayed as warning message to one user and the same message to be displayed as an erorr message to another user.
    Is it possible?
    Regards,

    hi,
    In addition to the above data:
    Messages are defined like this:
    Version     AG      No.      Text     TYPE
    Normally, in std case,
    Version will be always 00 for system defined messages....
    Now if you wanna make the the same message as authorised,
    then copy this exsisting message....
    While copying system will ask for version, here enter it it Z*
    Now on the other hand make the other settings for user/user grp in SU01 and here set the user parameter as MSV(THIS IS MUST)....
    and then try...
    Regards
    Priyanka.P

  • Can CTI OS agent desktop 9 be configured for different desktop modes?

    Can CTIOS agent desktop be configured for different modes e.g. Normal, open, on top, stealth or agent selectable?

    Yes, but you'll have to customize it and recompile it. The source code is in the installer.
    david

  • How can I have user specific filters for information display on portlet?

    Hello Everyone !!!!!
    I am new to the Portlet World
    My query is..
    How can I have filters on a portlet screen ?
    I want to display certain information on a portlet which must be filtered and ordered.
    Example:
    In Internet Banking , I want to display transfers which had happened in the last month. So I ( as a user ) will keep this predefined somewhere may be in portletData.
    Whenever that user logs in for the next time, he will be able to view account transfers taken place in the lastest month only.
    This must be user specific. As another user can keep the setting in a different way. That is he/she might want to view account transfers for the last week only.
    When user clicks on a button a new screen( filter screen ) is loaded where he need to enter the dates of From and To .....
    The user saves this.....( may be in portletdata)
    So that when he logs in .. next time screen loads with the defined settings in filter....
    Any idea ? How can this be achieived ?
    Thanks in advance.... :-)
    Wating for a reply
    Message was edited by:
    dev2007

    Hey !!!
    Can anybody give me some idea regarding this ?

  • User Specific Layout for KSB1

    Hi Gurus,
    User has created a variant for KSB1 report and its saved as user specific variant automatically.  Now he want to change this as global in order to access for other users but user specific check box not able to deactivate as its greyed out(not modifialbe). Attached screen shot for clarity on the issue. Please share your inputs on from where this tab is controlling?
    Thanks in Advance

    Hi Jyothi,
    You can create a new standard layout with name starting with /. If user specific check box is grayed out and selected by default, then that user may not have proper authorization to create standard ALV layouts. Please ask your BASIS team to give required authorization.
    Thanks,
    V V

  • How to set user specific Layout for executing IW38/IW39  report.

    Dear Experts,
    We have 10 users seperatly, For executing IW38/39 transaction they have maintained seperate layouts for executing the reports. While saving layout they have saved the layout as 'user specific' Now some body has chage the settings.
    After changing the setting all are getting same layout.
    Please suggest how to set user specific layout. When user enter the IW38/39 report by default he should get his layout.
    Thanks in advance.

    Create Variant using SHD0 and with Group and assign to particular user's
    Here is the steps
    Creating a Variant Group
    1. Open transaction SHD0, enter the transaction code, and press enter.
    2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
    3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
    Assigning Users
    Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
    1. Return to the Standard Variants tab page, Variant Groups sub tab page.
    2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
    3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
    You can use this procedure of user assignment for all other users that you want to add to the variant group
    Hope this helps.
    Thanks
    S.N

  • User specific setting for SSM_CUST table

    Dear experts,
    i know it is not a right forum for post this thread but i am not able find to right forum for such problem
    My problem is that i disable favorites by adding parameter ALLOW_TCODE_START in SSM_CUST table
    and it disble all the user to add tcode in favorites but i want user specific that i (administrator) am able to add tcode
    in favorites but my client(subuser) not able to add tcode in favorites in sap easy acess .is it possible
    please help.......................

    Please anyone give some suggetion on it
    i m in great problem
    please help............

  • User specific CalcRuleDefltDlvCrDt for VL10A transaction

    Hi All,
    In VL10 transaction, currently the default CalcRuleDefltDlvCrDt is coming as 2 (Today and Tomorrow). This default value comes from Profile and scenario.
    I have checked all the exisitn profiles and created a new profile with the value for CalcRuleDefltDlvCrDt as 4.
    But I am not able to default this value for a pertucular user.
    Kindly let me know the procedure so that for a perticular user ID the vale of CalcRuleDefltDlvCrDt should be 4 ( due till tomorrow).
    Please let me know if I have to create new scenario and if yes then let me know how to create a scenario.
    Thanks in Advance.
    Abhay

    Hi,
      No there is no user specific selection of shop paper available.You will have to develop something custom using the implicit enhancement functionality if you require the same.
    Regards
    Narasimhan

  • WebForms - Can i make the form user specific. For example can i identify the user who clicked on the link of webform?

    For example can i identify the user who clicked on the link of webform? Because i have a list of users and every time individual needs to select their name.?

    Hi,
    Unfortunately, it is not possible to create a user specific form in  FormsCentral, It is not possible to identify the users who has visited the link.
    Regards,
    Nakul

  • User specific authorisation for VA01/VA02/VA03 transaction

    Hi Friends,
    I have specific requirement i.e for eg Sales order created by one user id say X should not be viewd by other user id Y and only user Id X can change his Sales order and vice versa.
    Is there any standard solution for this requirement. Please let me know your valuable feed back.
    Regards
    JP

    Hi,
    Ask your basis consultant to resrict user wise authorization for that transaction codes
    We can restrict user wise for it.
    Give both user ids and transaction codes to your basis person and try for it.
    Regards
    Kiran

  • Move User Specific Configuration to New PC

    Hello All,
    I am preparing a new PC for a user that has changed a lot of the default settings in Word and Excel (i.e. fonts, sizes, templates, etc.) I would like to know how to move this specific information over from the old pc?  Is it all stored in the registry
    or a configuration file.  The only thing I can find is for 2003 there was a save settings wizard, we are using 2010 and she has 2010 on her old pc as well.
    Any information is greatly appreciated.
    Thanks!

    I dont think you can move the settings as most of them are stored in registry keys and in binary format.
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Configuring for different GR/IR accounts for WRX T/E Key

    Hi ,
    I am in a strange situation. I have to configure the automatic postings for MM, in transaction event key WRX. for the rule Valuation class activated, with following example of settings
    Chart of Accounts -- INT
    Transaction key -- WRX
    Valuation Class G/L Account
    ------  191000
    3000 191100
    3200 191101
    4000 191200
    I Created a PO without material master with a material group say 007(services) to which valuation class 3200 is assigned in "Entry Aids Without material Master" in IMG.
    When i do the MIGO for this PO, following entries happen
    Cost center Db
    191000 Cr (this account belongs to blank valuation class and not 3200)
    now my question is Why the system is taking the blank valuation class for this posting and not valuation class 3200 when i have mentioned valuation class 3200 against the materials group mentioned in the PO
    Thanks a lot in advance
    Regards
    Jayesh

    There are more than 100 discussions already exist in SCN about why system is taking G/L account (WRX transaction event key) which is assigned with blank valuation class for that PO which hasn't any material master (Service PO).
    You have pointed the "Entry Aids Without material Master" in IMG, However this is different. Read the document  Automatic Account Determination for without material master.
    Here you will find how the IMG path works.

  • Changing user's configurations for all users

    Hi.
    My users connect to SBO (2007) from a Termainal Server. Now I want to set them all new settings (such as Language, Company Name).
    Is there a way to have a batch update for all the users or must I change every user's profile manually?
    Beni.

    Hi
    Please try the following                                                                               
    - Open the file C:\Documents and Settings\%user%\Local                 
    Settings\Application Data\SAP\SAP Business One                         
    - Please select the file b1-current-user.xml. Do a click with the mouse
    right button and select "Notepad" to edit the file.                    
    - Search the following code                                            
    <leaf kind=single name= Language  type= String >                       
                    <value>1<                                                                               
    Change the value the range is 1 to 25 (1 should be the current one, spanish is 25, for example).
    I hope that helps!
    Paulo Calado
    SAP Business One Forums Team

Maybe you are looking for