User specific material and plant auth for report MB52

Hello Experts,
Actually my client required the following thing that a User must have auth to view certain materilas for certain plant in report MB52. How to restrict it.
Kindly reply ASAP.
Thanks and Regards
Naveen Chawla

Hello experts,
Waitng for reply...
regards
Naveen

Similar Messages

  • User Exit to check whether chapter id for Material and Plant combination is maintained while creating sales order

    Hello all,
    my requirement is, system should give error message while creating sales order, if chapter ID is not maintained for a material and plant combination.
    please suggest the user exit.

    Hi
    CASE 1 : All Plants are excisable.
    In Material master , Foreign Trade data tab-  mentioned Control code field mandatory. ( i.e nothing but Chapter ID)
    CASE 2 : Few Plants are excisable
    In the Case 2 you need to go for Enhancement
    Program Name : MV45AFZB 
    User Exit:            USEREXIT_CHECK_VBAP ( Item Level Check )
    By using above user exit you write a logic with the help of ABAPer
    Plant and Chapter ID combination table : J_1IMTCHID

  • Functional location for the respective material and equipment in a report

    i want to show the functional location for the respective material and equipment in a report designed for plant maintenace module..how should i add a field in the report which already contains the order , material and equipment no ?..just have to add a field  functional location in that report. Can anyone plzz tellme from which table should i fetch the data .?

    From EQUI get the recent/valid EQUZ record.
    From EQUZ get the ILOA record.
    ILOA holds the TPLNR for the equipment.
    And from ILOA you can get IFLOT.
    edit: just noticed you can use V_EQUI as well.
    Edited by: Maen Anachronos on Nov 26, 2010 12:40 PM

  • Outbound delivery allows only the unrestricted stock for particular material and plant

    Hi,
    In STO I have an problem the outbound delivery creations allows all stocks under unrestricted, Quality inspection, Block stock.
    I want the outbound delivery creation of a particular material and  plant it allows only the stock under the unrestricted only. It doesn't allows the stocks under the Quality inspection and Block stocks.
    I need to know how to configure this or how to solve my requirements.
    Regards,
    Ramesh N

    Dear Mohammed ,
    as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
    as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
    follow the below logic to achieve your issue .
    you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
    wait for other experts solution , if any standard is possible or not  .
    Regards,
    C.B Reddy.

  • Plannning Material and Plant for MRP Run

    Hi,
    If I have a material (01) extended on 2 plants, on one plant (A) we have production and planning/MRP + stock and on the other one (B), just stocking and transfer. B's requirements are to be entered and planned at A. I also want stock at B to be considered with stock at A when MRP runs at A. In the material master, I have some settings. I want to know if these would be any good:
    Material 01 on Plant A:
    MRP PD
    Strategy 40
    Lot size EX
    Coverage profile applied
    Material 01 on Plant B:
    MRP ND/PD tried both
    Strategy 40
    Lot size EX
    Coverage profile applied (same)
    Planning material: Material 01 itself
    Planning plant: Plant A
    I particularly want to know about points 5 and 6. Will they make any difference if I run MRP on scope of planning(all plants) or just plant A? Will stock at B be considered? What difference does that setting make in my case? Please help!
    Thanks!

    No sales on Plant A. Only transfers and STO's. Stock is STO'd to Plant B (and other Plants, as well)
    Plant B sells the stock.
    Yes, I want to load the forecast in Plant A (COPA to SOP to DM to MRP). What do I do in this case?
    I tried another case, as well. In that I put a special procurement on the material in Plant B view and marked it as external procurement. (the planning material and plant were there, didn't remove)
    Then I entered the forecast in both plants separately (PIRs for both Plants) The requirements from Plant B made STPO Planned orders in Plant B and STCK Planned orders in Plant A. I am using coverage profiles (period is month, standard length 25 days, target 10 days for 1st period for 2 months, target 10 days for 2nd period  for 1 month, target 10 days for the rest of the horizon) Not using any consumption modes.
    The results I am getting don't make sense to me. I have attached screen shots for both plants MD04 and the MRP + work scheduling views

  • Characteristics values for material and plant

    Hi Experts,
    I need to fetch characterstic values from a class Y-xx . I belive badi BAPI_CLASS_GET_characteristics
    will give the result but my problem is in selection screen I am passing material no and plant
    for this material and plant i need to fetch the characteristics values from the Y_xx class
    Could any one suggest the BADI or FM or tables to fetch the results
    Thanks in advance

    Hi,
    Go to MEK2, here enter the freight condition type, go to the output screen as pr the access maintained and select the line item and click on "Scales" button to see the from and to value.
    Also you can check the same in "Conditions" button in Purchase Info record.

  • Characteristic values for the material and plant combination...

    Hi Friends,
    I would like to know how can we maintain the characteristic values for the combination of Material and Plant though the material is not batch managed?
    Thanks in advance,
    Ram

    Hi Rajendra,
    Thanks for quick reply. I am maintaining under classification view but it does not ask plant any where. So the value will be same across all the plants but i want to maintain characteristic values separately under each plant for same material.
    Regards,
    Ram

  • Transaction code to display exception messages by material and plant

    Hi,
    Is there a transaction code or standard report in SAP  to display exception messages by material and plant? I see the exception messages by individual material and plant in MD04 but I need to see a collective view. I tried Collective access in MD04 and MD46 but they are not giving me exception groups but I need exceptions listed out by material and plant.
    Thanks.

    Visu,
    I have never seen such a report.
    MD06 does support fine tuning the output display, once the list has been generated.  If you use this feature, the resulting display is the entire list as created by selecting the initial parameters (such as exception group), but with the specific items that contain your selected message highlighted.  If you are addressing the messages interactively, you can select the review (glasses)  screens, and scroll through just the ones which contain your  selected exception message(s).
    To try this, execute MD06.  Select the groups as necessary.  Execute.  Wait for the list.  Now, immediately, select 'search' (binoculars).  Experiment with the output.
    As mentioned in the previous post, if MD06 does not meet your needs, you will need to have a custom report written.
    Rgds,
    DB49

  • Need help on enhancement of 0CO_OM_OPA_1 with Material and Plant

    Hi,
    I have a requirement that need to build a BW report which shows Actual costs and Planned Costs of Service Orders. We are getting Actual costs from 0CO_OM_OPA_6 and now i am getting planned costs from 0CO_OM_OPA_1. For actual costs we are getting Service Orders, Material and plant from Satandard DS 0CO_OM_OPA_6. Where as For Planned Costs standard data source 0CO_OM_OPA_1 is not having Material and Plant information. For this we decided to enhance 0CO_OM_OPA_1 with Material and Plant.
    But we are not sure the source tables for material and plant and the logic to extract these data from the tables. Can anybody please help me out.
    Thanks for your supprt in advance.

    It's possible you may need to use a CO-PA (profitability analysis) datasource instead of 0CO_OM_OPA_6.  0CO_OM_OPA_6 extracts data from CO tables. 
    Based on the path you provided "...Profit. segment...", the requested data might exist with CO-PA.
    If you determine the required data resides in CO-PA, you'll have to create a datasource based on the operating concern.  You can perform a search within the online docs for steps to create this datasource.
    Hope this helps.
    Rod

  • Auto To working for one material and not working for other material

    Hi,
    Hope everybody is doing fine.
    I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
    I didn't setup the back ground processing job. Is that is affecting it?
    thanks for any help.
    regrads,
    KHAN

    Thnaks,
    You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
    Appreciate your time charlie

  • Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ...

    Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s), 0 warning(s) ERROR: DW050: The following payload errors were found during install: ERROR: DW050:  - Microsoft Visual C++ 2010 Redistributable Package (x64): Install failed ERROR: DW050:  - Microsoft Visual C++ 2010 Redistributable Package (x86): Install failed -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s), 0 warning(s) ERROR: DW050: The following payload errors were found during install: ERROR: DW050:  - Microsoft Visual C++ 2010 Redistributable Package (x64): Install failed ERROR: DW050:  - Microsoft Visual C++ 2010 Redistributable Package (x86): Install failed
    PS CS6，Please help！

    Errors "Exit Code: 6," "Exit Code: 7"
    Mylenium

  • How to get material and plant by providing control key as input ?

    How to get the material and plant info based on control key values using a function module?
    kindly help..

    Hi,
    Check the FM
    K_VALID_PLANTS_OF_MATERIAL.
    Sandeep Kaushik

  • How to ceate a new Country key,currency ,version and value type for report

    hi,
    can you please let me know How to ceate a new Country key,currency ,version and value type for report
    along with tables and tcodes.
    thanking you

    Not clear on your comments
    How to ceate a new Country key,currency,
       version and value type for report
    because in one line you are saying you want to create Country Key, which means your requirement is in some transaction whereas at the end, you say for report.
    Can you let us know you want to develop a report and if so, from which transactions, you want to take datas.  You have to be clear on this.
    thanks
    G. Lakshmipathi

  • Need to Update SELECTION TEXT and text symbols for report J_1IEWT_CERT.

    Hello Experts,
    My requirement is need to "Update SELECTION TEXT and text symbols for report J_1IEWT_CERT".
    1. As I want to change text sysmbols for 006 to "Run in preview mode". Currently it showing "Type of output". Issue I am facing here is that whenever I deleting aur changing the same it throws an error : "Text symbol 006 is an original text and cannot b
    deleted or renamed".  How can I do the same.
    2. Secondly I have to add two selection text also i.e. ZFATHER and PREV . And delete two selection text i.e. P_PDF and
    P_SCRIPT. In this Tab there is only a Icon of deleting not an Addition button .So How can I add two more selection text.
    Above are Manual Activities which is written in note 1486147. We already taken an acess key and it shows in editable mode but
    not able to add/deletin/modify selection text and text symbols.
    Please provide the solution as it is critical requirement.
    Reagrds,
    Supriya Bhatt.

    Hi Vishal Saxena,
    Just go through the screens and do it .
    [<li> Link1|http://4.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqL9rnvI/AAAAAAAAEs4/fPG7IG9yGK4/s1600-h/3-716953.JPG]
    [<li> Link2|http://1.bp.blogspot.com/_O5f8iAlgdNQ/SjoVp3d9uEI/AAAAAAAAEso/ZxfkeNAiOZQ/s1600-h/1-715669.JPG]
    [<li> Link3|http://2.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqIbpNpI/AAAAAAAAEsw/2ntYgX-i1Dc/s1600-h/2-716353.JPG]
    Thanks
    Venkat.O

  • Mac-specific drivers and other software for Windows

    Mac-specific drivers and other software for Windows how can I download them with out the install cd?

    Or for the same price you can order a new Snow Leopard disk. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
    That would give you Boot Camp 3.0 drivers. With Snow Leopard and Boot Camp 3.0 you can install Windows XP, Vista or Windows 7. With Lion and Boot Camp 4.0 you can only install Windows 7. If you install Lion with Boot Camp 3 and XP or Vista already on it it will work.

Maybe you are looking for