User SSO not found in NTLM directory

i wanted to Provision a user .
But when i am searching his SSO not able to find it in any Directory in Shared Services.

Hello Jagdish,
Sorry for late replying was away for while
The user is in active directory.

Similar Messages

User ID not found in credentials / Sun Access Manager integration.

Hi all,
I've got SSO mostly working between AM 7.1 and IDM 7.1.0.
However, if the IM user I'm attempting to log in as is a user in an organization, rather than just being a member of 'Top' in IM, then the login fails (eg, load of /idm/user/login.jsp), with the error message "User ID not found in credentials".
Users who have an AM realm resource account and are in the Top organization work just fine; users further down the tree don't.
I'm trying to trace through the IM source (reverse engineered) and so forth, but not having much luck. Before I raise a support case on this, has anyone else seen this problem?
Thanks,
Michael.

The answer, if anyone is experiencing the same problem, is that it turned out to be the identity policy established for the users, which had "enforce password policy on login"; an exception was thrown, "Too few user supplied questions provided and answered based on the configured minimum of 5"; this was caught somehow and rethrown as "An account ID must be specified"; this was further recaught and rethrown as "User ID not found in credentials".
Highly confusing.

User Was Not Found when trying to run SSRS report!

I'm trying to run SSRS report (Custom Reports) for Dynamics CRM 2011. However, when I try to run the report from the Reporting Manager it errors out "User Was Not Found"!
Here's the complete error log:'
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DSMain'. (rsErrorExecutingCommand)
Microsoft.Crm.CrmException: An unexpected error occurred. System.ServiceModel.FaultException`1[[Microsoft.Xrm.Sdk.OrganizationServiceFault, Microsoft.Xrm.Sdk, Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]:
User Was Not Found <OrganizationServiceFault xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/xrm/2011/Contracts"> <ErrorCode>-2147220969</ErrorCode> <ErrorDetails xmlns:d2p1="http://schemas.datacontract.org/2004/07/System.Collections.Generic">
<KeyValuePairOfstringanyType> <d2p1:key>CallStack</d2p1:key> <d2p1:value xmlns:d4p1="http://www.w3.org/2001/XMLSchema" i:type="d4p1:string"> at Microsoft.Crm.ServerLocatorService.GetCrmUserId(Guid organizationId,
String authenticationInfo) at Microsoft.Crm.Sandbox.SandboxHostSids.IsCallerAllowed(SandboxSdkContext requestContext, String& expectedSidSddlForm, String& callerSidSddlForm) at Microsoft.Crm.Sandbox.SandboxSdkListener.AuthenticateCaller(SandboxCallInfo
callInfo, SandboxSdkContext requestContext, String operation) at Microsoft.Crm.Sandbox.SandboxSdkListener.Execute(SandboxCallInfo callInfo, SandboxSdkContext requestContext, String operation, Byte[] serializedRequest)</d2p1:value> </KeyValuePairOfstringanyType>
</ErrorDetails> <Message>User Was Not Found</Message> <Timestamp>2014-05-09T21:37:02.5487525Z</Timestamp> <InnerFault i:nil="true" /> <TraceText i:nil="true" /> </OrganizationServiceFault>
An unexpected error occurred.
User Was Not Found

Hello,
Can you preview the report in Report Builder or Report Designer?
Based on the error message, the issue may related to a invalid user account for the report data source credentials.Please verify the user account is valid and has sufficient permission to access CRM data source.
You can refer to the following blog to troubleshooting CRM custom report rsProcessingAborted error:
http://blog.simpletrees.com/2013/04/mscrm-and-dreaded-rsprocessingaborted.html
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

User OblixAnonymous not found

Hi All
I am getting a message in the log that "User OblixAnonymous not found" when I tried to track the user self registration .
What went wrong and why this user is not found ?
Thanks

try to create user in OIM which user login is "OblixAnonymous". error because, may you are using OAM for authentication where UID=OblixAnonymous
check below link
http://onlineappsdba.com/index.php/2010/10/28/oracle-access-manager-operation-errorform-based-access-for-unprotected-resource/
--nayan

Ever since v25 when I try to log into my Merrill Lynch Account I get user ID not found. Works OK in iE and Chrome

When I try to log into my account I get back a message stating User ID not found. I have 1) Cleared all cookies, cache, history etc.. 2) Run as administrator 3) renamed cookies-sprite 4) rebooted
I am currently using Windows 7 Home Premium SP1, Firefox 26

Did you try Safe Mode?
*https://support.mozilla.org/kb/Safe+Mode
In case you use the Firefox Password Manager then try to disable saving passwords and also saved form data in case that is interfering.
Remove these check marks as a test:
*Tools > Options > Security: Passwords: "Remember passwords for sites"
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": "Remember search and form history"

Sudo: user: command not found

Hi there,
I'm struggling with this sudo problem.
All i've been doing with terminal was logging into another account on my iMac and running an application, so i write sudo disk (disk is username for the other account)
then i enter password and path to the application
i've been doing this for past 3-4 month every day, bet since yesterday after entering pasword i get this error - sudo: user: command not found
Any help here would be appreciated!
Thank you

which sudo returns: /usr/bin/sudo
i used First Aid to verify disk permissions 3 times.. repaired them, but it keeps giving me the same errors every time i hit Verify Disk Permissions..
List of errors:
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r-- .
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95.
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95.
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Home/lib/security/cacerts", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/JavaPluginCocoa.bundle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions verification complete
Are these pretty bad errors? Are these causing sudo not to work?

Problems with Active Directory Users showing as not found in Open Directory work group manager

I’m running a golden triangle setup with Open directory assigning group policy and authentication provide by active directory. In workgroup manager I can search through the AD and add users or computers to groups in OD workgroup manager. However when I save and refresh the users or computer appear as ‘not found’. Is there a reason for this?

Hi Zero
It's very reassuring to know im not the only one having issues with this..
Im on my second re install of the server.. I like you have no wish to do another clean install as everything else is connected and it seems like the answer is probably very simple.
So today im going to re- run the terminal commands as layed out in the online guides.
However i was kinda hoping someone would be able to supply us with an answer.
thanks
J

Users "redlined" - "Not Found in User Directory"

We've been having this problem off and on all day:
In my User list under Admin page on Contribute, half of the
users have a red slash across their ID and in paranthesis this
message "Not Found in User Directory". The odd things are that 1)
they are in AD and active accounts, 2) using CPS console we can
verify the names and passwords and 3) those using C4 can log in
just fine. Those using C3 and CS3 seem to be having log-in problems
- except that I'm running CS3 and administering site, and I can log
in just fine..
Any ideas?

Have you tried using the Transition Mode (Edit, Adminster
Websites, Compatibility) for all your users, since you are working
with two versions of Contribute?
grtz
Hayo

Exception write to event log when user not found in active directory

I'm trying to use a exception to write to a event log to show which user did not get imported from my csv file. Any help to write this exception is appreciated. Thanks
Import-CSV $importfile | ForEach-Object{
$samaccountname = $_.sAMAccountName.ToLower() #samaccountname on csv file
Try {
$exists = Get-ADUser -LDAPFilter "(sAMAccountName=$samaccountname)" #Filter user by samaccountname
Catch
write-host "Users did not exist." #user does not exisit

To your question:
"How can I create a new event log every time without saving to the original event log textfile?"
The answer provided by Mike Laughlin doesn't require you save anything to a text file - so either I'm misunderstanding this follow-up, or you are misunderstanding Mike's post. :)
To answer your other follow up... try:
$goodCount = 0
$badCount = 0
Import-Csv $importFile | ForEach {
$SamAccountName = $_.SamAccountName
try {
$user = Get-ADUser -Identity $SamAccountName -ErrorAction Stop
$goodCount++
} catch {
Write-EventLog # <-finish this command however you want
$badCount++
write-host "Users imported: $goodCount"
write-host "Users not imported: $badCount"
G. Samuel Hays, MCT, MCSE 2012, MCITP: Enterprise Admin
Blog:gsamuelhays.blogspot.com
twitter:twitter.com/gsamuelhays

Interface Mapping Not Found in Integration Directory

Hey guys!
I'am getting this error in the test configuration part of the integration directory:
"Interface Mapping: <Not Found> com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping"
I don't see why I should be getting this error since I have properly defined a message and interface mapping for the receiving interface.
BTW, I get this error when I use XSLT mapping. If I point my interface mapping to a normal message mapping, I get no error. Is there anything I am missing?
Regards,
Glenn

The weird thing is that when I test the the configuration in the Integration Directory, it is still looking for my old message mapping (the one i created using xi editor) even though I already replaced the referenced message mapping in the interface mapping to the XSL one.
Yes, I tested the interface mapping with the same data using the XSL mapping and there's no problem.
When I send the message though, I get an error saying "NO_RECEIVER_CASE_ASYNC" I really don't see why it should not recognize the receiver. I tried refreshing the cache but it still looks for my old mapping program...
:P

Adapter engine not found in Integration Directory

Hello All,
We are having a new server installation. The problem I am having is in Integratin Directory --> Communication Channel, no option for Adapter Engine is present in the drop down. I have checked the following options:
1) SAP BASIS Component with Adapter Mata data is present in Repository.
2) In SLD, Content Maintenance, class XI Integration Server. There are 3 associated objects (the last column). XI Sub-System viewed application system is also present.
3) The Technical and Business Systems are already created for XI Integration Server in SLD.
I have also suggested the blog /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory , to the Basis team, however the problem still persits.
Kindly suggest how we can resolve the issue and start executing our scenarios.
Regards
Pravesh
Edited by: Pravesh Sharma on Mar 9, 2009 10:11 AM
Edited by: Pravesh Sharma on Mar 9, 2009 10:12 AM

Hello,
I think the BASIS Team has gone through or implemented this OSS note as it is mention in the blog above. However the problem still persists.
Regards
Pravesh

Multisim user error user.ewfg not found

Hello ! I have a problem with Multisim 8: i've installed it as administrator and when i try to launch it as a user (the user name is student) i get this error: student.ewfg not found default.ewfg nor found! i have enabled Full control options and it still doesn't work. It would be great if anyone can help me. Thank you

If you logged on the machine with an ‘admin” account Multisim
starts but when logged on with a "user" account, it does not, then
this have to be a permission issue. You need to give everyone full access
to the following folders:
1. Multisim user
2. Database
Double check mscomp_s.prd inside the database folder, the permission you set on
the Database folder does not inherent to this file.
Tien P.
National Instruments

User Extension not showing in Corporate Directory on

I have a User whose name shows in the Corporate Directory, however his Extension not showing in Corporate Directory and unlike all other users who have a telephone Icon next to their name, his just has like a keypad icon.
Where do I start to troubleshoot this?

When I view the "End User" under User Management that User has no Phone listed for that users. I tried to find a way to manually change it, but I don't think I can because we are set to sync with AD.
So I'm thinking that the error may be in AD? What do you think?

WLWPatchInitialize.cmd file is not found in specified directory

iam trying to install weblogic 9.2, i have checked "apply patches" option and "the patches were successfully applied" message is also displayed, but the WLWPatchInitialize.cmd file is not found in the path they provided. please let me know what may be the mistake iam doing. Did anyone have the same issue?
Thanks,
Viswanath.

Exactly what do you mean by a 'downloader'?
Thanks
Pete

Error Message: CORE USER CREDENTIALS NOT FOUND

I was prompted to automatically update Digital Editions 1.5, which I did. I'm on the same computer I've always had. I authorized the computer; however, now when I try to access my library, I get this message:
Error W_ADEPT_CORE_USER_CREDENTIALS_NOT_FOUND
Document is licensed for a different user account
I used my regular email address and password to authorize the computer. Can you help? Thanks.

I contacted my library' support team and they came up with a solution. However, I'm not sure it will work for those who are unable to redownload titles (from my website, I'm able to download ebooks a second time....)
This is what they said:
1. Open Adobe Digital Editions and delete the title you are having
trouble with. Then close Adobe Digital Editions.
2. Open the 'Control Panel'.
3. Open 'Folder Options' and select the 'View' tab.
4. Select 'Show hidden files and folders'.
5. Un-check 'Hide protected operating system files'.
6. In the warning message you receive, click 'Yes'.
7. Click 'OK'.
8. Close the Control Panel.
9. Navigate to the following location:
C:\Documents and Settings\(user name)\Application Data\ Adobe\Digital
Editions\
10. Delete the Voucher folder.
11. Navigate to My Documents / My Digital Editions. Delete the PDF
file for this title.
12. Also in the 'My Documents / My Digital Editions', delete the
manifest.xml file.
13. Navigate to My Documents / My Digital Editions / ebx_backup.
Delete the PDF file for this title.
**** The following steps involve modifying the registry. Please be VERY
careful and do not delete or rename anything else in the registry
besides the items mentioned below.
14. Click 'Start > Run'.
15. Type 'Regedit' and click 'OK'.
16. Navigate to 'HKEY_CURRENT_USER\Software\Adobe\Adept\Activation'.
17. Here you will see several folders, numbered 0000, 0001, 0002, etc.
Click once on '0000'. In the right pane, you should see one entry with
something in the 'Data' column. One of these folders (0000, 0001, 0002,
etc.) will have 'loanToken' for the data. Expand this folder.
18. Inside the 'loanToken' folder, you will have more folders numbered
0000, 0001, etc. Select them one at a time. You should see several that
contain a name of (Default) with Data of loan. Delete each numbered
folder (0000, 0001, etc.) that contains the (Default) loan inside it.
19. Close the registry and open Adobe Digital Editions. It should open
without error.
20. Return to the library website and try the download of your title again.
Hope this helps!

User SSO not found in NTLM directory

Similar Messages

Maybe you are looking for