User status and standard reports

Dear all experts,
i want to use user status to clarify which phase the project is in.
is there any standard report that can show the user status column in the information system?
i haven't found it. thanks a lot.
by the way, is there any easy way for the project manager to check almost 80 projects progress?
the project mananger need to know which phase the projects are in, is it behind or ahead of schedule.
please share your opinions with me or give me some suggestions.
thank you very much.
Judy

Hi Judy,
To know the progress of the project, you can use Progress Analysis.
WIth progress analysis, you can know the Schedule and cost variances with which the project manager can know whether the project is ahead of schedule or behind schedule.
For Individual processing, use CNE1 and for collective processing use CNE2. Also, try CNE5 for reporting purpose.
Please refer the link for more details,
http://help.sap.com/saphelp_erp60/helpdata/en/b4/ba853488601e33e10000009b38f83b/frameset.htm
Regards,
Kabir

Similar Messages

Report on production order status and shortage report

I want to know standard report on production order status and shortage report. Kindly suggest.

COOIS - Production order information system . In this report you can give system status in selection screen and in report you can get complete status details (both system and user status) .
shortage report - CO24

User status and System status for Trade Promotion

Hi all!
CRM 7.0 Web UI Trade Promotion Management.
I have a trade promotion with custom status already assigned and visible from WEB UI, Is it possible assigning to such TP also a standard status picked amongst TP system status?
Take into account that in the as is configuration we find in the same TP drop down list user status and system status.
2 questions:
1. How can I hide the system status?
2. It is possible to group together user status and system status? E.g. User status: fundrequest, inplanning, submitted...+ released (system status).

Hi Virginia Zitun,
Can you tell me how did you manage to solve the issue.
rgds,
Venkat

Customizing root folder for our custom and standard reports

Hi Experts,
We are planning to have customizing root folder for our custom and standard reports,
I have couple of questions to do this customization.
1)     How do we setup root folder as default instead XA or SSA for all the users?
2)     What are the implications on Spend adviser reports, we will not customize spend adviser, planning to use standard SPD?
3)     Do we have any developments required or setup at visual Admin level?
Someone can guide me what would be the pros and cons along with above concerns? Your reply will be highly appreciated.
Regards,
Mahesh

Madhav,
Do i have further inputs on this?
Regards,
Mahesh

Use of user status and business actions

Hi all,
I'm new at status profiles, user status and business actions.
Currently we are using status profiles and user status for orders - but business actions aren't assigned to the user status. In a project I should evaluate whether we can use those business actions.
After reading a lot of documentations there is still one question left. What are the business-actions for and how can I use them?
Let's say I've a status profile with following user status with according business actions:
- status: new;   business action: to progress
- status: in progress;   business action: to confirm
- status: confirmed;   business action: decline or close
- status: closed;   business action: close
What happens when a user sets the status of an order to "confirmed"? Will be done additional checks for my order? - If yes: Wich checks will be done and exists there an API to effect these checks or to implement additional checks?
Regards,
Christian

Christian;
If you´re wanting to speak about Status Profile in OP. You can execute whole theses steps in T-code BS02, when in this IMG:
1. Enter a Status Profile.
2. Assign the status profile to an Object Type.
3. Define the User Status.
4. Assign Business Transactions to user statuses.
5. Translate the status profile and user statuses.
You can also to use this function to simulate the status development for a particular object.
To do this, select a status profile and branch to the screen "Allowed Object Types". Then place the cursor on one of the object types.
Using the function Extras -> Status simulation, you can simulate the status changes that could be caused by performing various business transactions, or by changing the staus manually, during the lifetime of the object concerned.
You can also branch directly from simulation to status maintenance for the object concerned, to display information on which transactions are allowed or disallowed in the current situation.
The log function records all the changes you simulate and allows you to navigate freely to see what effects these are having.
Status profile info
Using the function Extras -> Status profile info, you can display a list of all the entries you have made for a particular status profile. The list is structured as follows:
The first block contains the permitted object types.
The second block contains the user statuses.
The third block contains the following information for each user status:
which transactions it allows
which transactions it allows with a warning
which transactions it disallows.
I hope help to you
Regards
Luciano Nobrega

Customized and Standard Report

How we can differentiate between Customize and Standard report???

Hi Mike
thats a tough one, the PO generation is a bit restrictive to say the least when it comes to customizing. It sounds like you have worked out how to get your own template in there to render the PO.
On the data front, all I can think of is to customize and replace the seeded PO view with one that incorporates your extra data.
Or, get into the page customization world and write your own extract and format concurrent program/procedure and then hook it onto the buttons where you want to launch it.
You might have more luch, response wise from the EBS PO forum.
Procurement : Procurement
OAF: OA Framework
Regards
Tim

Updating User Status and Status Profile for a Project

Hi,
 I am creating a Project using BAPI_BUS2001_CREATE.
 which uses a structure BAPI_BUS2001_NEW for storing details of a New Project.
 It does not have fields for User Status and Status Profile , if any one of you worked on Project Systems, please tell me is there any way to update these 2 fields.
I have tried lot of FuncModules and BAPIs which deal with PROJECT CHANGE and PROJECT MODIFY but none of them has these 2 fields.
Please provide me some solution for this.
Thanks in Advance.

Hello,
U need to do like this:
PERFORM CHANGE_STATUS_CLSD.
FORM CHANGE_STATUS_CLSD.
DATA: LR_PROJ LIKE PROJ,
 WA_JEST LIKE JEST,
 LT_PRPS LIKE PRPS OCCURS 0 WITH HEADER LINE,
 LT_JEST LIKE JEST OCCURS 0 WITH HEADER LINE,
 RA_PRPS TYPE RANGE OF POSID WITH HEADER LINE.
CLEAR: LR_PROJ.
SELECT SINGLE * FROM PROJ INTO LR_PROJ WHERE PSPID = SP_PSPID.
IF SY-SUBRC = 0.
 SELECT * FROM JEST INTO TABLE LT_JEST WHERE OBJNR = LR_PROJ-OBJNR.
 LOOP AT LT_JEST INTO JEST.
 IF JEST-STAT = 'I0001' OR JEST-STAT = 'I0002'.
 JEST-INACT = 'X'.
 UPDATE JEST.
 ELSE.
 JEST-INACT = SPACE.
 UPDATE JEST.
 ENDIF.
 ENDLOOP.
 CLEAR: LT_JEST.
 REFRESH: LT_JEST.
 SELECT * FROM PRPS INTO TABLE LT_PRPS WHERE PSPHI = LR_PROJ-PSPNR.
 IF SY-SUBRC = 0.
 SELECT * FROM JEST INTO TABLE LT_JEST FOR ALL ENTRIES IN LT_PRPS
 WHERE OBJNR = LT_PRPS-OBJNR.
 LOOP AT LT_JEST INTO JEST.
 IF JEST-STAT = 'I0001' OR JEST-STAT = 'I0002'.
 JEST-INACT = 'X'.
 UPDATE JEST.
 ELSE.
 JEST-INACT = SPACE.
 UPDATE JEST.
 ENDIF.
 ENDLOOP.
 ENDIF.
 LOOP AT LT_PRPS.
 CLEAR WA_JEST.
 SELECT SINGLE * FROM JEST WHERE OBJNR = LT_PRPS-OBJNR
 AND STAT = 'I0046'.
 IF SY-SUBRC NE 0.
 WA_JEST-MANDT = SY-MANDT.
 WA_JEST-OBJNR = LT_PRPS-OBJNR.
 WA_JEST-STAT = 'I0046'.
 WA_JEST-INACT = ' '.
 WA_JEST-CHGNR = '001'.
 INSERT INTO JEST VALUES WA_JEST.
 ENDIF.
 ENDLOOP.
 COMMIT WORK AND WAIT.
ENDIF.
ENDFORM. " CHANGE_STATUS_CLSD
REagrds,
Vasanth

User Status and system status

Hi PS Gurus,
As per client requirement
a)no finance posting
b)no cost planning
c) no budgeting
only project ,wbs and network(no activity) should be created .
These all transection should be carried out after releasing of particular WBS,Network (System status REL ).
We have created user status profile in ok02 and assigned in project profile
Data maintained in status profile
St NO Status   StatusShort Text                   Lowest   Highest Posit    Prior      Auth. cod
1    CRET CREATED                                     1           2         1          1
2    REL   STOP DATA UNLESS REL               2          2         1           1
In status CRET we have forbidden all business transection which client don't require.
But when we are relasing the WBS (system status REL) ,user status is remain CRET .
We want that after releasing WBS ,user staus should change to REL. which allows the all busness transections.
Kindly help
Regards
Project Team 1

Hi Experts,
Actually, I have done as suggested over here like creating a NREL user status and it is working fine, but for my client, I had to ensure that the "Release" is allowed only after the budget is released ( after CJ32). This is working till the time it gets the Sys. status "BUDG" and BUDG gets assigned immediately when we give the budget through CJ30. How to do this ?
Also, I want this to get only assigned to the topmost WBS whereas as I had assigned this Status profile in the Proj. profile, it is getting assigned for all the WBS... how to overcome this problem ?
thanks in advance,
Vinodh.

The user status and system status

hi, expert.
1. how to bind the user status and the system status.
2. if the status of the network is "CRTD", the status of WBS can't be "TECO".
how to customize.
Please explain me all the steps to be required.
Thanks in advance!

Hello
Define User status in OK02. Define various statuses and number them. Then double click on each status n you will be taken to transaction control screen. Here click on create tab and then set the influencing statuses for each system status. However this will be individual for WBS and Network.
Define them seperately for WBS and Network
Thanks

EQUIPEMENT - User status and system status

Hi freind,
It would be great help if someone can brief me on procedure / bapi or function module availability for USER STATUS and SYSTEM STATUS update to equipement.
regards
Pravin

hi Pravin,
Check this out
USER STATUS
http://help.sap.com/saphelp_erp2005/helpdata/en/56/254c40cc538437e10000000a155106/frameset.htm
SYSTEM STATUS
http://help.sap.com/saphelp_erp2005/helpdata/en/bd/7924da4d0d9043b426fc081669f27a/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/9f/972f72ec2a40479d2a7dec4500a4f2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/68/ebac18beabc34b90d4c1949a66dece/frameset.htm
USER STATUS/SYSTEM STATUS
http://help.sap.com/saphelp_erp2005/helpdata/en/89/a432ff461e11d182b50000e829fbfe/frameset.htm
Regards,
Santosh

User Status and System Status - CJ20n

Hi,
I would like to know if any problem but when i have the user status and the system status are filled those fields no longer appear in the TC CJ20N.
What could be the problem??
tks in advanced

I know it's been a long time, but I think I can help...
Didn't you activate que status exit?
If yes, you problem is there, you have to pass the information from IMPORT to EXPORT in your exit, or deactivate it.
Best regards,

Is there User Group and Role Reporting in SAP Enterprise Portal?

I want to know if there is a way to pull users statistics our of SAP Enterprise Portal like you can out of the R3 backend systems.
I would like functionality similar to the SUIM transaction. I know through user administration you can access any user, even a list of all users, and you can do similar lists with roles and groups. You can then access any of these things individually and look at their assignments. However, I want to do this on a large scale. I want to know for example every group that has a user assigned to it. Evergroup that has roles assigned to it. Or groups that have no user or role assignments. We have approximately 1904 groups in our Production Portal system and I am trying to clean up the groups that have no user assignment, but I don't want to look through them one by one.

Hi Chris,
There is no standard report available for this purpose. However all this information is stored in table UME_STRINGS.
You can write your own SQL queries to generate such reports. However please note that this table is not normalized, and it's a master UME table. You should use it strictly for READ ONLY purpose.
For a sample code you which i wrote some time back, you might refer:
http://forums.sdn.sap.com/thread.jspa?threadID=2088099&messageID=10859334#10859334
Thanks
Prashant

Antimalware Overall Status and History - Report

Good morning,
I have setup a subscription to the default report in SCCM named "Antimalware Overall Status and History". When the report is sent out it sends a nice pie chart with categories underneath it. The categories are the following :-
- Protected
- At Risk
- Not yet Installed
- Client Not Supported
- Inactive
- Configuration Manager Client Not Installed
The report works great and it adds all of our clients in to the correct category. However my question is - How does SCCM determine which category clients are added to. Are there certain requirements that a client must meet before it is added to the "Protected"
category.
Also is it possible to edit the settings for these categories?
Regards,

Hi,
Since it is related to SCCM, I recommend you to ask in the forum below for professional assistance:
http://social.technet.microsoft.com/Forums/en-US/home?forum=configmanagergeneral
I am really sorry that I moved it to this forum by mistake. Sorry for the inconvenience.
Best regards,
Susie

User statuses and budgeting

Hi Experts,
I want control on generation of PR , PO before project has been budgeted.
For that I have created status profile and 2 status as BUGD and NBUD. I also link this status profile in OPSA.
But still my PR and PO are generated without allocating budget to them.
Just now I have checked that without CJ30 , WBS is not releasing. But network and Activities below it canbe release so I can make PR and PO's. I need control on total PR , PO generation.
please guide me in this topic.
Thanks and Regards
Raghav
Edited by: Raghav123 on Dec 10, 2010 11:49 AM
Edited by: Virendra Pal on Dec 10, 2010 11:50 AM
Please search forum - there are lots of threads on how to use user status to disallow PR and PO

Thanks.
Any idea if this could be used in iRecruitment? We have a lookup in iRec 'IRC_EMP_CAT' and its not extensible. I need to add in more categories there but cant do so. Do you think this window can do what I need?

Maintain the link between user status and system status

Hi friends,
my requirement is In crm transactions when we change the system status(inprocess) then the relevant user status (inprocess) is also to be changed automatically. how can we do this? wt r the customisations we can do for this?
pls suggest me? thanks in advance.

Hi Madhu Sudan,
When you create User Status in Status Managment...
Eg: Inprocess
You assign User Status Triggers Business Transaction.
So, This maintain the link between the User and System statuses.
Reward Points if helpful.
Srini.

User status and standard reports

Similar Messages

Maybe you are looking for