User status change in inspection lot

sir,
when i am doing ud in qa11 that there is compulsary a USER STAUS must be QAA Aprroval by QA manager if user staus is QCNA not approvewd by QA manager then it gives error for user status changes must be compulsary.
so where we can change that user status of .I have a one option in qa02 is there any another options.
Please guide me

Dear Prakash
If you want to manualy change the status in QA11, you can change there itself. Near to the user status there is a change where you can change the user status ( Set status button - tick and change button)
Regards
Gajesh

Similar Messages

Automatic Selection of "User Status Profile" for Inspection lot

Hi all,
I have created "User Status Profile" for particular plant to block UD if Results are not recorded ; I want this 'User status profile' to be selected automatically in record usage decision screen - qa11 of inspection lot .Please let me know how to go about this?
Thanks
Veeresh

You can call the inspectiion whatever you want up to I think 6, (maybe 8) characters.
You can use 04pppp where pppp = your plant ID. So 041000, 042000, 042010, 043000, 043140, etc...
In the insepction type setup in the material masters you can set the inpsection type you want to use in that plant as the "preferred" one by checking that box in the inspection setup in the material master.
FF

Change of Inspection Lot Specifications at the time of lot creation

Hi,
We are using In-process inspeciton.
At the time of Production Order release an Inspection Lot is created automatically.
We want the Lot Specification values to be changed based up on the Configuration of the Sales Order.
Is there any User Exit or BADI that can be used for this purpose?
Ramakanth

Hii,
Lot specifcation values cannot be changed once inspection lot is created. If u know specification only after creation of inspection lot then u include unplanned inspection charcteristics. Here u can define spec after lot creation also.
with regards,
K.Lokesh.

How to generate a report from crm table to find out user status changes

Dear all,
Could you please help me on generating a report from SAP CRM table level
to find out user status changes in crm orders for a specific period of time?
Thanks in advance,
Regards,
Shaik

Hi Shaik.
You would not need to write report for this. You need to create a Table view mainenance for the CRMD_ORDERADM_H or CRMD_ORDERADM_I for whichever you need.
Follow the below or search on google for more on table view maintenance.
Go to SE11, give the table name and click on change. Then Go to utilities--> Table maintenance generator.
In the table maintenance generator screen, you should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually you will create with one
step. You should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, you find display, Maintain options.
You can view the table contents by choosing Display and supplying the selection criteria of dates.
Regards
Apoorva

EXIT/ BADI/ Enhancement point for User Status change in Order

Hi all,
I am looking for an EXIT or a BADI or an enhancement point specifically for user status change in an order thru IW31/IW32.
I have the exit names for Order PBO, PAI, 'SAVE' event etc. so m not looking for generic answers.
I have to put some validations for the Order on USER STATUS CHANGE. Let me know if any of u have any pointers on that.
Thanks and Regards,
Sonal

Hi,
Use this Enhancement IWO10009 and call these function module to change the User Status
STATUS_TEXT_EDIT --> To Read the existing status.
STATUS_CHANGE_INTERN_VB --> to change the status.
Regards,
Satish

User Status change problem in Process Order

Hi,
We are in process of upgrading our system from 4.6C to ECC 6.0. I have a problem with User status change for process Orders.
In 4.6C we are using the profile x with settings:
10     ZNEW     Created process order     10     90     1     1     ZSTA
20     ZLCK     Locked process order     20     90     1     1     ZREV
30     ZOPN     Reopened process order     20     90     1     1     ZOPN
40     ZMST     MES order started     20     90     1     1     ZMST
50     ZMCL     MES order closed     20     90     1     1     ZMCL
90     ZTEC     Technically completed      20     90     1     1     ZTEC
In ECC 6.0 we also use the same profile settings as above.
The problem is in ECC 6.0 when I do a goods receipt the User status changes to ZTEC . The process followed is ..Create process order, Release Order, Goods issue, Phase partuial confirmations, Goods receipt and then Finla confirmations of phases. Now in 4.6C if i do the above process the User status remains at ZMST and it only changes to ZTEC when i technically complete the order but in ECC 6.0 when I do a goods recipt from above steps the User status changes to ZTEC. THis should not happen.
Any pointers will be very helpful.

Hi,
The log for production order preliminiary costing is not saved. Therefore, once the order is saved, there is no log available anymore (this is by the way a question of PP; none of the logs is saved).
Hope that helps...
Regards,
Declan

User status change document

There is a requirement , the project will be created and then a user status will be changed in 5 steps as the project goes through approval process and at the end of the process the project will be released. I want to tract down the entire process of the user status change over time. How can I do that, creating change documents for status profile? But in one place I found that change document only created if system status is set to released? In my case system status will be set to release only after all the status change in user status happened.

Hello,
Asides from the obvious adding of a new status to status profile SDADHEAD, you may want to have a look at the SPRO activities:
SAP Solution Manager
-> Scenario-Specific Settings
-> Change Request Management
   -> Extended Configuration
    -> Change Request Management
     -> Change Transaction
      -> Change Transaction Types
        o Define Status Attributes
Also activity "Make Settings for Change Transaction Types" in the same path is important.
Best regards,
Miguel Ariñ

2LIS_11_VAITM delta with user status change (JEST, JCDS)

Hi,
I'm using standard datasource '2LIS_11_VAITM' for sales order delta, and I'm trying to add new fileds which is user status in 'Status' tab in sales order.
I thought it would be captured as delta if I change user status of sales order, but it's not captured as delta.
I'm trying to avoid using generic datasource with table 'JEST' or 'JCDS'.
Is there any way that user status change can be captured as delta?
Any help would be much appreciated.
Regards
Bryan

Hi Bryn,
Normally when the status is updating is there flag is updating accordingly.If yes considered that field also for enhamncement then delts records will be picked for user status.
More details check with SD consulatnt they will provide the complete details.
Regards
Ram.

QM qusetion realted to limit change in Inspection lot

Dear All,
I have question, In the result recording screen (Transaction is QE51N,QE11,etc) there are some option that are not available, I mean they are found disable that I can't click & check the functionality of it. E.g. In RR screen Goto>Change unit to be insp.>All four function for this node are not available. Can any one make me clear why it's so this and what should I do to to use/activate it.
I have came across this functionality because of an online query.
In one in process inspection lot the user has rectified the pH limit was wrong and I had and extreme urgent requirement to correct it.
I have suggested them to use unplanned MIC in place of this wrong MIC and force close the wrong one or reverse the entire process.
With Best Regards,
Shyamal Joshi

Hello all mentors,
I think i will not get any relpy for this thread hence closing it to contribute for new announcement for "Question Limit of 10"
Regards,
Shyamal

Mass change in Inspection lote, when assigning UD Code.

Dear all,
curently we are facing an issue of having to mass change inspection lotes when assigning UD code.
The senario is as follows:
using the tcode QA16 I can mass assign UD code for various inspection lotes using the option "in background". The requisition of the client is, however, to enter also a description text, for all the lotes treated. I an use the tcode QA16 and run a UD manual option, that lets me enter a long text for each inspection lote, along with assigning UD code. That is not acceptable, since there are daily hundrets of lots, we are talking about. That makes the manual option very time consuming.
Anyone had a similar issue? What I am looking for here is some exit, or other type of solution that allows me basically replicate the long text (the same for all treated lots) for various lots automatically. I was thinkig of QA16, making some necessary adjustments, but I not sure if it will serve for this purpose.
Any suggestions will be highly appreciated,
best regards,
Anna

Hi,
I think you would need to go for BDC to achieve this. Since this is required on daily basis, you should run BDC to enter the long text against the UD for each batch. This should work.
ntn

User Status change date

Dear All
For an ABAP report , i need to find the table names for date and time of change in the User Status for the Maintenance Order. ( for example from INPR to RETN)
I have tried JEST and CRM_JEST tables but couldn't found the correct result.
Pl advice.
thanks in advance
Regards
Manish Bansal

Take the object number OBJNR and go to table JCDS
Field Status STAT starting with 'E' i.e., your user status.
You also have time/date fields there.
Regards
Sreenivas

WBS user status change doesn't trigger changed by update...

Hi all,
I've inherited a program that is used to programmatically change the system and user status of WBS elements. The user has reported an issue where the Change By and Changed On values displayed on the Admin tab of tcode CJ20N are not updated after the user status for a specific WBS has been programmatically updated. The system status update works fine...both fields on the admin tab are updated. I searched the forum and couldn't find anything that speaks specifically to this problem...does anyone have any thoughts?
Thanks in advance.

Yeah, that makes sense.
I'm thinking now that if I create a new version in the web gallery and crop it just for the web export the app will probably re-send that image out to the web site because it treats the new version as a different image. Since the new version really doesn't take up any meaningful hard drive space this wouldn't be a deal-breaker, but I would have to remember to NOT delete that version or change the crop ratio before uploading the gallery again.

Update of Order Changes in Inspection Lots

Hi all,
Is it possible to update production order changes in an inspection lot automaticaly with inspection lot origin 04?
I know this is possible with inspection lot origin 03, but we use 04 in our company.
Thanks in advance,
B.
Edited by: Brian O'N on Jul 21, 2010 2:06 AM

Did you ever find a solution for this? We have a similar requirement where we need to see the change history for our batch master characteristics.

CRMD_ORDER User Status Change before Save

Does anyone know where I am able to check what the User Status has been changed to by an action before saving? I would like to be able to retrieve this using ABAP. One of the function modules I used to retrieve statuses only has the current saved Status.
Thanks

Try using FM CRM_ORDER_READ_OW. It reads data from the memory and not from the database. You can probably call in from an ORDER_SAVE badi implementation.

2 custom events getting triggered on user status change

Hi all,
In IQS21 transaction, once a user changes the user status I need to send a work item to the superior.So for this I have delegated
the business object BUS7051 to ZBUS7051. I have created 2 custom events HOD and APP.
I have even configured all the settings in BSVZ.
There are 3 user statuses 1.Created 2.HOD 3 .APP
Once user changes the status from Created to HOD a work item(notification in change mode) should go to the superior and similarly from HOD to APP also.
The problem is when I change status from Created to HOD,APP event is also getting triggered along with HOD.
Please tell me where I am wrong.
Refards,
Nishant

Nishant,
The APP event is used for Display the notification right? The two events are triggered for the same process. So the two events are linked with same process. Have you done anything in SWEC?
Thanks.

User status change in inspection lot

Similar Messages

Maybe you are looking for