User status erof is active (ORD 900000000000)

HI All,
I am getting the following error message when try to do actual settlement for production orders at CO88.
"User status erof is active (ORD 900000000000)"
Could anyone tell me what happend and What should i do to fix it ??
Thanks & Regards,
Manju

Hi,
Obviously in your system you are using user statuses in production orders.
I don't know this specific "erof" status, since it is particulary defined in your system only.
Via user statuses we can control the processing flow of production orders, in a specific way. In your case this status is defined in such a way that it will not allow settlement.
The simplest way out is to edit the order and manually change this status, if this is not disabled by the same status!
Regards,
Mario

Similar Messages

Error: "User status Z5 is active (ORD 300761)?"

Hi
Experts,
While Iam doing ME21N an error occurs, even though while I want to change the Budget Amount in KO22, it is not allowing due to below error, I checked KO02, KO22,
User status Z5 is active (ORD 300761)
Message no. BS014
Diagnosis
For object ORD 300761 user status Z5 (Technically Complete (IO)) is active. According to this status, transaction 'Budgeting' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
Thanks,
Anil

Hi Anil,
It seems like you dont have authorisation to change the status.
Please check with your BASIS person, he may provide you the required authorisation.
As soon as you got the authorisation message, type immidiatly ?NSU53 in transaction code field and ENTER.
You will now get the information regarding roles, which will be helpful to BASIS people for tracking authorisation for you.
Regards,
Srinu

User status 10 is active (ORD 70111521)

Diagnosis
For object ORD 70111521 user status 10 (Opened) is active. According to this status, transaction 'Material purchase order' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
need help

Use CO02 Change production order or CO03 Display production order
there are two status One is system status which can be set only by the system internaly after performing certain events.
another one is user status, which is set by the user manually after performing some actions.
User Field comes next to System Status.
for example in production order it comes next to system status bleow order and material number field in
Production Order Display/Create/Change: Header Screen
Configuration of User Status:
Define Status profile - Tcode -- BS02
Define Selection Profile - Tcode - BS42
This is same in Maintenance Order.

System Status LKd is Active( Ord 4257568)

Hi,
I am doing dsettlement of an PM order with transaction KO8G, but by one order I get an error message " System Status LKd is Active( Ord 4257568)
How to tackle this?
Thansk
Br,
akkshaya

It also depends how your orders are being generated. If you are generating the orders from a sales order line item and a user deletes the line item or rejects it, the service order will automatically be locked from further processing. The action log will display the end users name as the one who locked the order, but the transaction code will be VA02.

User Status LKD is active(ORDTMC1001)

Hi,
While doing capital purchase order through internal order a message is being appeard as "User status LKD is active(ORDTMC1001).
What could be the possible solution ?
Best Regards,
Samrat Roy

Dear Waman,
Whenever I create new Internal Order user status shows PLIM and LKD under Control Data of Internal Order master. Go to Set / Reset and uncheck the tick from status LKD and save the record. Why this status become locked i.e, LKD automatically in every internal order creation ? How it can be removed and during creation of new internal order user status will show only "PLIM". What should be the actual status of Status Profile for Internal Order ?
Best Regards,
Samrat Roy

Error in F110: System status CRTD is active (ORD 603625)

Hi All,
In APP, one of the vendor is going in to error .
The log says System status CRTD is active (ORD 603625)
When I check, for the particular item in vendor line item display, that is linked to the
purchase order, which in turn is linked to the internal order 603625 . The internal Order 603625 is
in CRTD status.
I think the status of the order needs to be changed to TECO.
But I have two questions here.
1. What factors should be looked in to before changing the
status of the order to TECO.
2. Why the system is not able to make a payment when the ORDER is in CRTD status.
Regards
Rudra

Hi Rudra,
You received this error from the Status Management of the Internal Order.
1. What factors should be looked in to before changing the status of the order to TECO.
Actually, you should not change the status to TECO (Technically Complete) rather you should Release it then APP will be processed.
2. Why the system is not able to make a payment when the ORDER is in CRTD status.
Every status in the Order is assigned to the Transactions Allowed
Common Scenario
1. When status of the order is CRTD then you can only post budget to the order, you can not make FI Posting.
2. When status is RELE then you can make an FI Posting.
Ask the owner of the Internal Order to shift the status if conditions have been met.
Regards,
Chintan Joshi

Urgent: error: user status ECUS is active for equipment.

Gurus,
My material is assigned to only one serial no. and one equipment.
I am trying to do pgi from va02 and the system is throwing an error saying ' user status ecus is active for equip.' but in iq02 when we check the ecus status is not active. infact when we change the user status to anything the error thrown is still the same. Kindly reply urgently as this is affecting the clients production process.
Thanks,
Anand.

hi
i think once you have delivered the material ,it will create the equipment master record record stating the status as installed at customer site,
the status you have said i think is user status ,if so kindly change the user status and proceed with the above said procedure
revert back with any further queries
regards
thyagarajan

Error: User Status OUTS is active

When using IW42 to enter completion comments on a work order, I enter the work order number and green check it. If the work order does not have an underlying notification, I get a 'User status OUTS is active (QNF #1)' error (actually, two identical errors are displayed).
Any ideas?
David Macindoe

Paul, Naresh,
I got it. My default notification type was set to M2. In my organization an M2 notification is created with an OUTS user status set and the notification must be "approved" (user status set to APPR) before further processing can be done.
M3 notifications have no such user status restrictions to deal with They're created and the user is off and running.
With my default notification type set to M2, IW42 couldn't get past the user status restrictions.
We tell users to set their default notification type to M3. I'm not sure how mine got set to M2.
I appreciate both of your help. You zeroed me in on the real issue.
Thanks again!
David

System status TECO is active (ORD 1001020)

Dear All,
    System status TECO is active (ORD 1001020).
        Thanks
         parag

Parag,
I don't seem to be able to find a question in your post.
You can set/unset TECO status in transaction CO02. Ignore any warning message concerning change. Then, Functions>Restrict Processing>'Technically complete' or 'revoke technical completion'. Save
Rgds,
DB49

System status CRCR is active (ORD 100000705277)

HI All,
I am getting the following error message when try to TECO the process order
"System status CRCR is active (ORD 100000705277)"
Could anyone tell me what happend and What should i do to fix it ??
Thanks & Regards,
Saiful arif

CRCR: control recipe created..
Go to CO55 or CO60 and complete (if not completed) the control recipe of that process order then go to co54 and send Process Message regarding completion of control recipe.
Once messages is sent status of process order turns to CRFI from CRCR.
Edited by: karthick PP on Jun 25, 2009 5:55 AM

System status CLSD is active (ORD 4000111)

Hi Guru,
I tried to execute MIRO transaction however I encountered the error "System status CLSD is active (ORD 4000111)"
Diagnosis
Object ORD 4000111 has system status CLSD(Closed). According to this status, transaction
incoming invoice" is not allowed.
Procedure
You can only carry the requested function if this is allowed according to the status of the object.
Please advise me how to correct the error.
Thanks,
Memarslon

Hi Guru,
Thank you, Here we encounter an error related to closed order when using MIRO.Could you pls help to check how to revoke closed status.
Thanks,
Memarslon

User status SAGI is active (EQU 10030745)

Hi All,
User has created one Delivery. And when a particular serial number is assigned to the material of the delivery document, we get the below error message in a popup window.
1. User status SAGI is active (EQU 10030745) (Error message)
2. System status ECUS is active (EQU 10030745) (Warning)
3. Serial number 452600 cannot be used here (Error)
when i click on the help icon, it says
Diagnosis
For object EQU 10030745 user status SAGI (Serial no assigned GI) is active. According to this status, transaction 'Delivery note assignment' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
How do I need to resolve this issue? Awaiting for your valueble suggestions.
Cheers.
Anil.

Dear Waman,
Whenever I create new Internal Order user status shows PLIM and LKD under Control Data of Internal Order master. Go to Set / Reset and uncheck the tick from status LKD and save the record. Why this status become locked i.e, LKD automatically in every internal order creation ? How it can be removed and during creation of new internal order user status will show only "PLIM". What should be the actual status of Status Profile for Internal Order ?
Best Regards,
Samrat Roy

Getting Error User Status DPND is active

Hi Experts,
I am getting error User Status DPND is active , during saving User Decision.
I am getting this error only If i am doing Defect recording in QE01.
Without Defect Recording there is no error ....
Plz let me know what is this error & how to resolve it ?
Warm Regards,
Dheeraj Sharma

Hi Dheeraj,
With Defect recording, system creates Q Notification based on the Notification type assignment to the
Inspection Type in Config step QM>QN >Defects recording
This assignment is at client level, not advisable to change
There is one more setting at Defect Class level, (You assign Defect class for Defect code while creating catalog Type 9) In defect class if you uncheck "Activate Q-Notification" in the "Next fuctions in results recording section" system will still genrate QN but will not be activated
QM>QP>Basic Data>Catalog>Define Defect class
This Notification will be Automatically closed, while UD
For existing Notifications already created while DR , you can go to QM02
Select the item created, go to Task, create new Task and Mark that task as complete, the status of the notification will change to ATCO , complete the UD after this, it will mark the QN status to NOCO and complete stock posting
Thanks
DD

User status teco is active

When the user try to post an Idoc (Order creation) to SAP it didnt get posted as the error message was "user status tech is still active"
I am completely unaware about this status teco . Can some one explain what does the status teco means and how to rectify the above mentioned error
Thanks & Regards,
Rahul

hmm... i think you used the wrong forum. The order you mentioned, is a production order (tcodes CO01, CO02, CO03) i guess?
So, in general, TECO means "technically completed", i.e. that production order stopped because of some reasons without full completion of the order.
Maybe, the following topic is useful for you:
[preventing changes in user status in PM order when TECO is active;
regards
Ralf

USER STATUS at Activity Level

I do have user status defined for Activity and it doesn't show up when i set the status. All i see is SYSTEM STATUS and not user status. To see user status i need to click the blue button (with I symbol) and then see it. Why is this happening like this?
But at Network Header level & WBS level i see both USER STATUS & SYSTEM STATUS.
Any info will be a great help

Hi,
I think WBS and Network are controlling objects in SAP. Activty is related to execution. This may be the reason why SAP has provide detailed ie user statuses at WBS and network level only.
In my opinion you cant achieve this in standard SAP, you may have to for devlopment of customised screen. User exit CNEX0008 will help you.
Regards

User status erof is active (ORD 900000000000)

Similar Messages

Maybe you are looking for