User Status for Installed Base
Hi All,
Pls let me know where to maintain user status for installed base. I believe status profile could be assigned to transaction level only but still SAP help says it is possible to maintain in installed base.
Also let me know is it possible to maintain user status for induvidual objects.
Regards
Ram.
Hi Ram,
In Spro, under the option "Define Installed Base Category and Installation Rules" you have an option to assign status profile to ibase category.
In ibase the user status can only be maintained at header level according to standard. Further information available in SPRO documentation.
Best Regards, Adil
Similar Messages
-
Status profile for Install base component
Hi,
As part of project requirement,we have to maintain status profile at Install base component level.Wwe are maintaining one install base for single customer and all his multiple locations comes under this install base.So,as per client requirement we have to mainatin status at Install base object level.
As per standard functionality,we can maintain status profile at Install base header in status management>status profile>object type
But,I could not find how to maintain status profile at Install base component of type object level.I think we have to do enhancement for it.
Request expert opinion on this.If its configuration,then how to do this.If its BADI,then what are details of BADI.If its enhancement,then details of it.
Thanks in advance
regards
NareshHi,
You need to add the below Object Types in your user status profile.
Go into your user status profile and click on the Object Types as highlighted below and then enable the list of object types. Then you will be able to see the status profile in the IBase header.
Enable these object types for IBase.
Allowed Object Types
General Object
Ibase Header
Product Master Data
Regards,
Siraj -
User statuses for equipment,functional location,order,notification
Kindly suggest me which user statuses should be assigned to equipment,func. location,notification & order.
Regards,
VivekVivek,
There is no rule or std instruction which user status to be assinged to equipment,FL, Notification or order. In std you may get some user status for equipment. notification etc. It doesnt mean that you should use it. User status are define /created base on the business requirement . a user status can be assigned to multiple object type such as equipment, notification ,order etc.
You can refer the std user status profile when you create your own. In order to know the detail of it object type. You can select the status profile >> click on the detail>> click on the object types.
Hope it is helpful to you.
if you want further detail please revert.
DP -
Need help on to set User status for Operations in Maintenance order
Hi experts,
i am new to PM module.
i need to do BDC for IW31. i want to know some inforamtion
on user status for each opertaion.
my problem is ,, what is user status.
why it is saying order is not yet released when saving and status can not set.
in this cases how can i do BDC.User status are something set in the configuration and specific to the company which SAP hasn't given in the system status.
May be in your system user status are configured to set only after the release of the order.
For doing the userstatus you may need to release the order, you can release the order thru bdc and then do bdc for user status. Also see below link
http://www.sap-img.com/plant/user-status-set-date-in-maintenance-order.htm -
User exit for calculating Base line due date in VF01
Hi,
I need a User Exit for calculating Base line Due date i'e ZFBDT with respect to billing date
for VF01
Regards,
Moderator message: if there is one, you can find it yourself by doing due research.
Edited by: Thomas Zloch on Nov 23, 2011 1:52 PM>
Rahul Saxena wrote:
> I have given the condition"BSEG-ZTERM = 'ZTST'" in Prerequisite, and in the Substitutions when I try to assign constant value '02/16/2009' to the field Baseline Date, I don't see that Baseline date field in Substitute fields for Class '009'.
>
> How do I add Baseline date in that popup to select and assign values.
>
> Please suggest.
>
> Thanks-
i think your date format and system date format is not suitable.
give the date format as 20090216 as system format. -
User status for component item in service order (plant maintenance order)
Dear experts,
I cannot find the customizing for assigning a user status (profile) to a component item of a service order.
IW31 - tab components - mark an entry - click on button "component status"
Can you help me?
Best Regards,
PhilippOSS message created. Answer from SAP:
11.02.2011 - 15:04:46 CET - Antwort von SAP
Hello Mr. Miller,
user status for components are not possible and not intended. I'm
sorry that I cannot provide better news.
Best regards
Reinhard Gruber
Senior Support Consultant
AGS Primary Support,
Business Suite & Technology
SAP AG
Therefore this message is closed... but not yet answered
Edited by: Philipp Miller on Feb 11, 2011 3:28 PM -
Hi All,
How can I set the user-status for a PP order, also let me know which user exit suits this requirement, as I know I have to make use of a FM or a BAPI which sets the user-status in the user-exit somewhere.
Thanks
MarkHi,
Try the following enhancements/exits for setting the status for PP order.
STATTEXT
CCOWB001
COIB0001
Regards,
Anji -
Set a User Status for Quality Notifications only if they are "Activated".
Hello experts:
I need to be able to set a User Status for Quality Notifications only if they are "Activated".
When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification". Initially, the only difference between the inactive "Defect Notification" and the active "Quality Notification" is that the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
I checked the business rules for status DEFR and found that the following processes clear this status
PMM1 - Postpone Notification
PMM2 - Put Notification In Process
PMM3 - Assign Order
PMM6 - Put Notification In Process Again
Any Ideas ?Perhaps some additional information would help you understand what I need to do.
For notification type F3, we are recording all defects found in production.
Most of these are expected defects that result in a minor reduction in yield.
For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
When this happens we manually activate the notification and assign tasks to find and correct the cause.
It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing. I therefore want to use the Activation event as the trigger to set my user status. -
U00BFMultiple user status for WBS Element?
Hello,
I need to create multiple user status for a WBS element.
I'm using the BAPI: BAPI_BUS2054_SET_STATUS
CALL FUNCTION 'BAPI_BUS2054_SET_STATUS'
Importing
return = ls_returnbapi1
TABLES
I_WBS_SYSTEM_STATUS =
i_wbs_user_status = it_wbs_user_status"--> This table contais 2 record, with the same WBS elements and diferent status
e_result = it_result.
I put several rows (two) in the table it_wbs_user_status., I put two rows, the WBS elements for the same item with two different status, but I get error because it says that the WBS element is repeated.
¿Can you have multiple user status for the same element PEP? I try it in the transaction CJ20N too, and I don't Know.
Thanks.In transaction CJ20N you can change user status for each WBS elements.
Menu --> Edit --> Status --> User Status --> you can choise betwen "Set" or "Set & Pass On".
I want BAPI, function , etc.... that do the same thar "Set" , not "Set & Pass On".
BAPI_BUS2054_SET_STATUS = "Set & Pass On"
Thanks -
Activation of User status for Prod. order
Hi,
I have created a status profile with a status as a user status for production order. Now the thing is how to activate this user status for a specific transaction.
the requirement is after settlement the user status should get activated for production order.
Regards
Amit ParkhiHi Amit,
As told by Ajay , after assigning Status Profile in OPJH you can assign User Status to production order as below:
Pls. go through the following procedure for activating the User Status :
Activating User Statuses
Use
You can activate a user status at order header and at operation level.
Procedure
Order Header Level
Go to the order header.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Operation Level
Go to the operation overview.
Select the operation in question.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Pls. follow the above procedure as per rquirement and set user status accodingly.
Pls. revert if any doubt and reward if useful.
Regards,
Tejas
Edited by: Tejas Pujara on Jun 23, 2008 8:10 AM
Edited by: Tejas Pujara on Jun 23, 2008 8:11 AM -
Hi all, I want to change the user status NOCO(Notification completed) for M2 type of notification in the Quality client.I did it in Dev client for M2(Break down Notn) and imported the TR to Quality.When i try to assign this status in Quality client, the system is throwing an error as follows.
Status NOCO is not allowed (QNF 10039901). Solution please.Also provide the path in SPRO.
Thanks in advance,
Venu.Have you completed all of the tasks in the notification. Has the Notification the following system status : ATCO ,
If not, you would not be able to complete the Notification. Try Completing all the tasks and then mark the Notification as Complete.
If you have defined any user status to be NOCO, then check that whether in the User status profile, against the current user status of the Notification, the lowest and Highest columns allow the NOCO status or not. Include the status number for NOCO against the current user status. This would solve the problem.
Path for User Status Profile Creation and Assignment:
SPRO>Plant Maintenance and Customer Service>maintenance and Service Notifications>Notification Processing>User Status For Notifications-->Define Status Profile
Edited by: Usman Kahoot on Jun 1, 2010 5:19 PM -
User Status for process orders
Dear Experts,
We are using user statuses for process orders & with this we are resricting or allowing certain business transactions.
My question is can we automatically set the two consecutive user statuses ?
Means when the GR for process order is done i have set the user status as GR.
Next user status is CLSD.
So after completing the closing of process order by settlement transactions can i set the staus as CLSD automatic?
I am trying to do it but i am getting error as-
"Status CLSD is not allowed (ACT 30000292 0010)"
Your help is highly appriciated
Regards
VivekHi,
1) Still your order is carrying cost, it has not settled properly
2) you can check in CO02 itself, Go to tool bar at top
3) here Go to > Costs > Analysis & check whether order is set to Zero
4) you can check in KKBC_ORD also
Also, pls refer below link
Re: HOW automatic order status change to CLSD
regards,
Sankaran -
User status for bid invitation
Hi all!
Could you give me a hand with user status for bid invitation? I made some statuses for Bid and allowed them to transaction type u201Cbid invitationu201D u2013 it seems OK. But when I try to create a bit invitation, Iu2019ve got a system error u201Cstatus profile is not allowed for bidding headeru201D
What can I do to settle this problem?
ThanksEverything OK, I select object type for u201CBidding Headeru201D
-
Hi all,
I have 3 queries-
1) What is the meaning of business transaction "GOODS MOVEMENT" in BS02-status profile / user status screen
2) I have an order with 2 operations in it.
I have created a user status for the "PP/PM operation" business object type and the following business transactions are marked as forbidden.
Confirm transaction
Delete operation
Determine costs
Goods Movement
Partially confirm operation
I want that when the status is assigned to the operation the system that the system should not any confirmation, goods movement (issue/resceipt), activity posting for that operation.
When i assign the user status and make the confirmation by co11 then such messege is issued by the system which is OK.
But when i issue the component by 261 mvt type by mb1c to the order, the system carries out the transaction.???
How it is??
I think this issue is carried out at order level that is why it is.
3) What is the meaning of all the business transactions in bs02 screen???
Regards,
MHPHi Rajesh,
Thanx for the reply. I'd rewared with the points.
I am not clear from ur answers as follows.
ANS 2-- I AM NOT CLEAR THAT IN MB1A WHEN SYSTEM WILL ALLOW & WHEN SYSTEM WILL NOT ALLOW??
U MEAN TO SAY IF IT IS PLANNED THEN SYSTEM WILL ALLOW & IF IT IS UNPLANNED SYSTEM WILL DISALLOW. IS IT SO??
BUT THEN WHAT IS THE USE OF FORBIDDING "GOODS MOVEMENT".
ANS 3-- I KNOW WHAT U HAD REPLIED WITH. BUT I WANT THE MEANING OF ALL
BUSINESS TRANSACTIONS
REGARDS,
MHP -
User status for Service Issue{for particular Sales order} in CRM
Hi Experts,
I've an issue related to the User status in CRM.
I've a Sales Order and I'm creating a service issue for it in CRM.
For the service issue number has some user status and I want to know from where it is coming.
Is there any configuration involved in it, or is it coming from the standard coding part.
Please let me know how to find the user status for a service issue.
Thanks
SubbuThank you PePe,
I'm asking about the user status not the system status.
The user status has only the values{open, worked & closed}.
now for a service issue if it is rejected then the user status are automatically changed into "Closed".
So if you have any idea in this please help me.
thanks
Subbu
Maybe you are looking for
-
According to vendor opening and closing
hi group i want to find opening and closing quantities according to the vendor and movement types. now here i am taking the data from mkpf and mseg. when the user enters a date for eg : user enters 20.10.2004 then to find the closing i am taking all
-
Please help! I cannot figure out how to get the computer to stay on!
-
Problem in tagging the object to Transport Request
Hello Experts, I have installed 0FISCVARNT using BI Content, but when i try to change the package of the standard object and save it under TR, it is not allowing me to change the package from local class. Please provide me any suggestions, if you hav
-
How do I save video attachments in gmail app on ipad?
I am using the gmail app on my ipad and cannot figure out how to save a .mov video (or any other format for that matter) that is attached to a gmail email message. When I tap and hold the video attachment icon I only get the option to save, add to re
-
In Time Capsule, How do you restore safari?
One of my bookmark links is corrupted. When I go to this website, it closes all of my open Safari pages. I am trying to restore the original Safari "Popuar" bookmark folder. Can anyone point me in the right direction?