User status for investment order to block settlement to final asset

Hi,
I try to set up a user status to avoid user to settle internal/ investment order to final asset. I cannot find a user status that will let me make the distinction between the automatic settlement to AuC and the partial or full settlement to final asset.
The process we are using is that we do automatic settlement from investment order to AuC on a weekly basis and as soon as the final asset has been entered via KOB5 (distribution of line item) we would like to setlle it.
Do you know a way to set up a user status on an internal order to allow settlement to Asset under construction but not to final asset?
Thanks
Sabine

Hi,
I do not want to send the costs directly to final asset. Costs booked against the investment order should always first go to AuC and then to final asset. What we try to avoid is to have the 2 settlements immediately one after the other. We would like to have the settlement to AuC on a weekly basis and the other one only when capitalization is required. But if the final asset is already entered in the settlement rule of the order via KOB5, then there is a risk to settle to final asset. We would like to only run the second type of settlement only when the asset is ready to be capitalized. To be able to do that we thought about using the user status. For example, if status is "release", we could settle to Auc but not to final asset and if status is "approved", we could settle to final asset.
Do you see what I mean? I need a status that allows me to perform some transactions and another one that allows me some other business transactions. The problem is that the 2 settlements I am talking about are not recognized as business transaction but as processing type.
Any ideas?
Thanks
Sabine
Edited by: Sabine Janssen on Oct 14, 2009 10:46 AM

Similar Messages

Activation of User status for Prod. order

Hi,
I have created a status profile with a status as a user status for production order. Now the thing is how to activate this user status for a specific transaction.
the requirement is after settlement the user status should get activated for production order.
Regards
Amit Parkhi

Hi Amit,
As told by Ajay , after assigning Status Profile in OPJH you can assign User Status to production order as below:
Pls. go through the following procedure for activating the User Status :
Activating User Statuses
Use
You can activate a user status at order header and at operation level.
Procedure
Order Header Level
Go to the order header.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Operation Level
Go to the operation overview.
Select the operation in question.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Pls. follow the above procedure as per rquirement and set user status accodingly.
Pls. revert if any doubt and reward if useful.
Regards,
Tejas
Edited by: Tejas Pujara on Jun 23, 2008 8:10 AM
Edited by: Tejas Pujara on Jun 23, 2008 8:11 AM

User Status for process orders

Dear Experts,
We are using user statuses for process orders & with this we are resricting or allowing certain business transactions.
My question is can we automatically set the two consecutive user statuses ?
Means when the GR for process order is done i have set the user status as GR.
Next user status is CLSD.
So after completing the closing of process order by settlement transactions can i set the staus as CLSD automatic?
I am trying to do it but i am getting error as-
"Status CLSD is not allowed (ACT 30000292 0010)"
Your help is highly appriciated
Regards
Vivek

Hi,
1) Still your order is carrying cost, it has not settled properly
2) you can check in CO02 itself, Go to tool bar at top
3) here Go to > Costs > Analysis & check whether order is set to Zero
4) you can check in KKBC_ORD also
Also, pls refer below link
Re: HOW automatic order status change to CLSD
regards,
Sankaran

User Status for PM Order

Hi everybody,
I have created a user status for PM orders. the problem is when Order status in CNF ( confirmed ) and I use IW45 to cancel confirmation, the user status doesn't change to Release and still remain CNF. I couldn't find any business transaction for that.
what do you do for such case?
thanks in advance

Hi Daniel,
I doubt that some communication gap is going on.
System Status
- An Order with status TECO CNF ... converts to REL CNF ... when the TECO cancels.
- This status further changes to REL PCNF when you cancel any Operation Confirmation (IW45).
- Similarly TECO PCNF also possible.
If I remember correctly, you were asking about User Status trigger upon change of System Status,
If you agree with the very 1st line of this post, you may start a fresh by explaining the requirements again, if possible more clearly. The probability for fresh thinking and responding from forum would increase.
Best wishes
Jogeswara Rao K

Set User-status for PP order

Hi All,
How can I set the user-status for a PP order, also let me know which user exit suits this requirement, as I know I have to make use of a FM or a BAPI which sets the user-status in the user-exit somewhere.
Thanks
Mark

Hi,
Try the following enhancements/exits for setting the status for PP order.
STATTEXT
CCOWB001
COIB0001
Regards,
Anji

Extracting User Status for Sales Orders

I am trying to extract user status transactional data for sales orders (at both the header and item level). I have been following SAP note 300300 to configure the status extractors and map the BW objects to sales order status data sources (2LIS_11_VASTH & 2LIS_11_VASTI). I think I have set up both R/3 and BW correctly according to note 300300 and the IMG documentation, but I am not getting any values in the info source for the new user status info objects, when I run the extract.
Has anyone successfully done this? If so, do you have any documentation or pointers on how I can get this to work? Or, am I better off creating a generic extractor? Thanks for your consideration.
Sincerely, Hashi Chakravarty

Hello Ravi,
well yes, I can derive the status for that order in the update rules if i show the status as an attribute of the 0pm_order; but basically there will be only the last status shown.
My problem:
a. i report on day 1, the status of the order is REL
b. on day 2 i load the master data for the orders, new status is TECO
c. on day three i want to report in the past and see the status of day 1; that's not possible in this scenario because i'll see the current status (TECO).
So that's why I want to have the statuses in the cube...
The 2lis_17_i3hdr extractor is only sensitive to CRT and TECO statuses, but not to the others (like REL / BLC and so on... :_(( )
I could read the statuses from the JEST and TJ02T tables...but still, if a document status is changed, no delta record is written in the queue...
Thanks,
Tudor

User status for production order

From which table i can get the USER STATUS for a production order?

Hi
Use the TableS:
JEST - Pass OBJNR of the Production ORDER (AUFK, AFKO tables)
or from
TJ02
TJ02T
reard if useful
regards,
Anji

Maintain User Status for Maintenance Order

Hi,
I want to maintain User Status along with System Status. For that i have created a user profile for Maintenance and can view and modifiy define user statuses on the Maintenance Order. I have define following three statuses.
- Created
- Released
- Completed
Initially "Created" status is set on the Maintenance Order but so far i am unable to configure system to automatically change the status into "Released" when the order released and change it to "Completed" when the order is tech completed.
In short, how to link business transactions with the User defined statuses?
Regards,
Shah

Hi,
Thanks Dhavan, it was really helpful..
My requirement was to have a report on Maintenance order in terms of only three statuses "Created" , "In progress" and "Completed" to have a Pie Chart view of maintenance orders. The problem i was facing was that System Status shows multiple statuses depending upon the sequence of the business transactions conducted on the maintenance order and ultimately it ends up creating serveral statuses depending upon the sequence of actions performed on the order. That is why i opted to go for User Defined Statuses. And i linked those statuses with my Business Transactions i.e. like whenever i Release the order it automatically sets my User Status to "In Progress" and now i can have the report as per my requirement.
Regards
Shah

User status for crm order in bw

Hello
There is a customized status profile in crm for sales orders.
I'm using extractor 0crm_order_i for loading orders into bw.
How can I get this user status in the data source through sbiw customization ?
Thanks,
Rita Arkin

If you want to extract additional fields, you need to extend the
corresponding extract structure and possibly the communication
structure, fill the field with the user exit EXIT_SAPLRSAP_001,
etc.
Also, you will find additional information about such enhancments in:
http://service.sap.com/bi
> Documentation
> Business Content Documentation
> Extracting Sales and Distribution Transaction Data - vers. 2
Chapter 7 of this document provides further information about the
enhancement of extract structures.
See transaction RSA5
Colin

User status in sales orders

Hi all!
Can anyone tell me if there is a way to control the possibility of changing a sales order through the status?
I wanted that when a sales order reaches a certain user status, for it to be blocked to modifications, as if it was display only...
Thanks!!!
Best Regards,
Carina Maeiro

Hi Carina,
Requirement is strange, but still may be possible,.
Can you give some more info like..
1. all the users have to be blocked or only particular user?
2. what wud be the next flow processing of tht order ? like after blocking what you wanna do ? want to raise a message or ?
Some Work arounds for the above 2 scenarios wud be.....
1. if a set of users have to be blocked, its very much possible thru customization like, you can define status Authorization keys in Status Management in SPRO where u will be setting the auth key for the user profile
2. if you want to just block the user not to go ahead i e atleast he shudnt save the order, you can implement CRM_ORDER_STATUS Badi in which you have to raise a error message on the application log saying tht it cannot be saved for so and so reason
if this solves..coool ....if not tell me the exact scenario ..
Siva

How to get system status and user status of service order

Hi,
I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
Regards,
Kamesh Bathla

Hi,
Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
Regards
Srinu

PCNF status for Service order

Hello Experts,
On Service scenario, I want not to proceed sales order if the system status of the service order PCNF (Partially confirmed)..... Is there any configuration path to do this?
Best Regards,
Amr

I hope you want to restrict sales order creation. There are 2 ways to restrict.
1. Using User Status for Service Orders
Create one user status profile in OIBS by having object type as Maintenance Order. Define one user status as PCN1. Double click that user status. Click create button in Business transaction & go to Partially confirm order option and select Set option. Then go to Create Sales document & select the option as Forbidden.
Assign that User status profile to your order type in OIOG.
2. Using System status
Its not recommended as it may affect other transactions & may create inconsistency.

User exit for Production Order status

Hi all ,
Pl tell me about the : user exit for Production Order status
( i want CLSD status after settlement of the Production order .)
regards,

Hi,
for production order you have exits PPCO0001 - PPCO0023. In transaction SMOD you can see the documentation for all this exits. Actually I think exit PPCO0007 could be a possiblity for you. This exit is called by saving the order.
But maybe it would be better for you to use a special status profile? A user status is set if settlement status is set.
Also BADI WORKORDER_UPDATE could be interessting for you.
Regards,
Sabine

Need help on to set User status for Operations in Maintenance order

Hi experts,
i am new to PM module.
i need to do BDC for IW31. i want to know some inforamtion
on user status for each opertaion.
my problem is ,, what is user status.
why it is saying order is not yet released when saving and status can not set.
in this cases how can i do BDC.

User status are something set in the configuration and specific to the company which SAP hasn't given in the system status.
May be in your system user status are configured to set only after the release of the order.
For doing the userstatus you may need to release the order, you can release the order thru bdc and then do bdc for user status. Also see below link
http://www.sap-img.com/plant/user-status-set-date-in-maintenance-order.htm

LSMW for changing user status on work order(IW32)

Hi All,
I have created a LSMW for changing user status on work order using transaction IW32. It does not change the status when i run the LSMW. In the recording for the LSMW, i select the radio button on the user status i want to select.
When i run the LSMW in the foreground, it does everything except select the correct status.
Is there a way to fix this or is it a problem with LSMW. I'm using ECC6
Kind Regards
Emanuel

Hi ,
I am not sure whether it would work with LSMW but if your on ECC 6.00 ,Enhacement Pack 3 then you have BADIs which allow you to make collective status changes in IW38 .The below are those BADIs :-
BADI_EAM_RIAUFK20_FCODE_CUS1 :Implement Customer Function Code in Order List
BADI_EAM_RIAUFK20_FCODE_SAP1 :Implement SAP Function Code in Order List
Else if your on lower version then write up a batch programme which checks the PM Order types with specific status and sets user status using FM STATUS_CHANGE_EXTERN[This is used to set or delete User Status] in SE37 ..
regrds
pushpa

User status for investment order to block settlement to final asset

Similar Messages

Maybe you are looking for