User status for quality notification

Hi All,
from which table we can get user status for a particular notification which is active status.
Thanks in advance

Hi,
You need to get the OBJNR(object number) for the notifications and then use the FM: STATUS_READ.
This FM will give you list of all the status or only active status( Set ONLY_ACTIVE = X in FM)..
Hope this helps
Regards
Shiva

Similar Messages

Set a User Status for Quality Notifications only if they are "Activated".

Hello experts:
I need to be able to set a User Status for Quality Notifications only if they are "Activated".
When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification". Initially, the only difference between the inactive "Defect Notification" and the active "Quality Notification" is that the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
I checked the business rules for status DEFR and found that the following processes clear this status
PMM1 - Postpone Notification
PMM2 - Put Notification In Process
PMM3 - Assign Order
PMM6 - Put Notification In Process Again
Any Ideas ?

Perhaps some additional information would help you understand what I need to do.
For notification type F3, we are recording all defects found in production.
Most of these are expected defects that result in a minor reduction in yield.
For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
When this happens we manually activate the notification and assign tasks to find and correct the cause.
It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing. I therefore want to use the Activation event as the trigger to set my user status.

Update System Status for Quality Notification

I have a program that completes a Quality Notification.
I would like to know if there is a bapi, badi or function module to change the system status before I complete the notification. When I click on the icon in the notification to complete it, a pop up box comes up to change the status to NOTI or NOTE. I would like to do the same in my program before I complete it.
Any help would be appreciated.
Marianne

Hi,
You need to get the OBJNR(object number) for the notifications and then use the FM: STATUS_READ.
This FM will give you list of all the status or only active status( Set ONLY_ACTIVE = X in FM)..
Hope this helps
Regards
Shiva

User status for Notification and Work order

We generate Service Notification IW26. I have already configured user status like PMND (Planning order not done), AWOP (Awaiting ordered parts) etc. in the Work order a while ago. Now the user wants same User status to the Notification as well. I like to know from experts what is the value added to have the same user status for both Notification and Work Order?
Do you have any suggestions?

Hey Chandra,
The customer intent behind this requirement must be to check in reporting / List Display Transaction about the Order Status. If they want to know looking at a Pending Notification List about the Order Status, you can always provide similar report using SAP Query Builder or with help of your Developer.
Apart from that If the Requirement is to have these User Statuses in Notification itself, Please advice them that it will be extra activity while performing transaction.
I dont see any other benefit of having User Statuses added to Notification as well.
Do let me know if you have some more info on Why Customer is requesting this....
Regards,
Avi

User statuses for equipment,functional location,order,notification

Kindly suggest me which user statuses should be assigned to equipment,func. location,notification & order.
Regards,
Vivek

Vivek,
There is no rule or std instruction which user status to be assinged to equipment,FL, Notification or order. In std you may get some user status for equipment. notification etc. It doesnt mean that you should use it. User status are define /created base on the business requirement . a user status can be assigned to multiple object type such as equipment, notification ,order etc.
You can refer the std user status profile when you create your own. In order to know the detail of it object type. You can select the status profile >> click on the detail>> click on the object types.
Hope it is helpful to you.
if you want further detail please revert.
DP

User status for Notification

Hi all, I want to change the user status NOCO(Notification completed) for M2 type of notification in the Quality client.I did it in Dev client for M2(Break down Notn) and imported the TR to Quality.When i try to assign this status in Quality client, the system is throwing an error as follows.
Status NOCO is not allowed (QNF 10039901). Solution please.Also provide the path in SPRO.
Thanks in advance,
Venu.

Have you completed all of the tasks in the notification. Has the Notification the following system status : ATCO ,
If not, you would not be able to complete the Notification. Try Completing all the tasks and then mark the Notification as Complete.
If you have defined any user status to be NOCO, then check that whether in the User status profile, against the current user status of the Notification, the lowest and Highest columns allow the NOCO status or not. Include the status number for NOCO against the current user status. This would solve the problem.
Path for User Status Profile Creation and Assignment:
SPRO>Plant Maintenance and Customer Service>maintenance and Service Notifications>Notification Processing>User Status For Notifications-->Define Status Profile
Edited by: Usman Kahoot on Jun 1, 2010 5:19 PM

Electronic signatures for Quality Notifications

We are on 4.0b system and thinking of implementing electronic signatures functionality for quality notifications. Since SAP standard does not have this functionality we are planning to use Enhancement QQMA0014, function module exit EXIT_SAPMIWO0_020.
To this effect, we are requesting your guidance for the following
1.Is this customer exit available in latest version of SAP ?
2. If we store these signatures (user id , date and time) in an custom table, can we move this custom table ,once we upgrade to a higher version.
3. Is there any other way to implement electronic signatures for quality notifications in version 4.0b.

Hi Isabelle,
Thanks for your patience in understanding my question.
My primary worry is if i use this exit to have electronic signatures in 4.0b and i know this functionality (Electronic signatures) is standard in latest versions, what will happen to the electronic signature data that i create until i upgrade.
The electronic signature data is the user id , date and time associated with a notification. I plan to store this in a custom table.
I will appreciate , if you can share with me your analysis.
Thanks
Manoj Jain

Restricting authobject I_QMEL for Quality notifications and HR PCRs

Hello,
We have encountered an role conflict when the authorization object I_QMEL is used both for Quality notification and HR PCR access on the portal. Here is the scenario.
Quality Administrator has I_QMEL for:
- notification type X
- transaction IQS1 and IQS2
- all work is done in the GUI
Employee who is a Manager has I_QMEL for:
- notification type Z
- transactions IQS1 and IQS2
- all work is done on the portal
The role conflict arises when one user has both the Quality Administrator role and the Manage role. The user can then use the GUI to view notifications of type Z - that any manager has submitted. This means the user can view all personnel change requests in the systems. These PCRs contain sensitive information.
Any ideas on how I can design the security such that this role conflict is suppressed?
Thanks!

Hi Vicky,
I have the same problems you had. I also need to implement your requirements 2) and 3)
How have you solved your requirements? Please let me know your solutions.
Thanks in advance
Sarah

MB56 for quality notifications?

Hi all,
is there a possibility to see quality notifications for substream materials which were consumed for production of a finished good? I mean a kind of MB56 for quality notifications.You enter the finished goods material and batch and see if there were notifications for a material which was used to produce the finished good?
Does this exist somewhere in the R3 - system?
Thank you for your help!
Alex

Hi Isabelle,
Thanks for your patience in understanding my question.
My primary worry is if i use this exit to have electronic signatures in 4.0b and i know this functionality (Electronic signatures) is standard in latest versions, what will happen to the electronic signature data that i create until i upgrade.
The electronic signature data is the user id , date and time associated with a notification. I plan to store this in a custom table.
I will appreciate , if you can share with me your analysis.
Thanks
Manoj Jain

Need help on to set User status for Operations in Maintenance order

Hi experts,
i am new to PM module.
i need to do BDC for IW31. i want to know some inforamtion
on user status for each opertaion.
my problem is ,, what is user status.
why it is saying order is not yet released when saving and status can not set.
in this cases how can i do BDC.

User status are something set in the configuration and specific to the company which SAP hasn't given in the system status.
May be in your system user status are configured to set only after the release of the order.
For doing the userstatus you may need to release the order, you can release the order thru bdc and then do bdc for user status. Also see below link
http://www.sap-img.com/plant/user-status-set-date-in-maintenance-order.htm

User status for component item in service order (plant maintenance order)

Dear experts,
I cannot find the customizing for assigning a user status (profile) to a component item of a service order.
IW31 - tab components - mark an entry - click on button "component status"
Can you help me?
Best Regards,
Philipp

OSS message created. Answer from SAP:
11.02.2011 - 15:04:46 CET - Antwort von SAP
Hello Mr. Miller,
user status for components are not possible and not intended. I'm
sorry that I cannot provide better news.
Best regards
Reinhard Gruber
Senior Support Consultant
AGS Primary Support,
Business Suite & Technology
SAP AG
Therefore this message is closed... but not yet answered
Edited by: Philipp Miller on Feb 11, 2011 3:28 PM

Set User-status for PP order

Hi All,
How can I set the user-status for a PP order, also let me know which user exit suits this requirement, as I know I have to make use of a FM or a BAPI which sets the user-status in the user-exit somewhere.
Thanks
Mark

Hi,
Try the following enhancements/exits for setting the status for PP order.
STATTEXT
CCOWB001
COIB0001
Regards,
Anji

U00BFMultiple user status for WBS Element?

Hello,
I need to create multiple user status for a WBS element.
I'm using the BAPI: BAPI_BUS2054_SET_STATUS
CALL FUNCTION 'BAPI_BUS2054_SET_STATUS'
     Importing
       return = ls_returnbapi1
    TABLES
I_WBS_SYSTEM_STATUS =
        i_wbs_user_status = it_wbs_user_status"--> This table contais 2 record, with the same WBS elements and diferent status
       e_result = it_result.
I put several rows (two) in the table it_wbs_user_status., I put two rows, the WBS elements for the same item with two different status, but I get error because it says that the WBS element is repeated.
¿Can you have multiple user status for the same element PEP? I try it in the transaction CJ20N too, and I don't Know.
Thanks.

In transaction CJ20N you can change user status for each WBS elements.
Menu --> Edit --> Status --> User Status --> you can choise betwen "Set" or "Set & Pass On".
I want BAPI, function , etc.... that do the same thar "Set" , not "Set & Pass On".
BAPI_BUS2054_SET_STATUS = "Set & Pass On"
Thanks

Activation of User status for Prod. order

Hi,
I have created a status profile with a status as a user status for production order. Now the thing is how to activate this user status for a specific transaction.
the requirement is after settlement the user status should get activated for production order.
Regards
Amit Parkhi

Hi Amit,
As told by Ajay , after assigning Status Profile in OPJH you can assign User Status to production order as below:
Pls. go through the following procedure for activating the User Status :
Activating User Statuses
Use
You can activate a user status at order header and at operation level.
Procedure
Order Header Level
Go to the order header.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Operation Level
Go to the operation overview.
Select the operation in question.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Pls. follow the above procedure as per rquirement and set user status accodingly.
Pls. revert if any doubt and reward if useful.
Regards,
Tejas
Edited by: Tejas Pujara on Jun 23, 2008 8:10 AM
Edited by: Tejas Pujara on Jun 23, 2008 8:11 AM

User Status for process orders

Dear Experts,
We are using user statuses for process orders & with this we are resricting or allowing certain business transactions.
My question is can we automatically set the two consecutive user statuses ?
Means when the GR for process order is done i have set the user status as GR.
Next user status is CLSD.
So after completing the closing of process order by settlement transactions can i set the staus as CLSD automatic?
I am trying to do it but i am getting error as-
"Status CLSD is not allowed (ACT 30000292 0010)"
Your help is highly appriciated
Regards
Vivek

Hi,
1) Still your order is carrying cost, it has not settled properly
2) you can check in CO02 itself, Go to tool bar at top
3) here Go to > Costs > Analysis & check whether order is set to Zero
4) you can check in KKBC_ORD also
Also, pls refer below link
Re: HOW automatic order status change to CLSD
regards,
Sankaran

User status for quality notification

Similar Messages

Maybe you are looking for