User Status LKD is active(ORDTMC1001)

Hi,
While doing capital purchase order through internal order a message is being appeard as "User status LKD is active(ORDTMC1001).
What could be the possible solution ?
Best Regards,
Samrat Roy

Dear Waman,
Whenever I create new Internal Order user status shows PLIM and LKD under Control Data of Internal Order master. Go to Set / Reset and uncheck the tick from status LKD and save the record. Why this status become locked i.e, LKD automatically in every internal order creation ? How it can be removed and during creation of new internal order user status will show only "PLIM". What should be the actual status of Status Profile for Internal Order ?
Best Regards,
Samrat Roy

Similar Messages

  • "System status AALK is active" and "System status LKD is active" errors

    Hi,
    We are on SRM 4.0.  When creating a shopping cart from a specific catalog the user is receiving two error messages.
    "System status AALK is active"    and    "System status LKD is active"
    How do I resolve these errors?

    It's more like a  CA-JVA-JVA-PP or PS-ST-INT-BAPI issue, recommend to report a message under one of the component.

  • System status LKD is active

    Hi gurus,
    My client wants to process a Purch order from a Preq. But when he wants to save his PO, he got this error message : SYSTEM STATUS LKD IS ACTIVE (ORD 9XXXXXXX).
    Please advice
    regards
    Edited by: Patrick Konan-Messou on Apr 10, 2008 3:54 PM

    It also depends how your orders are being generated.  If you are generating the orders from a sales order line item and a user deletes the line item or rejects it, the service order will automatically be locked from further processing.  The action log will display the end users name as the one who locked the order, but the transaction code will be VA02.

  • System Status LKd is Active( Ord 4257568)

    Hi,
    I am doing dsettlement of an PM order with transaction  KO8G, but by one order I get an error message " System Status LKd is Active( Ord 4257568)
    How to tackle this?
    Thansk
    Br,
    akkshaya

    It also depends how your orders are being generated.  If you are generating the orders from a sales order line item and a user deletes the line item or rejects it, the service order will automatically be locked from further processing.  The action log will display the end users name as the one who locked the order, but the transaction code will be VA02.

  • User status SAGI is active (EQU 10030745)

    Hi All,
    User has created one Delivery. And when a particular serial number is assigned to the material of the delivery document, we get the below error message in a popup window.
    1. User status SAGI is active (EQU 10030745) (Error message)
    2. System status ECUS is active (EQU 10030745) (Warning)
    3. Serial number 452600 cannot be used here (Error)
    when i click on the help icon, it says
    Diagnosis
    For object EQU 10030745 user status SAGI (Serial no assigned GI) is active.  According to this status, transaction 'Delivery note assignment' is not allowed.
    Procedure
    You can only carry out the requested function if this is allowed according to the status of the object.
    How do I need to resolve this issue? Awaiting for your valueble suggestions.
    Cheers.
    Anil.

    Dear Waman,
    Whenever I create new Internal Order user status shows PLIM and LKD under Control Data of Internal Order master. Go to Set / Reset and uncheck the tick from status LKD and save the record. Why this status become locked i.e, LKD automatically in every internal order creation ? How it can be removed and during creation of new internal order user status will show only "PLIM". What should be the actual status of Status Profile for Internal Order ?
    Best Regards,
    Samrat Roy

  • Urgent: error: user status ECUS is active for equipment.

    Gurus,
    My material is assigned to only one serial no. and one equipment.
    I am trying to do pgi from va02 and the system is throwing an error saying ' user status ecus is active for equip.' but in iq02 when we check the ecus status is not active. infact when we change the user status to anything the error thrown is still the same. Kindly reply urgently as this is affecting the clients production process.
    Thanks,
    Anand.

    hi
    i think once you have delivered the material ,it will create the equipment master record record stating the status as installed at customer site,
    the status you have said i think is user status ,if so kindly change the user status and proceed with the above said procedure
    revert back with any further queries
    regards
    thyagarajan

  • Error: User Status OUTS is active

    When using IW42 to enter completion comments on a work order, I enter the work order number and green check it.  If the work order does not have an underlying notification, I get a 'User status OUTS is active (QNF #1)' error (actually, two identical errors are displayed).
    Any ideas?
    David Macindoe

    Paul, Naresh,
    I got it.  My default notification type was set to M2.  In my organization an M2 notification is created with an OUTS user status set and the notification must be "approved" (user status set to APPR) before further processing can be done.
    M3 notifications have no such user status restrictions to deal with  They're created and the user is off and running.
    With my default notification type set to M2, IW42 couldn't get past the user status restrictions.
    We tell users to set their default notification type to M3.  I'm not sure how mine got set to M2.
    I appreciate both of your help.  You zeroed me in on the real issue.
    Thanks again!
    David

  • Error: "User status Z5 is active (ORD 300761)?"

    Hi
    Experts,
    While Iam doing ME21N an error occurs, even though while I want to change the Budget Amount in KO22, it is not allowing due to below error, I checked KO02, KO22,
    User status Z5 is active (ORD 300761)
    Message no. BS014
    Diagnosis
    For object ORD 300761 user status Z5 (Technically Complete (IO)) is active.  According to this status, transaction 'Budgeting' is not allowed.
    Procedure
    You can only carry out the requested function if this is allowed according to the status of the object.
    Thanks,
    Anil

    Hi Anil,
    It seems like you dont have authorisation to change the status.
    Please check with your BASIS person, he may provide you the required authorisation.
    As soon as you got the authorisation message, type immidiatly ?NSU53 in transaction code field and ENTER.
    You will now get the information regarding roles, which will be helpful to BASIS people for tracking authorisation for you.
    Regards,
    Srinu

  • System status LKD  is active while doing ME21N

    Hi,
    While doing ME21N transaction system showing
    "Error: System status LKD is active ( ORD 300303)"
    Thanks and Regards
    SK

    Hi,
    First of all ,please make sure if the status lkd is already exist for
    the orders in koko4.If that's the case it is necessary to revoke the
    status LKD on these orders e.g. with transaction KO02.
    Best Regards,
    Arminda Jack

  • Getting Error User Status DPND is active

    Hi Experts,
    I am getting error User Status DPND is active ,  during saving User Decision.
    I am getting this error only If i am doing Defect recording in QE01.
    Without Defect Recording there is no error ....
    Plz let me know what is this error & how to resolve it ?
    Warm Regards,
    Dheeraj Sharma

    Hi Dheeraj,
    With Defect recording, system creates Q Notification based on the Notification type assignment to the
    Inspection Type in Config step QM>QN >Defects recording
    This assignment is at client level, not advisable to change
    There is one more setting at Defect Class level, (You assign Defect class for Defect code while creating catalog Type 9) In defect class if you uncheck "Activate Q-Notification" in the "Next fuctions in results recording section" system will still genrate QN but will not be activated
    QM>QP>Basic Data>Catalog>Define Defect class
    This Notification will be Automatically closed, while UD
    For existing Notifications already created while DR , you can go to QM02
    Select the item created, go to Task, create new Task and Mark that task as complete, the status of the notification will change to ATCO , complete the UD after this, it will mark the QN status to NOCO and complete stock posting
    Thanks
    DD

  • User status erof is active (ORD 900000000000)

    HI All,
    I am getting the following error message when try to do actual settlement for production orders at CO88.
    "User status erof is active (ORD 900000000000)"
    Could anyone tell me what happend and What should i do to fix it ??
    Thanks & Regards,
    Manju

    Hi,
    Obviously in your system you are using user statuses in production orders.
    I don't know this specific "erof" status, since it is particulary defined in your system only.
    Via user statuses we can control the processing flow of production orders, in a specific way. In your case this status is defined in such a way that it will not allow settlement.
    The simplest way out is to edit the order and manually change this status, if this is not disabled by the same status!
    Regards,
    Mario

  • User status teco is active

    When the user try to post an Idoc (Order creation)  to SAP it didnt get posted as the error message was "user status tech is still active"
    I am completely unaware about this status teco . Can some one explain what does the status teco means and how to rectify the above mentioned error
    Thanks & Regards,
    Rahul

    hmm... i think you used the wrong forum. The order you mentioned, is a production order (tcodes CO01, CO02, CO03) i guess?
    So, in general, TECO means "technically completed", i.e. that production order stopped because of some reasons without full completion of the order.
    Maybe, the following topic is useful for you:
    [preventing changes in user status in PM order when TECO is active;
    regards
    Ralf

  • User status 10 is active (ORD 70111521)

    Diagnosis
    For object ORD 70111521 user status 10 (Opened) is active. According to this status, transaction 'Material purchase order' is not allowed.
    Procedure
    You can only carry out the requested function if this is allowed according to the status of the object.
    need help

    Use CO02 Change production order or CO03 Display production order
    there are two status One is system status which can be set only by the system internaly after performing certain events.
    another one is user status, which is set by the user manually after performing some actions.
    User Field comes next to System Status.
    for example in production order it comes next to system status bleow order and material number field in
    Production Order Display/Create/Change: Header Screen
    Configuration of User Status:
    Define Status profile - Tcode -- BS02
    Define Selection Profile - Tcode - BS42
    This is same in Maintenance Order.

  • USER STATUS at Activity Level

    I do have user status defined for Activity and it doesn't show up when i set the status. All i see is SYSTEM STATUS and not user status. To see user status i need to click the blue button (with I symbol) and then see it. Why is this happening like this?
    But at Network Header level & WBS level i see both USER STATUS & SYSTEM STATUS.
    Any info will be a great help

    Hi,
    I think WBS and Network are controlling objects in SAP. Activty is related to execution. This may be the reason why SAP has provide detailed ie user statuses at WBS and network level only.
    In my opinion you cant achieve this in standard SAP, you may have to for devlopment of customised screen. User exit CNEX0008 will help you.
    Regards

  • Activation of User status for Prod. order

    Hi,
    I have created a status profile with a status as a user status for production order. Now the thing is how to activate this user status for a specific transaction.
    the requirement is after settlement the user status should get activated for production order.
    Regards
    Amit Parkhi

    Hi Amit,
    As told by Ajay , after assigning Status Profile in OPJH you can assign User Status to production order as below:
    Pls. go through the following procedure for activating the User Status :
    Activating User Statuses
    Use
    You can activate a user status at order header and at operation level.
    Procedure
    Order Header Level
    Go to the order header.
    Choose .
    Choose Edit ® Direct entry.
    The system displays a dialog box in which you can select the permitted user statuses.
    Position the cursor on the required user status and choose Choose .
    Operation Level
    Go to the operation overview.
    Select the operation in question.
    Choose .
    Choose Edit ® Direct entry.
    The system displays a dialog box in which you can select the permitted user statuses.
    Position the cursor on the required user status and choose Choose .
    Pls. follow the above procedure as per rquirement and set user status accodingly.
    Pls. revert if any doubt and reward if useful.
    Regards,
    Tejas
    Edited by: Tejas  Pujara on Jun 23, 2008 8:10 AM
    Edited by: Tejas  Pujara on Jun 23, 2008 8:11 AM

Maybe you are looking for