User Status Profile not getting copied to Objects (ECM)

Dear Experts,
I Have created Change Type assign with Status Profile, This Profile is correctly appearing in Change NO (ECR),
In Header but After Selecting some of the Objects like, BOM or Material the Status Profile is not getting copied.
I have two level of Approvals required.
do am i missing something here...
Please suggest
Thanks
Regards
Raghu
Edited by: raghu m on Nov 12, 2009 10:34 AM

Closed!

Similar Messages

User Status Profile for an Installed Base

hello everybody!
I need your help! I want to assign a User Status for an Installed Base, Anybody knows what is the step by step for this?
I already have the User status profile, but i dont know where I can assign it into de Ibase.
I think is into this Dialog step but I'm not sure. This is SAP CRM 7.0.
Thank you so much for your help, regards!

Hi,
You need to add the below Object Types in your user status profile.
Go into your user status profile and click on the Object Types as highlighted below and then enable the list of object types. Then you will be able to see the status profile in the IBase header.
Enable these object types for IBase.
Allowed Object Types
General Object
Ibase Header
Product Master Data
Regards,
Siraj

Object Types in User Status profile for Investment managment

Is there any one who has idea about what object types should I select in User Status Profile for Investment management . this is very urgent .
Regards
Rama Shanker Sharma

Dear Ram,
User Status can be maintained in the system as foll
Maintain the Status Profile first in OK02
Status no       Status        Short text         Initial status flag    lowest    Highest
10                  NBU            Not Budgeted             ^                10          20
20                  BUD           Budgeted                                      10          20
in
Status
NBU
maintain the required fields as required by your process requirement
Material purchase order
Material purchase requisition
Partially release project
Release etc
and define each line item weather it should be No influence/Allowed/Warning/Forbidden/No Action/Set/Delete
Repeat the same logic for
Status
BUD
I hope this solves your problem, if not please write in detail your requirement.
Regards,
Vikat Verlekar

User status profile settings on WBS not working

Hello,
We have a User status profile on WBS element which has various statuses in it allowing different business transactions when that particular user status is set.
There is one user status NPC in that status profile which should disallow assignment or confirmation on maintenance work order. Now the status previous to NPC status allows assignment or confirmation of orders. So after a order is assigned to the WBS and the WBS user status is changed to NPC when we try to confirm order on this WBS in NPC status sytem allows order confirmation.
Why is system allowing this inspite of the status profile config says confirmation is disallowed in NPC status. I have checked the object types in the status profile config and maintenance order is also included in that but still its not working. Please help in solving this issue, its critical.

The business transactions disallowed under NPC status are as below,
Acct. Assignment order/Project
Actual activity Allocation
Assignment Order/WBS
Confirm Order
Goods Movement
Material Purchase Order
Material Purchase Requisition
Post Goods Issue
But orders can be assigned in the status before NPC, but once NPC is set system does not allow assignment of new orders which is correct. But system allows confirmation of already assigned orders. Please help we do not want any order confimation after NPC is set.

Adobe creative Cloud photshop cs 6 register user iam not getting COPY CSS options please help

iam adobe creative cloud photshop cs 6 register user iam not getting COPY CSS options even i have updated photoshop several times
still not getting this options please help
Thanks
Koushik

13.0.1 is the last version of Photoshop to run on Windows XP but it does not include the Copy CSS feature.
The Copy CSS feature was first introduced in Photoshop 13.1 (Cloud only) and higher.
http://blogs.adobe.com/jkost/2013/02/copy-css-attributes-in-photoshop-13-1.html
Photoshop 13.1 does not run on Windows XP. So your operating system is preventing you from upgrading Photoshop to 13.1+.
http://helpx.adobe.com/photoshop/kb/new-system-requirements-photoshop-131.html
If you plan to remain a Cloud member then you will have to upgrade to Windows 7 or Windows 8 (or get a new computer) very soon in order to run Photoshop CC to be released on June 17, 2013.

Status profile not allowed for object type

hi
i had created a status profile (for having 2 statuses before production order release) and assigned in the order type.
but while creating the production order i receive the following error.
Message no - CO622
status profile not allowed for object type
please provide your inputs
regards
Ramesh

Ramesh,
once you cerate a Status profile in BS02 and add status to the same. in the tollbar you will see OBJECT TYPE push button, select teh obejcts like PP/PM order header / operation /comepeoent and PRT ect where that staus can be applied.
Then assign the statsu profile to order type.

Bapi for Project User Status Profile

Hi,
Is there any bapi that contains the field "Status Profile (STSMA) of the Project? I only can find the WBS status...
Thanks in advance.
LM

Hi,
Thanks for your reply.
But this function is to get the status... The problem is when creating a project by BAPI, the "user status profile" field (STSMA) is not available to fill. In this case, it happens if we have 2 schemes for projects, the bapi only puts the first that appears and I want the 2nd one to be fullfilled.
How can we create a projet by bapi and have this field?
Thanks in advance,
LM

User status Profiles - Add new status

Hi Experts,
We're working in cProjects 4.0, and we want to customize the status profile for some objects in the project, trying to add a new status "in evaluation" between standard status "release" and "completed".
It is very important that you <b>cannot change to this status unless the item is released</b>. And we want to define that you can come back to the status only from defined statuses.
We tried to define that under customizing point "Create/Change User Status Profile" but we don't get to have the discrimination criteria just mentioned above.
Any help/hints on this?
Thanks in advance!!
Kind Regards,
Isabel

Isabel,
You should be able to accomplish this by setting them as below. You could set up the influence like the below
Created /initial - System status REL Disallowed
Released/Initial - System status Completed Disallowed
Released /inEvaluation - System status Completed Disallowed
Completed /InEvaluation - System status Completed allowed or No restriction
and set the Next action to No action.
By setting them as above When you are in create system status, you can only have the created/Initial User status active. In order to release the object the user will have to propogate to the Released /initial user status .
After the system status Release has been set, depending on the completion of your activity you can set the released/inevaluation user status.Only after you set this status can set the system status to complete.
Hope this helps.
Thanks
Narasimhan

Table for User Status Profile

hi
Please tell anybody what is the table for User Status Profile in Sales Orders? where it will stores?
Regards
Rajendra

Hi,
Use table JEST
Here you will have to enter the object number as an input field
Get object number from table VBAK or VBAP based on whether the status profile is attached at sales order header or at sales order item.
Status which is active will start with letter E and the status inactive flag will be blank.
Regards
Ravi

User Status Profile for Notification PM

Dear Masters,
I know the steps to create the user statuses and user status profile for notification but I want a brief description on maintaining the user statuses. Can i have any document that can explain me the user statuses.
Hope to find the reply soon. Thanks in advance.
Chin2

Hi Naveen,
Thanks for such a valuable reply, this document is very much helpful to me. See the below example i am showing for the status profile i have created
STATUS PROFILE: ZP-NOTIF
Status number        Status     description                                          Init      Lowest       Highest      position     priority
         1                    OPEN       Open Notification                                no        1                   1                 1               1
         2                    RUNG      Equip. Running Condition                    no         1                   2                1               1
         3                    NRUN      Non-Running Condition                       no         1                   2                1               1
         4                    CLSD      Closed                                                 no         1                   2                1               1
When I am trying to set the first status (OPEN) to the notification, it works fine but even after I am assigning the order to this notification, put notification in process, assign equipment I cannot set the next status (i.e., RUNG) it is showing me the following error:
"Status RUNG is not allowed (QNF 100000000000) " -> ->
Diagnosis
The user status 'RUNG' has reference number 02. In the current object status 'QNF 100000000000', the reference number of a status may not be higher than 01.
Procedure
You can only set user status whose reference number is not higher than 01.
please help me solving this question its a bit urgent.
Thanks once again for your replies.

New user status profile applied to existing transactions

Hello experts,
We have been live for nearly a year and a half with CRM service 5.0 and are now preparing to upgrade to 2007. A new requirement to manage transaction item status through authorizations (B_USERSTAT) has been introduced at contract item level. We have tens of thousands of existing line items in production, but a user status was never maintained for the associated item categories.
We can apply a new status profile to the relevant item category, but that seems to only be enabled in new transactions, not existing ones. Existing transactions are therefore not relevant for the new authorization settings in B_USERSTAT authorization object.
Does anyone know of a utility or means by which we can "refresh" existing business transactional data to reflect the new user status profile?
Your assistance is appreciated.
Allon

Hi robert,
I have requirement lilke this. In my case, i removed an existing user status 'Open' from the status profile for service ticket. it is reflecting in my new creating tickets..But existing all tickets have same status profiles (i.e) 'Open' is still there.. How to update the existing records???
regards
Logu

Incoterms are not getting copied at the item level

HI Gurus,
I have an sales order where If we change the Incoterms at the header level, its not getting copied at the line Items. Its giving an information mesage stating, Header Business Data does not apply to Item.
The Incoterms are intially getting copied from Customer master, but later I am not able to change it.
Please let me know what might be the reasons ? If possible Please let me know some User exits which needs to be checked.
Thanks,
Swathi

Check in VOV8 for your sale order type the following:-
a) If both Check Division and Item division are ticked, then system will pop up this message due to the fact that in the said sale order, the item division differs from header division
b) The field "ProdAttr.messages" should be blank
Next go to VOV7, select your item category and execute. There ensure that the box is ticked for "Business item". If this is unticked, then system will copy all header data to line item and you cannot change it.
thanks
G. Lakshmipathi

Condition record's not getting copied in local client copy !!!

Hi ALL,
I have a one question/doubt regarding local client copy.
Our functional team creates condition type (for e.g.: thru FV11 for MM) in one client (golden), when I take client copy of that client with SAP_All profile, but condition type is not getting copied in the new client.
I found for Sap notes, in one note it was suggested that change documents are not copied with any profiles.
I found in FV11, there is one option, Send Condition, thru which we can send by Logical systems, but its giving error msg u201CNo relevant partner system DEVCLNT300 exists for output category COND_A
Message no. VJ000u201D
Can u pls suggest proper way to copy/transport condition record in new client created?
Regards,
C Singh.

Please refer below link
http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm
Regards,
Pavan

AT USER COMMAND is not getting triggerd

Hi Techie's
I have two fields on the selection screen
1) Name:   ___________
2) Id:         ___________
I have some buttons say on the Application toolbar say::
Save            Delete            Modify           Exit
I have created these buttons in the INITIALIZATION event.
I am using AT Selection Screen OUTPUT for some logic purpose.
Later I am writing AT USER COMMAND and pressing SAVE The function code for SAVE is "SAV".
But the drama is that AT USER COMMAND is not getting triggered at all.
It goes first to Initialization--->At selection Screen OUTPUT>Then screen appears> I give the values and press the SAVE button--
again it goes to the At Selection screen OUTPUT.
Not even getting the hang of it. Please help if anybody know the story of it.
ITS SO URGENT.

At user command is for list processing, you need something like this:
Pushbuttons in the Application Toolbar
In the application toolbar of the standard GUI status of the selection screen, five pushbuttons are predefined with the function codes FC01 to FC05, but are inactive by default. You can activate them during the definition of the selection screen as follows:
SELECTION-SCREEN FUNCTION KEY i.
The numbering i must be between 1 and 5. The individual function texts must be assigned to the functxt_0i components of structure sscrfields before the selection screen is called. You must declare this structure as an interface work area using the TABLES statement.
If the user chooses one of these buttons, the runtime environment triggers the AT SELECTION-SCREEN event and the function code FC0i is placed into the component ucomm of the structure sscrfields.
After the AT SELECTION-SCREEN event has been processed, the system displays the selection screen again. The only way to exit the selection screen and carry on processing the program is to choose Execute (F8). Consequently, the pushbuttons on the application toolbar are more suitable for controlling dynamic modifications of the selection screen than for controlling the program flow.
REPORT demo_sel_screen_function_key.
TABLES sscrfields.
PARAMETERS: p_carrid TYPE s_carr_id,
            p_cityfr TYPE s_from_cit.
SELECTION-SCREEN: FUNCTION KEY 1,
                  FUNCTION KEY 2.
INITIALIZATION.
sscrfields-functxt_01 = 'LH'.
sscrfields-functxt_02 = 'UA'.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
      WHEN'FC01'.
      p_carrid = 'LH'.
      p_cityfr = 'Frankfurt'.
    WHEN 'FC02'.
      p_carrid = 'UA'.
      p_cityfr = 'Chicago'.
ENDCASE.
START-OF-SELECTION.
WRITE / 'START-OF-SELECTION'.
This defines a standard selection screen with two parameters. In the application toolbar, two pushbuttons are assigned the texts LH and UA and activated.
When the user clicks one of the buttons, the AT SELECTION-SCREEN event is triggered and there the input fields are preassigned correspondingly.

Enable User task is not getting triggered

Hi All
We have a provisioning workflow configured. "Enable User" task is not getting triggered while the user is enabled in OIM. Can anyone give a clue as to how to get it triggerd? Rest all the tasks are fine (Create, Disable, Delete, and other custom tasks)
Thanks,
Vinay

There is a OOTB scheduled Task "Enable After Start Date". once the user get enabled in OIM user profile. You have to run this task manually to have effect on corresponding RO for enablement. Else it will execute automatically as per scheduled time.
if the version of OIM is 11.1.1.5. There is an issue. update patch BP02. for same
--nayan

User Status Profile not getting copied to Objects (ECM)

Similar Messages

Maybe you are looking for