User status- when selected it logs date/time & User in Work Not. long text

Hello,
Is there a way when a user clicks on a user status on Work Notification the long text will be updated to date/time and username.
For example:
If we have 3 approval process: Supervisor Approved, Deputy Manager Approved,, and Manager Approved.
When the Supervior press the Supervior Approved (User Status and saves) the long text on the Work Notification will update with log of  time/date & user. Then the same for the next 2 approvals.
This will help us a lot.
Thanks,

Jay,
I really dont know why you guys need to update the long text when user status has been changed. You could simply trigger the email to the approver who needs to be notified. but anyway if this is your rqmt, I think you can do it thru field exit. Talk to ABAPer and get a help from him
Mahee

Similar Messages

  • Time is delayed by 10 minutes when you use Automatically Date & Time

    Time is delayed by 10 minutes when you use Automatically Date & Time in France

    It is not carrier as all my Apple products where up to 10 minutes fast. I had to reset each product to the correct time. I'm in New Zealand.

  • After Time Machine backs up my file vault files (after logging out), when I next log into the user account it beachballs permanently during log in.

    After Time Machine backs up my file vault files (after logging out), when I next log into the user account it beachballs permanently during log in.  The backup was successful, as I had to restore after this issue last time.  Hard resetting doesn't resolve the issue.  Is there a Time Machine setting that I should be aware of?
    I have 2011 13" MBP, 10.6.8 and use an external hard drive connected via USB for my Time Machine backups.
    Thanks

    I was able to get it to work.  Thanks for your help.  It's unfortunate the two applications do not work well together.  This is what I did:
    1) Safe boot and logged into the affected user (since the whole issue damaged the account's system settings).
    2) Turned off File Vault in System Preferences. I needed to make some space on the hard drive first since apparently the total free space on the hard drive has to equal or exceed the amount of data currently in the file vault.  I deleted some files and moved others to the Admin account.  This whole process took awhile.
    3) Finally, just restarted and logged in.  The next time machine backup seems to be a significant backup, I assume because it's backing up the user account in a different way now that File Vault is turned off.
    Thanks again!

  • My trackpad is not clicking on the user accounts when I am logging in. It works fine once I have clicked using the mouse

    My trackpad is not clicking on the user accounts when I am logging in. It works fine once I have logged into the user account using the mouse to select the user account I want to use.

    Hi klaus,
    It's running 10.9.1
    Any help would be much appreciated
    Thanks
    Scottie

  • User status & usage & Selection ID in recipe

    null
    Edited by: srinivasan Lakshmanana on Dec 18, 2009 1:40 PM
    Edited by: srinivasan Lakshmanana on Dec 18, 2009 1:41 PM

    Hi,
    You will get details of of the user who created the selection IDs   and date /time  details  from the database table   /SAPAPO/TS_SELKO   (Header Selection Variants) .
    You may create a simple query for this or an elaborate ABAP report.
    Regards
    Datta

  • Problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
    This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
    Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
    If iPhoto  is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
    http://www.apple.com/support/mac/app-store/contact/

  • Error when reading the access data(URL,user, password) for Adapter Engine

    Hi,
    We are getting this error in production system 
    "SXMBSysErrorAlerts, Category INTERNAL, Error code: AE_DETAILS_GET_ERROR error text: Error when reading the access data (URL, user, password) for the Adapter Engine".
    Please tell what can be the cause of error. Where are the access data (URL, user, password) for the Adapter Engine read from?
    Its urgent.  We are in support project.
    regards,
    john

    Hi jhon,
              please check the following threads to resolve the problem.
    AE_DETAILS_GET_ERROR
    Error : no_adapter_engine_found: Unable to find Adapter Engine
    regards
    mahesh.

  • I loaded microsoft office on my mac airbook. I have no problem accessing it from my user. When the other log on user is clicked the software icons are not avauilable. How do I have any user on my airbook have access. i.e. my wife

    I loaded microsoft office on my mac airbook. I have no problem accessing it from my user. When the other log on user is clicked the software icons are not avauilable. How do I have any user on my airbook have access ? . i.e. my wife

    Greetings Niel
    I was able to copy down the Word, Excel and PowerPoint icons and access "however" when I exit out of the guest user it deletes them from the tool tray at the bottom.... I need them to stay there not have to copy them down..
    Can you still assist?

  • Reinstalled 10.3.4, now date/time doesn't work or open

    I had a hard drive failure, a company replaced my drive with a new one in my G4. The new hard drive works fine, they reinstalled 10.3.4 from my original disks, but the date/time doesn't work and I can't open that panel even.
    So I just resinstalled from those disks again and it still didn't fix this problem.
    Also my old password for installers doesn't work either, but it lets me bypass it.
    Any suggestions?
    Should I just try upgrading to Tiger and see if that works?
    Thanks

    blackrhino:
    Not sure what the problem is, however, before you go reinstalling or upgrading try this:
    1. Reset PRAM.
    2. a. From a cold start, boot from your installer disk holding down the "C" button. Go to the Installer Menu and open Disk Utility.
    b. Select your Mac OS X startup disk.
    c. Select the First Aid tab in the Disk Utility window.
    d. Select Repair Disk button in Main panel. If problems are found run again and again until no problems are reported.
    e. Select the Repair Disk Permissions button on the First Aid tab.
    f. After Repair Disk Permissions completes, Quit (Command-Q) Disk Utility.
    3. Update Software to 10.3.9 (Go to Apple Menu and select Software Update.
    Post back after these operations.
    Good luck.
    cornelius
    PB G3 Pismo400, 100 GB 5400 Toshiba internal, 1 GB RAM   Mac OS X (10.3.9)   Beige G3 OS 8.6

  • Date modified of user profile can be considered as date the user last accessed the server?

    Hi,
    I have a terminal server with large number of old profiles.what is the Microsoft way to clear these?
    Is the last modified date of user profile can be considered as date the user last logged in to this server?
    Regards,
    Arun
    Best Regards, Arun http://whynotsql.blogspot.com/

    Hi Arun,
    For deleting old profiles please test the following group policy setting using gpedit.msc:
    Computer Configuration\ Administrative Templates\ System\ User Profiles\
    Delete user profiles older than a specified number of days on system restart     Enabled
    Delete user profiles older than (days)     30
    It is applicable to Windows Server 2008 and later.  You may need the following hotfix if you are running Server 2008 R2 (no SP1):
    http://support.microsoft.com/kb/983544
    Thanks.
    -TP

  • HT2284 Recurring "connection failed" when selecting TimeCapsule in the sidebar (internet connection works fine).  Clicking "Connect As" starts the cyle over again but ends in "There was a problem connection to the server" message.  Only fix is resetting T

    Recurring "connection failed" when selecting TimeCapsule in the sidebar (internet connection works fine).  Clicking "Connect As" starts the cyle over again but ends in "There was a problem connection to the server" message.  Only fix is resetting TC.
    The TC is the wifi base station, also have AirportExpress on the network, both of which work fine.  The TC has an external disc connected as well, which is also visible in the sidebar but also cannot be connected to.  Several MB computers use the network, all of which either can or cannot connect to the TC disc depending on when it is acting up.
    Any ideas other than clicking "connect as" or powering down the network every time? 

    Read up how to install 5.6 utility into ML.. it is pretty easy.
    I downloaded 5.6
    http://support.apple.com/kb/DL1482
    Download unpkg
    http://www.timdoug.com/unpkg/
    Open the dmg to get the pkg.. drag it onto unpkg.. and it will create a directory under desktop with all the files.. drag the application to the utility directory.. or just run it direct.
    Google if you want more explicit instructions.
    Much easier with a real tool instead of a toy.
    Hold the option key when you select firmware update.. all the old ones will appear.
    But this will not work on newer Gen4.. only on every other model and early Gen4. .I do not know when they turned the corner and started this only 7.6 nonsense.

  • TS1538 My Ipod 160GB Classic Hung. I connected and restored to factory settings. But later when I connected the data from I Tunes is not syncing at all. Please guide

    My Ipod 160GB Classic Hung. I connected and restored to factory settings. But later when I connected the data from I Tunes is not syncing at all. Please guide

    This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

  • WHen will  be Essbase 9.3 on WIndows 2003 not longer supported?

    When will ask Essbase 9.3 on Windows 2003 Note longer supported?

    I would say it's already the case ...
    Based on the "Oracle Support Lifetime Policy" the Premier and Extended support for Essbase 9.3 are already over, so now it's in "Sustaining Support": it just means it's not going nowhere else (no patch, no updates, nothing). But it will stay in that status forever .... So as long as you have licenses for your system you can continue to run Essbase 9.3 on your Windows 2003 server.
    Would probably be good to get in touch with your Oracle contact person to double check that.

  • I made a beautiful invitation for my sons graduation in pages it has 1 photo on the front and 5 photos on the back. When I try to export it to my work pc the text is not supported and it looks terrible. Help!

    I made a beautiful invitation for my sons graduation in pages it has 1 photo on the front and 5 photos on the back. When I try to export it to my work pc the text is not supported and it looks terrible. Help!

    How did you transfer it to the PC?
    Not good to export as a Word .doc/x, better to:
    Menu > Export > PDF
    Peter

  • Track production order ststes histry (Status change date, time, user)

    I want to track a production order status change history. Status change date, user name and status. Appreciate if somebody can give me a T Code, SAP report or a table.

    HI,
    You can see the the date, time and user for the status changes by following the menu path given by Mr. Mangalraj.
    However if you cant see them, then check the T Code OPL8 (for PP and COR4 for PI), implementation tab. Tick the check boxes for for Status Change Documents as your choice (for header, operations etc).
    After checking these boxes you will be able to see the status change details.
    Hope that helps.
    Regards,
    Rohit.

Maybe you are looking for