User Tracking delete interval
CM User Tracking delete interval what is the diff between "End Host Table" and " History Table "? also these option can't be set lower than "7" days? I want delete the entery more than 2 days old and I want to keep only the latest entery. but the number back to "7" days by itself. any idea? and what's exactly the diff between Major acqustion and minor acqustion? Thanks!
This works for me. I was able to set my delete interval down to two hours. Make sure the NMSROOT/campus/etc/cwsi/ut.properties file, and make sure casuser can write to this file. The property that controls the main UT end host aging is UTAgeTime.
A major acquisition looks at all devices in Campus and acquires all users connected to them. Minor acquisitions look at the devices that have changed since the last Campus Data Collection, and only collects end hosts from them.
Similar Messages
-
How to track the user who deleted the info object.
Dear Gurus,
In our BI system one info object has got deleted. If I need to track the user who has deleted that how can I track it(in which DBtable). And the complication is one user ID is being used by many people, in this case how can I track that from which machine the Info Object has been deleted(if there is any possibility to track the machines by IP address).
Kindly let me know if there is any procedure to find it out. Your help will be rewarded with a great honour.
Regards
Mohan KumarHi dear,
you have to go in SLG1 transaction, and then select
Object: RSD
Subobject: IOBJ_DEL
External ID: (put here the name of your deleted IO)
Then choose a time range...and voilà, you can find the user who deleted the IO...
Hope it helps!
Bye,
Roberto
About the IP...look at USR41 table, but I think it's a bit difficult fo find data referred to the past...
If you haven't activated logon auditing in SM19... -
Track of users for deleted query variants
Hello Gurus,
I would want to know if any particular transaction is there for tracking users who deleted the query variants. I might have to recreate few of them needed for development.
Thanks,
Kind Regards,
SunithaHi Sunitha,
I'm not sure if the technical content will help, I guess that activating the statistics and other technical content you can audit it, but, I think it will necessary turn on some function, unfortunately I don't know which one is necessary.
Will try to update the message how to do it.
Thanks,
Daniel -
Anonymous user tracking between EAR's
We have a requirement where we need to use Anonymous user tracking(AUT) across two EARS in the same domain. Currently AUT generates seperate user id as the user navigates between the two EARS. Is there any way to restrict creation of multiple user ids, when the user navigates between EARS?
ThanksThis works for me. I was able to set my delete interval down to two hours. Make sure the NMSROOT/campus/etc/cwsi/ut.properties file, and make sure casuser can write to this file. The property that controls the main UT end host aging is UTAgeTime.
A major acquisition looks at all devices in Campus and acquires all users connected to them. Minor acquisitions look at the devices that have changed since the last Campus Data Collection, and only collects end hosts from them. -
IPM and dynamic user tracking not running properly.
Hello, I've got two problems after a reinstallation of CiscoWorks LMS 3.2.
Versions of software components:
LMS-3.2
Campus Manager-5.2.1
CiscoView-6.1.9
CiscoWorks Assistant-1.2.0
CiscoWorks Common Services-3.3.0
Device Fault Manager-3.2.0
Integration Utility-1.9.0
Internetwork Performance Monitor-4.2.0
LMS Portal-1.2.0
Resource Manager Essentials-4.3.0
First probelm I have sounds pretty much like this thread:
https://supportforums.cisco.com/message/3064784#3064784
Source device is a WS-C3560-8PC - 12.2(55)SE1 - C3560-IPSERVICESK9-M
I configured a IPM collector, if I have a look at the "Collector Management" the collector is running and I can also monitor the running collector.
But if I have a look at the running config of the switch, there is no ip sla collector configuration but I can see the ip sla statistics via the show command.
#sh ip sla configuration 135123
IP SLAs, Infrastructure Engine-II.
Entry number: 135123
Owner: ipm|XXXS1077
Tag: QA-Site1-Site2
Type of operation to perform: udp-jitter
Target address/Source address: target ip address/source ip address
Target port/Source port: 2000/0
Type Of Service parameter: 0xB8
Operation timeout (milliseconds): 5000
Codec Type: g729a
Codec Number Of Packets: 1000
Codec Packet Size: 32
Codec Interval (milliseconds): 20
Advantage Factor: 12
Verify data: No
Vrf Name:
Control Packets: enabled
Schedule:
Operation frequency (seconds): 60
Next Scheduled Start Time: Start Time already passed
Group Scheduled : FALSE
Randomly Scheduled : FALSE
Life (seconds): Forever
Entry Ageout (seconds): 3600
Recurring (Starting Everyday): FALSE
Status of entry (SNMP RowStatus): Active
Threshold (milliseconds): 5000
Distribution Statistics:
Number of statistic hours kept: 2
Number of statistic distribution buckets kept: 1
Statistic distribution interval (milliseconds): 20
Enhanced History:
#sh ip sla statistics
Round Trip Time (RTT) for Index 135123
Type of operation: jitter
Latest RTT: 45 ms
Latest operation start time: 14:36:31.759 MET Wed Mar 16 2011
Latest operation return code: OK
RTT Values
Number Of RTT: 1000
RTT Min/Avg/Max: 21/45/60 ms
Latency one-way time milliseconds
Number of Latency one-way Samples: 0
Source to Destination Latency one way Min/Avg/Max: 0/0/0 ms
Destination to Source Latency one way Min/Avg/Max: 0/0/0 ms
Jitter time milliseconds
Number of SD Jitter Samples: 999
Number of DS Jitter Samples: 999
Source to Destination Jitter Min/Avg/Max: 0/3/15 ms
Destination to Source Jitter Min/Avg/Max: 0/1/9 ms
Packet Loss Values
Loss Source to Destination: 0 Loss Destination to Source: 0
Out Of Sequence: 0 Tail Drop: 0
Packet Late Arrival: 0 Packet Skipped: 0
Voice Score Values
Calculated Planning Impairment Factor (ICPIF): 11
MOS score: 4.06
Number of successes: 18
Number of failures: 0
Operation time to live: Forever
#sh run all | include 135123
Any suggestions? Am I right?
The second problem is about the dynamic user tracking like these theads https://supportforums.cisco.com/message/3135881#3135881 or
https://supportforums.cisco.com/message/3195492#3195492
Access switches are configured properly, the configuration ran without any problems with the previous installation.
No changes done at the configuration, using the default trap listener port etc.
In the macuhic.log file I get entries like in the attached txt.
When I try to run a full Campus Manager Data Collection I get the following errormessage:
Failed to start acquisition: Construction of XML data required for UT is in progress.Please try after some time
Also any suggestions? Am I right, too?By default IP SLA collectors installed by IPM do not appear in the running configuration. If you want to install the collectors into the running configuration, then set the "Copy IPSLA Configuration to running-config" property under IPM > Admin > Application Settings, then delete and recreate the collector.
Your Campus problem could be CSCtd49439 (a patch is available by contacting TAC). However, you should start a new thread for your Campus problem. -
Non root user can delete root files, bug?
We're having an odd permissions based problem on Solaris 10 u5 x86_64, (new install, fully patched as of 2 days ago) It means that non root users can delete root owned files, which is something I've never seen before, and I've been doing this for almost 10 years.
We're installing into an 80Gb container on VMware ESX server 3.0.1. The OS takes 20Gb (2 processors, 4Gb memory, 8Gb swap) most of the remaining 60Gb is being used as both file systems and raw devices under disksuite as soft partitions. It's one of the file systems, /apps (where we plan to install sybase) that is giving us "issues"
Essentially:
# more /etc/vfstab |grep apps
/dev/md/dsk/d0 /dev/md/rdsk/d0 /apps ufs 2 yes -
# newfs -v /dev/md/rdsk/d0
/dev/md/rdsk/d0: Unable to find Media type. Proceeding with system determined parameters.
newfs: /dev/md/rdsk/d0 last mounted as /apps
newfs: construct a new file system /dev/md/rdsk/d0: (y/n)? y
mkfs -F ufs /dev/md/rdsk/d0 20971520 -1 -1 8192 1024 264 1 546 8192 t 0 -1 8 7 n
/dev/md/rdsk/d0: Unable to find Media type. Proceeding with system determined parameters.
Warning: 4096 sector(s) in last cylinder unallocated
/dev/md/rdsk/d0: 20971520 sectors in 3414 cylinders of 48 tracks, 128 sectors
10240.0MB in 214 cyl groups (16 c/g, 48.00MB/g, 5824 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32, 98464, 196896, 295328, 393760, 492192, 590624, 689056, 787488, 885920,
20055584, 20154016, 20252448, 20350880, 20449312, 20547744, 20646176,
20744608, 20843040, 20941472
# mount /apps
# ls -al /apps
total 20
drwxr-xr-x 3 root root 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
# su - sybase
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
sol10% cd /apps
sol10% rm *
rm: lost+found is a directory
sol10% rm -rf *
rm: cannot read directory lost+found: Permission denied
sol10% ls -al
total 20
drwxr-xr-x 3 root root 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
sol10% exit
sol10% logout
# chgrp sybase /apps
# chmod g+w /apps
# ls -ald /apps
drwxrwxr-x 3 root sybase 512 Sep 10 12:31 /apps
# ls -al /apps
total 20
drwxrwxr-x 3 root sybase 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
# su - sybase
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
sol10% cd /apps
sol10% rm -rf *
sol10% ls -al
total 4
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
sol10% id
uid=***(sybase) gid=***(sybase)
sol10% exit
sol10% logout
# pwd
# ls -ald /apps
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 /apps
# ls -al /apps
total 4
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
It's a new "bare metal" (in as much as there is no metal) install. I created the sybase user from scratch by hand editing passwd, group and shadow, buy copying and pasting the data out of the NIS maps. All I've done besides the install & patch is setup networking manually, and created the metadb's and the soft partitions and the mount points & newfs'ed & mounted three of them . I then changed ownership of /apps to be sybase:sybase, and handed it to the database team for the sybase install. they came back and said "should we be able to do this?" as they habitually run rm rf * knowing they can't delete root owned files, only now they can... This is true even if I just chgrp the directory and give them group write permissions. They can still delete anything owned by root, even if it doesn't have group permissions just like the lost+found directory. No other "real" machine we have, x86 or SPARC does this, but we've never installed u5 before either.
As you can imagine losing the lost+found directory is a bit of a problem, however what's really worrying me is if they can do that, what happens when they run sybase as the sybase user? If it borks can they trash the OS and write/overwrite random files?
It's a VM, so in as much that's not a problem, but the reason it's a VM is somebody wants to send a VM to a client as a demo, and at present it's highly unstable IMO.
Does anyone have any idea where to start? My thoughts are that it may be a VMware issue, (though the hardware and the guest OS is supported) it could be a bug, because I've never seen that weird newfs error before, and then I found this:
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6622243
Or it could be me, and the fact that I'm hand configuring it, and u5 now requires I do it "properly" with useradd, etc. I'd like to test, but the guy wants it built, and wants it now, so I patched it up, and gave it back to the database team and told them to be careful.
I'd be interested in you opinions regardless.
The full spec of the "machine" is below, sol10 is not it's name for obvious reasons, and I've hashed out the ID & GIUD for similar reasons.
# uname -a
SunOS sol10 5.10 Generic_127128-11 i86pc i386 i86pc
# prtdiag
System Configuration: VMware, Inc. VMware Virtual Platform
BIOS Configuration: Phoenix Technologies LTD 6.00 09/06/2007
==== Processor Sockets ====================================
Version Location Tag
Pentium(R) Pro CPU socket #0
Pentium(R) Pro CPU socket #1
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
DRAM in use 0 RAM slot #0 RAM slot #0
DRAM in use 0 RAM slot #1 RAM slot #1
DRAM in use 0 RAM slot #2 RAM slot #2
DRAM in use 0 RAM slot #3 RAM slot #3
==== On-Board Devices =====================================
VMware SVGA II
ES1371
==== Upgradeable Slots ====================================
ID Status Type Description
0 unknown ISA ISA Slot J8
0 unknown ISA ISA Slot J9
0 unknown ISA ISA Slot J10
1 in use PCI PCI Slot J11
2 in use PCI PCI Slot J12
3 in use PCI PCI Slot J13
4 available PCI PCI Slot J14
# dmesg
Wednesday, 10 September 2008 15:33:35 BST
Sep 10 10:17:44 sol10 busra: [ID 490441 kern.info] NOTICE: ndi_ra_free: bad free, dip ffffffff803807a8, resource type memory
Sep 10 10:17:44 sol10 busra: [ID 883242 kern.info] NOTICE: ndi_ra_free: freeing base 0xe0000, len 0x4000 overlaps with existing resource base 0x0, len 0xf4000000
Sep 10 10:17:44 sol10 rootnex: [ID 349649 kern.info] pci0 at root: space 0 offset 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] pci0 is /pci@0,0
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 Rev. 1 LSI, Inc. 1030 found.
Sep 10 10:17:44 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci1000,30 (mpt) instance 0 vector 0x11 ioapic 0x2 intin 0x11 is bound to cpu 0
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 mpt0 Firmware version v0.0.0.0 (?)
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 mpt0: IOC Operational.
Sep 10 10:17:44 sol10 pci: [ID 370704 kern.info] PCI-device: pci1000,30@10, mpt0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] mpt0 is /pci@0,0/pci1000,30@10
Sep 10 10:17:44 sol10 scsi: [ID 193665 kern.info] sd0 at mpt0: target 0 lun 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] sd0 is /pci@0,0/pci1000,30@10/sd@0,0
Sep 10 10:17:44 sol10 genunix: [ID 408114 kern.info] /pci@0,0/pci1000,30@10/sd@0,0 (sd0) online
Sep 10 10:17:44 sol10 unix: [ID 190185 kern.info] SMBIOS v2.31 loaded (1695 bytes)
Sep 10 10:17:44 sol10 genunix: [ID 408114 kern.info] /cpus (cpunex0) online
Sep 10 10:17:44 sol10 pseudo: [ID 129642 kern.info] pseudo-device: dld0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] dld0 is /pseudo/dld@0
Sep 10 10:17:44 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: i8042 (i8042) instance 0 vector 0x1 ioapic 0x2 intin 0x1 is bound to cpu 1
Sep 10 10:17:44 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: i8042 (i8042) instance #0 vector 0xc ioapic 0x2 intin 0xc is bound to cpu 1
Sep 10 10:17:44 sol10 i8042: [ID 526150 kern.info] 8042 device: keyboard@0, kb8042 # 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] kb80420 is /isa/i8042@1,60/keyboard@0
Sep 10 10:17:44 sol10 i8042: [ID 526150 kern.info] 8042 device: mouse@1, mouse8042 # 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] mouse80420 is /isa/i8042@1,60/mouse@1
Sep 10 10:17:44 sol10 unix: [ID 950921 kern.info] cpu0: x86 (GenuineIntel family 6 model 15 step 8 clock 2000 MHz)
Sep 10 10:17:44 sol10 unix: [ID 950921 kern.info] cpu0: Intel(r) Xeon(r) CPU E5335 @ 2.00GHz
Sep 10 10:17:47 sol10 unix: [ID 950921 kern.info] cpu1: x86 (GenuineIntel family 6 model 15 step 8 clock 2000 MHz)
Sep 10 10:17:47 sol10 unix: [ID 950921 kern.info] cpu1: Intel(r) Xeon(r) CPU E5335 @ 2.00GHz
Sep 10 10:17:47 sol10 unix: [ID 557827 kern.info] cpu1 initialization complete - online
Sep 10 10:17:47 sol10 rootnex: [ID 349649 kern.info] iscsi0 at root
Sep 10 10:17:47 sol10 genunix: [ID 936769 kern.info] iscsi0 is /iscsi
Sep 10 10:17:52 sol10 genunix: [ID 454863 kern.info] dump on /dev/dsk/c1t0d0s1 size 8197 MB
Sep 10 10:17:53 sol10 pci: [ID 370704 kern.info] PCI-device: pci8086,7191@1, pci_pci0
Sep 10 10:17:53 sol10 genunix: [ID 936769 kern.info] pci_pci0 is /pci@0,0/pci8086,7191@1
Sep 10 10:17:54 sol10 mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
Sep 10 10:17:54 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,100f (e1000g) instance 0 vector 0x12 ioapic 0x2 intin 0x12 is bound to cpu 0
Sep 10 10:17:54 sol10 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network Connection, Driver Ver. 5.1.11
Sep 10 10:17:54 sol10 pseudo: [ID 129642 kern.info] pseudo-device: zfs0
Sep 10 10:17:54 sol10 genunix: [ID 936769 kern.info] zfs0 is /pseudo/zfs@0
Sep 10 10:17:55 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Sep 10 10:17:55 sol10 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Sep 10 10:17:55 sol10 pseudo: [ID 129642 kern.info] pseudo-device: power0
Sep 10 10:17:55 sol10 genunix: [ID 936769 kern.info] power0 is /pseudo/power@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Sep 10 10:17:56 sol10 rootnex: [ID 349649 kern.info] xsvc0 at root
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] xsvc0 is /xsvc
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pseudo1
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] pseudo1 is /pseudo/zconsnex@1
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: lp (ecpp) instance 0 vector 0x7 ioapic 0x2 intin 0x7 is bound to cpu 1
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: ecpp0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ecpp0 is /isa/lp@1,378
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: asy0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
Sep 10 10:17:56 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: asy (asy) instance #1 vector 0x3 ioapic 0x2 intin 0x3 is bound to cpu 0
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: asy1
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] asy1 is /isa/asy@1,2f8
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 1
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 0
Sep 10 10:17:56 sol10 genunix: [ID 640982 kern.info] ATAPI device at targ 0, lun 0 lastlun 0x0
Sep 10 10:17:56 sol10 genunix: [ID 846691 kern.info] model VMware Virtual IDE CDROM Drive
Sep 10 10:17:56 sol10 genunix: [ID 479077 kern.info] ATA/ATAPI-4 supported, majver 0x1e minver 0x17
Sep 10 10:17:56 sol10 pci: [ID 370704 kern.info] PCI-device: ide@0, ata0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ata0 is /pci@0,0/pci-ide@7,1/ide@0
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 scsi: [ID 193665 kern.info] sd1 at ata0: target 0 lun 0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] sd1 is /pci@0,0/pci-ide@7,1/ide@0/sd@0,0
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: fdc (fdc) instance 0 vector 0x6 ioapic 0x2 intin 0x6 is bound to cpu 1
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: fdc0
Sep 10 10:17:56 sol10 fdc: [ID 114370 kern.info] fd0 at fdc0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] fd0 is /isa/fdc@1,3f0/fd@0,0
Sep 10 10:17:56 sol10 genunix: [ID 314293 kern.info] device pciclass,030000@f(display#0) keeps up device sd@0,0(sd#1), but the latter is not power managed
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: nvidia255
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] nvidia255 is /pseudo/nvidia@255
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ramdisk1024 is /pseudo/ramdisk@1024
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: llc10
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: dtrace0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] dtrace0 is /pseudo/dtrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: profile0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: systrace0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fbt0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: sdt0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fasttrap0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fasttrap0 is /pseudo/fasttrap@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcp0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ucode0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] ucode0 is /pseudo/ucode@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: winlock0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: vol0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pool0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] pool0 is /pseudo/pool@0
Sep 10 10:17:57 sol10 ipf: [ID 774698 kern.info] IP Filter: v4.1.9, running.
Sep 10 10:18:05 sol10 nfs4cbd[395]: [ID 867284 daemon.notice] nfsv4 cannot determine local hostname binding for transport tcp - delegations will not be available on this transport
Sep 10 10:18:10 sol10 sendmail[598]: [ID 702911 mail.crit] My unqualified host name (localhost) unknown; sleeping for retry
Sep 10 10:18:10 sol10 sendmail[600]: [ID 702911 mail.crit] My unqualified host name (localhost) unknown; sleeping for retry
Sep 10 10:18:17 sol10 mac: [ID 736570 kern.info] NOTICE: e1000g0 unregistered
Sep 10 10:19:10 sol10 sendmail[598]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
Sep 10 10:19:10 sol10 sendmail[600]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
Sep 10 10:20:10 sol10 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Sep 10 10:20:10 sol10 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Sep 10 10:24:54 sol10 mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
Sep 10 10:24:54 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,100f (e1000g) instance 0 vector 0x12 ioapic 0x2 intin 0x12 is bound to cpu 0
Sep 10 10:24:54 sol10 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network Connection, Driver Ver. 5.1.11
Sep 10 10:24:59 sol10 e1000g: [ID 801725 kern.info] NOTICE: pci8086,100f - e1000g[0] : Adapter 1000Mbps full duplex copper link is up.
Sep 10 10:28:21 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: lp (ecpp) instance 0 vector 0x7 ioapic 0x2 intin 0x7 is bound to cpu 1
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: ecpp0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ecpp0 is /isa/lp@1,378
Sep 10 10:35:17 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: asy0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
Sep 10 10:35:17 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: asy (asy) instance #1 vector 0x3 ioapic 0x2 intin 0x3 is bound to cpu 0
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: asy1
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] asy1 is /isa/asy@1,2f8
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: nvidia255
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] nvidia255 is /pseudo/nvidia@255
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ramdisk1024 is /pseudo/ramdisk@1024
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: llc10
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: profile0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: systrace0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fbt0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: sdt0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcp0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ucode0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ucode0 is /pseudo/ucode@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: winlock0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 11:28:55 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 12:28:56 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 13:29:01 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 14:29:10 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 15:29:38 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
# prtconf
System Configuration: Sun Microsystems i86pc
Memory size: 4132 Megabytes
System Peripherals (Software Nodes):
i86pc
scsi_vhci, instance #0
isa, instance #0
i8042, instance #0
keyboard, instance #0
mouse, instance #0
lp, instance #0
asy, instance #0
asy, instance #1
fdc, instance #0
fd, instance #0
pci, instance #0
pci15ad,1976 (driver not attached)
pci8086,7191, instance #0
pci15ad,1976 (driver not attached)
pci-ide, instance #0
ide, instance #0
sd, instance #1
ide (driver not attached)
pci15ad,1976 (driver not attached)
display, instance #0
pci1000,30, instance #0
sd, instance #0
pci15ad,750, instance #0
iscsi, instance #0
pseudo, instance #0
options, instance #0
agpgart, instance #0
xsvc, instance #0
objmgr, instance #0
acpi (driver not attached)
used-resources (driver not attached)
cpus, instance #0
cpu (driver not attached)
cpu (driver not attached)
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <DEFAULT cyl 10440 alt 2 hd 255 sec 63>
/pci@0,0/pci1000,30@10/sd@0,0
Specify disk (enter its number): 0
selecting c1t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
/dev/dsk/c1t0d0s0 is currently mounted on /. Please see umount(1M).
/dev/dsk/c1t0d0s1 is currently used by swap. Please see swap(1M).
/dev/dsk/c1t0d0s3 is currently mounted on /usr. Please see umount(1M).
/dev/dsk/c1t0d0s4 is currently mounted on /var. Please see umount(1M).
/dev/dsk/c1t0d0s5 is currently mounted on /opt. Please see umount(1M).
/dev/dsk/c1t0d0s6 is part of SVM volume sp:d8. Please see metaclear(1M).
/dev/dsk/c1t0d0s7 contains an SVM mdb. Please see metadb(1M).
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> p
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> p
Current partition table (original):
Total disk cylinders available: 10440 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 1 - 131 1.00GB (131/0/0) 2104515
1 swap wu 132 - 1176 8.01GB (1045/0/0) 16787925
2 backup wm 0 - 10439 79.97GB (10440/0/0) 167718600
3 usr wm 1177 - 1829 5.00GB (653/0/0) 10490445
4 var wm 1830 - 2091 2.01GB (262/0/0) 4209030
5 unassigned wm 2092 - 2614 4.01GB (523/0/0) 8401995
6 unassigned wm 2617 - 10439 59.93GB (7823/0/0) 125676495
7 unassigned wm 2615 - 2616 15.69MB (2/0/0) 32130
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 unassigned wm 0 0 (0/0/0) 0
partition> quit
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> q
# metastat -p
d8 -p c1t0d0s6 -o 109973513 -b 61440
d7 -p c1t0d0s6 -o 109461512 -b 512000
d6 -p c1t0d0s6 -o 109051911 -b 409600
d5 -p c1t0d0s6 -o 88080390 -b 20971520
d4 -p c1t0d0s6 -o 67108869 -b 20971520
d3 -p c1t0d0s6 -o 46137348 -b 20971520
d2 -p c1t0d0s6 -o 41943043 -b 4194304
d1 -p c1t0d0s6 -o 20971522 -b 20971520
d0 -p c1t0d0s6 -o 1 -b 20971520An easy way to think of it is this -- everything in Unix is a file. Including directories; they are just a file which contains a list of the files in that directory, and pointers to them.
If the 'sybase' user has write permission on the directory, they have permission to edit that "list", and can add or remove files to the list. It doesn't matter who the files on the list belong to, because the files are not what is being modified. Only the list of files is being modified. (Of course, in Unix, if you erase the file's listing from all of the lists it's on, the file itself goes away for housekeeping purposes.)
One thing that would have stopped the 'sybase' user from removing the lost+found directory is if that directory itself had files in it -- without write permission to the lost+found directory, that user could not have removed those files, and since one cannot remove a non-empty directory, that operation would have failed. Since lost+found was empty in this case, it could be removed simply by having permission to write to the /apps directory.
This behavior does change if you set the sticky bit on the directory -- in that case, files may only be removed by the owner of the file or directory, or if the user has write permission to the file. This would have prevented the sybase user from removing the lost+found directory. (Note, this also applies to the 'rename' function call.) This would probably be the best way to handle your situation, since you apparently do want the sybase user to be able to add files to /apps, but do not want them to be able to remove lost+found.
Edited by: MadBishop on Sep 12, 2008 7:46 AM -
Campus manager user tracking problem
Hi We are using LMS 3.0.1 and the campus manager verson is 5.0.2. We have two subnet which are used for the management ip of switch kept in two different geographical areas. I have made the entry of all devices kept in both subnets and all the devices are know device in DCR, RME and DFM. also after data collection the devices are shown in campus manager database. But I am not able to learn the end host details of the hosts connected to one of our segment.
even if the perticular subnet is not appearing in "campus user tracking" as well as the devices belongs to the subnet. but I am getting all end host details from the second subnet.
please help.Hi clarke,
i have updated the cm to the latest but still it did not learn. Later i added the 10.188.7.x ip addresses manually in the discovery settings instead of " *.*.*.* " - ip range. Now i am able to see these devices in topology view > layer 2 veiw as connected devices & not seen in unconnected..
Now i need to see the hostname, ip address etc details of these segments in UT acquisition window.... Secondly in topology view, the core switch is showing in "?" question mark symbol. This device is WS-C6509-E (sup-bootdisk:s72033-ipbase-mz.122-33.SXH3a.bin). I tried to delete this device from common services and added it again, there i selected "ws-c6509", i did not see the " ws-c6509-E".
in Cisco site, the serial number of the device is showing as the device "VS-C6509E-S720-10G"
Can u pls help me on this..
regards
rajesh -
Financial Reports User Tracking
Hi Guys
Can any one tell me how to track the user login, report modification, creation and deletion kind of activities in FR--System 9.X??
Appreciate your inputs..
Thanks
JaganThanks for your response.
Can you explain how can we set up this user tracking for FR and WA reports. I think this usage tracking is only for IR reports.
Really appreciate if you can share your experiance on this...
Thanks
Jagan -
LMS 4.2 User Tracking not enabled
Hi all,
I have an issue on some switches located on remote sites.
For all switches on the main site (where LMS is located) User tracking is enabled.
For switches on the remote sites, user tracking seems not to be enabled.
This means we can't run the reclaim ports reports on them.
Discovery, Fault Discovery and Inventory are enabled,
but User tracking and Data collection are not active on these remote swithes.
How can this feature be enabled? Can't seem to find it.
Thx in advance!Hi ,
you need not to do anything on the switch..
You need to check if for those devices "Data collection " is running fine or not
I hope the device is managed in LMS , check the device here first "Admin > Collection Settings > User Tracking > Acquisition Action"
If the device is missing then delete it and re-add in LMS and run the Data collection followed by user tracking acquisition.
Are you using SNMPv2 or SNMPv3 on those devices ?
Thanks-
Afroz -
CiscoWorks LMS 4.0.1 + Catalyst 3750X - User Tracking Issue
Hello all,
We just deployed some Catalyst 3750X-48PF-L switches. I noticed that the user tracking report doesn't work normally.
The switches have C3KX-10Gb NM modules, and all access port are 1 Gbit. But in the User Tracking report, I see devices found on Fa0/43 for example (this is because the previous switch was a Catalyst 2960. I deleted the old switch and add the new 3750X, so this could not be the cause of the problem).
I installed all the patches that are available for LMS 4.0.1.
Could anybody help me please?
Thanks in advance!Any old entries won't automatically be removed until they age out (I believe 90 days is the default time). You can override / modify that by going in to Admin > Network > Purge Settings > User Tracking Purge Policy.
If that fails, you could re-initaitlize the User Tracking db and re-run a Major Acquisition to refresh everything but that would also have the effect of deleting all historical UT entries you may want to keep.
To reinitialize a db, please see the procedures posted here. ANI is the db used by User Tracking. -
Dynamic User Tracking Ignoring Traps
LMS3.2
Campus Manager 5.2.0
Set up a switch per instructions and moved a PC from port to port. The Results:
S0068SWT0CW#sh mac ad not change
MAC Notification Feature is Enabled on the switch
Interval between Notification Traps : 1 secs
Number of MAC Addresses Added : 5
Number of MAC Addresses Removed : 4
Number of Notifications sent to NMS : 9
Maximum Number of entries configured in History Table : 1
Current History Table Length : 1
MAC Notification Traps are Enabled
History Table contents
History Index 1, Entry Timestamp 954048629, Despatch Timestamp 954048629
MAC Changed Message :
Operation: Added Vlan: 5 MAC Addr: 0024.e8f4.52fe Dot1dBasePort: 4
S0068SWT0CW#
Wireshark on the server shows the SNMP traps arrived at the server, but nothing is logged in the MACUHIC log (all items set for debugging and debugging is enabled) and nothing shows up in the end host report.
Trap listener configuration Listen traps from device is checked.
Dynamic User Tracking Configuration validate trap source by IP address is checked. The source address in validate trap source matches the source shown by wire shark.
What am I missing? How can I further troubleshoot this? ThanksTrap listener Configuration
Listen traps from device is selected
Listen traps from DFM/HPOV is not selected
trap listener port 1431
Dynamic User Tracking Configuration
validate SNMP Community not selected
validate trap source is selected
IP address is 10.67.139.100
It didn't work with the validate trap source not selected
I am not using DFM. The device is sending its traps to the server with campus manager. -
Dynamic User Tracking with WS-C4506-E
Hello,
I've the following problem, configured dynamic user tracking on a
WS-C4506-E with a WS-X45-SUP6L-E, System image file is a Version 12.2(53)SG2
Interface configuration:
snmp trap mac-notification change added
snmp trap mac-notification change removed
Global configuration:
snmp-server enable traps mac-notification change
snmp-server host xx.xxx.xx.xxx version 2c COMMUNITY udp-port 1431 mac-notification
mac address-table notification change interval 60
mac address-table notification change history-size 50
mac address-table notification change
#sh mac address-table notification change
MAC Notification Feature is Enabled on the switch
Interval between Notification Traps : 60 secs
Number of MAC Addresses Added : 21509
Number of MAC Addresses Removed : 21484
Number of Notifications sent to NMS : 11632
Maximum Number of entries configured in History Table : 50
Current History Table Length : 50
MAC Notification Traps are Enabled
UTU2 does not found any records for the device name or if I search for a directly connected PC to this switch.Where is this Collector Status screen? What dashboard is it on ?
>> Device Center > Troubleshooting Workflow
The fact that you have success for usertracking does not mean you server receives mac address notification traps. It only means the passive usertracking has run. The UT results from the other switch may come from this process.
>> Yes you're right.
Only via snoop or packetcapture you can be sure you receive the traps you want.
>> I set up a packetcapture on the server, the server receives the mac address notification traps on UDP port 1431.
>>Dynamic user tracking of switches from the same site works...for example I have three WS-C3750V2-48PS-S over >>there.
Also if you look at the Collection Sumary in the Inventory -> Device Status dashboard you may find that some devics fail on usertracking.
>> Both switches are not under the failed devices.
>>I'm a little bit confused now.... I can't even start a acquisition manually, LMS says device is not reacheable... but in Device Center (1st picture) "ping", "snmp" etc... is OK... -
LMS3.2 - Campus User Tracking - Configure Subnet Acquisition
Hi,
under
"Campus User Tracking - Aministration - Acquisition - Configure Subnet Acquisition"
Then I have the window with "Perform subnet based acquisition", there is the list with "Available Subnets"
1. From where are coming these subnets?
2. Where can I configure this list, add/delete subnets?
Regards MarcusThese subnets come from the routers that Campus Manager is managing. You cannot manually add subnets to this list. They will be discovered automatically from the devices managed by Campus.
-
Looking for a better way to utilize streams to track deletes in the db.
I'm trying to figure out a way to track deletes in the database using streams. I found that a dml_hander for deletes could satisfy my needs but it appears I would need to create a dml_handler for each table in the schema. Since I have ~250 tables I'm thinking there has to be a better way to do this. I simply need a way to capture all deletes and insert them into a table before they are deleted from the db. Is there a better way then creating a handler for each table?
Thanks,
DougSo far you haven't posted a version number or any information about the use of any auditing tool, whether FGA or other auditing so it is impossible to either comment or advise you further.
If you want help you are going to need to do something you did not do in your original post and that is provide a description of your environment, your business rules, how you have attempted to use FGA or standard auditing, etc. Streams is for replication not auditing so perhaps you mean AQ but so far you haven't said that yet either.
The more information you can provide, and perhaps some code or clear descriptions of what you've attempted, the better the help possible. -
What is the best approach to track deleted records
Dear all,
We have build a CMS platform which is based on SQL server 2012 tables structure hosted in Azure.
We have build on top of this some REST API method in order to access data from any type of client application.
The issues we need to solved now is what his the best way to track deleted records in order that client application gets informed through web service about deleted data from our CMS.
We were thinking of 2 path actually :
- having a kind of Ghost table for each of our real table where deleted records will be inserted into ( physical delete ). This would mean adding as many Ghost tables as we have production tables
- Adding a IsDeleted flag to each of our table which will be set to true when a record is deleted from our CMS ( logical delete ). This would means adding an IsDelete field to each of our tables, create and update all our store procedure and web services
in order to taken in account that new filter criteria to fetch our records. Quite huge job
Will there be any other approach ?
We are looking the best solution with minimum impact on our current solution
reagards
Your knowledge is enhanced by that of others.Hello,
@Tom, based on your question
"The question would be what do you need to do with the deleted records and how long do you need to keep them?"
When records is deleted, then I simply want to delete them and informed any client application about deleted items in order to get data in Sync. I will not have any reporting on deleted data !
The only reason of tracking delete tables items, is simply to informed client application through web service sync about the data to be ignored. Client application have a caching database records for performance reason and is is require to not used data
from that local storage which has been reported as deleted by the SQL server on Aure.
Does this make sense ?
regards
Your knowledge is enhanced by that of others.
Maybe you are looking for
-
How can i set a series of measurement's by time?
im trying to run a series of temp measurments which should be done every 5 cm , how can i set this kind of test? Solved! Go to Solution.
-
MacBook external display problem with Panasonic projector
MacBook (September 2006, Intel 945) with Boot Camp and XP Pro won't display externally from Boot Camp to a Panasonic PT-DW5000U projector using VGA (via the MiniDVI-to-VGA adapter/dongle). I tried 640x480x8-bit and 800x600x16-bit and 1024x768x16-bit.
-
Call ITS SAP R3 from CRM WebClient using parameter NOHEADEROKCODE=1
Good day, I need some help with an issue. We want to hide the command field in the SAP GUI for HTML using parameter ~noHeaderOkCode. [http://help.sap.com/erp2005_ehp_04/helpdata/EN/49/f7cf3f06bd3946e10000000a114084/frameset.htm] But we want to hide i
-
Analog connection for X-Fi Fatal
Hi, Is it possible to connect the analog RCA input of a Pioneer Home Theater decoder to the 3 minijack provided by the X-Fi FPS? Does exist a cable like that? Otherwise I cannot hear the rear speakers not even with an optical connection and cannot us
-
Vision 8.0 / Vision 7.0 Compatibility
I've recently developt softwares in LV8 + Vision 8. I've tried to deploy these in a computer which contains LV7 + Vision RTE 7.1 and other applications full made in 7.1. I installed the LV 8 RTE and replaced the Dll NiVIsion 7.1 by 8 to ensure the co