User unable to read attachment​s from digitally signed emails
I have an Army user with a Blackberry 8830 World Edition, paired with a Bluetooth Smart Card reader. Whenever he tries to open up digitally signed emails, it always requires him to use his CAC card to decrypt the message, whereas with other users, they don't require the same.
As well, when the user has digitally signed emails with attachments, the attachments show up as a garbled mess. He las the latest Bluetooth Smart Card reader drivers, as well as the SMIME package, installed on his Blackberry. Does anybody know of any ideas we could try?
Good evening....
I am not sure if you have received any more information on the issue. I just came across the same issue. I am not completely familiar with this setup but I am going to look into the different settings on the BB device for SMIME and see if I can fix it.
I would be grateful if you have gotten a fix for this and could provide some guidance. I will post resolution if found.
Good luck.
Similar Messages
-
Unable to read SEARCH response from backend server
Currently we have problem when searching huge amounts of users against new SunOne Directory Server v6.3
in production and acceptance.
[17:12:43] root@ecdiala03-2[!]# /opt/app/sun/ds6/bin/dsadm -V
[dsadm]
dsadm : 6.3 B2008.0311.0058 NAT
[slapd 64-bit]
Sun Microsystems, Inc.
Sun-Java(tm)-System-Directory/6.3 B2008.0311.0058 64-bit
ns-slapd : 6.3 B2008.0311.0058 NAT
Slapd Library : 6.3 B2008.0311.0058
Front-End Library : 6.3_MTR_5087249_1_20081209 B2008.1210.1821
==============================================================
Its not working while searching huge amounts of users against DPS.However, Its working while searching huge amounts of users against DS.
Below is the error from access log of DPS when the problem occurred.
==================================
31/Mar/2009:14:08:17 +0200] - CONNECT - INFO - conn=4565433 client=153.88.247.15:2719 server=ecdiala03-1:389 protocol=LDAP
[31/Mar/2009:14:08:17 +0200] - PROFILE - INFO - conn=4565433 assigned to connection handler cn=default connection handler, cn=connection handlers, cn=config
[31/Mar/2009:14:08:17 +0200] - OPERATION - INFO - conn=4565433 op=0 BIND dn="uid=itimadm1,ou=system accounts,o=ericsson" method="SIMPLE" version=3
[31/Mar/2009:14:08:17 +0200] - SERVER_OP - INFO - conn=4565433 op=0 BIND dn="uid=ITIMADM1,ou=system accounts,o=Ericsson" method="SIMPLE"" version=3 s_msgid=17 s_conn=ecditna03-2:72725
[31/Mar/2009:14:08:17 +0200] - SERVER_OP - INFO - conn=4565433 op=0 BIND RESPONSE err=0 msg="" s_conn=ecditna03-2:72725
[31/Mar/2009:14:08:17 +0200] - PROFILE - INFO - conn=4565433 assigned to connection handler cn=BindDone,cn=connection handlers,cn=config
[31/Mar/2009:14:08:17 +0200] - OPERATION - INFO - conn=4565433 op=0 BIND RESPONSE err=0 msg="" etime=0
[31/Mar/2009:14:08:17 +0200] - OPERATION - INFO - conn=4565433 op=1 msgid=2 SEARCH base="ou=External,o=Ericsson" scope=2 filter="(objectclass=inetorgperson)" attrs="*"
[31/Mar/2009:14:08:17 +0200] - SERVER_OP - INFO - conn=4565433 op=1 SEARCH base="ou=external,o=ericsson" scope=2 filter="(objectclass=inetorgperson)" attrs="*" s_msgid=18 s_conn=ecditna03-2:72725
[31/Mar/2009:14:12:25 +0200] - OPERATION - INFO - conn=4565433 op=1 SEARCH RESPONSE err=1 msg="Unable to read SEARCH response from backend server : Timeout when waiting to read from input stream" nentries=33959 etime=248309
[31/Mar/2009:14:17:25 +0200] - DISCONNECT - INFO - conn=4565433 reason="other" msg="Exception caught while polling client connection LDAP.153.88.247.15.2719 -- java.io.IOException: Connection reset by peer"
================================
>>
> > [15:12:29] root@ecdiala03-1[!]# ./dpadm -V
> >
> > [dpadm]
> >
> > dpadm :
> >
6.3_PD_COMBO_CUMULATIVE_VIRTUAL_15112008_ED2.0+6774589+6780423+6778308+6782659_2
> > B2008.1212.0459 NAT
> >
> >
> >
> > [DPS]
> >
> > Sun Microsystems, Inc.
> >
> >
Sun-Java(tm)-System-Directory-Proxy-Server/6.3_PD_COMBO_CUMULATIVE_VIRTUAL_15112008_ED2.0+6774589+6780423+6778308+6782659_2
> > B2008.1212.0436
> >
> > =================We have changed the value of data-source-read-timeout in DPS from 20s to 30m.As per application test, the "time out" error has gone, but we get a new error as following.
==========================
[27/Apr/2009:05:28:36 +0200] - SERVER_OP - INFO - conn=209469 op=8 SEARCH base="ou=internal,o=ericsson" scope=2 filter="(objectclass=ericssonInternal)" attrs="EriCA-AttesterNL EriCA-EmploymentForm EriCA-KeyRecoveryNL-Auth EriCA-NL-Auth EriCA-NLOTP-Admin EriCA-NLOTP-User EriCA-accountExpires c cn departmentNumber description displayName eriCompanySynch eriCountry eriCountryCode eriEmployeeStatus eriExpired eriIsManager eriMasterDomain eriOpOrgUnitAbbreviation eriOpOrgUnitIdentifier eriOpOrgUnitName eriOperationalManager eriPartner eriPartnerTrigram eriPwSynchDate eriSignType eriSignum eriSignumStatus facsimileTelephoneNumber givenName isMemberOf l mail memberOf mobile objectClass ou sametimebrowseldap sametimehomeserver sametimeuser smChallResp smDisabled smXauthRADIUSServer sn telephoneNumber title uid uidNumber " s_msgid=27 s_conn=ecditna03-2:8645
[27/Apr/2009:06:06:23 +0200] - SERVER_OP - INFO - conn=209469 op=8 SEARCH RESPONSE err=0 msg="" nentries=236367 s_conn=ecditna03-2:8645
[27/Apr/2009:06:06:23 +0200] - OPERATION - INFO - conn=209469 op=8 SEARCH RESPONSE err=0 msg="" nentries=236367 etime=2266483
[27/Apr/2009:06:11:27 +0200] - DISCONNECT - INFO - conn=209469 reason="other" msg="Exception caught while polling client connection LDAP.153.88.247.15.4862 -- java.io.IOException: Connection reset by peer"
================
Each time while application client (153.88.247.15) connecting DPS to read, they will exit with connection reset error.
Could you please kindly give us some suggestion if this error is realted to the DPS? -
ASDM is unable to read the configuration from ASA.
Earlier today I was configuring the Cisco ASA (7.2(2)) using the ASDM, but after a reboot of the appliance I now get the following:
ASDM is unable to read the configuration from ASA.
This happens shortly after ?Loading running configuration from the device? appears in the ASDM status window.
I have tried restarting both the appliance and my workstation, but the issue persists. I have also tried clearing the ASDM cache, but that doesn?t help either. The issue occurs whether I used the Cisco ASDM Launcher or the web interface.
SSH access to the appliance works fine.
Thanks for any assistance (why is it that Cisco?s GUIs always have issues?!?).I have exactly the same issue , SSH works fine but ASDM and Web interface reply with that error message "ASDM is unable to read the configuration from ASA".
My ASA is a 5520 ver 7.1(2) with ASDM 5.1(2)
Could it be something related to Java ?
Thanks for any hint. -
Tomcat unable to read accented characters from MySQL
Folks,
Can anyone help with me this problem?
It seems that my version of Tomcat is unable to read accented characters from my MySQL Database.
I've checked in the Database and the characters are all correctly represented there. But when, in my servlet code, I do:
String author = results.getString("author_surname");If the String contains any accented character then the character shows as a '?'. (Even before it gets to the JSP - I'm writing the results straight to catalina.out).
Looking around these forums I found that some people suggested adding
?useUnicode=TRUE&characterEncoding=UTF-8;to the end of my jdbc url. As in:
<ResourceParams name="jdbc/connection">
//a whole load of other params
<parameter>
<name>url</name>
<value>jdbc:mysql://localhost:3306/bookshop?useUnicode=TRUE&characterEncoding=UTF-8</value>
</parameter>
</ResourceParams>inside my server.xml
But it doesn't seem to make any difference. In addition, I doubt I even need to use Unicode as the accents I need are only: ����� etc.
(Incidentally, writing that line into my server.xml, tomcat complains that it should finish with a semi-colon. Is that correct? Even if I put in the semi-colon, it still complains!!)
Any suggestions on this would be much appreciated. Thank you.user13109986 wrote:
HI,
From http://download.oracle.com/docs/cd/B10501_01/server.920/a96529/ch9.htm
My understanding is the JDBC Api converts the string from the database to UTF-16.. If so is there any way to disable the UTF-16 encoding at JDBC API?That's exactly what it's supposed to do. There isn't even any concept of what it would mean to disable that: Java characters are UTF-16 representations of Unicode code-points, so there isn't anything else it could do.
I still suspect the JDBC part is working correctly and your writing-to-file isn't. I found this quote in the Wikipedia article on Windows-1256:
Windows-1256 is a code page used to write Arabic (and possibly some other languages that use Arabic script, like Persian) under Microsoft Windows. This code page is not compatible with ISO 8859-6 and MacArabic encodings.So was there a particular reason you chose Cp1256 and not ISO-8859-6 as the charset to write to the file with? -
Can I attach pics from iphoto to email?
I have been trying to attach pictures from iphoto to emails but can only get them to sow up as full pictures in the body of the email instead of as attachments to the email. Is it possible to do this?
That's a setting in Mail. Try right click on the pic and select 'Show as Icon'
Regards
TD -
Difficulty with Digitally Signed Email
I have been having trouble downloading and displaying email messages that are digitally signed. I have downloaded the required certificates and imported them onto the Pre, using the methods outlined both here and in the Pre documentation. I have confirmed that they are the correct certificates by importing the certificates into Thunderbird and seeing the verification of the digital signatures there.
The behavior I am seeing is that the messages take forever to load the body and eventually just time out. This is happening for ORC ECA SW3 and DoD Email CA-19 certificates. It may occur for others also, but I have not received signed messages using any other certificates.
Has anyone else seen this behavior, after correctly installing certificates? Are there any work-arounds?
Post relates to: Pre p100eww (Sprint)The Exchange server here will send messages to clients under the IMAP protocol with the proper certificates attached. I would not recieve the digital signatures on Thunderbird if the server did not send them. I can view the signature information using Thunderbird without difficulty. These same messages will not load, except for the headers, using the IMAP portion of the WebOS client. Using the EAS portion of the WebOS client, they load both the headers and the body, but do not indicate that they have been signed.
While I am not the IT person for this server, I have run email serves in the past. In addition, the IT people are just a door or two down from me here. I believe the problem is really on your (Palm's) side. Can anyone there confirm that a properly digitally signed email can be fully loaded using the Palm Pre's email client from a conforming IMAP server?
Remember, IMAP is a well defined protocol, and it should conform to rigid guidelines. Therefore, using a conforming IMAP server, you should be able to test the reception of digitally signed emails using the Pre client. -
After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.
I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.
-
Asked to enter PIN multiple times when sending Digitally Signed emails
Hey everyone, I have been having a very difficult time trying to figure out why my co-workers and myself are being asked to enter our PIN multiple times when digitally signing emails. My co-workers are looking to me for a solution, however
I just cannot seem to find any information on as to why this is happening. Could anyone possibly shed some light on why this may be happening? Thanks in advanced!!!
P.S. We are using Outlook 2013Hi,
Let's troubleshoot this issue by the following steps:
1. Start Outlook in Safe Mode to determine whether it's 3rd-party add-ins related:
Press Win + R, type "outlook.exe /safe" in the blank box, press Enter.
If no issue in Safe Mode, disable the suspicious add-ins to verify which on caused the problem.
2. Go to Control Panel and search for "Manage computer certificates" then open it, find the certificate and right click on it, choose Properties -> under General tab select "Enable all purposes for this certificate" -> Apply ->
OK.
3. If you create a new Outlook profile, does this issue persist? A new profile will provide a new environment for the account and it will not remove any information from the old profile. A profile corruption may be the source of this issue.
How to create and configure email profiles in Outlook
http://support.microsoft.com/kb/829918/en-us
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Manage computer certificates -
MSCRM Email Router not processing digitally signed emails
In my production environment digitally signed incoming emails are not getting processed and stay there in inbox.
Does Email Router supports Digitally signed emails ?
Thanks in Advance
- VijayHi Vijay - did you ever find a way to receive these - thanks
Stuart
Stuart -
Does CRM email router support digitally signed emails?
Hello There,
I have configured email router in a one of our test environment to check, i am able to trace incoming mails which has digital signed mails get tracked in CRM.
Does CRM email router support digitally signed emails?
i am not able to trace mails in to CRM,, have you ever faced this ???? kindly suggest i need this to figure this out.
Thanks,
Vinay Kumar.
Vinay Kumar.Thanks Vinay, glad you got it working. We were having some issues and its related to the level of rollup and whether certain headers are allowed through exchange or not.
However MS's answer is that it does not work.
Confusing eh.
CHeers
Stuart
Stuart -
Can CRM 2011 email router process digitally signed emails?
Hi there,
Please can you tell em is the CRM 2011 email router is able to process digitally signed emails, as our just seems to ignore them.
Its annoying as you can track the email manually, but not through the email router at the moment.
Many thanks
Stuart
StuartHi Bartosz,
Can i ask if you ever found a way forward with this...?
I think i have a similar issue with signed emails not being processed.
Many thanks
Stuart
Stuart -
Unable to read attachment from javamail using IMAP
I am unable to read and save attachement in java mail using IMAP, but able to do using POP3
Sample code below:
Multipart multipart = (Multipart) message.getContent();
for (int i = 0, n = multipart.getCount(); i < n; i++)
Part part = multipart.getBodyPart(i);
String disposition = part.getDisposition();
// here i am getting dispostion null if use IMAP, if i use POP3 then i can able to recevive attachment
if ((disposition != null) && ((disposition.equals(Part.ATTACHMENT) || (disposition.equals(Part.INLINE)))))
System.out.println("file name is " + part.getFileName());
message.setFlag(Flags.Flag.ANSWERED, true);
saveFile(part.getFileName(), part.getInputStream());
public static void saveFile(String fn, InputStream in) {
try {
FileOutputStream fos = new FileOutputStream(new File("c://test//" + fn));
byte[] buf = new byte[1024];
int i = 0;
while ((i = in.read(buf)) != -1) {
fos.write(buf, 0, i);
in.close();
fos.close();
} catch (IOException e) {
e.printStackTrace();
Any help is appreciated
Thanks
SamiIf you're getting disposition == null it's because your IMAP server
isn't returning this information to you. Possibly your IMAP server
is buggy. You can look at the protocol trace to see what the IMAP
server is returning, and if it's missing information that should be there,
report a bug to your IMAP server vendor.
Your program might need to work around this problem by deciding
that any body part with a filename is an attachment, or any part
after the first is an attachment. -
XSL-FO unable to read special characters from the XML file
Team,
please help on issue, when trying to read the text from XML file (Special characters like bullet). It is displaying as Question mark(?) in output in place of bullet..please proved any soultion.The "?" signals a character set mismatch issue - http://www.oracle.com/technetwork/database/globalization/nls-lang-099431.html - between client and database software
-
Why am I now unable to read RAW files from 5dmk2 camera.
I have had a H/D rebuild and reloaded Elelemts. Now I find I am unable to read any of my Canon5Dmk2 raw files . Any suggestions please.
Download and install Adobe Camera Raw 5.4
-
Unable to read net files from Nikon D800
purchased Nikon D800
have cs5
updated Adobe manager as suggested
closed all adobe products
Tried installing Adobe patch installer- Adobe 7.1 update,
Update Failed- not applicable for me
Still cannot read NEF files,
I would like to read NEF files from Nikon D800 in bridge and photoshop.
Any suggestions?
Thank you
Karla ChouhanThe D800 is supported in Camera Raw 7.1 and higher
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
CS5 is not compatible with Camera Raw 7 and higher. You need CS6 (paid for upgrade or join the Adobe Cloud).
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Or stay with CS5 and use the free DNG converter to convert all D800 Raw files to DNG then edit the DNGs in Bridge and Photoshop
http://www.adobe.com/products/photoshop/extend.displayTab2.html
Maybe you are looking for
-
Beware - 20" Cinema dead after 34 days
Bought it 9/1/05 and on 10/4 it won't power up. Light stayed on solid but screen stays black and buttons do nothing. Hooked it up to a different Mac with same result. Called Apple and they had no advice and they sent me to a CompUSA to get it fixed.
-
Can you add a custom shortcut?
I've been sending low res dailies out, and the only way I have found to do a super low res version is the" File>share>email" option So I am wanting to create a shortcut. I HAVE googled it. All the instructions see to show how to reassign a shortcut o
-
ORA-04030 while generating HTML files
While generating HTML files out of the database, combining XML type and structured data, and storing these files in XDB filesysteem. I get the following error. ORA-04030: out of process memory when trying to allocate 2048 bytes (cursor work he,kghsse
-
iPhone 4S with the latest updates 8.1.3 (12B466) installed. When I switch back to an ongoing application, from the switcher, it reverts to its own 'homepage' rather than the stay at the state/stage I left it at. How can I force applications to mainta
-
Portal runtime error - for Universal Worklist
Hi All, We have upgraded SAP Portal from 7.0 to 7.3 Ehp1, after upgrade we faced some issues and have resolved those. Right now some tabs in the portal is working fine whereas Universal Worklist and some tabs are throwing runtime error, where it show