User unknown

In System Properties under Advances and User Profiles there is a User Unknown.Is it ok to delete?
Paul Napolitano

Hi,
Please run lusrmgr.msc or click Control Panel\All Control Panel Items\User Accounts\Manage Accounts to view what accounts are actually stored in this system.
Perform a security malware scan to make sure that it is not created by some malware (just to be safe).
Have you ever formatted your system partition? My another guess is that it’s probably a user account from another OS or
previous OS that has been removed or recently deleted because any “format” action.
If you’re annoying with this unknown user profile, I suggest you backup your system, create a restore, then delete the user profile for a test.
Yolanda Zhu
TechNet Community Support

Similar Messages

Recipient address rejected: User unknown in relay recipient table

Running GW 7.0.3 on NW 6.5.6. Can anyone tell me if this is my problem or if it is the recipients system. Other email to the same domain goes through.
Thanks,
Bill

On 1/20/2010 10:05 AM, [email protected] wrote:
> The email was sent to 2 individuals at sl*****, but only one went out
> without error.
> 14:05:00 210 MSG 280915 Processing inbound message:
> SHINET/MAIL:\PPCINET\WPGATE\GWIA\receive\006705B4.888
> 14:05:00 210 MSG 280915 Sender: M*************@pubpress.com
> <mailto:M*************@pubpress.com>
> 14:05:00 210 MSG 280915 Recipient: p****@pubpress.com
> <mailto:p****@pubpress.com>
> 14:05:00 210 MSG 280915 Recipient: k****@pubpress.com
> <mailto:k****@pubpress.com>
> 14:05:00 210 MSG 280915 Recipient: c*****@slackinc.com
> <mailto:c*****@slackinc.com>
> 14:05:00 210 MSG 280915 Recipient: a*****@slackinc.com
> <mailto:a*****@slackinc.com>
> 14:05:00 210 MSG 280915 Building message: sb50760c.152
> 14:05:00 210 Recipient: a*****@sl*****.com <mailto:a*****@sl*****.com>
> 14:05:00 210 Recipient: c*****@sl*****.com <mailto:c*****@sl*****.com>
> 14:05:00 210 MSG 280915 Queuing to MTA
> 14:05:01 383 DMN: MSG 280917 Send Failure: 550 5.1.1
> <a*****@slackinc.com <mailto:a*****@slackinc.com>>: Recipient address
> rejected: User unknown in relay recipient table
> 14:05:16 109 MSG 280934 Analyzing result file:
> SHINET/MAIL:\PPCINET\WPGATE\GWIA\result\rb50760c.152
> 14:05:16 109 MSG 280934 Detected error on SMTP command
> 14:05:16 109 MSG 280934 Command: RCPT TO:<a*****@sl*****.com
> <mailto:a*****@sl*****.com>>
> 14:05:16 109 MSG 280934 Response: 550 5.1.1 <a*****@sl*****.com
> <mailto:a*****@sl*****.com>>: Recipient address rejected: User unknown
> in relay recipient table
> 14:05:16 109 Building undeliverable message
> 14:05:16 109 MSG 280934 Building message: sb50761c.155
>
> >>> Massimo Rosen<[email protected]> 1/20/2010 11:28:AM >>>
> Hi,
>
> > "[email protected]" wrote:
> >
> > Running GW 7.0.3 on NW 6.5.6. Can anyone tell me if this is my
> > problem or if it is the recipients system. Other email to the same
> > domain goes through.
>
> Impossible to say without more details, precisely GWIA logs. The only
> way how this could be a problem on your side is if GWIA is talking to
> the wrong server. That has been a problem in the past occasionally, and
> is often DNS related, e.g could be a problem of the OS even. Of course,
> in that regard, SP6 for NW65 is old. I'd suggest to install SP8 anyways.
>
> CU,
> --
> Massimo Rosen
> Novell Product Support Forum Sysop
> No emails please!
> http://www.cfc-it.de
>
>
The rejection seems to be on their side.

ACS user unknown though username in Server

All, Im facing very strange issue with my TACACS authentication. Normaly i connect my DC via SSL Anyconnect VPN then access all the Network devices, but since last week when i try to connect ASA i couldnt log in. I have user name in ACS server and the password authentication would redirect to RSA server. I can access other devices using my TACACS username and RSA passcode, but not only the ASA box. As rest of my team member can still access the ASA with their userid and passcode i dont think any issue in ASA box.
The error log message in ACS server is ACS user unknown.

To me it seems the shared secret being used on ASA to communicate with tacacs is mis-matched and that's a reason you are getting "ACS user unknown". This should be a problem all users who are trying to do ssh on ASA and authenticating against tacacs server. Why share-secret could be an issue because the shared secret being used to encrypt the packet is not same while decryption and that's why we are seeing unknown username.
~BR
Jatin Katyal
**Do rate helpful posts**

Using Enterage 12.3.5 getting 5.1.1 User Unknown after Send Recieve

When using Office 2008's Enterage, get a error message 5.1.1 User Unknown after hitting Send/Recive All opton. The product works fine in all other respects.

got the problem. i am running oraesb as sysdba which i should not do.

Mavericks mail server "user unknown" error

For some reason, the mail server bounces the email sent to local network users and returns a "user unknown" error. The same error is received when an email from an external domain is sent to one of the open directory associated email addresses.
However, sending email from these accounts works just fine, just like sending and receiving email associated with the diradmin account.

Hi Jeffrey,
Changed the mx record to the juffrou......net domain, without succes.
Please find the export below.
Regards,
Lex
juffrouwjannie:~ xandstorm-juffrpuw-jannie$ sudo serveradmin settings mail
Password:
mail:postfix:smtpd_pw_server_security_options:_array_index:0 = "cram-md5"
mail:postfix:smtpd_pw_server_security_options:_array_index:1 = "digest-md5"
mail:postfix:smtpd_pw_server_security_options:_array_index:2 = "gssapi"
mail:postfix:smtpd_pw_server_security_options:_array_index:3 = "login"
mail:postfix:smtpd_pw_server_security_options:_array_index:4 = "plain"
mail:postfix:spam_quarantine = "[email protected]"
mail:postfix:smtp_reject_list_enabled = no
mail:postfix:smtp_sasl_auth_enable = no
mail:postfix:submit_cred:juffrouwjannie.vanderwerff.net:username = "submit"
mail:postfix:submit_cred:juffrouwjannie.vanderwerff.net:password = "lvFBZ9973YcUBWtAPEX7Dq"
mail:postfix:submit_cred:XANDSTORM-JUFFRPUW-JANNIEs-Mac-mini.local:username = "submit"
mail:postfix:submit_cred:XANDSTORM-JUFFRPUW-JANNIEs-Mac-mini.local:password = ""
mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_userid = ""
mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_pwd = ""
mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_host = ""
mail:postfix:client_permit_mynetworks = yes
mail:postfix:smtpd_tls_cert_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.cert.pem"
mail:postfix:maps_rbl_domains_enabled = yes
mail:postfix:spam_subject_tag = "***JUNK MAIL*** "
mail:postfix:smtpd_tls_CAfile = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.chain.pem"
mail:postfix:message_size_limit_enabled = yes
mail:postfix:virus_db_last_update = "2014-04-19 19:50:45 +0000"
mail:postfix:mail_enabled_groups = _empty_array
mail:postfix:add_whitelist_domain:_array_index:0 = "XANDSTORM-JUFFRPUW-JANNIEs-Mac-mini.local"
mail:postfix:add_whitelist_domain:_array_index:1 = "vanderwerff.net"
mail:postfix:virus_scan_enabled = no
mail:postfix:spam_notify_admin_email = "[email protected]"
mail:postfix:virus_db_log_level = "info"
mail:postfix:black_hole_domains:_array_index:0 = "zen.spamhaus.org"
mail:postfix:spam_ok_locales = "en"
mail:postfix:spam_scan_enabled = yes
mail:postfix:virus_quarantine = "[email protected]"
mail:postfix:reject_unauth_piplining_enabled = no
mail:postfix:spam_rewrite_subject = yes
mail:postfix:message_size_limit = 10485760
mail:postfix:mynetworks:_array_index:0 = "127.0.0.0/8"
mail:postfix:mynetworks:_array_index:1 = "[::1]/128"
mail:postfix:virus_log_level = "info"
mail:postfix:host_whitelist:_array_index:0 = "juffrouwjannie.vanderwerff.net"
mail:postfix:rbl_override_list = _empty_array
mail:postfix:greylist_enabled = no
mail:postfix:list_server_log_level = "info"
mail:postfix:group_expansion:start_interval = 10
mail:postfix:group_expansion:enable_group_expansion = no
mail:postfix:virus_notify_recipients = no
mail:postfix:luser_relay_enabled = no
mail:postfix:mydomain = "vanderwerff.net"
mail:postfix:enable_list_server = yes
mail:postfix:mydestination:_array_index:0 = "localhost"
mail:postfix:mydestination:_array_index:1 = "$mydomain"
mail:postfix:virus_notify_admin_email = "[email protected]"
mail:postfix:enable_virtual_domains = no
mail:postfix:spam_notify_admin = no
mail:postfix:required_hits = 6
mail:postfix:add_whitelist_host:_array_index:0 = "juffrouwjannie.vanderwerff.net"
mail:postfix:always_bcc_enabled = no
mail:postfix:enable_var_mail = no
mail:postfix:enable_smtp = yes
mail:postfix:smtpd_tls_key_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.key.pem"
mail:postfix:relayhost = ""
mail:postfix:mynetworks_enabled = no
mail:postfix:virtual_domains = _empty_array
mail:postfix:spam_ok_languages = "en"
mail:postfix:rbl_override_enabled = no
mail:postfix:log_rolling_days = 1
mail:postfix:enable_smtp_in = yes
mail:postfix:virtual_users_maps = _empty_array
mail:postfix:tls_server_options = "require"
mail:postfix:spam_action = "deliver"
mail:postfix:log_rolling_days_enabled = yes
mail:postfix:list_server_post_to_archve = no
mail:postfix:spam_log_level = "warn"
mail:postfix:smtp_uce_controlls = 1
mail:postfix:relayhost_enabled = no
mail:postfix:list_server_share_archives = no
mail:postfix:virus_action = "delete"
mail:postfix:virus_db_update_days = 12
mail:postfix:virus_notify_admin = no
mail:postfix:domain_whitelist:_array_index:0 = "XANDSTORM-JUFFRPUW-JANNIEs-Mac-mini.local"
mail:postfix:domain_whitelist:_array_index:1 = "vanderwerff.net"
mail:postfix:enable_smtp_out = yes
mail:postfix:text_only_attachments = no
mail:postfix:reject_unknown_client_enabled = no
mail:postfix:log_level = "info"
mail:postfix:myhostname = "juffrouwjannie.vanderwerff.net"
mail:global:auto_auth = no
mail:global:skip_enable_service_check = no
mail:global:service_data_path = "/Library/Server/Mail"
mail:imap:aps_topic = "com.apple.mail.XServer.0051960a-2429-481a-b784-c073eed597e1"
mail:imap:servername = ""
mail:imap:imap_auth_clear = yes
mail:imap:auth_gssapi_hostname = ""
mail:imap:admins = _empty_array
mail:imap:lmtp_luser_relay_enabled = no
mail:imap:lmtp_luser_relay = ""
mail:imap:pop_auth_clear = yes
mail:imap:enable_listid_autosave = "no"
mail:imap:max_imap_connections = 1000
mail:imap:log_level = "info"
mail:imap:tls_key_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.key.pem"
mail:imap:imap_auth_plain = yes
mail:imap:postmaster_address = "[email protected]"
mail:imap:quotawarn = 80
mail:imap:enable_quota_warnings = no
mail:imap:pop_auth_gssapi = no
mail:imap:junk_mail_userid = "junkmail"
mail:imap:global_quota = 0
mail:imap:partitions = _empty_array
mail:imap:tls_ca_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.chain.pem"
mail:imap:enforce_quotas = no
mail:imap:not_junk_mail_userid = "notjunkmail"
mail:imap:imap_auth_digest_md5 = yes
mail:imap:request_enable_webmail = no
mail:imap:client_cert_enabled = no
mail:imap:aps_topic_enabled = yes
mail:imap:imap_auth_gssapi = no
mail:imap:tls_server_options = "require"
mail:imap:pop_auth_apop = yes
mail:imap:quota_full_tempfail = yes
mail:imap:imap_urlauth_host = " "
mail:imap:enable_imap = yes
mail:imap:postmaster = "postmaster"
mail:imap:enable_pop = yes
mail:imap:partition-default = "/Library/Server/Mail/Data/mail"
mail:imap:imap_auth_login = yes
mail:imap:enable_sieve = yes
mail:imap:imap_auth_cram_md5 = yes
mail:imap:notification_server_enabled = yes
mail:imap:tls_cert_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.cert.pem"

WBM User Unknown - firewall config change

In my Security Log I have been seeing a strange message that keeps appearing, see below.
I have no idea what this is or if this is someone hacking my router or if a virus is on my computer. It has appeared even during times when my computer has been turned off. I have my firewall set at max security and changed my password. Even after changing my password this appeared. Not sure what this is or what to do about it but I am very concerned.
Firewall Setup Configuration change
WBM user Unknown (0.0.0.0) has changed security settings[repeated 5 times, last time on Aug 25 03:00:26 2010]

This explanation was given by Actiontec (they build the router for Verizon)
Product:MI424WR (Rev. I) - Wireless Broadband Router
Incident Summary
=========================
Since Verizon can't answer this question I would like to know for the
people who built this router.
Verizon Actiontec MI242WR (not sure of Rev)
firmware 40.19.36
Why do I get this log security event every day?
mmm dd hh:mm:ss yyyy
Firewall Setup Configuration change WBM user Unknown (0.0.0.0) has
changed security settings
=========================
Resolution:
=========================
Each and every day, Verizon has a server that makes contact with your
router to check its firmware.
No changes are made to your router however, it simply checks the router
to make sure the firmware is up to date and this generates a log entry.
=========================

Postifx user unknown in local recipient table

Good morning --
My fetchmail job has been failing to get mail to my mailbox with this error (presumably from Postfix):
SMTP error: 450 4.1.1 <username@localhost>: Recipient address rejected: User unknown in local recipient table
(I replaced the actual user name with "username")
I'm not sure what to make of this. "username" definitely exists -- I just su'd into his account and ran the fetchmail job that gave me the error.
The problem goes away if I stop and restart postfix, but it seems to come back pretty consistently (I haven't had a chance to figure out the precise timing).
Any suggesitons?

Thanks, Mihalis.
I do not us su -l -- just plain old su. And echo $USER returns the correct user (that is, the one I su'd into).
I don't think the problem is fetchmail. It's the same result whether I run it from the prompt ("fetchmail -v") or from the user's cron.
The problem resolves temporarily if I restart postfix, but it returns within a few cycles (the cron job runs every three minutes.
The error message repeats itself for each mail item that fetchmail parses. Here's the last bit of a fetchmail's results:
fetchmail: SMTP> RSET
fetchmail: SMTP< 250 2.0.0 Ok
fetchmail: not flushed
fetchmail: POP3> LIST 12
fetchmail: POP3< +OK 12 4337
fetchmail: POP3> RETR 12
fetchmail: POP3< +OK 4337 octets follow.
fetchmail: reading message [email protected]@mail.XX.com:12 of 12 (4337 octets)
fetchmail: SMTP> MAIL FROM:<[email protected]> SIZE=4337
fetchmail: SMTP< 250 2.1.0 Ok
fetchmail: SMTP> RCPT TO:<XX@localhost>
fetchmail: SMTP< 450 4.1.1 <XX@localhost>: Recipient address rejected: User unknown in local recipient table
fetchmail: SMTP error: 450 4.1.1 <XX@localhost>: Recipient address rejected: User unknown in local recipient table
fetchmail: SMTP> RSET
fetchmail: SMTP< 250 2.0.0 Ok
...fetchmail: not flushed
fetchmail: POP3> QUIT
fetchmail: POP3< +OK Bye-bye.
fetchmail: SMTP> QUIT
fetchmail: SMTP< 221 2.0.0 Bye
fetchmail: 6.3.8 querying mail.XX.com (protocol POP3) at Mon, 21 Jan 2008 18:58:12 -0500 (EST): poll completed
fetchmail: normal termination, status 0

Fetchmail, Postfix user unknown in local recipient table

Hello all --
My fetchmail job has been failing to get mail to my mailbox with this error:
SMTP error: 450 4.1.1 <username@localhost>: Recipient address rejected: User unknown in local recipient table
(I replace my actual user name with "username")
The problem goes away temporarily if I stop and restart postfix, but it comes back almost immediately.
I'm having a hard time finding any clues in postfix's log. I'm not too sure what to look for, and it's pretty voluminous!
Any suggestions?

AlanNYC wrote:
If I turn off local recipient checking, will I actually get my mail?
Yes, all email properly addressed should be delivered to you without problems.
The line only affects improperly addressed email, in this case allowing them to be accepted instead of rejected.
Since you are running Spamassassin and an IMAP server, I suggest also using the line
luser=[email protected]
which will send all improperly addressed mail to the address specified by "[email protected]". This is what I meant by "catch-all" address.
If you find postfix giving you problems after adding the lines, simply delete them or comment them out by adding a hash mark to the front of the line, e.g.
#localrecipientmaps =
Alternatively, you can simply make no changes and allow the log messages to accumulate. The messages mean that postfix is doing its job by rejecting email addressed to users that don't exist. The above steps allow you to receive mail addressed to [email protected], where "anything" is any string allowed in an email address.
I assume you're testing your changes using a separate email account, but in case you're not: sign up for a free email account with any of a number of free email services (Gmail, Yahoo) and test your postfix install as you make changes using the free account.

User unknown in local recipient table

I have some of my mail users getting this error:
(reason: 550 5.1.1 <<[email protected]>: Recipient address rejected: User unknown in local recipient table)
It also comes in this form:
Action: failed
Status: 5.6.0
Diagnostic-Code: x-unix; user1: Mailbox does not exist
user1 and domain.com changed to protect the innocent.
Any thoughts on what might be causing this?

Here's the output from postconf -n
= = = = = = = = = = = = = = = = = = = =
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
disablevrfycommand = yes
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = _postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 104857600
mydestination = $myhostname,localhost.$mydomain,localhost,mycompany.com
mydomain = mycompany.com
mydomain_fallback = localhost
myhostname = mail.mycompany.com
mynetworks = 127.0.0.0/8
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
ownerrequestspecial = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpdclientrestrictions = permitsaslauthenticated, permit_mynetworks, rejectrblclient zen.spamhaus.org, permit
smtpddatarestrictions = permit_mynetworks, rejectunauthpipelining, permit
smtpdenforcetls = no
smtpdhelorequired = yes
smtpdhelorestrictions = permitsaslauthenticated, permit_mynetworks, checkheloaccess hash:/etc/postfix/helo_access, rejectnon_fqdnhostname, rejectinvalidhostname, permit
smtpdpw_server_securityoptions = cram-md5,login
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdsenderrestrictions = permitsaslauthenticated, permit_mynetworks, rejectnon_fqdnsender, permit
smtpdtlsCAfile = /etc/certificates/mail.mycompany.com.chcrt
smtpdtls_certfile = /etc/certificates/mail.mycompany.com.crt
smtpdtls_keyfile = /etc/certificates/mail.mycompany.com.key
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = yes
unknownlocal_recipient_rejectcode = 550
virtualaliasmaps = hash:/var/mailman/data/virtual-mailman
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
= = = = = = = = = = = = = = = = = = = =
real company = "mycompany"

SL mail (status=bounced (User unknown in virtual alias table))

Hello
I have setup mail with 6 locally hosted virtual domains. I created shortnames on workgroup manager with the complete address for the user. After some good results i start getting "status=bounced (User unknown in virtual alias table)". Also the shortname (with the domain name) created for the first virtual host name becomes grey ( like the default )
If i only setup one virtual domain everything works great, but with more than one it starts sending this message in the smtp log.
i dont know if this got something to do with the fact that my host name is mail.example.com and my domain name is example.com.
Hope someone can help me

I'm have the exactly this issue on a new SL server mac-mini. Someone help!

Access denied error when Loading document library for "contribute" users : Unknown SPRequest error occurred. More information: 0x80070005

Hi,
We are facing a very strange issue on a SharePoint Publishing portal. Domain users (contribute level access) have access to document libraries under specific sub sites. Every morning if they try to access the document library pages, users complain about "Access Denied" issue on document library page. But if a SP Farm admin account login on site, and browse to document library page, access denied issue seems to disappear for end users also. For whole day it works fine. But next day access denied error occurs again. I am not sure why this is happening. I have looked into Event Log and SharePoint Logs, found following information useful, but not sure what to do next.
Please help.
Event log Details:
Server: WFE01
Event Type: Error
Event Source: Office SharePoint Server
Event Category: Publishing
Event ID: 5169
Date:  17/11/2009
Time:  07:47:31
User:  N/A
Computer: SPWFE01
Description:
Console Configuration File Error: XML Exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
SP Log files:
All logs are for process: w3wp.exe (0x031C)                       0x17F4 Windows SharePoint Services
·     Begin OnLoad of XmlConsoleDataSource from file "EditingMenu".
·     Attempting to load XML from config file "EditingMenu".
·     PermissionMask check failed. asking for 0x00010000, have 0x00000000
·     Unknown SPRequest error occurred. More information: 0x80070005
·     Access Denied for /Projects/LFB/03 Bid Stage 1/Forms/AllItems.aspx.
·     StackTrace: Microsoft.SharePoint.Utilities.SPUtility:Void HandleAccessDenied(System.Exception), Microsoft.SharePoint.SPGlobal:Void HandleUnauthorizedAccessException(System.UnauthorizedAccessException), Microsoft.SharePoint.Library.SPRequest:Void OpenWeb(System.String, System.String ByRef, System.String ByRef, System.String ByRef, System.Guid ByRef, System.String ByRef, UInt32 ByRef, System.Guid ByRef, UInt32 ByRef, UInt32 ByRef, UInt32 ByRef, UInt16 ByRef, Boolean ByRef, Int16 ByRef, UInt32 ByRef, Int16 ByRef, Int16 ByRef, Int16 ByRef, Boolean ByRef, Int16 ByRef, UInt32 ByRef, Int16 ByRef, Int16 ByRef, Int16 ByRef, Int16 ByRef, Int32 ByRef, Boolean ByRef, System.String ByRef, System.String ByRef, Int32 ByRef, Int16 ByRef, ...
...System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.Object ByRef, Boolean ByRef, UInt64 ByRef, Boolean ByRef, Boolean ByRef, System.Guid ByRef, System.Guid ByRef, Int32 ByRef, System.DateTime ByRef, System.DateTime ByRef, System.String ByRef), Microsoft.SharePoint.SPWeb:Void InitWeb(), Microsoft.SharePoint.SPWeb:Microsoft.SharePoint.SPSecurableObjectImpl get_SecurableObjectImpl(), Microsoft.SharePoint.SPWeb:Microsoft.SharePoint.SPRoleAssignmentCollection get_RoleAssignments(), Microsoft.SharePoint.Publishing.WebControls.ConsoleXmlUtilities:System.String ConfigurationXml(System.String, Boolean), Microsoft.SharePoint.Publishing.W...
...ebControls.ConsoleXmlUtilities:Microsoft.SharePoint.Publishing.WebControls.ConsoleNode GetConsoleNodeCollectionFromXmlFile(System.String, Boolean), Microsoft.SharePoint.Publishing.WebControls.XmlConsoleDataSource:Void LoadTreeFromConfigXml(), Microsoft.SharePoint.Publishing.WebControls.XmlConsoleDataSource:Void OnLoad(System.EventArgs), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Page:Vo...
...id ProcessRequestMain(Boolean, Boolean), System.Web.UI.Page:Void ProcessRequest(Boolean, Boolean), System.Web.UI.Page:Void ProcessRequest(), System.Web.UI.Page:Void ProcessRequestWithNoAssert(System.Web.HttpContext), System.Web.UI.Page:Void ProcessRequest(System.Web.HttpContext), System.Web.HttpApplication+CallHandlerExecutionStep:Void System.Web.HttpApplication.IExecutionStep.Execute(), System.Web.HttpApplication:System.Exception ExecuteStep(IExecutionStep, Boolean ByRef), System.Web.HttpApplication+ApplicationStepManager:Void ResumeSteps(System.Exception), System.Web.HttpApplication:System.IAsyncResult System.Web.IHttpAsyncHandler.BeginProcessRequest(System.Web.HttpContext, System.AsyncCallback, System.Object), System.Web.HttpRuntime:Void ProcessRequestInternal(System.Web.HttpWorkerReque...
...st), System.Web.HttpRuntime:Void ProcessRequestNoDemand(System.Web.HttpWorkerRequest), System.Web.Hosting.ISAPIRuntime:Int32 ProcessRequest(IntPtr, Int32),
·     Releasing SPRequest with allocation Id {E3BC24ED-F243-4DBD-8625-EE7CF9FDA039}
·     Exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
·     Console Configuration File Error: XML Exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
·     Releasing SPRequest with allocation Id {D1A87724-6FB6-4009-B6D1-D7E15918E213}
Pryank Rohilla
MCTS, MCAD

Hi pryank,
From the log, it seems that the users don’t have permission on this page:
/Projects/LFB/03 Bid Stage 1/Forms/AllItems.aspx
Does the sub site have unique permission instead of inheriting permission from the parent site? If no, you need to make the sub site to inherit permission from the site collection so that master page also inherits the right. If this is not allowed in your organization, please go to “Site Actions”à “Site Settings” à “Master Pages and Page Layouts” to give users permissions on this document library.
Hope this helps.
Lu Zou

Mailman + Postfix - User unknown

Hi all, I'm having some trouble installing mailman (who doesn't?) right now.
I tried everything. I followed EXACTLY what is said on our wiki (https://wiki.archlinux.org/index.php/Mailman) but still it's not working.
Actually the only thing that is not working is 'sending an email to the mailing list'. And this is quite important for a mailing list, I guess.
After spending hours trying, here is my current status:
I created a mailing list called pynochio, with [email protected] as the mailing list address.
Postfix reads my /var/lib/mailman/data/virtual-mailman file and applies the mapping. I'm sure about that because I changed the content of virtual-mailman (and then hashed it using postmap command) and the email postfix was trying to authenticate changed. (so there is no permission issue from this side)
But then postfix concludes that the user doesn't exist. Here are fresh logs from journalctl, just for you:
Mar 20 19:59:53 ks3100290 postfix/qmgr[26527]: 128382077C: from=<[email protected]>, size=1775, nrcpt=2 (queue active)
Mar 20 19:59:53 ks3100290 postfix/trivial-rewrite[26562]: warning: do not list domain too.gy in BOTH mydestination and virtual_mailbox_domains
Mar 20 19:59:53 ks3100290 postfix/trivial-rewrite[26562]: warning: do not list domain too.gy in BOTH mydestination and virtual_mailbox_domains
Mar 20 19:59:53 ks3100290 postfix/virtual[26567]: 128382077C: to=<[email protected]>, relay=virtual, delay=0.74, delays=0.65/0.03/0/0.07, dsn=5.1.1, status=bounced (unknown user: "[email protected]")
Mar 20 19:59:53 ks3100290 postfix/virtual[26567]: 128382077C: to=<[email protected]>, relay=virtual, delay=0.78, delays=0.65/0.03/0/0.1, dsn=2.0.0, status=sent (delivered to maildir)
This warning appears because in the tutorial we are said to put `too.gy` (our domain) in mydestination and because in my postfix database inside the `domain` table, `too.gy` is said to be virtual (transport=virtual). I don't know if it should be that way.
My problem is that I don't really know how postfix and mailman are supposed to communicate. Postfix is supposed to let mailman handle things since [email protected] is a list address but it doesn't.
I read some tutorials (on other distribs) and they are using lists.too.gy domain for their lists address (it seems easier) but it looks like there's a better way to do it and in the archlinux mailman documentation, we are not using such subdomain for our lists. So I want to do it the right, archlinux way.
There is `postfix_to_mailman.py` transport script thing but I read it's a bad practice...
Here is the output of `postconf -n` (which respects the mailman tutorial, once again):
alias_database = $alias_maps
alias_maps = hash:/etc/postfix/aliases, hash:/var/lib/mailman/data/aliases
broken_sasl_auth_clients = yes
command_directory = /usr/bin
config_directory = /etc/postfix
daemon_directory = /usr/lib/postfix
data_directory = /var/lib/postfix
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5
html_directory = no
inet_protocols = ipv4
local_recipient_maps = $alias_maps
local_transport = virtual
mail_owner = postfix
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = localhost, too.gy
mydomain = too.gy
myhostname = mail.too.gy
mynetworks_style = host
myorigin = $mydomain
newaliases_path = /usr/bin/newaliases
queue_directory = /var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relay_recipient_maps = hash:/var/lib/mailman/data/virtual-mailman
sample_directory = /etc/postfix/sample
sendmail_path = /usr/bin/sendmail
setgid_group = postdrop
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_sasl_auth_enable = yes
smtpd_sasl_local_domain = $mydomain
smtpd_sasl_path = /var/run/dovecot/auth-client
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = dovecot
smtpd_tls_auth_only = yes
smtpd_tls_cert_file = /etc/ssl/private/server.crt
smtpd_tls_key_file = /etc/ssl/private/server.key
smtpd_tls_loglevel = 1
transport_maps = hash:/etc/postfix/transport
unknown_local_recipient_reject_code = 550
virtual_alias_maps = hash:/etc/postfix/virtual, proxy:mysql:/etc/postfix/virtual_alias_maps.cf, hash:/var/lib/mailman/data/virtual-mailman
virtual_gid_maps = static:5000
virtual_mailbox_base = /home/vmail
virtual_mailbox_domains = proxy:mysql:/etc/postfix/virtual_domains_maps.cf
virtual_mailbox_limit = 512000000
virtual_mailbox_maps = proxy:mysql:/etc/postfix/virtual_mailbox_maps.cf
virtual_minimum_uid = 5000
virtual_transport = virtual
virtual_uid_maps = static:5000
Any help appreciated. I'm on it since 10 hours, I don't want to kill myself.
EDIT: Forgot my `/etc/mailman/mm_cfg.py` >
# -*- python -*-
from Defaults import *
DEFAULT_URL_HOST = 'lists.too.gy'
DEFAULT_EMAIL_HOST = 'too.gy'
MTA = 'Postfix'
VIRTUAL_HOSTS.clear()
add_virtualhost(DEFAULT_URL_HOST, DEFAULT_EMAIL_HOST)
POSTFIX_STYLE_VIRTUAL_DOMAINS = ['too.gy']
DEFAULT_URL_PATTERN = 'http://%s/'
PUBLIC_ARCHIVE_URL = 'http://%(hostname)s/archives/%(listname)s'
MAILMAN_SITE_LIST = 'mailman'
Last edited by toogy (2014-03-20 19:23:23)

AlanNYC wrote:
If I turn off local recipient checking, will I actually get my mail?
Yes, all email properly addressed should be delivered to you without problems.
The line only affects improperly addressed email, in this case allowing them to be accepted instead of rejected.
Since you are running Spamassassin and an IMAP server, I suggest also using the line
luser=[email protected]
which will send all improperly addressed mail to the address specified by "[email protected]". This is what I meant by "catch-all" address.
If you find postfix giving you problems after adding the lines, simply delete them or comment them out by adding a hash mark to the front of the line, e.g.
#localrecipientmaps =
Alternatively, you can simply make no changes and allow the log messages to accumulate. The messages mean that postfix is doing its job by rejecting email addressed to users that don't exist. The above steps allow you to receive mail addressed to [email protected], where "anything" is any string allowed in an email address.
I assume you're testing your changes using a separate email account, but in case you're not: sign up for a free email account with any of a number of free email services (Gmail, Yahoo) and test your postfix install as you make changes using the free account.

HT4759 I tried to download icloud for pc windows vista with 2.1.2. and when download was almost complete it said it belonged to another user unknown to me so I stopped the process how do I start over?

I tried to download icloud for pc windows vista with 2.1.2 and when it was downloading almost finished it said it belonged to an unknown to me user?

You need to explain that, before you finished downloading something said that it belonged to another user ?
What said that, can you post a screenshot?

SFTP in Krusader as user: "Unknown error"

Hello,
I would like to connect to various sftp-servers using Krusader, but most* of my attempts fail, and I get the following error message:
Unknown error:
SFTP error: 1
Execution of the ssh program didn't succeed.
(1st line verbatim, 2nd and 3rd backtranslation.)
Fish now seems to be working, but it was not always so, I used to get:
The process for the fish://<myserver> protocol died unexpectedly.
(verbatim)
Command line ssh/sftp works flawlessly, smb through Krusader too.
However, if I run Krusader as root, both sftp and fish works.
Moving ~/.kde4 or ~/.ssh doesn't help.
Maybe relevant: I use a non-default port for ssh.
I have both kdebase-runtime and kdelibs installed (mentioned in this thread), however I don't have a full KDE installed, I use Openbox. After an sftp attempt, 'ps -e' lists kio_sftp.
(It's possibly not some "recent Syu" bug, I have never tried it under Arch before.)
I'm actually out of ideas how to continue debugging, anybody else?
Thanks in advance.
*Actually it succeeds if it is my very first ssh/sftp activity since the last reboot. So I can reenable sftp-ability in Krusader by rebooting; restarting just Krusader, X or remote sshd doesn't help.

When you send mail to that "bad account", check the ldap access log. Suspect that there's a duplication of mail address with somebody having the same alternate address.
Look at that access log, for the search, and note the result. If "nentries=2", that's the problem
:

User unknown after Update

I updated my arch distribution and thought i could be lazy and handle the pacnew files automatically which was a bad idea.
Now i have the problem, that my user is not known to the system.
Whoami sasy: whoami: cannot find name for user ID 1000
/etc/passwd says:
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/false
daemon:x:2:2:daemon:/sbin:/bin/false
mail:x:8:12:mail:/var/spool/mail:/bin/false
ftp:x:14:11:ftp:/srv/ftp:/bin/false
http:x:33:33:http:/srv/http:/bin/false
nobody:x:99:99:nobody:/:/bin/false
dbus:x:81:81:System message bus:/:/bin/false
elk0:x:1000:100::/home/elk0:/bin/zsh
avahi:x:84:84:avahi:/:/bin/false
usbmux:x:140:140:usbmux user:/:/sbin/nologin
rtkit:x:133:133:RealtimeKit:/proc:/sbin/nologin
gdm:x:120:120:Gnome Display Manager:/var/lib/gdm:/sbin/nologin
ntp:x:87:87:Network Time Protocol:/var/lib/ntp:/bin/false
git:x:999:998:git daemon user:/:/bin/bash
uuidd:x:998:997::/:/sbin/nologin
mysql:x:89:89::/var/lib/mysql:/bin/false
kdm:x:135:135::/var/lib/kdm:/bin/false
polkitd:x:102:102:Policy Kit Daemon:/:/bin/false
I googled a lot but nothing worked yet (i even tried to revert to the backuped files. Now i am at the end of my linux knowledge and need help urgently.

I ran into the tex problem which is described here https://www.archlinux.org/news/texlive- … ervention/ and used pacdiff. Because i was lazy (yes shame on me, it will never happen again, hard lesson!), i just ran through the process which than has overwritten the passwd with passwd.pacnew, which has the following content:
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/false
daemon:x:2:2:daemon:/sbin:/bin/false
mail:x:8:12:mail:/var/spool/mail:/bin/false
ftp:x:14:11:ftp:/srv/ftp:/bin/false
http:x:33:33:http:/srv/http:/bin/false
uuidd:x:68:68:uuidd:/:/sbin/nologin
dbus:x:81:81:dbus:/:/sbin/nologin
nobody:x:99:99:nobody:/:/bin/false
As it seems now, this has also been done to the following files (backups of the old exists)
/etc/shadow
/etc/gshadow
/etc/group
So googling around someone with an similar sounding problem has resolved that by replacing the new files with the backups. So i did, but it didn't work.
Edit: pacman -Qii filesystem is giving me following List of backuped files:
UNMODIFIED /etc/fstab
UNREADABLE /etc/crypttab
UNREADABLE /etc/group
MODIFIED /etc/hosts
UNMODIFIED /etc/ld.so.conf
UNREADABLE /etc/passwd
UNREADABLE /etc/shadow
UNREADABLE /etc/gshadow
MODIFIED /etc/resolv.conf
UNMODIFIED /etc/motd
UNMODIFIED /etc/nsswitch.conf
MODIFIED /etc/shells
UNMODIFIED /etc/host.conf
UNMODIFIED /etc/securetty
MODIFIED /etc/profile
UNMODIFIED /etc/issue
Last edited by elk0 (2013-08-06 10:24:23)

User unknown

Similar Messages

Maybe you are looking for