User Variables values are not showing in Bex analyzer
Dear Friends,
I created a report in Bex analyzer ( Excel).
Now i want to show the variables values in the report.
i put text item there and click on it but in filter tab there is no variable is exist.
Any help will be highly appricated.
Regards
Naeem
dear i know how to display the variable values.
But unfortunatilly there is nothing appear in filter tab.
my variables are not in filter tab its empty.
i already choose the data provider.
regards
Malik
Similar Messages
-
Parameter values are not showing in in the Organization Parameter form
We have done a setup for an Inventory Organization.
Everything was working fine.
Values were showing everywhere.
We have lot of transactions done in the org also.
But suddenly yesterday when I was trying to open the Organization Parameter form for that specific organization, the form came up as blank and in the bottom the error is Query caused no records.
I have checked data is there in the base table mtl_parameters.
Value is coming for other organizations. Only one specific organization is having this issue.
Even in Examine, I have taken the last query run on that form and ran the same in back end database, I can see all values are there in the database.
But in frontend screen the values are not showing. even organization code also not showing.
Navigation is: Inv Super user --> Setup --> Organization --> ParameterHave you checked Organization Access to ensure that no one restricted that org?
Or shipping grants and roles?
I think there are quite a few places that you can restrict access. -
ST06 Screen values are not showing as ecpected
Hi Experts,
ST06 Screen values are not showing as expected like avg CPU idle time and min Swap space, page out and page in values etc.
All fileds are showing "Zero Values" since last week and i just found tht today.
I Went to
SM 36, All Configured standard jobs are SAP_COLLECTOR_FOR_PERFMONITOR, SAP_COLLECTOR_FOR_NONE_R3_STAT.. etc are running fine.
Restarted the SAPOSCOL service also.Please suggest me.Please find the Enclosed values..
Compare recent days for server cambsvr13 Date/time 27.06.2008 13:40:31
Average values for peak workload
Date Usr Sys Idl Pages in/h Pages out/h Swap space Lan packets/h Lan errors/h
avg avg avg max avg max avg max size min free max avg max avg
20080626 0 0 0 0 0 0 0 0 0 0 0 0 0
20080625 0 0 0 0 0 0 0 0 0 0 0 0 0
20080624 0 0 0 0 0 0 0 0 0 0 0 0 0
20080623 0 0 0 0 0 0 0 0 0 0 0 0 0
20080622 0 0 0 0 0 0 0 0 0 0 0 0 0
20080621 0 0 0 0 0 0 0 0 0 0 0 0 0
20080620 0 0 0 0 0 0 0 0 0 0 0 0 0
20080619 0 0 0 0 0 0 0 0 0 0 0 0 0
20080618 0 0 0 0 0 0 0 0 0 0 0 0 0
20080617 0 0 99 17,240 9,685 97,730 97,575 10485,760 9,023,492 22,430 21,205 0 0
20080616 0 0 99 7,260 3,978 101,340 97,418 10485,760 9,057,327 21,940 19,447 0 0
20080615 0 0 99 1,390 1,088 101,330
99,113 10485,760 9,162,058 16,199 15,970 0 0
Best Regards,
VinodTry stopping the SAPOSCOL NT service. Then, copy this folder (making a backup):
installdrive\usr\sap\prfclog to installdrive\usr\sap\prfclog_old
Then, clear out everything inside of installdrive\usr\sap\prfclog
Also, doens't hurt at this time to check the credential of the user running your SAPOSCOL, typically it should be the same as the user running your SAP instance.
Start SAPOSCOL and wait for the OS collector job to run. Give it 24 hours, come back and check. -
Key frame values are not showing
Does anyone know why my key frame values are not showing? How do I get them back?
See this about showing and hiding columns:
After Effects Help | General user interface items -
Excise values are not showing in billing
hi all,
In RG23D register BED, AED, ECS values are showing correctly, but in order (VA02) or in billing (VF01) excise values are not showing. So, what could be the reason and what need to be checked?
thanks.mohan prabu,
Its Surprising, how come it is not appearing in Order and billing but yet it is passed to register RG23D.
1. Check Whether you have maintained those condition types in your pricing procedure.
2. Check whether you have maintained VK11 i.e., Values for those Excise Condition Types.
3. Check whether you have activated Statistical indicator for those condition types.
4. Proceed performing Analysis in Item details --> Conditions Tab --> Click Analysis tab provided to check whether the conditio types has been executed or not.
5. Check your Config Settings
IMG --> LG --> Tax on Goods Movement --> India --> Basic Settings --> Determination of Excise Duty --> Maintain Excise Defaults
Check these initially and let us know your outcome...
Regards
Sathya -
Lov Values are not showing for Discoverer Reports in Application
Hi,
I developed some discoverer reports, those reports having parameters with LOV. Those LOV values are showing in Discoverer Desktop, but after registering those reports in Oracle applications those LOV values are not showing. Pls let me know how resolve this issue.
Regards,
Hanimi.Hi,
Also it is necessary to know how the LOVs are defined. Are they based on Application flexvalues for example? In which case it may be that you have not got your NLS language parameters set correctly when connecting from Applications.
Rod West -
Master data(0vtype) values are not showing in reports.
Hi Gurus,
I have an info object '0VALTYPE' with 'TEXT'. I already loaded the data in
for this object. but in reporting level i am getting the values # and 20(actual)
even though it has so many vales(ex: 10(plan)etc). but all the values are not populating in the query.how to get all the values in reporting level.
Thanks in advance.
Thanks
Raju.kHi Raju,
You have already confirmed, but still please go to infoobject 0VTYPE again and check the master data to see all values exits there.
If yes and still in reporting you can not see those, try doing the following:
1) Right click on 0VTYPE and click on "Activate Master Data", and/or
2) Go to Menu --> select Attribute change run --> select 0VTYE and execute the changes.
Regards
Pankaj -
Variable window not showing through BEx analyzer
HI Experts,
I am facing a weired situation with one of the variable.
I have a Customer Exit variable which is Input Ready and entry is Mandatory, i wrote some code in CMOD to fetch default values through I_STEP=1 and my requirement is that user should able to change the values if needed.
now, the problem is, I can able to get the variable input screen when i execute the query through RSRT with Query display mode as HTML. But when i execute the same query in BEx analyzer or through RSRT with different Query Display modes like List/Bex Analyzer am not getting the variable input screen.
The variable is taking the default value generated through CMOD code and the same values are being used in determining the query output..
Please suggest me what do i need to do inorder to view the Variable input screen in BEx analyzer.
I am using BEx Analyzer 3.x for the queries and working with
SAP Version -
SAP EHP 1 for SAP NetWeaver 7.0
DB: -
ORACLE 11.2.0.2.0
OS -
AIXI found the solution in one of the SAP notes and the issue is resolved.
We used Note: "1609237" to resolve the issue. Hope this might help anyone who faces this same problem.. -
Inventory Non cumulative values are not showing correct result
Hi Guys,
I have created a report on Inventory cube taking material in rows and 0T0TALSTCK and 0VALSTCKVAL in colums and i created a variable on calender day . What ever the date if we give we will get the quantity and value as on that date.
Here Quantity is showing perfectly and in case of value it is showing wrongly. In this case the interesting thing is if we substract the (Reciet value - Issue ) value then i am getting the correct value.
Some times Even quantity is zero the noncumulative keyfigure (0VALSTCKVAL)is not showing zero it is showing some value but if i do (Reciet value - Issue ) it will show correctly.
Please help on this issue.
Thanks & Regards
K.SrinivasHi,
when the quantity is correct, then you have a problem with the values. You have loaded the infocube correcly.
check your keyfigures and the transformation with the BI content.
=> for example: do you have the coding in the BF transformation?
* see OSS note 571669
LOOP AT SOURCE_PACKAGE ASSIGNING <SOURCE_FIELDS>.
IF <SOURCE_FIELDS>-stockcat EQ 'V' OR
<SOURCE_FIELDS>-stocktype EQ 'V'.
DELETE SOURCE_PACKAGE.
ENDIF.
ENDLOOP.
=> you have used the datasource 2LIS_03_UM. There are no quantities. Is there your problem.
Sven -
Actual YTD & MTD value is not showing in BEx report....
Dear Experts,
Thank you all for the suggestions and support in solving the issues.
I need your help once again in one of the complicated issues I am facing.
Details :
We are using one report Dealer Target.
This report uses YTD and MTD. It shows the Target value (Planning Cube ) and Actual Sales value ( Actual Sales ). Here we are getting the right value of planning but not picking the actual sales figure from Sales cube.
As we are using YTD and MTD :
Actual YTD should show the a net sales from 1st'April to till date .
And Actual MTD should show the 1st of any month to that date (User input).
But in our case , both Actual YTD and MTD is blank. That means , data is not getting populated.
We are using an USER EXIT for the requirement...
But I am not able to find the way to proceed to find the problem where its getting stucked..
Please suggest .. Waiting for your valuable response.
Thanks,
Sanjana.Hi,
In this case have you restricted Value Type for Actuals as 10 and Budget as 20 ???
This may be the reason why you are not getting Actaul values, pls check for the same.
Regards,
Vishnu -
Values are not showing in report
Hi,
I have created a report with EVDRE containing several columns. When I use MemberSet: "SELF" for all columns, it shows me the data I have uploaded correctly.
However, if I choose "MEMBERS" for any of the columns, the value field is empty. This is totally incorrect as I get several rows with the "MEMBERS" option, and one of the rows contains exactly the same filtering as when I use "SELF" for all columns. So that row should show a value, but it is empty.
If I choose SUPRESS:Y, it returns 0 rows.
Example ("SELF" chosen):
NAMEID, ADDRESS, TIME, SALARY
A, X1, 2009, 10000
Example ("MEMBERS" chosen for NAMEID):
NAMEID, ADDRESS, TIME, SALARY
A, X1, 2009, (blank)
B, X2, 2009, (blank)
C, X3, 2009, (blank)
Has anyone encountered this before?
Thanks,
SamHey Sam,
I have some additional questions to help me understand what is going on.
What other dimensions exist in the application this report is running in, besides NAMEID, ADDRESS, TIME, SALARY?
What dimensions are in the COLKEYRANGE, besides SALARY?
What are your expansions set as (SELF, MEMBERS, etc) for the other row/column key dimensions?
Are you sure that all the other dimensions are not changing when you go from SELF to MEMBERS? I know this is probably not the case but I thought I would ask anyways. -
Threshold values are not showing in zeros and ones
Hi guys
I am thresholding an 16 bit unsinged image . There are few problem I am facing
1) when I look at values over the threshold images those are not in zeros and ones
2) How to change color of threshold image, by default it is red and black
I will appreciate help from you guys.
Solved!
Go to Solution.
Attachments:
Thresh_prob.jpg 52 KBLike this
-
Float values are not showing correctly.
I have my QA Trend Analysis Report in which I have field "mittelwert" whose data type is FLTP of length 16.
my internal table it_inspection contains...
mittelwert LIKE qamr-mittelwert.
and selecting from my select query below:
SELECT * FROM qamv AS qamv
JOIN qals AS qals
ON qamvprueflos = qalsprueflos
JOIN qamr AS qamr
ON qamrprueflos = qamvprueflos
AND qamrmerknr = qamvmerknr
AND qamrvorglfnr = qamvvorglfnr
INTO CORRESPONDING FIELDS OF TABLE it_inspection
WHERE qals~matnr IN s_matnr
AND qals~stat35 = p_ud
AND qals~pastrterm IN r_date.
I am getting values as below in my report ALV output:
6.000000000E+00
5.600000000E+00
6.100000000E+00
When I go and see in the tcode : qe01, by giving the Inspection lot values..
I have values as below which is of character type of length 16.
6.00
5.60
6.10
Here the probelm is how can I show the values above in the report output ?
Thanks in advance.Hi Sam,
Use the output from variable STRING in your ALV
This is similar to how it is done for the screen fields in your standard transaction
DATA
: MITTELWERT LIKE QAMR-MITTELWERT VALUE '6.000000000E+00',
STRING TYPE CHAR20.
CALL FUNCTION 'QSS4_FSTRING_AUSGEBEN'
EXPORTING
I_NOTINI = 'X'
I_FLOAT = MITTELWERT
I_DECIMALS = '2' "No of decimals you require in the standard it is 2
IMPORTING
E_STRING = STRING
* TABLES
* T_OPTIPOS = OPTIPOS
WRITE STRING.
Regards -
Excise values are not updating in billing
hi all,
In RG23D register BED, AED, ECS values are showing correctly, but in order (VA02) or in billing (VF01) excise values are not showing. So, what could be the reason and what need to be checked?
thanks.Hi MBS,
yes im doing depot process.
I maintained routine 356, and statistical
and i checked pricing procedure analysis tab, where all conditions are activated.
but still values are not fetching or shoeing in billing.
any other solutions.....
thanks. -
Condition records are not showing in Invoice
Hi Experts,
My List price for XXXX material is amount $$$$$. Condition records having required validity.
But the values are not showing in invoice though the pricing analysis shows green for this condition type.
Condition values shown perfectly in preceeding documents.
Analysis message says " Condition record exists but has not been set "
Can you please suggest me, why this condition values are not shown in net value and suggest me the fis.
Thank you in advance.
Edited by: Ganesh B on Feb 4, 2010 4:45 AMHi,
Goto the T. Code "VF03".
Enter your billing document number.Enter.Check what is the pricing procedure determined here.Goto the T.Code "V/08".Check whether that condition type present in that procedure.
If so check the validity of the condition records.Ensure it falls under your billing document date.Also ensure that it is not marked for deletion.For this goto the last column in the condition record screen "VK12 T.Code".Ensure that this check box is not ticked.
And you are telling that you are able get this one in previous documents.
Goto the T.Code "VTFA(if your scenario is order related billing)" else goto the T.Code "VTFL(If your scenario is delivery-related billing)".
Select your valid combination.Double click on item.Select your item category.Details.
Make the Pricing type as "D" and pricing source as "blank".
Regards,
Krishna.
Maybe you are looking for
-
I was trying to install the SEOQuake add on. After clicking install Firefox would hang up saying the script had timed out and asking if I want to stop it or continue. Didn't matter which option I chose nothing would happen. The only way to stop it wa
-
Hello, I just tried opening Itunes for the first time in a month or so and it said I needed to download an update with 11.5 (it seems) and quicktime. After running the update I get the following error message. iTunes.exe - Entry Point Not Found The
-
I have over 300 pictures on my phone...my question to someone iphone savvy is why, when I plug my phone into the computer is iPhoto showing no pictures? I want to delete them for space issues. Thanks
-
Sign-In ID Always having to Recrreate
Dear BlackBerry App World and Community I keep having a problem when I come to sign-in in my App World on my PC,! why is this? I was currently asked what could be better in a survey a week or two ago and my main comment was, wouldn't it be simple if
-
Shuffle does not play all my songs.
I have over 2000 songs, but the shuffle continues to stop around 1100. The other songs do not have the skip shuffle turned on. How do I get the iPod touch to play all the songs? Thanks, Kevin