User "wlisystem" has not been assigned task "Task 1"
Hi,
I am having problems executing a task thro' Worklist JSP. My env. is WLS 7.0 on Windows
NT.
I can do a Start Workflow and then click on the appropriate template.
Then, when I click on the task, I get the error (see below)
Any help please? This used to work fine in WLS 6.1.
User "wlisystem" has not been assigned task "Task 1". User "wlisystem" has not been
assigned task "Task 1". Start server side stack trace:
Workflow error: com.bea.wlpi.common.WorkflowException: The server
was unable to complete your request. User "wlisystem" has not been
assigned task "Task 1". at com.bea.wlpi.server.worklist.WorklistBean.taskExecute(Unknown
Source) at
com.bea.wlpi.server.worklist.WorklistBean_1nnm8f_EOImpl.taskExecute(WorklistBean_1nnm8f_EOImpl.java:151)
at
com.bea.wlpi.server.worklist.WorklistBean_1nnm8f_EOImpl_WLSkel.invoke(Unknown
Source) at
Thanks,
Just to be a little more clear, this works fine from the
Worklist Swing application but the same gives an error when
I execute from JSP page. The task seems to execute properly
but still the JSP page gives an error as shown below.
Anyone has experience with JSP workjlist on WLS 7.0 please??!
"SLN" <[email protected]> wrote:
>
Hi,
I am having problems executing a task thro' Worklist JSP. My env. is WLS
7.0 on Windows
NT.
I can do a Start Workflow and then click on the appropriate template.
Then, when I click on the task, I get the error (see below)
Any help please? This used to work fine in WLS 6.1.
User "wlisystem" has not been assigned task "Task 1". User "wlisystem" has
not been
assigned task "Task 1". Start server side stack trace:
Workflow error: com.bea.wlpi.common.WorkflowException: The
server
was unable to complete your request. User "wlisystem" has not been
assigned task "Task 1". at com.bea.wlpi.server.worklist.WorklistBean.taskExecute(Unknown
Source) at
com.bea.wlpi.server.worklist.WorklistBean_1nnm8f_EOImpl.taskExecute(WorklistBean_1nnm8f_EOImpl.java:151)
at
com.bea.wlpi.server.worklist.WorklistBean_1nnm8f_EOImpl_WLSkel.invoke(Unknown
Source) at
Thanks,
Similar Messages
-
CannotUser execute task -- " anonymous " has not been assigned task
Hi,
I'm trying to build a prototype a workflow using WLI Integration(WLPI).
I've created a workflow using WLPI Studio and am able to start the instances using
JMS messages. However, when I try to execute one of the task which I 've assigned
to user "admin" I get the following error. Please note that I have connected to
WLPI using "admin" user only and got a handle to worklist. It seems to be an issue
with security realm but I'm not able to figure out what it is...Can somebody help
me on it???
<Mar 26, 2003 5:46:55 PM EST> <Error> <BPM> <500212> <<wlpirequest>
<started>2003-03-26 17:46:55.332</started>
<requestor><anonymous></requestor>
<templateid>1</templateid>
<template-name>Test</template-name>
<templatedefinitionid>1</templatedefinitionid>
<instanceid>22001</instanceid>
<actions>
<error time="2003-03-26 17:46:55.362">WorkflowException: User "<anonymous>"
has not been assigned task "Identify Samp
les".</error>
</actions>
<completed>2003-03-26 17:46:55.372</completed>
</wlpirequest>
>
User "<anonymous>" has not been assigned task "Identify Samples".
User "<anonymous>" has not been assigned task "Identify Samples".Firstly Thanks for the response Chris.
I'm not using any combination of older version of WLS and 7.0. I've downloaded
the trial version of weblogic platform 7.0 and working on it.
I forgot to mention one thing that in order to fix the problem I have modified
the wlpi-ejb.jar to removethe method permissions.
Chris Stead <[email protected]> wrote:
Vinkal,
Since I see the requester identified as <anonymous>, I am assuming you
are trying some combination of inter operability between older versions
of WLS and 7.0. If that is the case, the following link may provide
some insight for your problem:
http://edocs.bea.com/wls/docs70/upgrade/upgrade6xto70.html#1050157
The only caveat is the fact that you are logged in as admin, which
should be an authenticated user for BPM, therefore not represented by
the guest user...Have you modified the permissions of the admin user?
Specifically removed the Execute_Template permission from admin?
Cheers,
Chris
Vinkal wrote:
Hi,
I'm trying to build a prototype a workflow using WLI Integration(WLPI).
I've created a workflow using WLPI Studio and am able to start theinstances using
JMS messages. However, when I try to execute one of the task whichI 've assigned
to user "admin" I get the following error. Please note that I haveconnected to
WLPI using "admin" user only and got a handle to worklist. It seemsto be an issue
with security realm but I'm not able to figure out what it is...Cansomebody help
me on it???
<Mar 26, 2003 5:46:55 PM EST> <Error> <BPM> <500212> <<wlpirequest>
<started>2003-03-26 17:46:55.332</started>
<requestor><anonymous></requestor>
<templateid>1</templateid>
<template-name>Test</template-name>
<templatedefinitionid>1</templatedefinitionid>
<instanceid>22001</instanceid>
<actions>
<error time="2003-03-26 17:46:55.362">WorkflowException: User "<anonymous>"
has not been assigned task "Identify Samp
les".</error>
</actions>
<completed>2003-03-26 17:46:55.372</completed>
</wlpirequest>
User "<anonymous>" has not been assigned task "Identify Samples".
User "<anonymous>" has not been assigned task "Identify Samples". -
Logical system name has not been assigned to
Hi, Expert
I m trying to transferr DATA from ECC to APO . when I configured my ECC and APO systems according the SCM 210, but I still meet the error like this
logical system name has not been assigned to
syste: user:
Function/Q/SAPAPO/CIF_PRODUCT_INBOUND
text: logical system name has not been assigned to
my ECC is ECC6.0,and APO 7.0
Can u help me,Thank u. I m waiting the solution on desk
Rockey
Edited by: Xinyou Dong on Jun 2, 2011 9:11 AMHi,
I think you dont have partner profile created.
Try to create one with the RFC which is connecting ECC and APO.
Thanks,
Deepthi -
Field symbol has not been assigned in Reuse_alv_grid_display
Hi Experts,
I display my output in alv grid format using REUSE_ALU_GRID_DISPLAY, there i have one editable field , when user click on save data that data will be saved , so in user command i write code like to check changed data
DATA : REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
IF REF_GRID IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
CALL METHOD REF_GRID->CHECK_CHANGED_DATA.
ENDIF.
when i execute the report i get dump with message
field symbol has not been assigned .
when i try in debug mode when call method ref_grid->check_changed_data , i get dump ,
Please suggest me
Thanks & Regards
KrishnaHi siva,
Check this thread [ALV with Edit and Save |editable ALv and SAVE criteria;
this will help u,
Thanks & regards
Kiran -
A unique company code has not been assigned to company number 1000
Dear Friends,
When I do Inter-Company Transaction thro Transaction Code FB60 it is giving me Error.
For Example: if I have 2 Company Codes - 8001 & 8002
I want to Post One Vendor Invoice
Ex:
Vendor - 301 ABC Ltd., 5000 Credit
400020 - Expenses 2000 Debit - Company Code - NGLC
(Then Debit Expenses G/L Account 460000 for Company Code NGLC1)
400020 - Expenses 3000 Debit - Company Code - 1000
(Then Debit Expenses G/L Account 460100 for Company Code 1000)
When I am going to POST it is giving me an Error please sees below.
Error Message
A unique company code has not been assigned to company number 1000
Message no. GLT0001
Diagnosis
Document breakdown is active in your system. In certain cases, a company code is derived from the company ID number, and this must lead to the assignment of a unique company code.
A unique company code could not be assigned to company number 1000.
System Response
You cannot carry out the required posting.
Procedure
Assign one company code to company number 1000.
Please tell me How to solve this issue.
Thanks in Advance,
RangaHi Ranga
Can you please check OBY6 settings (Additional details) for the co. codes, as it seems either multiple co. codes have been assinged to company number 1000 or none of the relevant co. codes have been assigned with company ID.
Regards -
An SLD system has not been assigned to logical system TEC101
Hello all
We are trying to send an message RFC or IDOC from our SRM (5.0) system to the XI (7.0). But we allways get the error
"An SLD system has not been assigned to logical system TEC101". In the SLD the system is visible, sldcheck works.
Does anyone know this problem and can give me a hint how to fix this problem?
Thanks a lot
StefanHi Stefan,
Is there a technical & Business System for SRM5.0 in SLD? If entry exists then confirm if the logical system name mentioned in Business System is TEC101.
If entry does not exist in SLD for SRM, then in SRM run t-code
1) SLDAPICUST .. Enter relevant details
2) RZ70 : Give XI Server details , activate and then Execute.
Once you do that you can see entry for SRM in SLD.
After that try running the schenario again.
Regards,
Sumit -
Error while MIRO posting: Unique co code has not been assigned to co number
Hi all
I am getting the following error while posting MIRO-
"A unique co code has not been assigned to co no". I think this might have to do something with CO no range. Is it so. Does any1 have any idea what this could be because of?
Thxs in advance
HrishiHi Vishnu
Thxs for ur immediate reply. But cross co conttrolling is not active in my case. The error diagnosis reads as follows-
Doc breakdown is active in ur system. In certain cases, a co code is derieved frm the Co ID no and this must lead to the assignment of a unique co code.
A unique co code could not be assigned to Co no.
Message No GLT0001 -
GL account has not been assigned for in customization
GL account has not been assigned for in customization
Message no. 8I447
Diagnosis
GL account has not been assigned for the excise a/c in customization
Procedure
Assign GL a/c for the excise a/c in CIN customization under : Accounting -> Assign GL accounts to excise groups and transaction typesHello ,
SPRO --. LOGISTICS GENERAL -. TAX ON GOODS MOVMENT -
> India -
. Act determination -
> 1) Define GL ACTS
2) Define Act types for T. COde
3) Define GL Act For Transaction and excise Groups
This settings are done by the Fi consultant.
FOr the Transaction Type DLFC you got to define the various debit and credit accounts.
Also in the nest transaction you got to assign the various GL acounts for the Transaction type DLFC :
Assign GL a/c for the excise a/c in CIN customization under : Accounting -> Assign GL accounts to excise groups and transaction types
thanks
deepak -
Logical system has not been assigned to any business grp
We have converted R/3 system (4.6c) from EBCDIC to ASCII. R/3 is integrated with SCM 5.0. Everything was fine before conversion. After Conversion, in SCM qRFC Monitor Inbound Queue (TCODE = SMQ2), we are getting the
error "Logical system &##ä<+è### has not been assigned to any business
system gr".
Error Message no. SR053
The problem happens because the logical system has strange value
in the inbound queues.
Preblem still persists even after performing various things:
Re-created and Activated the CIF Integration Models
Checked all settings in both systems
Ran CCR
Checked table CIFLOOKU
Any ideas are highly appreciated? Thanksthanks。 I have the same issues. like this:
Logical system I11CLNT800 has not been assigned to any business system group
Message no. /SAPAPO/CIF007
System Response
The data cannot be assigned to a logical system.
Procedure
Check if the logical system has been maintained, and assign the logical system to the business system group.
the I11CLNT800 is my ECC logic system. I had assigned it to ECC Client 800,and a BSG I11800 in APO system.
Can u give me any suggestions?
before, someone had suggested me to define partner profile in WE20 and WE21, but they does not work.
waiting on desk
thanks
Edited by: Xinyou Dong on Jun 3, 2011 1:01 PM -
The current user username has not been granted the ADVISOR privilege despite having it !
Hi,
I'm trying to follow ML note 2499931.1 'Using Dbms_Advisor.Tune_Mview To Optimize Materialized Views For Fast Refresh' and am receiving an error suggesting the user4 does Not have the Advisor privilege
despite the fact that it does. What am I missing ?
Every note I've found so far suggests granting the privilege is the fix.
I have and continue to receive the error.
Version 11.2.0.3 on Redhat 5
select * from dba_sys_privs where grantee = 'SOAUSER';
GRANTEE PRIVILEGE ADM
SOAUSER CREATE MATERIALIZED VIEW NO
SOAUSER CREATE VIEW NO
SOAUSER CREATE PUBLIC SYNONYM NO
SOAUSER SELECT ANY DICTIONARY NO
SOAUSER ON COMMIT REFRESH NO
SOAUSER CREATE ANY DIRECTORY NO
SOAUSER CREATE DATABASE LINK NO
SOAUSER SELECT ANY TABLE NO
SOAUSER ADVISOR NO
SOAUSER UNLIMITED TABLESPACE NO
SOAUSER CREATE SESSION NO
Error at line 2
ORA-13616: The current user SOAUSER has not been granted the ADVISOR privilege.
ORA-06512: at "SYS.PRVT_ADVISOR", line 4869
ORA-06512: at "SYS.DBMS_ADVISOR", line 1969
ORA-06512: at "SYS.PRVT_TUNE_MVIEW", line 490
ORA-06512: at "SYS.PRVT_TUNE_MVIEW", line 970
ORA-06512: at "SYS.DBMS_ADVISOR", line 739
ORA-06512: at line 3
Thanks in Advance
KenSorry, but the code I was receiving the error message for is essentially the same as the example in the note. Assumed people would have access to the note.
The statement is:
variable foo varchar2(20);
declare foo varchar2(20) := 'ken_foo';
begin
dbms_advisor.tune_mview(:foo,
'create materialized view ken_foo
as
select
papf.rowid R_papf,
paaf.rowid R_paaf,
gcc.rowid R_gcc,
papf.employee_number,
gcc.segment4 cost_center
from hr.per_all_people_f@atc_pp_to_ebs_atcllc papf,
hr.per_all_assignments_f@atc_pp_to_ebs_atcllc paaf,
gl.gl_code_combinations@atc_pp_to_ebs_atcllc gcc
where papf.person_id = paaf.person_id
--and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
--and trunc(sysdate) between paaf.effective_start_date and paaf.effective_end_date
and paaf.default_code_comb_id = gcc.code_combination_id');
end;
Per another forum the answer appears to be that sys didn’t have the advisor privilege.
Granted advisor to sys and ran the statement again as soauser and no error.
Thanks
Ken -
SLD system has not been assigned ? :-(
Hi Guys,
This is an easy question for SRM gurus =)
I need to send the PO in format XML to the vendors (using XI). When I try to send a PO I can see this error message in "Issue Purchase Order" option menu.
Information Date: 13.06.2006 Time: 10:19:38
Information Processing BBP_PO_SEND_XML Is Started
Error An SLD system has not been assigned to logical system SRDCLNT120
Error Action could not be successfully executed
Could anybody give me any help about this ? I have searched in sdn and oss without success =(
Thanks for your help !
Regards,
DiegoHi Christophe, my feedback:
A) In "Define backend system", I entered the XI alias name defined in tx: SLDAPICUST
B) Now the process doesnt throw any error in SRM, but the PO document is not arriving to XI neither =(
My questions are:
1. Should I put that alias in that field ? Or should I put the SLD server name? Should be an RFC conn name to XI?
2. Should I do anything additional to point 1? For example: in tx. SLBBP_RFCDEST the PO scenario is directed to "BBP_XML_PO". Should I made a change on this ?
Thanks for your help !
Best regrads,
Diego -
Regarding "Error An SLD system has not been assigned to logical system "
Hi all,
I am trying to connect SRM system to an XI system. All the settings are done (or I thought so). When I try to send a PO via XML/XI to the XI system in SRM Web UI, it gives me the following error:
nformation Processing BBP_PO_SEND_XML Is Started
Error An SLD system has not been assigned to logical system
Error Action could not be successfully executed
The backend systems are defined in spro. When I debugged the coding, I find that the right Logical system itself is not picked up - is there any thing missed out?
Thanks,
VijayHi,
You should assign this here:
Supplier Relationship Management -> SRM Server -> Technical Basic Settings -> Define Backend Systems.
Here you should fill the "System Landscape Directory Name" for the systems you have defined.
Regards
Kathirvel -
An SLD system has not been assigned to logical system
Hi masters
I trying send PO in XML to SUS through XI ,
but when try to send the SRM/EB system show the next message
Processing BBP_PO_SEND_XML Is Started
An SLD system has not been assigned to logical system
Action could not be successfully executed
in XI system I defined the SLD sistem for SRM/EB and SRM/SUS
that SLD name is settup into define system Landscape into colum System Land Directory Name
in SLDCHECK all is Ok on green light.
what can I do ?Hi. Nikhil.
In SRM/EB
1.- trying configurates SMXB_ADM
2.- Integratio Engine configration
3.- Role of Business System = Application System
4.- Corresponding Integ. Server = dest://RFC type H for XI system,
problem .
when I push bottom check (F7)
the message is the next
red light No access to system Landscape at present -
G/L Account has not been assigned for PONHLD customisation
Dear All,
I am getting an error while creating Excise Invoice, when I'm choosing the Choose Balance Tab in J1IIN, system is throwing an error message, "G/L Account has not been assigned for PONHLD customisation."
Can anybody help me,pls or if you can advise that should this tab be selected before processing any further with J1IIN?
Rgds,
IndrajitDear Hase,
Please to Revert the solution which you got. Because same Problem I am facing. I have done all the LG Tax setting. If you give in details i will be very much thankful....
Waiting...
SPT -
GL account has not been assigned for PLAAED in customization
Dear Guru's,
When i enter into the Transaction code J2IUN, system is giving following error message-
GL account has not been assigned for PLAAED in customization
Message no. 8I447
Diagnosis
GL account has not been assigned for the excise a/c in customization
Procedure
Assign GL a/c for the excise a/c in CIN customization under :
Accounting -> Assign GL accounts to excise groups and
transaction types
Please guide me to resolve this problem.
Regards,
VsIn the description of the error itself
Procedure
Assign GL a/c for the excise a/c in CIN customization under :
Accounting -> Assign GL accounts to excise groups and
transaction types
you could find the solution.
Under CIN customization Logistics-General => Accounting => Assign GL accounts to excise groups and transaction types. There check whether you have assigned the required G/L Account to your excise group.
thanks
G. Lakshmipathi
Maybe you are looking for
-
My ipod is frozen. I cannot use the touch screen at all and can't get off of the locked screen or turn it off.
-
Combining two iDVD projects into one
So... I have two iDVD projects both of which are under half an hour and they are both complete. The dvd is all set up, the menus have all been perfected and I like it. Is there anyway for me to set up one DVD and on the first menu of that DVD give th
-
Best way to load music on the Ipod?
what is the best way to do this?
-
Since people still insist on using IE 6 and I can't figure out how to use my logo with alpha transparency (despite copying the code exactly), can anyone tell me the code I would use to display my logo in png form for IE 7 and above and my logo in jpg
-
Hi All~, I have a WF which is working fine other than the DEADLINE scenario. I have defined the DEADLINE in the Latest End of a dialog step as below: Refer.date/time : Work Item Creation Time : 30 Min(Only for testing, it should be 48