User1 locking other user (STS Locking Issue SAP IP)

(STS Locking Issue SAP IP)
User1 Is locking up other functional org layouts that he does not even have access to it.User of these layouts user2 gets message every time tries to allocate data that the Info provider is locked by user1 .
even though user1 does not have access to orgs that user 2 has.
How do i need to resolve this issue?

Hello,
if user1 locks all records for a second attribute (besides org) then this will also result in a lock of all records even though the org is distictive. Try to have a look in the lock overview of rsplan and possibly repost the lock arguments.
Hope that helps!
Cheers,
Yann

Similar Messages

Locking issue SAP CRM 4.0 and SAP R/3 ECC 5.0

Hi all, I have a problem that I would like to share before creating any OSS message. I have connected our CRM 4.0 environment to our new SAP R/3 ECC 5.0 environment and am faced with a strange problem. All middleware settings seem to be correct, business partners, products, pricing and all are replicated correctly. However when I create a sales document in CRM it gets replicated to R/3 correctly but it remains locked by my RFC user, preventing me from making changes to the replicated document. The BDoc status remains 'in process' and for some reason the lock is not being removed. Does anyone have seen a similar situation and how was it solved? Thanks, Tiest.

Tiest,
This problem may not only be applicable for the combination of CRM 4.0 and ECC 5.0, but for other combinations of CRM and R/3 backend systems as well.
I've bee facing the same problems with CRM 4.0 and R/3 4.70
First check your inbound and outbound queues in both CRM and ECC (Tcode SMQ1 and SMQ2). If no queues are 'hanging', then check the status of your BDoc's.
There are some good OSS notes that help you on these problems.
Hope this helps you...
Regards, Jacques

Users are having issues w/ the community page for pa.

It seems other users are having issues with accessing the community page for pa, as noted on
URL: http://www.dslreports.com/forum/r22862991-Any-else-out-there-having-issues-w-the-community-page-4-pa
Title/Location: DSLR (dslreports.com) Forums -> US Telco Support -> Verizon -> Verizon Fiber Optics -> Any else out there having issues w/ the community page 4 pa?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

This is what I told at the online chat..
Richardo: if some people can get to both URLs and others can only get to the new one that could be that the old one is being done away with or if not that then it would have to be the setting for those computers that are not getting to the old one.
Me: Like what kind of settings?
Me: I have, as you may know, A Static Public IP (IP, Subnet Mask, Default Gateway, and DNS Servers) as assigned by Verizon.
Richardo: that would be the settings within the browser.
Me: like cache, or proxy server for example... ?
Me: connection setting
Me: You do not need to tell me where these settings are, just what type of browser settings...
Me: Please, and thanks.
Richardo: the security , cookies, temporary internet files
[EDIT] My appolgies for Cross posting.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Locking Issue in Planning DSO in SAP BW 7.3(Integrated Planning)

Hi Experts,
We have built Aggregation Level on Direct Update (planning enabled) DSO and used the same in the input ready queries.( Its complete Manual planning - new row addition feature in WAD).
We have 5 characteristic and one key figure for planning.
We are facing lock issue while planning the data i.e. when one user is planning, other user cannot plan.
The lock relevant characteristic is Column A and the same has been added to the Lock Characteristic tab(RSPLSE) of the infoprovider. The input ready query is also restricted with a variable on Column A (manual input single variable- mandatory).
While the user opens the Planning Layout and plans the data, we can see lock entry in RSPLSE(locks tab) for the Column A selection in the infoprovider, yet if another user is trying to plan for data for some other selection of Column A, a lock entry in RSPLSE is shown with the selection but it errors in thelayout with lock on the infoprovider and cannot plan the data.
Any inputs will be of great help.
Regards,
Priyanka

Post is closed.
Refer http://scn.sap.com/thread/3564212 for the solution.
Regards,
Priyanka

User Lock issue when processing IDOCS

Hi Folks,
We are pushing the data into SAP using IDOCS.During this process some IDOCS are getting failed due to User Lock on shipment header.Anyone here can share their experience in dealing with User Lock issues.
Thanks,
Kiran.

Kiran,
Only one can edit the document, it's standard fucntion. I think No note can resolve this. I can suggest you to run a back ground job very frequently ,which picks these status 51 IDOCs and reprocess. Report is :RBDMANi2
We can use Message class & error message number on selection screen, so that we can make sure that only those idocs which were failed due to Lock problem are taken by the job.
Reddy

Getting error "Document is locked by other user, please try again later"

Hi Sap gurus,
We have one invoice which is in approver's list. The approver is not able to neither approve this nor reject this invoice, the error message he gets is "Document is locked by other user, please try again lateru201D. We have checked SM12 and we could not find ant lock on this object for the user.
We have tried few function modules indicated below to unlock the work item, to change the status, to complete the work item, to forwarding this work item by another user and finally even to delete the work item.
SAP_WAPI_SET_WORKITEM_STATUS
SAP_WAPI_WORKITEM_DELETE
SAP_WAPI_UNLOCK_WORKITEM
SAP_WAPI_WORKITEM_COMPLETE
SAP_WAPI_FORWARD_WORKITEM
We have also tried deleting this invoice from the system, but still we get the same error. Can any body please help us providing the any other function modules by which we can unlock an invoice or to delete the invoice from the SRM system.

Hi,
Please review note 1277002 Wrong error message "Document is locked..." for Invoice. And also note 1178295 BBPAPPROVAL: Document gets locked by the User.
These notes should resolve this issue.
Kind Regards,
Lisa

Locking Issue in Planning DSO- SAP BW 7.3 Integarted Planning

Hi Experts,
We have built Aggregation Level on Direct Update (planning enabled) DSO and used the same in the input ready queries.( Its complete Manual planning - new row addition feature in WAD).
We have 5 characteristic and one key figure for planning.
We are facing lock issue while planning the data i.e. when one user is planning, other user cannot plan.
The lock relevant characteristic is Column A and the same has been added to the Lock Characteristic tab(RSPLSE) of the infoprovider. The input ready query is also restricted with a variable on Column A (manual input single variable- mandatory).
While the user opens the Planning Layout and plans the data, we can see lock entry in RSPLSE(locks tab) for the Column A selection in the infoprovider, yet if another user is trying to plan for data for some other selection of Column A, a lock entry in RSPLSE is shown with the selection but it errors in thelayout with lock on the infoprovider and cannot plan the data.
Any inputs will be of great help.
Regards,
Priyanka

Found the answer.
We had used the Planning Function directly in the WAD layout before saving data without filter.(basically to check some condition).
Created the Planning Sequence with Column A filter on the Aggregation level and used the same sequence before saving the data in WAD
Issue resolved.
Consider this post as closed.
Regards,
Priyanka

Error mesage: Project locked by other user?

Hello,
I just re-opened my external hard drive after a month vacation from it and tried to open my IDVD file only to get an error message:
Project locked by other user:
The project ZOOOM demo reel 10-07 is locked by the user Video (used ID 501): 2007-12-19 10:42:27-600
The project can't be opened at this time.
I went into the file's "get info" and unlocked everything to no avail. I'm puzzled. I have never seen this before. Any help would be great.
Thanks,
Jordan

Control click on the icon of your external drive and select Get Info. Check the box that says, "Ignore Ownership on this Volume." See if that solves it.
Make sure that your hard drive is formatted for Apple. Should be Mac OS extended or Mac OS extended (journaled). But if you reformat, be sure to first move your data to another drive, because reformatting will erase all data on the drive.
If that doesn't work, use the Disk Utility app on your Mac to do a permissions repair on both your startup drive and your external drive.

Project Locked by Other User! But it's me!

Today I wanted to open an old (2006) iDVD projectfile (.dvdproj) with iDVD 7.1 and I got a messagebox of the program which said:
"Project Locked by Other User
The project America del Sur is locked by the user casper (user ID ###): 2006-04-30 20:253:34 +2000.
The project can't be opened at this time
<OK>"
Does anybody knows what I can do about it to open my project. I want to burn a new DVD of this project. Please help me

Take a look at: If your archived project can’t be used by others at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6719.html

Lock the plant so that other user cannot use the same plant.

Hi Gurus!
I ahve this small report which shows the pro-rate factor . In this report I need to block the plant or lock it(a soft) lock witha message that some other user is using the plant so that other cannot use the same plant to post.Following is the report and if soemone can help me out would be very kind enough.I ahve added teh code where validation of plant is doen , so it must be somewhere here the locking should be done as per my thinking . Kindly suggest please.
*&      Form get_pro_factor
*       get pro rate factor from the given
*       combination of plant/sloc/mat#/period
form get_pro_factor .
select single zpr_factor zpr_disp_factor zpr_pipe_net zpr_pipe_gross
from zprfactor
into (zprfactor-zpr_factor, zprfactor-zpr_disp_factor,
        zprfactor-zpr_pipe_net, zprfactor-zpr_pipe_gross)
where zpr_werks = p_werks    and
        zpr_lgort = p_lgort    and
        zpr_matnr = p_matnr    and
        zpr_mjahr = p_mjahr    and
        zpr_monat = p_monat.
v_subrc = sy-subrc.
if zprfactor-zpr_factor = 0.
    if c_wp = p_lgort+0(2).
      zprfactor-zpr_factor = 1. " Don C added this routine
    endif.
endif.
if zprfactor-zpr_disp_factor is initial.
    if not zprfactor-zpr_pipe_gross is initial.
      zprfactor-zpr_disp_factor = zprfactor-zpr_pipe_net / zprfactor-zpr_pipe_gross.
    endif.
    if zprfactor-zpr_disp_factor is initial.
      zprfactor-zpr_disp_factor = 1.
    endif.
endif.
endform.                    " get_pro_factor
*&      Form valid_plant
*       validate whether plant entered in selection screen
*       exists in database or not
form valid_plant .
if not ( p_werks is initial and
             p_lgort is initial and
             p_matnr is initial and
             p_mjahr is initial and
             p_monat is initial ).
    select single werks from t001w into t001w-werks
           where werks = p_werks.
    if sy-subrc ne 0.
      message e048(zmm) with p_werks.
    endif.
endif.
endform.                    " valid_plant
*&      Form FIND_MATKL
form find_matkl .
select single matkl into v_matkl from mara where matnr = p_matnr.
endform.                    " FIND_MATKL
*&      Form UPDATE_ZPRFACTOR
form update_zprfactor using p_flag.                         "DEVK903224
call function 'ENQUEUE_E_TABLEE'
    exporting
      mode_rstable   = c_e
      tabname        = 'ZPRFACTOR'
    exceptions
      foreign_lock   = 1
      system_failure = 2
      others         = 3.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
    select single * from zprfactor where zpr_werks = p_werks
                                   and   zpr_lgort = p_lgort
                                   and   zpr_matnr = p_matnr
                                   and   zpr_monat = p_monat
                                   and   zpr_mjahr = p_mjahr.
    if sy-subrc = 0.
      zprfactor-zpr_rate_flag = p_flag.                     "DEVK903224
      update zprfactor.
    endif.
endif.
call function 'DEQUEUE_E_TABLEE'
    exporting
      mode_rstable = c_e
      tabname      = 'ZPRFACTOR'.
Thanks
Aarav

call function 'ENQUEUE_E_TABLEE'
    exporting
      mode_rstable   = c_e
      tabname        = 'ZPRFACTOR'
    exceptions
      foreign_lock   = 1
      system_failure = 2
      others         = 3.
ENQUEUE_E_TABLEE   } E_TABLEE is the name of the lock object, it starts with character "E".

How to make InDesign CS5 documents lock to other users on network when open

We have multiple users using InDesign CS5 across our network. In InDesign CS4 when one person had a page open, it was locked to any other users, but in CS5 the pages are not locked, and this causes changes not to be saved. We want them to lock, any suggestions?

We have a mac environment, with a mac server. Editorial dept. opens the pages to put stories on, and at different times another dept. needs the pages to put ads on the page. We all use InDesign CS5. When any dept has a page open, it does show the .idlk file, but still allows another user to open the document. However, once in a while, it locks it and doesn't let anyone else open it, which is what we want. This all worked in InDesign 4, it started when we upgraded to CS5. We aren't doing anything out of the ordinary.

DB locking records accessed by other user/s.

Hi Experts,
Say it poor db design or whatever.. multiple users access same row to update and my application throws error that the rows are locked by some other user.
At this point of time, I can't change the design entirely but can create some additional db procedures/tables, if those can solve my problem.
Regards

What happens if multiple user access the same excel file? How do you solve it?
By creating more excel files and giving each one its own copy? How do you merge them all back once they finished editing?
And yes your problem points to poor application design, but not nessecarily on database level.
Edited by: Sven W. on Apr 7, 2011 4:29 PM

User Automatically Locked By Other User?

There was a UserID that was locked AUTOMATICALLY by the system but logged as locked by other user.
UserID B was locked by UserID A on 26th Oct. But UserID
A was on leave on 26th Oct. There is no way UserID
A could have logged in since UserID A 'Last Successful Login' was on 17th Oct.
Any explanation on this incident? Is there any way UserID B can lock UserID A without login into UME?

Hi John,
Look for batches / background jobs scheduled by User A and check if they can set a lock code for a user B (USR02-UFLAG <> 0)
Also I'd probably check if the user was still logged in the system on Oct 26 having entered the system on Oct 17th.
Just to give it a try.
Regards,
Mike

Cannot lock the page to prevent other users from editing it. Please try again later. Error with ASP pages

Cannot lock the page to prevent other users from editing it.
Please try again later.
I get t his error when I try to edit ASP pages on my web
server, I have all admin rights, anyone know a fix for this?

App Store support. There is troubleshooting and a contact link.
Support

SOAP to IDocs Scenario...IDocs getting locked at SAP

Dear Experts
We are sending measuring point details to SAP system from 3rd Party. Scenario is working fine for small amount of load. If more number of messages triggered (say 100) IDocs at SAP are getting stuck u201CMeasPoint 10000211 currently locked -> document processing not possibleu201D.
I tried configuring Sender SOAP adapter as EOIO and specified the Queue name as Test Queue. Still IDocs are getting stuck at SAP ECC. Now one more issues messages are getting stuck in queue SMQ2. We can control the flow by using BPM in PI. I donu2019t want to use BPM for this. Can we control this from SAP or using Trigger by background program in Partner profiles?
Please suggest. Thank You.
SAP Error Details:-MeasPoint 10000211 currently locked -> document processing not possible
Message no. IR007
Diagnosis
The object you want to access is locked, either
u2022     By yourself in another session, or
u2022     By another user
u2022     or by the system, which is still processing data for this object
System Response
The system cannot access the object.
Procedure
u2022     If you are locking the object yourself in another session, exit processing in the other session and continue processing in this session.
u2022     If the object is locked by another user, you can
o     contact the other user
o     wait until the other user has finished processing the object
u2022     If the object is locked because the system is still processing its data, wait a while, and then call up the object again.

1. Create a new process code "Z" and check the enque state of the objects before passing back to standard processing modules. Id also change to process immediate as part of this change
or
2. I think assuming RBDAPP01 is still used you may be able to make use of an exit there to do the same thing .. check and wait before processing.
or
3. In message mapping place a UDF that has some kind of wait timer in it (this is random and wont always work cause you wont know when the lock is dropped) but should work.
or
4. Dont use IDOC's create an abap proxy to do the work as a sync process. Processing will need to finish in the proxy and return to the PI stack before the next message is processed in the EOIO queue - this would be the prefered option as far as im concerned, it guarenteed to work and as long as your proxy sticks to the standard rouintes it should be upgrade friendly.
or
5. Use a proxy as above but dont do any processing, just use the proxy to build the IDOC and post it - then check the status of the locks until you are ready then rinse and repeat ..... but like scratching your right ear with your left hand .. but it will work.

User1 locking other user (STS Locking Issue SAP IP)

Similar Messages

Maybe you are looking for