Userexit during automatic excise accounting document posting

Dear All,
Here the requirement is like that at the time of posting billing document their wil be two accounting documents are generated one for the Billing document transfer and other for the Modvat claimable(excise accounting document).
Here the business requires that in Modvat claimable accounting document's Assignment field i want to stamp the shipping point (from where the goods are despatched).
In our case excise invoice posting is automatic during Billing document posting(transaction VF01).
Is it possible with any excise related userexit?
please suggest.........
warm regards
ravi

Hi Ravi,
How did you solve this case? Is there any sample code? In our case, we need to generate 2 accounting documents during billing. SAP Standard function cannot support this as I know; User exit could be the only way but I have know idea how it works. That will be helpful if you can share your code or sulation with me. Thanks.
Regards,
Robert Chen

Similar Messages

Text in accounting document posted against Excise invoice

Hi,
We have a requirement that the accounting document posted against excise invoice ( J1IEX) should display a text ( Vendor name and PO No.).
We have tried entering the text at the time of capture and posting the excise invoice.But this does not reflect in the accounting document text field.
However we can maintain the same afterwards from transaction FAGLL03.
Is there any option that we can maintain the same at the time of capturing and posting the excise invoice.
Also,if I think of defaulting the same ( Vendor name and Po no) is ther any user exit OR BAPI.
Rajesh

hi
yes is their in this go to spro->img->Logistics - General->Tax on Goods Movements->India->Basic Settings->Maintain Excise Groups
in this for your excise group in *migo settings please put the tick mark in post ei in migo the at the time of migo only the excise invoice will be posted. no need of doing the ji1ex here.
Thanking you

Excise Accounting document not generated for Imported Asset GR

Dear all,
Excise accounting document is not generated for imported asset goods receipt(MIGO)
but "C" Register part 2 no. is generated,usual accounting document is generated for GR,
Asset is Dr to GR/IR
Process is
1. Create asset purchase order with acct. assignment "A",
2. Customs miro based on p.o.
3. Do GR with excise
4. Post invoice for orginal vendor.
What will be cause of this problem ?
How to solve this issue ?

The above issue may be due to Accout assignmnet -A . Check your accout assignment in spro -mm-purchasing -accout assignment - Asset A - GR Non valuated has Ticked on . If it is ticked on - No Fi entry will happen at the Time of GR .
The reason being , if an FI entry happen for the first time , asset is capitalised . To avoid this GR is made in ur config as this .
rewdzzzz is full if correct
Edited by: manu m on Apr 24, 2010 11:11 AM

Excise Accounting document not generated

Hi
i am creating intracompany STO. The billing type JEX is proforma invoice not relevant for accounting. But Excise accounting docu,ment should generate. In my pricing procedure JEX2 is marked as statistical. But excise accounting is getting generated for some materials and not for others. But if we cancel proforma invoice through J1IH and then J1II then it get generated.Please guide.Hot can I get the accounting document generate automatically without J1II.

In my pricing procedure JEX2 is marked as statistical
if the configs are missing then how it can generate for
one materialan not for other.
What your say is correct. If any issue is coming because of IMG settings, it should be for all. Since in your case, only in certain cases, issue is there, you have to check in debug mode as to why it is functioning like that.
By the by, just check in OBQ3, for CIN pricing procedure, whether it is checked for statistical. If so, untick from there.
G. Lakshmipathi

BAPI for Accounting Document Posting

What is the name of BAPI for Accounting Document Posting and how can I run it?

Hi ,
Can you send me the code how to use the BAPI_ACC_DOCUMENT_POST.
Regards,
L Srikanthan.

How to use Bapi BAPI_ACC_DOCUMENT_POST for g/l account document posting

Hi all,
I am using BAPI_ACC_DOCUMENT_POST bapi for g/l account documents posting.as I am first time using BAPI in my program.can anyone give details about how to use this BAPI for document postings.what importing parameters need to be passed , which exporting parameters need to be passed and which tables need to be used.
Thanks in advance.
Regards,
Harshada

Moderator message - Please search before asking - post locked
Rob

Accounting Document Post with Ledger Group

Hi,
I am trying you post accounting document using 'BAPI_ACC_DOCUMENT_POST', But my requirement is to post the acc documents with 'Ledger Group', I couldn't find any parameter in the above mentioned BAPI. If anyone come accross same requirement please share your knowledge and suggest me how to proceed with this.
Before posting this thread I searched for the threads with same category, but i couldn't find sufficient information.
Regards,
Narayan

Hi Navitha,
I am doing migration as It's a one time activity, If I implement BADI it will be triggered whenever accounting document posting happens, Is there any other way to pass Ledger group like other BAPI / FM etc ?
Regards,
Narayan
Edited by: narayanasamy rajagopal on Sep 30, 2009 11:08 AM

BSEG Update during accounting document post

Hello ALL,
Need an idea to update a custom field in BSEG. The field should get updated once the A/C document gets generated but not yet saved in database. The BTEs are not helpful as its NOT allowing to change the T_BSEG entries. Substitution also not helpful as its gets triggered quite prior to the actual generation of accounting document in the system. The important part is the updation shouldn't be transaction specific. Means whenever an accounting document gets generated that exit/badi/bte should trigger to update that custom entry.
Many Thanks for the suggestion.
Somnath

Hello Ankur Agrawal,
Thanks a lot for your help.
I got the item text from the mentioned BADI. I will get back to this post if it works.
Thank again for your quick reply.
Kind Regards,
Bryan

Accounting Document Posting

Hello All,
During MIGO GR against Production Order due to a dump in a customized BADI, the Material Document gets generated but Accounting Document Doesn't generated. Now we have solved the problem and dump is not coming. Now our requirement is to do account posting for the document( some 18 documents ) for which the material document is generated due to dump but Accounting document doesn't created. Can somebody tell me about the way to achieve this.
Thanks and Regards
Animesh Sundriyal

Hi dear Animesh,
Yes there is a program that can allow this automatically
Please use SE38
Then program RGURECGLFLEX
Then, you can put the documents number in selection and can try first with test run, if it seems correct, run it in real mode
Hope this help
Regards
Tarek
Edited by: Tarek AYACHI on Sep 23, 2011 1:13 PM

Automatic clearing for document posted via FBB1 with foreign currency

Hi SAP Gurus,
Can anyone help to explain on why does the document posted in FBB1 with document currency USD was auto cleared even without satisfying the rule in OB74. But when the document currency is SGD it can be automatically cleared.
Scenarion is as below
OB74 set up:
   Accty type: S
From acct: 12000
To account: 12000
Criterion 1: Business area
Criterion 2: Assignment
G/L account : 12000
Account currency : SGD
Post JV document via FBB1:
     Dr 12000
     Cr 20000
     Document curreny : USD ; amount: 0
     Local currency: SGD ; amount: 200
     Assignment: Test A
     Business area: 'blank'
*When I run F.13 above document was cleared and the clearing doc contains below
       Dr 20000
       Cr 12000
But when I post in FBB1 with same entries as above, only changing the document currency to SGD it will not be cleared via F.13.
Appreciate your explanation on why does above scenario happened.
Thank you in advance.

HI,
while posting the entry through FBB1 then system will not consider the exchange rates as per ob08 and etc.,
you can define the local and foreign currency values as per your wish while posting the FBB1.
I hope above will clear you issue. Thank you.
Reg
Madhu M

Accounting document posting enhancement

Dear All,
I am having requirement of exchange gain/loss should go only loss g/l account. since it is client level setting i cannot change this & it is required only for 1 of the group companies. other cos follow std process it gain/loss based on the transaction. Can anyone suggest is there any function module /exit which i can use & change the G/L account NO while posting accounting document automatically by system through hard coding of G/L at program level.
Early reply is helpfull .
Thanks
Pramod

Hi Pramod,
note 127178 (and 126192) offers a solution with exit_sapliedi_001 to post to several G/Ls instead of only one.
regards Bernhard

Excise- Accounting Document Problem

Dear All,
I got a situation where when i am creating a PO for 2 quantity & creating 'CVD' invoice for .240 quantity & same i am utilizing at the time of GRN but when i post the MIGO system shows the entry related to excise but not generate 'Accounting document.
In MIGO i am using option 'Capture & Post' excise invoice
But when i go for all remaining quantity or full GRN as for PO for e.g for 2 quantity system generates accounting document.
For the same i checked the settings in configuration for plant i.e. Multiple GRN multiple credit is maintained & in J1ID i maintained the related plant for 'Multiple GRN multiple credit'.
Other information with relevance to PO- in my PO material is not there we are creating it with assignment category A having asset & material group.
Please let me know if any other information required.
Looking forward for reply.
Regards
Sandeep

Hi,
Thanks for response.
I further analysed with reference to your answer & found that if i give quantity 0.5 or more than that then it is generating accounting document but if i give less than that it is not generating accounting document.
Is there is any logic written for rounding off?
Regards
Sandeep

How to add line items to Accounting Document posted through MIRO ?

I need to perform Additional posting when Posting through MIRO transaction..i tried with INVOICE_UPDATE BADI but this was not useful...Please let me know if there is any way to add additional posting to Accounting Document created through MIRO.
If any user exit , BADI ot BTE present?

Hi,
Check the BTE's:
00001020     POST DOCUMENT:       Prior to final checks             SAMPLE_INTERFACE_00001020
00001025     POST DOCUMENT:       Final checks completed       SAMPLE_INTERFACE_00001025
00001030     POST DOCUMENT:       Posting of standard data     SAMPLE_INTERFACE_00001030
00001050     POST DOCUMENT:       Accounting interface           SAMPLE_INTERFACE_00001050
Thanks & Regards,
Harish

BADI/EXIT for MIGO for accounting document posting

Hi
I am using MIGO where SAP post Mat Document and Accountying document.
This Uses FM 'MB_POST_GOODS_MOVEMENT < Include LMIGOKG1>, once this FM executed both MKPF and BKPF data gets filled . I can see tha data for MKPF in debug but I am not able to see data for Accounting Document.Even I cant see the Acc. document no assigned by SAP
I need to change some fieds for Acc. Document <BSEG-VBUND>
Can any one help me to find in which structure or table I can get data for Accounting document

am using the method POST_DOCUMENT,
am writing the code like..
sample code..
DATA: wa_mseg type mseg,
wa_mch1 type mch1,
wa_ausp type ausp.
loop at it_mseg into wa_mseg.
*select single * from mch1 into wa_mch1 where matnr = wa_mseg-matnr*
and charg = wa_mseg-charg.
if sy-subrc is initial.
*select * from ausp into wa_ausp where objek = wa_mch1-cuonj_bm*
and klart = '023'.
if sy-subrc is initial.
if wa_ausp-atwrt EQ 'ACCEPTED'.
continue.
else.
if wa_ausp-atwrt EQ 'REJECTED'.
call function 'popup_to_display_text'.
endif.
endif.
endif.
endif.
endloop.
when i debug ,i find no data in the mch1 table ..
any help..
thanx

Copy mvt 561W with no accounting document posting

Hi all,
I want to copy movement type 561w (special stock - consignment) to a new one, but that mvt should not post any accounting document as this mvt will be used for processing consignment stock which does not need to be maintained price & value but quantity.
Please help!
Best,

if you sold the material already, then the material is owned by your customer, that makes it clear why it should not have a value in your books.
561W does not work because special stock W is stock that is owned by you, hence it is valuated.
here are some alternatives:
you can create a second material master (type UNBW) and receive the customer owned material to that new material.
you can create a vendor master as equivalent to your customer and receive the material as vendor consignment stock. this will as well create no accounting documents, except you use parts of the quantity for own purposes .
you create a return order and receive the material into return stock Return stock is non-valuated. When the customer finally has space to get the material, you just cancel the return delviery.

Userexit during automatic excise accounting document posting

Similar Messages

Maybe you are looking for