Userexit EXIT_SAPLL03A_010(veryurgent)

hai ,
Can you please suggest me whether the EXIT can be applied for this requirement or not .
User exit to be applied either after confirmation of transfer order, or after post goods receipt is carried out (whichever is most appropriate ABAPer to advise). If the transfer order is confirmed with quantity, (LTAP-QDATU is not blank and LTAP-NISTA is greater than zero), check the transfer order for the conditions held in a new table (eg /RB17/YV_93723_COND), as per below.
Create a transaction for this table (eg /RB17/YV_93723_COND) so that the business can add / change conditional data as required. The Destination Storage Bin field must be able to accept * wildcard so that an entry of Q* will include any Destination Storage Bin beginning with Q. Initially, only the following table entry will be required.
WH Number
(LTAK-LGNUM)     WH Movement Type
(LTAK-BWLVS)     Source Storage Type
(LTAP-VLTYP)      Destination Storage Type
(LTAP-NLTYP)     Destination Storage Bin
(LTAP-NLPLA)
A3     651     904     006     Q*
If the conditions contained in the above table apply to the transfer order, then extract the required data and populate a second new table (eg /RB17/YV_93723_DATA), as per below.
This example data refers to transfer order 324974 in the Q51 test system.
In Table LTAK:
Warehouse (LGNUM) = A3
WH Movement Type (BWLVS) = 651
In Table LTAP:
Source Storage Type (VLTYP) = 904
Destination Storage Type (NLTYP) = 006
Destination Storage Bin (NLPLA) = QR004
This Transfer Order meets the conditions held in Table /RB17/YV_93723_COND above, therefore the following data should be recorded in a second table /RB17/YV_93723_DATA.
Transfer Order (LTAP-TANUM)     Material Number
(LTAP-MATNR)     Destination Storage Bin
(LTAP-NLPLA)     Destination Storage Unit
(LTAP-NLENR)     Date of Confirmation
(LTAP-QDATU)
324974     0601912237     QR004     1000942286     15.03.2006
Earlier responce is verymuch helpful to me
regards,
Message was edited by:
        shishupalreddy ramreddy

hi ramesh,
my question is whether shall i apply this exit for my requirement .
because when i tried to debug the respective tcode this exit is not at all triggered .
very urgent ....

Similar Messages

Userexit For TCODE J1IJ depot excise invoice

hi
I want to know is there any userexit for depot excise invoice. That we can use to check weather excise entry date that is (J_1IRG23D-CPUDT) is equal to likp-WADAT_IST . Any info will be really helpful.
Thank you

Hi,
Use this program SAPMJ1IJ in this program there are 4 includes.
First try with MJ1IJF01
So check with your abaper which exit is working in this include.you can do it by setting break-point.
Also check other includes MJ1IJTOP MJ1IJO01 MJ1IJI01
Thank you,

BADI/UserExit for MIGO in Stock Transfer

Hi Gurus,
I have a requirement.
When posting a GR in MIGO, if the material has been flagged to go through inspection, MIGO post the batch to quality inspection.
Now, when a batch has already gone through inspection (for example in another plant) and its released (passed) and its been transferred to another plant, if we are receiving this batch doing a post GR in MIGO, it automatically post it to quality inspection again.
Is there a BADI, UserExit or way to skip this inspection and post the batch to unrestricted stock since its already gone through inspection in the previous plant and has a Decision Code A0 (accepted etc).
We don't want to change the material master for this because we still want the material/batch to go through quality inspection if its hasn't already been.
Thanks..
Baz
Edited by: Basil Balogun on Sep 23, 2010 1:49 AM

Hi,
Try the possibilities of MB_MIGO_BADI. I think in method LINE_MODIFY, POST_DOCUMENT and perhaps PAI_DETAIL.
I hope this helps you
Regards,
Eduardo

Sales Order Costing. Error values, need BAPI or Userexit or Enhancements

Hi Experts,
I have a situation to solve the Errors in Sales Order Costing.
My Error is, its not splitting values equally,,, (BOM Item Price Values)
for example...
let i have a parent Item A.
and Child Items as A1, A2, A3.
Now the Qty of A is 100. for each item the price value is 50. so the total value is 5000/-
Now If i need one A, then I need 8 A1's, 4 A2's, 3 A3's.and let think A1 value and A2 value and A3 value (single Unit ) are equal. and let the value be 100.
but in BOM i can see all the values of A1, A2, A3 as same. (500, 500, 500) but it should be (800, 400, 300)
The single Unit Price is not multiplying with Quantity, but its equally splitting.
Please tell me Can I find and BAPI or Userexit or any enhancements or any Configurations to do.
Thanks & Regards
Dileep .C

no replies and my thread was dead.

USEREXIT FOR transaction J1IJ

Hi
My user wants that date in J1IJ that is excise from depot sale should same as PGI date. If it is not same it should throw some error. Is there any userexit available for the same.
Any information will be of great help.
Regards
Jalaj

Hi Jalaj,
Use any one of these user exits
MJ1IJI01.
MJ1IJF01.
Regards
Ram

Display error message in userexit

I have a checking which implement in userexit. When the criteria meet, it will block po saving and display error message. I would like to know how to display the error message. Thanks!

Use like this for first approach else if second one were serve you purpose than you may go with second one also.
DATA: mid TYPE sy-msgid VALUE 'SABAPDOCU',
mtype TYPE sy-msgty VALUE 'I',
num TYPE sy-msgno VALUE '014'.
MESSAGE ID mid TYPE mtype NUMBER num.

Need userexit while saving the billing document (VF01)

HI Folks,
I need a userexit while saving the VF01 transaction code. My requirement is i need to check if there is any intercompany invoice was created before the delivery related invoice
By default SAP creates delivery related invoice . I have checked lot of userexits with package VF but none is working and also gone through the standard userexits RV60AFZ*, still didn't find any good one for my requirement..
All your help is highly appreciated..
waiting for your replies.
Regards,
raj

Hi,
I have done some analysis before posting the question and one mistake i done is i have checked theUSEREXIT RV60AFZC and i checked XVBRK AND XVBRP instead of VBRK and VBRP...also whie saving this is not called, it is called when we press enter and also when we press SAVE button in the initial screen.
I missed the small thing...
Thanks for the link..
Regards,
Nagaraj

Userexit while saving the billing document

Hi all,
Is there any userexit while saving the billing document..I want to define minimum invoice value in system.
Regards,
Puneet Makkar

Hi,
In preceding project, i had the same requirement.
Price condition : copy from std price for minimum value.
Use condition category (for specific determination price for invoice).
In price procedure : apply requirement to active only for invoice (std = 22).
Re determination of price during creation of invoice :
use RV61AFZA with the value of condition category to adapt pricing type (ex : X).
modify copy rule (Tcode VTFL) for item : use new value for pricing type (ex : X).
Regards,
Lionel

Pls help me to identify in the SD userexit what triggers "del of items"

Here's the background of the problem. (it is difficult to explain the problem and I will try my best).
When processing certain IDOCs, something in the SD userexit is causing the change logs of vbap records to be set with a message for every item "Item has been deleted". I could not reproduce the problem in either the development or QA environment. It is happening in production and it happens when the IDOC is processed every night by a batch job running a standard SAP program RBDAPP01.
It then becomes too late for me to debug the issue in production...and I can't real mess around with idoc procesing in production either..
Since it has become impossible to reproduce the problem in QA or Dev , I am trying to figure out how to prevent it from happening...
(I know fixing the existing records is another problem) I'm trying to figure out what code in the user exit thinks that it should log a message "Item has been deleted" for every item of vbap. The item itself is not deleted or marked for deletion..it;s just that this is appearing in the change history...
Can anyone suggest what may be causing this issue.,..
Thanks....
Sam
Edited by: SammyBoy on Apr 8, 2011 10:39 PM
Edited by: Sam on Apr 8, 2011 10:40 PM

If u want to add Items data, u have to handle the Table control by writing the complete code.
U have to write code for 2 items, when u press enter u will get new row to enter new record one by one.
Narendra

USEREXIT to adjust the rebate credit memo request to your own require

We are using function module SD_BONUS_CREDIT_NOTE_CREATE in one of our rebate program.
This Functional provides the option to use USEREXIT to adjust the rebate credit memo request to your own requirements.
With Present form of functionl module it take standard doc type to create the rebate credit memo request.
So Question here which are userexit we have in this FM which can be used to create the rebate credit memo request to our requirement.
Has any body used this FM before to this length..
appreacite your help
Thanks
rao

Hi Serma,
I haven't use this FM. I only can advise you how to find user exits in this (any) FM.
Open your FM via SE37 and then try to find in this Function Group any CALL CUSTOMER-FUNCTION 'xxx' ..., where xxx is a 3-digit number which refers to the relevant FM EXIT_<FG>_xxx.
<FG> is the name of the Function group to which the FM belongs to.
When you find such an EXIT-Function, take a look at the parameters. When you find parameters which satisfy your needs, go ahead and build your EXIT enhancement in the predefined ZX-Include (you can find this inside the FM EXIT_<FG>_xxx).
I hope this helps,
Heinz

How to get xveda values in sales Order userexit MV45AFZZ

Hi guys,
Tables XVEDA and YVEDA has no entries in sales order userexit. Do you know how to get contract end dates of line items in sales order user exit

Used function module SD_VEDA_SELECT to solve the issue

How to Carry out New Pricing in Sales Order userexit

Hello,
In userexit save_document_prepare of program MV45AFZZ, I'm adding an entry in XKOMV for a header pricing condition ZD01. After saving, if I go back into the order and go directly into the line item conditions, the ZD01 does not exists at the item level. If I navigate the the header conditions and then go back to the items, ZD01 appears as it should. I believe what is happening is that the header condition is not being distributed to the line items unless New Pricing is carried out. If I manually enter the ZD01 condiiton instead of relying on the userexit code, everything works fine. The header condition is properly distributed to the line items. Therefore, I believe the configuration is correct. My question is, "How can I programatically trigger New Pricing from a sales order userexit". Is this possible in SAVE_DOCUMENT_PREPARE or do I need to do it somewhere else.".
Thank you,

this problem has been resolved. The problem was that I was appending the header condition to XKOMV instead of inserting the header condition as the first line in the table. SAP will carry out the new pricing if the header condition is on the first line.

Userexit/BAdi in BP replication process in R/3?

Hi All,
Is there any userexit/Badi is available in R/3 for BP replication process for CRM to R/3? It would be much appreciated if you provide the same.
Thanks,
Narsaiah

Hi All,
Thanks for your response, after my investigation I found that there is no issue in CRM o/b BDocs, issue is only when populating the BP in R/3. To populate this it's using BDC call transaction there it's not populating the Name1 and Name2 fields of BP(Customer) in XD01. And its using BAPI PI_BP_PROXY_BAPI_CUSTOMER in R/3 side to process i/b data. I'm not sure why its not populating in call transaction. It's using DEBITOR_BDCDATA to get BDC data with this FM I'm bit confused, as its not picking any screen fields for Name1, Name2 and Address. However its updating address not Name1 and Name2. Could you please someone advise on this? It would be greatly appreciated.
Thanks in advance.
Narsaiah

Need Badi or UserExit during Delivery creation

Hi,
I have a requirement to create PGI automatically after delivery is created.
So i am looking for Userexit or BADI which is called immediately after delivery is created so that I can used delivery number and call logic to create PGI.
I have searched the sdn for same requirement but the badi LE_SHP_DELIVERY_PROC or BADI DELIVERY_PUBLISH and user exit MV50AFZ1 wont suffice .
Please suggest.
Thanks & Regards,
Swapnil.

Hi,
to check which BADI are presents during the execution of your trx, just put a break point in the method "get_instance" of the class "cl_exithandler".
Watch the "sxs_inter" variable (that contains the name of the BADI interface).
Run the trx and just watch what u can implement.
Hope it helps
Bye
Andrea
Pls reward if it helps

Userexit -- TVAK-LISOF

Hi
In sales document there is field TVAK-LISOF - immediate delivery. With the document type (example ZOR having TVAK-LISOF blank), whenever the sales order is created for specific plants, the TVAK-LISOF field should be set to A.
Creation of new document type is out of scope.
How this can be achieved (through userexit??).
Would appreciate your inputs.
Thanks
Suddu
Before saving the sales order document, the TVAK-LISOF has to be set to A, so the delivery document will be created automatically when the sales order is saved.
Edited by: sud val on Jun 5, 2009 3:31 PM

Hi,
U can do this either by USER EXIT or BADI.
U need to check out for the available BADI or User Exit where actually u can update the table by capturing the reqd fields.
Regards,
KC

Userexit EXIT_SAPLL03A_010(veryurgent)

Similar Messages

Maybe you are looking for