Userexit for Qty Changing after TO Confirmation and before PGI

Hi Experts,
I am seeking help for a scenario as below.
1. The delivery has a situation where after the Transfer order is confirmed and before the PGI is done, I have to put a check of Qty for non-stock items (they are not relevant for Transfer order) based on the confirmed Qty of the normal items.
I want to find the proper user-exit / form for the same.
Currently I am thinking about using Program MV50AFZ1 ( FORM userexit_save_document) assuming that this will be called when we click the PGI button.
Please suggest if this is the correct place or is there a better user-exit for usage.

Try with USEREXIT_SAVE_DOC_BEFORE_PREP in program MV50AFZ1 which is called before the deliveries are saved
G. Lakshmipathi

Similar Messages

  • TS3048 I'm having a difficult time getting my wireless keyboard & trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, won't connect to iMac. Pleas

    I'm having a difficult time getting my wireless keyboard & trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, both won't connect to iMac. Please help...

    Hello:
    Try resetting the SMC:
    http://support.apple.com/kb/HT3964
    Barry

  • Order Component quantity gets changed after operation confirmation

    Order Component quantity gets changed after operation confirmation.
    We are using CO27 to issue the Material to the Order.
    When we do the confirmation of  operation. Component quantity attached to operation get changed.
    Any solution for this.

    Dear
    Please Follow the Steps
    1. Go into Co02 there u do production order with qty select the Component overview u find the Materials there please check hhow much is the qty of that particular material
    EX: Production order qty for Header Material is 10 ea
    then ur Compannets Qty is 10 or 20
    depends on the Componet Qty the Operation takes place that is because u have maintatined a base qty in Routing and BOM
    With Regards
    Pushpalas

  • System shud not allow for batch change after  bacth determiantion.

    Dear ALL,
       I have one Isuue at my client , there requiremtn is -
    "Performing the process it was detected that the raw material and packaging material  batches could be changed after the process order created, which allows to picking a batch instead FEFO. "
    Is there any way that system not allow for any change related to batch and its qunitity.
    Awaiting for fevorable respoce.
    Regards,
    Prerna Verma

    Hi Prerena,
    Activating Check Batch Tab in COR4 will performs an additional check in order itself.This check works after completing Batch Determination.For example during Batch Determination system has selected (as per your sort rule) Batch X for issue.But later User tries to change this Batch No. to Batch Y(by overwriting the batch no. in Batch field).But if you have activated this Check Batch function then system will perform the check immediately whether this new Batch complies the Batch Determination rule or not.And if found wrong then gives you an error or warning msg(depends oin your msg control).
    my second point is regarding Transaction code COB1 to deactivate the Allow change function.See if you activate the this tab then you finds that qty fields editable during Batch determination.So you can change the qty. manually during batch detemination.
    So in your case 2 level checks required.
    1) During Batch Determination (COB1) - Deactivate Allow change
    2) After Batch Determination(COR4) - Activate Check Batch
    Regards,
    Dhaval
    Edited by: Dhaval on Sep 27, 2010 8:43 PM

  • I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please?

    I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
    You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod?

  • If my ipad has a dint in it but it still worked for 7 months after that moment and know it just stoped working does the year warranty still apply

    If my ipad has a dint in it but it still worked for 7 months after that moment and know it just stoped working does the year warranty still apply.

    No. iPads that have any type of denting or physical damage (old or new) are not covered under the warranty. Apple would have no way of determining when the damage was done or if that damage caused your present issue.
    I believe that once they see physical damage, their reasoning for voiding the warranty would be that visible, physical damage, irregardless of when it ocurred.

  • How do I get rid of the blank space after one paragraph and before the next paragraph startsin Pages '09?  I understand that I should not have a page break mid paragraph but that is what I want.

    How do I get rid of the blank space after one paragraph and before the next paragraph startsin Pages '09?  I understand that I should not have a page break mid paragraph but that is what I want.

    Hi stephanie,
    These are unrelated questions/statements.
    Space before and space after a paragraph are controled in the Text Inspector, as you've found out.
    Pages will create a page break whenever there is no room for another line on the page. That break can come anywhere in a paragraph.
    You may be thinking of Widow and Orphan prevention, and the other Pagination controls, found under the More button in the Text Inspector. (If that's what you found, then thanks for the refresher! I hadn't been to that pane for awhile, and had forgotten the variety of pagination controls available.
    Regards,
    Barry

  • Difference between AFTER PARAMETER FORM and BEFORE REPORT in Reports 6i

    Hi Aii,
    What is the difference between AFTER PARAMETER FORM and BEFORE REPORT in Reports 6i.
    Thanks in Advance,
    Balu

    Hi Balu.,
    As per my findings the After Parameter is fired after the Parameters are given to the report and Before Report fires when the queries are parsed and data is fetched.
    Regards.,
    Vijay G

  • Difference between After parameter Trigger and befor report Trigger

    hi,
    Can anyone tell me Functional difference between After parameter Trigger and Before Report Trigger. with some practical example or scenario.
    I did try few things but I couldn't make out any difference.
    thanks
    ram

    Probably none at this point.
    We pass parameters from a form (and do not use the report param selection screen), but always run code in the afterpform.
    put your parameter form code processing in the afterpform. I rarely ever use before report.
    The order is as expected:
    before pform
    param form
    after pform
    before report
    report
    --between pages during report run
    after report

  • PRODUCTION ORDER--Qty changed after one operation----URGENT

    Dear Experts
            Hope u all R doing well
    In the production order,after one operation completed(whether it is first ,second  or last ) the system is allowing to change the qty.
    but we want the system to disallow  the qty change.
    could anybody can help, is there any configuration settings inside?
    waiting for your valuable response
    Thanks in advance

    Hi,
    Sorry for the delay.
    Pl. follow the steps below.
    1. Create a status profile Eg: s1 usng t.code bs02.
    2. Enter status no. as 1, status as CRTD, a description, tick Initial status & lower status no. as 1 & higher status no. as 2.
    3.In the second line enter status no. as 2, status as REL, a description,  & lower status no. as 1 & higher status no. as 3.
    4.Choose Object type tab.
    5. Choose PP/PM: Order header.(tick)
    6.Then come back to main screen & double click REL.
    7.Click the create icon in the top.
    8.Choose Release & then choose radio button under <b>SET.</b>
    9.Then come back to main screen & again double click REL & then choose create & select change & check the radio button under <b>FORBID</b> & then save.
    10. In t.code OPJH(order type), choose your order type & then assign the status profile( Eg:S1)
    11.Now convert the planned order into production order.Release the order & save.
    Further changes cannot be made in the production order.
    Pl. give feedback after testing.
    Regards,
    S.D.Senthilkumar

  • Fix for crash in After Effects CS5 and Premiere Pro CS5 when Joesoft Hear audio enhancer installed

    After Effects CS5 and Premiere Pro CS5 both can crash due to a conflict with the Joesoft Hear audio enhancer.
    We've just gotten confirmation from Joesoft that they've released a beta version of Hear that doesn't conflict with After Effects CS5 and Premiere Pro CS5. We're recommending that our customers who also use Hear install the 1.0.5b2 (build 490) beta version of Hear.
    Let us know on this forum thread whether this solution works for you. We on the After Effects and Premiere Pro teams will monitor this thread for feedback, and we'll make sure that the folks at Joesoft get the information that they need, too.
    When reporting back, be sure to let us know whether you've installed the Premiere Pro CS5 (5.0.2) update and After Effects CS5 (10.0.1) update.

    After 2 days trying to get AE and Premiere past the mediacore initialization message, I finally stumbled on this little message.  Updating Hear definitely solves the problem!

  • Planned order qty. shodnt  change after copying quotation and creating SO

    Hi Guys,
    In my scenario i am creating a quotation of qty. 100. Sytem generates planned order of 100 qty.After i copy the quotation and creates a sale order changing qty. to 50, the system is changing the planned order qty. to 50 whereas the requirement is planned order qty. must not change i.e. it must be 100.
    Is there any setting for this.
    Regards
    Laxmikanth

    answered

  • Automatic font size/type change after sending - why and how do I fix it?

    This only seems to happen when I copy text from a web page and paste it into a compsosing email within Mail but it does not display on screen as anything different until the email is sent.
    Here is an excerted screenshot from an email that was sent. When I composed it there appeared to be normality but after sending it changed.
    A little more background on when this seems to happen. My french is not good. I use dictionary.com to translate text then copy and paste it to the email. I am not sure if this is the only circumstance of when this debacle happens but it seems to be constant when I follow the previous steps. Note: If I am not troubleshooting when it happens and I highlight all text (even though it looks normal) before sending then manually change the font size or font type and revert back to the size type then it does not always happen but still will periodically.
    Any ideas on how to fix this problem? Is it a known bug or virus?

    This is not a virus.
    It's important to keep in mind that Mail sends HTML e-mail, when the text needs to be "styled" in any way, rather than just plain text, and not all mail clients will display that in the same way (or even at all). Also, Mail doesn't really have much in the way of editing capabilities for HTML e-mail.
    Fortunately, from what you describe, there's a solution... if text you are copying from somewhere and pasting into Mail has strange formatting, try command-option-shift-v, or Edit -> Paste and Match Style, to paste the text. This discards all the style information attached to the copied text, and pastes just the text itself, making the text match the style of whatever you're pasting it into.

  • Delivery Qty change at the creation and change of Delivery

    Hi,
    How to change the Delivery Qty at creation of Delivery. The quantity is rounded depending on some roundng factor.  Can u please help on this? We are trying to use user exit MV50AFZ1 but it's updating the LIPS-LFIMG field only in change mode VL02N and not in VL01N. Actually its updating in VL01N too but the value is getting overwritten soon after that by standard value.
    Thanks in advance...
    Edited by: Swapnil Sharma on Apr 9, 2010 9:21 AM

    Hi,
    I had the same problem and from this post i updated only 2 fields:
    XLIPS-LFIMG, XLIPS-LFIMG_FLO
    And it updates quantity

  • No IDOC's for the change record in child and CUA systems.

    Hi,
    The user profile was modified and  assigned roles and profiles on so and so date by someone as it is showing in the change record of the user in the child system with a batch user id.
    I have search the IDOC's with respective of the child system, date & time but I didnu2019t find any IDOC with respective of the above criteria.
    So kindly help me out is there a way I can find the information as who changed the user profile via CUA system....
    Thanks for your help...
    Thanks & Regards
    Sukumar. V

    Release:
    700   Master & Child
    SP level
    Can i know for which area you need it...
    BASIS
    0015   Master
    0013   Child
    Netweaver
    0016   Master
    0015   Child..
    Please let me know if you need any further info....
    SV

Maybe you are looking for