UserExit in extraction for 2LIS_02_SCL?

Hi,
I would like to change the way one of the standard fields in extract structure for 2LIS_02_SCL is filled. Is there a UserExit, or something, that I could use?
The field "BW:CValOC(BWGEOO)" contains the cost value for an item in PO currency. The issue is that it seems like the value is calculated with the exchange rate from the PO, when I'd like to use the exchange rate of the invoice instead.
Best Regards
/Daniel

Hi Daniel,
I am trying to do a similar thing in the update rules using the function module "CONVERT_TO_FOREIGN_CURRENCY" but have run into a snag....
When you convert the local currency amount back to the PO currency I get rounding issues. For example
My invoice amount in PO currency is 982.00CAD. The exchange rate used to convert from CAD local currency to USD Purchase order currency is 1.3787. This gives a result of 712.265177 etc.... This amount is rounded to 2 decimal points to 712.27USD
When you convert the USD local currency amount of 712.27USD  back to the CAD purchase order currency using the same exchange rate, the amount calculated is 982.006645 etc...This amount is rounded to 2 decimal places to 982.01CAD
Can't think of a way around this. Have you run across this problem yet and have you solved it?

Similar Messages

  • Extractor checking for 2LIS_02_SCL = 0 records selected

    When I try to check extraction (in RSA3) for 2LIS_02_SCL I get "0 data record selected" even if there is plenty of data (PO's) created. Could it be that the DataSource hasn't been actived?

    Hi Daniel,
    do you have the the authority now?
    Another reason is, that you might have not run a setup for application 02, so the setup tables are empty and you cannot extract any data during a full request.
    Let me know!
    regards
    Siggi

  • Delta Loads for 2lis_02_scl and 2lis_02_itm

    Hi Experts,
    I am facing an issue, After initializing the setup tables and doing the init load for 2lis_02_scl and 2lis_02_itm whenever I do the delta loading for these two, all the dataload finish with green status and extracting 0 from 0 records.
    I can see the queues for both these datasources in RSA7 in R/3, yet no record is extracted.
    Any help will be appreciated.
    Regards.

    Hi,
    have a look into transaction smq1. there you should be able to see your extraction queues with the entry MCEX02 (or likewise)
    Please schedule the program RMBWV302 and when this one is finished, start the deltapackage.
    hth
    cheers
    sven

  • How to find Extract for the bank key/ bank account changed in vendor maste

    Hello Gurus,
    I need help in finding the extract for the bank details of vendors changed for a period of time. I tried using FK04 under multiple selection and ran the report for the selected vendors. It only shows  the "bank details created" or "bank details deleted" under Old Values and New Values but doe not actually shows the values for the field changed.
    Is there a way where i can get a report which shows a log of change in bank details with old and new values,
    Thank you,
    Prakash

    HI,
    Try using report RSSCD100 and give the selection condition
    Object id --> BANK
    and then you can limit the results by specifying the time and date range..

  • How to create a System Extract for Communication

    Hi,
    I've built System Extracts before but not for Communication. Does anybody know what the steps are to create a System Extract for Communication? I already built a particular Communication Type and the delivery method is email. I was told that Oracle only creates the trigger for this Communication Type but not the email. If I built the System Extract Communication and run it, is that supposed to send an email? and if so, what kind of information will be sent in the email?
    Thanks,
    Ronaldo

    Hi James,
    If you like to use SAP web dispatcher as a solution for load balancing portal application, you no need to create system object under systems..
    You have to install web dispatcher as separate instance where you need to configure portal apps into it..
    Configure web dispatcher like to hit the admin port, use http://<webdisp-server>:<adminport>/sap/admin
    For normal portal access, use http://<friendly URL>/irj/portal
    The good news is that the webdispatcher knows that the portal supports SSL
    Another advantage of this config, is the webdisp, will just replace the apache redirect server. Users will access mycompany.com, without any port number, since we are redirecting 80 to the backend j2ee. Also, https should work like in the normal world.
    Profile will be like below...
    SAPSYSTEMNAME = WEB
    SAPSYSTEM = 00
    INSTANCE_NAME = W00
    DIR_CT_RUN = $(DIR_EXE_ROOT)/run
    DIR_EXECUTABLE = $(DIR_CT_RUN)
    Accesssability of Message Server
    Message Server Parameters ##########
    NOTE: The "ms/http_port" must match the profile on the Central Instance
    rdisp/mshost = <FQDN of portal CI Host>
    ms/http_port = <Ms port of portal>
    SAP Web Dispatcher Ports
    #icm/server_port_0 = PROT=HTTP,PORT=81$$
    icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=3600, EXTBIND=1 (some OS will not allow to bind ports <1024)
    Admin port details
    icm/server_port_1 = PROT=HTTP,PORT=3200
    #, EXTBIND=1
    icm/HTTP/admin_0 =
    PREFIX=/sap/admin,DOCROOT=./admin,PORT=3200,AUTHFILE=/usr/sap/WEB/SYS/global/security/data/icmauth.txt
    SSL
    icm/HTTP/redirect_0 = PREFIX=/ , TO=http://<friendly URL name>/irj/portal
    WebAS Message Server Parameters
    rdisp/TRACE = 1
    icm/trace_secured_data = 1
    Regards
    Suresh

  • Adobe Premiere Pro CS5.5 Family- 'extracting' for 24 hours and I can't cancel it and start again

    Hi
    I've been trying to download the trial of Adobe Premiere Pro CS5.5 Family for 24 hours now. It downloaded in Adobe Download Assistant fine and the it started 'Extracting'. Its been extracting for 24 hours and the close or pause buttons next to it are not available to press so I can't stop it and try again.
    A message half way through did pop up saying 'opening premier pro, verifying...' but then a warning sign came up saying 'the following disk images couldn't be opended. Reason: Invalid Checksum' . Don't know if that has anything to do with it but on Adobe Download Assistant it is still 'Extracting'.
    I am working on a year old Macbook Pro with a fast connection to the internet.
    Thanks

    buenas dias, yo intentado descargar adobe CS5 standart, premium ... pero todos los ficheros se paran en 49°/° y no van mas, no se que hacer, intentado con todos los exploradores de internet . gracias

  • DART: creating extracts for company codes

    Hi,
    in light of an archiving project of financial documents, extracts needs to be build with DART. This has to  be done on the level of company code. We would like to have approval from the FI department for the DART extracts, but we have currently 22 different company codes. 
    Do you have experience with creating extracts for multinational companies, and what was your way of working for getting approval before archiving ? Were there any external tax auditors involved ?
    thanks for sharing,
    kind regards,
    Rolf

    Hi Rolf,
    For your project you have to make a table with document type's G/L accounts how long you want to let them them in your system. This form (table should be signed of by the bussines and  auditors.
    Note: When you archive data for FI you can archive the documents (BKPF/BSEG and line items. When you only archive the documents you can still see al the postings on line items. When the archive files are still available you can go direct from the line item to the achived document. Have a look to to the archive information system perhaps here you can store more information with linkes to the archive system?
    In some FI reports it is possible to get information out of SAP and the archive system.
    With the table make a proprosal by yourself and let sign that.
    Think about that a lot of information is stored on other places to, like controlling and PCA. Offen there is no reason to keep the FI documents the information is still somewhere els available
    Paul

  • Extraction for Cube 0PM_C05 requires customizing of table T_PMC05

    Hi can any body tell how to solve this error.
    Extraction for Cube 0PM_C05 requires customizing of table T_PMC05.
    Iam loading data to 0PM_C05 CUBE which has a datasource 0PM_PRM_PLCS_1 which is displaying as errors in source systems.
    This is a plant maintenence cube and ia replicated the datasource agian in BI Production and it is active.
    Edited by: manukonda anil kumar on Feb 17, 2011 5:45 AM

    Hi syed
                 Take the help of an ABAP person.
                 There will be same table resembling the name .
    So the data needs to be updated in the corresponding table .
    When the core people are updating data from different palnts and sites accross.
    In my case i haven't moved further.
    This is a configuration change form R/3 side where the data had to be fetched in the orrect table .
    Regards
    Anil .

  • Userexit or BADI for program *RMMRP000* for background job

    Hi,
    We are scheduling background job for MRP through SM36 using program  RMMRP000 or Through Transaction MDBT (MDBT is calling program RMMRP000) which creates PR (through background job).
    I want to default one field in PR (PO Price field in valuation tab in PR default to gross) using any userexit or BADI.
    Can any body suggest me userexit or BADI for program RMMRP000 for background job
    Regards.

    Hi,
    1. The below are the List of  Userexit for this MDBT t.CODE.
    2. But i dont see any one helping to resolve your issue.
    3. May be you should lookg at the Userexit for me21n or relevant Purhcase requisition creation transaction.
    reg
    dsk

  • Logistics extraction for QM - qRFC problem

    Hi,
    I have problem with LO extraction for QM - with delta.
    There are several records in 2 ques (MCEX05 and MCEX05_1), but the job for moving them into BW delta always ends with errors (Message_type_x).
    I'm thinking about deleting this que and start reconstruction for application 05 again.
    Would this help?
    The structure of one DS (2lis_05_qe2) has been changed with append structure, maybe this could also be a problem.
    There is also one doubt:
    does deleting qRFC (transaction LBWQ) affect any other area then just BI extractors for particular application? I'm affraid to harm some ERP processes?
    Thank you,
    Tom

    Hi
    If I got your question properly, If you are trying to change the Data Source (LO) then it would be locked for the users to report on the same.
    Appending / enhancing will break the Delta Runs also some times. Thats the reason whenever we are planning for the Strcture change we will run the Delta and make sure that the Queue has no runs.
    But deleting LBWQ would not effect on ERP Process as it picks up only New/changed Delta Records.
    Hope it helps and clear

  • Error in data extraction for 0TCT_DS22

    Hi All .
    I am facing issue in data extraction for 0TCT_DS22 , its giving message 'error in source system ' and also giving a dump
    Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
    Date and Time 24.05.2010 11:22:53
    Short text
    No more storage space available for extending an internal table.
    What happened?
    You attempted to extend an internal table, but the required space was
    not available.
    As per following thread i updated the table but still data load is failing ( Our system is at EHP1)
    DataSource 0TCT_DS22 not extracting Data
    Any pointers what could be the solution for this data load failure .
    Thanks.

    Hi Neetika,
           This type of error occures due to lack of memory in server or no process is available for request process.
    Please refer below forum.
    Re: Runtime Errors  TSV_TNEW_PAGE_ALLOC_FAILED
    Have you done any custom coding? if yes then check the loop.. endloop statement. (not closing loop)
    Thanks & Regards,
    Ashish

  • Userexit or Badi for vl01n date check

    Hi experts,
                     While preparing VL01N, BLDATE, WADAT,WADAT_IST  date should be a current date,
    if else i won t allow that delivery to PGI. kindly give userexit or badi  for this issue.
    Thanks and Regards
    G.Vendhan

    Hi,
    Use these steps to find Badi easily.
    1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
    2. In 'Display' mode, go to 'Methods' tab.
    3. Double click the method 'Get Instance' to display it source code.
    4. Set a breakpoint on 'CALL METHOD cl_exithandler => get_class_name_by_interface'.
    5. Then run your transaction.
    6. The screen will stop at this method.
    7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI for that transaction.
    Hope this helps u.
    thanks.

  • * Delta Extraction for 0ASSET_ATTR_TEXT

    Hi All,
    Can someone help me for the delta extraction for 0ASSET_ATTR_TEXT datasource.
    Steps performed as per SAP Help
    1. Activated the BADI
    2. Ran the initialization without datatransfer infopackage.
    3. Created new records in R/3 side
    4. I can see the newly created records in the Table : BWFIAA_AEDAT_AS
    5. Ran the delta infopackage ( no records are getting updated)
    When i check in RSA3 with the delta update, its giving an error.
    Please guide me if i am missing any steps
    Regards
    Ram

    Hi Ram,
    Check this note,
    Note 816560 - DeltaInit w/o data transfer does not createe time stamp
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=816560
    Hope this helps....

  • Delta extraction  for masterdata object

    hi,
        can  anybody  tell me the procedure for delta extraction for master data object.
    is it possible!

    Master Data Datasources do allow for delta extraction. You can display datasource in RSA6 and check if it is delta enabled. You will have to initialize with delta to perform delta extraction. RSA7 will give you delta queues in R/3

  • Delta Extraction for 0FI_GL_6

    Hi,
    We are facing a problem in the delta extraction for the data source <b>0FI_GL_6</b>.  0 Records are populated into BW whereas in the Extract checker (RSA3) of the source system shows 1000 records. Moreover the delta queue (RSA7) has an entry for 0FI_GL_6 but no data is displayed inside it.
    Kindly advice.
    Reagards,
    Vidhya

    Hi,
    This extractor works based on time stamps so wait for a day to get the data.
    have a look of the thread :
    Re: delta not working for 0FI_GL_6 & 0EC_PCA_1
    Regards
    Happy Tony

Maybe you are looking for