Userexit + include + error message
Hi friends,
Actually, there is a userexit, we created a new include in it, say XXX, now when I try to edit some code in this include. I have a trouble to compile or check the error,
e.g when I wrote this
code:
FORM KOBED_973.
this is not test
ENDFORM.
FORM KOBEV_973.
ENDFORM.
try to compile it gives me error ( cant compile as its
only include ) and when I do activate, it gives msg,
activate object generate successfully,
Any idea, what I can do to see the error messages ?
Regards,
Message was edited by: Shah H
Hi Shah,
GENERATE the main program of the incude. USe the men options UTILITITES -> MAIN PROGRAM and once you get to the main program generate the program it will check all the syntax for you and throw any error if it exists.
How to test a routine, you must check with your functional consultant. A routine can be triggered from different ways like from output, from copy control and many more different ways.
Cheers
VJ
If it helps some points would be nice
Similar Messages
-
More often than not when I open a pdf file from within Firefox the file fails to open (often you get an error message. "there was an error processing page. A file I/O error has ocurred"). Sometimes the file downloads but is only white pages. I usually then right click the file and save it to my desktop but this is cumbersom!
Ok two things based on the crash report and the steps you took right before the crash:
# Try to disable scrolling acceleration and restart Firefox. Does it continue to crash?
# Try Safe Mode and do the same task as above with email and the pdf [[Troubleshoot Firefox issues using Safe Mode]]
# Also pdf.js may be helpful to read pdfs in the meantime. You can change the default reader in the Preferences/Options > Application menu of Firefox.
# Try to clear out the downloads folder and update flash to version 14 (that should do it)
IF it crashes again please also provide the new crash signatures and we can take a look :-) Sorry for the crashing :-( -
Please Help - Error message when trying to open itunes
Hi
Can someone help pls? I was in the middle of upgrading my version of itunes and my computer crashed. Now when I try to open itunes I get an error message as follows: 'iTunes has encountered a problem and needs to close. We are sorry for the inconvenience'.
I don't know what to do! I am worried I have lost all of my music!?hiya!
'Quick time failed to initialize. Error # - 2095. Please make sure QuickTime is properly installed on this computer'.
okay, let's try a careful standalone QT reinstall:
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b -
Error message when iTunes tries to start.
Whenever I try to start iTunes I get a send error report message. iTunes was working fine until I had to do a system restore, and then this problem started cropping up. I've tried reinstalling several times, and it doesn't seem to work.
Itunes has encountered a problem and needs to close
the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
try to open your QuickTime. does it launch properly, or do you get an error message?
if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.) -
How to display the error message during the web dynpro application runtime
hi,
I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
But when i do the same on server-2,there just show something like:
500 Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version)
Edited by: BingLin Zhong on Feb 18, 2008 2:13 AMThe Sap-Notes 962319:
1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
If it is undefined, proceed with the next step.
If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
Always consider restarting the system after making changes on the settings.
It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again. -
Error message when inbox tries to load
When checking my Yahoo email, Firefox will attempt to open my inbox, but it immediately changes to this message: "There seems to be a problem loading the message 'No Reply'." Then, when I click on the inbox button, it opens with no problem. This only happens in Firefox, so I don't think it's a Yahoo problem. I've checked IE and Opera and it never happens there. It's extremely annoying. Any help will be greatly appreciated.
Itunes has encountered a problem and needs to close
the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
try to open your QuickTime. does it launch properly, or do you get an error message?
if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.) -
Itunes windows xp error message
I recently upgraded to itunes 2. I was able to transfer music so everything appeared ok. Later when I opened itunes I got a message a certain file was missing and advised that I reinstall. So deleted itunes software and reinstalled itunes installer and itunes 6.0. Now when I attempt to open I get a Windows error message saying there is a problem with itunes. I am wondering if there is a problem with QuickTime because I can't open or uninstall. Help!! Thanks
Otnothi Otnot!
I am wondering if there is a problem with QuickTime because I can't open or uninstall.
good call. a broken quicktime is the first thing i check for when people report an "itunes has encountered an error ..." message when they try to launch itunes.
what error message are you getting when you try to uninstall QT? include error message numbers if you're getting any.
love, b -
Error message when opening itunes, quicktime streaming failed to load...
I downloaded itunes, installed it, and when I try to open I get the message "quicktime streaming failed to load because it was already loaded" Then it closes. Anyone know what's going on?
Windows XPokay ... let's try a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b -
ITunes 7.7 - Can't open! Error message - PLEASE HELP!
Hi, I've recently updated to iTunes 7.7 and now I can't open iTunes. I've tried reinstalling itunes, quicktime and even did a system restore, but still couldn't get iTunes to work. Btw, I'm running XP pro w/ SP3. The error message I get is this:
And when I click the "Click Here" link, i get this:
Please help!!when I tried to open quick time i got a rundll error - an exception occurred while trying to run
In that case the QuickTime problem is likely causing the iTune problem. So we'd better try swapping out your existing QuickTime.
Head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If “Hide filename extensions for known file types” is enabled on the PC, then those two files will appear as “QuickTime” and QuickTimeVR”.)
7. Restart your computer.
Now download and save a copy of the latest standalone QuickTime installer to your hard drive. (We'll run the install from there rather than online.)
Latest Quicktime Installers … get the one that doesn’t mention iTunes
Switch off antivirus and antispyware applications prior to the install. Start the install by doubleclicking the QuickTimeInstaller.exe.
If that install goes through okay, restart the PC and try launching iTunes again. Does your iTunes launch properly now?
(If you get an error message on the QuickTime uninstall or standalone reinstall, let us know what it says. Include error message numbers if you're getting any.) -
Can't open iTunes - has error message - Hope someone might be able to help
I had everything working about two weeks ago. I was able to download my CD's on the Nano.. Then my computer had to be reloaded with XP.. Lost iTunes..... I reinstalled it at least three times, but it will not work, even downloaded the new edition.....comes up with the following:
iTunes has encountered a problem and needs to close. We are sorry for the inconvenience. Etc....
What am I doing wrong? Please advise if you have had the same problem..
Thank you.Itunes has encountered a problem and needs to close
the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
try to open your QuickTime. does it launch properly, or do you get an error message?
if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.) -
ITunes/QuickTime "Bad Image" Error Message
Running Windows 2000 Professional on a PC. iTunes and QuickTime are loaded and had been running successfully for a long time. Suddenly, every time I try to open iTunes a box pops up titled "iTunes.exe - Bad Image," and in the box is the error message "The application or DLL C:\ProgramFiles\QuickTime\QTSystem\QuickTime.qts is not a valid Windows image. Please check this against your installation diskette." (There is no installation diskette.) I believe the first time this occurred was just after I had been prompted to download an update to QuickTime, which I did. I cannot close the error message box, neither by clicking on "OK" nor by clicking on the "X". The only way I can get rid of it is to restart the computer. Also, I cannot open iTunes. Any suggestions?
hi Sandy!
With regard to the prompt to upgrade QuickTime, I could be wrong about that, but I am almost sure that I got one of those standard "A New Version of ...... is available. Would you like to download it now?"
Okay ... sorry about that. i might well be wrong about it being unusual. i think i downloaded my 7.1 before i ever actually ran QuickTime on its own. (i was troubleshooting an itunes video sound problem i was having.) the rest of the time, i tend to get my new QTs when a new version of itunes shows up. so i guess i always upgrade before QT ever says to me that there's a new version available.
anyhoo, if you've got a standard QT 7.1 in there, we should start by doing a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b -
Hi all,
Again with the 'BAPI_GOODSMVT_CREATE'. I wat to create a error messages file, where it display me the reason why the paramenter gt_bapigm_headret in some cases is initial.
How can I do it?
Thanks in advance.
Regards, Marisol.There is a tables parameter 'RETURN' which will give you all the messages, including error messages. You have loop through this internal table to find out all the messages. The field MESSAGE of this will give you the error message. Alternatively you can use the ID, NUMBER, MESSAGE_V1, MESSAGE_V2, MESSAGE_V3, MESSAGE_V4 fields and prepare the message yourself.
Srinivas -
I rented a movie about 45 mins ago. It stopped downlaoding at 20 mins of the movie. It gives me an error message and wont finish downloading.
It gives me an error message and wont finish downloading.
What does the error message say? Include error message numbers if you're getting any, please. -
Ca'nt ftp longer (i.e. 4 minutes) flv or f4v files (get error message "waiting for server") I
when I ftp(i.e. "put" or "upload) short flv or f4v files using dreamweaver cs4 the files upload easily and quickly. However, when I try to ftp ("put" or "upload" ) longer (i.e. 4 minutes or longer) flv or f4v files it goes through the ftp process (seeing it in background activity screen) but at the end I always get a message "waiting on server" and the longer files don't get onto hosting server. Is there a setting I need to change or other method I need to use). I have worked with my hosting support tech person but we could not solve this problem.
I'd suggest that you try using a dedicated FTP program like Filezilla or SmartFTP.
http://filezilla-project.org/
Those programs give you much more feedback on what's happening as you attempt to upload files, including error messages, etc.
There is really no difference between uploading large files and small files, the process on the server is exactly the same..UNLESS there are limits to file size or video duration set by your host. So dispite the fact that you have worked with your host support, I'd still say that the problem is server side or being limited by your Internet service provider... unless the video files you are attempting to upload are corrupted.
You didn't say if any portion of the larger video files were uploaded...and FTP program will show you whether or not ANY of the file was uploaded and at what point it stopped. You also didn't mention how large the video files where.... sort of where the "tipping point" is in file size (video duration of course is no measure of file size).
Just to reassure you, the file size of a video file will have no bearing on your ability to FTP unless your host or ISP is limiting you in some way.
I regularly Live stream events and also record them. An 8 hr event will produce roughly 1.5GB of compressed video. I use SmartFTP, with a reputable host and can upload the entire set of 1.5GB of video files (each about 50MB) over a 1000kbps upload connection without problem. Recently during a movie production project, we uploaded a number of single video file which each where over 1GB a piece.
So there is really no problem uploading video files unless there are restriction on you account from the host or the ISP.
Best wishes,
Adninjastrator -
TS4223 How do I bypass error message and download movie to my computer, then transfer to my iPod?
How do I bypass error message just to download HD movie to my computer, so I can transfer to my iPod and/or my iPhone?
What does the error message say? (Precise text, please. Include error message numbers if you're getting any.)
Maybe you are looking for
-
I changed my Apple ID a while ago but my iPad is asking for the old one to set up iCloud?
I changed my Apple ID a while ago because I got a new email address, and it works fine when I am downloading apps or music etc. but I just got the iOS 6 update on my iPad and it's asking for the password to my old apple ID to set up iCloud, iMessage,
-
Looking for app to see network activity in shell
I have conky showing me my box's up/down speed just fine but I have a server on my home network too, and I'd love some prog that can show entire network traffic in shell, if possible speed and amount transferred, etc. Very much appreciate any recomme
-
How can I sync address book to iPhone 3?
How can I sync address book from mac book pro to iPhone 3?
-
hi, i just moved to tampa and want to switch my number to this area code, so im going be getting a new at&t sim card.. how can i transfer all my numbers over to the new sim card? is there to a way to save the numbers to the phone?
-
Does anyone know how to burn multiple disk images onto a single dvd that will play in a stand alone dvd player? I tried this by dragging the movies onto the dvd, as disk utility only allowed me to select one image. However, I couldn't open the files