UserExit Variable leads to warning: "You have no authority...

Hello Experts,
I have a question concerning a UserExit Variable.
I created a UserExit Variable on the InfoObject 0CO_AREA. In addition, I created a DSO in which I have two fields. The Username and the 0CO_AREA. The DSO contains the authorizations.
I also checked in RSSM and no authorization objects are activated.
When a User executes the Query the Variable takes his or her Username and checks in the DSO for which 0CO_AREAs the User is authorized.
The variable itself works fine but when I execute the Query in the BEx or the Web I don't receive any error or warning because I have a "ALMOST ALL" authorization. Nevertheless we created a role for the users and in the BEx everything is fine as well but for those user a warning appears when they execute the query on the web saying:
"You have no authority for a characteristic value of characteristic 0CO_AREA".
Nevertheless the results are correct. All I want is to get rid of the warning.
Thanks in advance.
Stefan

Hello Snatic,
thank you for your help but we have not been using this authorization concept yet.
Therefore we traced the query when executed on the web. Unfortunately the trace doesn't show any strange messages.
Also quite interesting: When I copy the User (exact the same authorizations) and execute the Query on the Web it only leads to the warning but the original user receives an Error.
The Web Error message says:  java.lang.UnsupportedOperationException
When I look further down the page it says.
WARNING: You have no authority ...
Very very strange
BR
Stefan

Similar Messages

  • WARNING -"You have entered an incorrect password 5 times. After 10 unsuccessful attempts your device data will be erased."

    Dear All, Good day!I just I really need your help badly with regard to my phone.  I used to charge the battery of my phone using USB cable on my laptop and today morning my phone is working just fine, but I was running out of battery so I tried to charge it. After few minutes, when I am about to use it, the lock code is not working anymore. I didn’t changed my password or done anything new and I am 101% sure that I have entered my password correctly. However, there’s a message showing : WARNING -"You have entered an incorrect password 5 times. After 10 unsuccessful attempts your device data will be erased."  The screen shows Incorrect Password (6/10), but I am entering my correct code again and again and still not working. I restarted it many times and still showing the same thing. Now, I can’t get in and use my phone. I tried to call my number and it still reachable. Thank you so much in advance 

    To: JSanders, Hi there! thanks for spending time reading my queries and replying on it.YES! I am 101% positive with my security code. Thank God I was able to recover it and use my phone again. Just an input for those who might experience the same thing. Using Black Berry Z30, once you have the dialog box saying:WARNING -"You have entered an incorrect password 5 times. After 10 unsuccessful attempts your device data will be erased." and shows that you still have atleast 3-4 available chances to enter the code, just type "blackberry" thereafter another screen will pop-up and will ask to enter again your password. As long as you are 100% sure about your password, you'll be able to enter and get it back. Now, I am enjoying again my Z30.  

  • Some of the items in the itunes library not were not copied to the itunes phone because you have not authorized them for this computer

    I'm getting a "some of the items in the itunes library not were not copied to the itunes phone because you have not authorized them for this computer" error message for some of my songs when I'm syncing to my iphone to my laptop.  I've authorized the computer, but I still get this error messge.  Any suggestions?

    Were these items purchased with a different Apple ID than the one you normally use?  If so, authorized the computer for that Apple ID.

  • FSCM 9.0: Operator Profile Indicates You have No Authority to Enter Vendor

    Folks,
    Hello. I am working on FSCM 9.0 and login User ID is VP1. I want to add new Vendors' information into the Vendor module. when I click Vendor > Add, the message comes up as follows:
    " Your operator profile indicates that you have no authority to enter Vendors. Contact your system administrator."
    My login user ID is VP1. I have checked PeopleTools > Security > User Profile for VP1 and add all of Roles into VP1.
    But the above problem is still not solved.
    Does any folks understand to solve the above problem ? Thanks.

    Go to Setup Financials/Supply Chain->Common Definitions->User Preferences->Define User Preferences
    Select the VP1 userid, then under Product Preference select Procurement. There should be a hyperlink for Vendor Processing Authority.
    You can also check the underlying table, PS_OPR_DEF_TBL_VND, the column is AUTH_VNDR_UNCERTFY, or run the User Preferences Report and select Report on All Products and Report on All Users, then scan the output for Vendor Maintenance to see which users already have authority to enter.
    Regards,
    Bob

  • WARNING -"You have entered an incorrect password 5 times. After 10 unsuccessf​ul attempts your device data will be erased."

    Hi ,
    i have a newer z30
    I am getting the above message however when i try entering anything it does not register and stays at password incorrect 5 times.
    I would be happy erasing my phone is there a way to force erase it on lock screen or reset it

    You will  have to visit the Blackberry web page to re-set your account. Most likely your phone is wiped. If you bought a used phone or you are trying to change accounts on your phone, the phone must be first completely wiped.
    Reset Blackberry ID Account Password:
    https://blackberryid.blackberry.com/bbid/recoverpassword/
    You will need a computer with Internet access to log in to the email account you used for your Phone's ID.
    Jerry G.

  • Warning: you have exceeded the limit of 100 nested folders

    in red letters in Disk Utility. Machine slows and slows. Where, how, why, and whence do these folders get nested? and how to unnest, which one doesnt know which they are or where they are, out of thousands of folders? No utility out there can help, it seems.
    Jascha Kessler

    I have the exact same problem. I have an iMac G3,
    600MHz, 512MB RAM, 40 GB capacity, running 10.4.7. I
    have been using Apple Macs since their innovation.
    My computer is running a little slower, but I do not
    know if "Nesting of folders has exceeded the
    recommended limit of 100" is the culprit.
    I use Photoshop (on 9.2.2) quite a lot, but otherwise
    I use 10.4.7 all the time for everything else. I have
    searched the Information pages and Discussion panels
    for an explanation and solution, all to no avail.
    Nothing dastardly appears to have happened or about
    to happen to my computer, so I shall just keep on
    using it regardless. In the meantime, however, I
    shall keep looking for an explanation and I hope, a
    solution.
    iMac
    Mac OS X (10.4.5) 600 MHz Power PC G 3 512 MB
    SDRAM
    thanks for your interest. I dont know what causes all those nested folders; but I am on 10.4.8 now and no change in (mis)behavior. I run a G4 with now with 1600 speed from a replaced heart or whatever, and have 1.25 G Ram.. I find that I can locate all Empty folders with Spring cleaning, and delete them and get the machine running better and normally. I also clean up regularly with DISK WARRION, which seems to be hecessary, as well as Drive Genius from ProSoft Engineering. Meanwhile, I buy lottery tix, in hopes of a later Mac Pro desktop
    Jascha Kessler

  • Including rhis one, you have autorized one computer out of your available 4 , what is that mean?

    including rhis one, you have autorized one computer out of your available 4 , what is that mean?

    It means you had four of your five total authorizations available, and you have now used one more. You now have three left. You have two authorized computers.

  • Error 1032 - Ensure you have write permissions to the following registry entries:

    I can not copy and paste the page into this forum box so ill have to put the link to the page
    at the bottom of this page has the problem aparently for the reason why i can not install adobe flash player 10.1
    in the box it says
    the installation encountered errors
    the active x control for flash player could not be registered
    then it says
    error 1032- ensure you have the write permisson to the following registry entiries.
    please can some read this as ive sadi i can not copy and paste all of these entry permission i do not have aclue what they are on about.
    here is the link.
    http://kb2.adobe.com/cps/191/tn_19166.html#main_Error codes for Flash Player 10.1
    thank you
    for any help

    Hi, I saw that email notification come in and just had to comment. I re-read your thread and was laughing at it all. I can't believe you still have that great sense of humor after all of the trouble.
    Did you hibernate over the Winter and just waking up? LOL
    Perhaps Pat will have a way you can check to make sure you have full authority for that Administrator Account.
    I know there is the Clock test. Right click over the clock hour/minute and then click on Adjust Date/Time. If you can see the clock and calendar Microsoft says that you have Permission needed to Install Programs. If you don't see that, then there is a problem.
    Thanks,
    eidnolb

  • How do I authorize computer? I only have 3 authorized but itunes says I have 5

    Help

    About De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
    Also, see iTunes Store- About authorization and deauthorization.

  • When I go to lead itunes on my computer I get a message that says "Apple mobile device" failed to start. Verify that you have sufficent privleges to start system services.  What does this mean?

    When I go to lead itunes on my computer I get a message that says "Apple mobile device" failed to start. Verify that you have sufficent privleges to start system services.  What does this mean?

    It means iTunes has failed to update propely. See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I have a MacBook Pro version 10.7.5 Every time I try to open iphoto I get the warning: "To open your library with this version of iPhoto, it first needs to be prepared. You have opened this photo library with a newer version of iPhoto." How do I do this?

    I have a MacBook Pro version 10.7.5 Every time I try to open iphoto I get the warning: "To open your library with this version of iPhoto, it first needs to be prepared. You have opened this photo library with a newer version of iPhoto." How do I do this? I recently bought aperature, and it has been since then that I get this warning.
    Thank you!

    No I have not tried those things. I don't even know what that means I suppose I have the newest version of aperature; I just bought it 4 days ago.

  • When I try to do financial transactions I get a warning message "You have requested an encrypted page that contains some unencrypted information. Information that you see or enter on this page could easily be read by a third party." How much do I need to

    When I try to process financial information such as log onto my banking account or my paypal account, or pay for something online I get a warning message "You have requested an encrypted page that contains some unencrypted information. Information that you see or enter on this page could easily be read by a third party." I also never get a padlock to show that I am on a secure site. How much do I need to worry or what should I do?
    == URL of affected sites ==
    http://

    I would not trust that on a banking site. If it were just a forum, no problem, but anything unencrypted during banking is suspicious.

  • Is it possible to make a fillable form have variable fields - so if you select a radio button it triggers a different form field to be seen depending on which radio button is selected??

    Is it possible to make a fillable form have variable fields - so if you select a radio button it triggers a different form field to be seen depending on which radio button is selected??

    Yes, one needs to use some custom JavaScript code to control the other fields' properties.
    Disabling (graying-out) Form Fields by Thom Parker

  • I get a warning that says:Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party. What can I do to get rid of it?

    Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party.
    Are you sure you want to continue sending this information?
    I get two options: Continue or Cancel.
    No matter which one makes the warning repeat itself and I want to change my settings to make it dissapear

    You should be able to continue if you click Continue once.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem.
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Hello  I was trying the latest version of Mathmagic pro edition for indesign. I found that the leading is not automatically done in Indesign, Ihave attached to files where equation have overlapped while working with mathmagic. Do you have a solution for t

    Hello
    I was trying the latest version of Mathmagic pro edition for indesign. I found that the leading is not automatically done in Indesign, Ihave attached to files where equation have overlapped while working with mathmagic. Do you have a solution for this?

    The forums don't accept attachments. You can embed an image in a post using the camera icon in the editor, like this:
    or you can provide a link to an external file on a hosting service.

Maybe you are looking for