Username and Password on Testing Server

I am currently running Macromedia Dreamweaver 8 on a PC with
Windows XP. When i set up a new site i go thourgh and enter all the
information. When i get to the testing server to enter the sites
username and password, it works fine. I always click the save
username and password. When i close out of Dreamweaver and go back
in the username and password always gets erased. Is there a way to
fix this problem?
Thanks

> Macromedia Dreamweaver 8
Have you installed the 8.02 updater?
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Similar Messages

Reg : How can I get Username and Password in FTP Server in HANA

Hi All,
Any one can you please guide me....How can i get username and Password of FTP Server in SAP HANA?
Regards,
Arjun

Hi Arjun,
Are you looking for external authentication(External ID option) in HANA Studio instead of logging by entering HANA User and Pwd(which is internal)?
You can look for the following Security guide which will give you some insight on this.
http://help.sap.com/hana/hana1_sec_en.pdf
Rgds,
Murali

Dynamically pass the username and password to report server to invoke reports

Hi
The scenario is as follows:-
9iAS is installed under - Windows 2000 (web server and report Server 6i) and everything works fine.
We have developed a page using pl/sql cartrige (oracle 8i), from that a report is invoked with some parameters. However, the userid and password is stored under keymap file (cgicmd.dat).
Is there anyway to pass dynamically the username and password to report server in order to invoke the report.?
Can any one advise?
null

Check out
http://serverfault.com/questions/371907/can-you-pass-user-pass-for-http-basic-authentication-in-url-parameters
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

I keep getting the message " The server 192.168.1.1:80 requires a username and password. The server says: RE1000"?

Why am I getting this message and how can I fix it? I can't access any websites. What username and password an I supposed to put? I'm dumb with this stuff so please provide a simple explanation? Thanks.

Do you mean the password of the wifi network i'm connected to?

How to pass username and password to ftp server using jdk1.4

My following codes runs fine when i give full access to the anonymous user on ftp server. But when the ftp server is password protected the code gives me error
"sun.net.ftp.FtploginException"...How can i solve it???
import java.net.*;
import java.io.*;
import java.security.*;
class Dnet
public static void main(String r[])
try
File fi=null;
FileInputStream fis=null;
BufferedReader buff=null;
OutputStream os=null;
InputStream ins=null;
String s=null;
String ar[]=null;
int i=0;
String li=null;
String ht="i will be there for u";
fi=new File("c:/nick");
ar=fi.list();
System.out.println(ar[0]);
for(i=0;i<ar.length;i++)
URL ul1=new URL("ftp://pg-12/satyen/"+ar);
URLConnection ucon=ul1.openConnection();
ucon.setDoOutput(true);
os=ucon.getOutputStream();
fis=new FileInputStream("c:/nick/"+ar);
buff=new BufferedReader(new InputStreamReader(fis));
while((li=buff.readLine())!=null)
os.write(li.getBytes());
os.flush();
os.close();
}catch(Exception e)
System.out.println("error is: "+e);
}

Hi,
you need to extend the URL to :
ftp://user:password@host/path/file
e.q :
URL ul1=new URL("ftp://user:passwd@pg-12/satyen/"+ar);
SKA

SQL REPORTING USERNAME AND PASSWORD

I use SQL Server Reporting Services for reporting purpose and create reporting using and attach database then when I deploy any report it shows me username and password in SQL Server Reporting Service.
So what does it mean by password and username and where do I get this username and password for SQL Server Reporting Service?
i have not any password in windows and in SQL Server Database
HERE IS PICTURE
So what can I do?

Going to that link will not run/execute the report. It should either prompt you to login or login you automatically and bring you to the landing page. If you are not being prompted to login, you should consider looking at making sure all the
appropriate services are running by looking at SQL Server Configuration Manager (i.e., the database engine and reporting services). It's also possible that your browser is configured to login you automatically if you are not being prompted to login,
which could be issue if the account you are logged into your computer as is not an administrator.
The next thing to consider is disabling any antivirus or security software that may interfere with the connection. Lastly try different browsers (e.g., firefox, Chrome, and IE) and see if you are getting any different error messages. Also consider
substituting "lenovo-pc" with "localhost". I have also seen the issue described in this article where you may need to disable the loopback check.
http://www.sqlservercentral.com/blogs/sqldownsouth/2009/09/28/reporting-services-disable-loop-back-check/
You aren't going to be able to deploy anything unless you can connect to SSRS via a web browser.

Outlook 2013 - Exchange 2013 - Prompts for username and password when EWS basic authentication is enabled

So we have an Exchange 2013 environment, and a CRM solution that requires basic authentication to EWS internally. Problem is, after a reboot of our Exchange server, all of our Outlook clients begin prompting for username and password (which nothing
works) which also starts locking users AD accounts out due to failed login attempts (somehow). If I disabled basic authentication on EWS, Outlook authenticates as normal using NTLM and there are no issues. Once Outlook has authenticated, I can
turn back on basic authentication, and Outlook will be fine until the next time the Exchange server is rebooted.
Any ideas?

Hi,
According to your description, I understand that Outlook client prompted for username and password when Exchange server restart and basic authentication is enabled for EWS.
If I misunderstand your concern, please do not hesitate to let me know.
It’s normal. This caused by the difference between basic authentication and NTML authentication:
Basic, with any version of Outlook prior to 2010, results in a pop up dialog asking for creds. Outlook 2010 makes the 'save this password' actually work, so in an Outlook 2010 or later world, Basic can mean no need to authenticate every time you open/reconnect,
but in all earlier versions, you will have to enter creds every time.
NTLM, when used by a client that is domain joined and logged in with cached creds, results in the client simply sending the cached in creds to the server, resulting in what looks like a pretty seamless single sign on experience. However, if you want to do pre-authentication
at something like TMG, and not let the traffic go all the way to CAS, you need to configure TMG for this.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Hp printer requires a username and password

My HP Deskjet F4583 wireless printer worked wonders with my Windows XP.
Now we've all upgraded to Windows 7 (very grumpy - everything worked just fine on XP)
Tried printing through wireless office network (that "I" set up), and suddenly get this:
"The server 10.0.0.3:80 requires a username and password.
THe server says: HP Printer Networking@."
followed by the appropriate fields.
So now what?
Since when was a username/ password option available - believe me I would have tried to omit it when creating the network - we don't have time to "play" with our gadgets; we just expect them to work with minimum fuss.
Please help...
This question was solved.
View Solution.

dave-k2 wrote:
The exact network was shown in my question - it is an 802.11 WiFi network configured for WPA2 authentication.
It is not an open network with no encryption or authentication.
It is not a walled garden network with no 802.11 encryption but using a web browser for authentication.
It is not a WPA2-PSK network with a shared key for 802.11 encryption.
It is a WPA2 network with 802.11 encryption and EAP authentication to a RADIUS server. It needs the printer supplicant to supply a username and a password. I own neither the AP nor the RADIUS server for this network, they are owned by the college my child attends.
There you go. Need to ask your IT department how to connect because the printer will never connect with a browser authentication. Also not supported on a Radius server.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

MS OUTLOOK PROMPT USERNAME AND PASSWORD REPEATLY WHEN WE LOGIN WINDOWS 8.1 WITH DOMAIN USER ON WINDOWS SERVER 2008R2

Dear Sir
My name is sandeep and i have a technical issue with MS office Outlook 2007 standard. the problem is i have windows 8.1 pro. and i have installed office 2007 standard on it. i have also joined this windows 8.1 to Domain Network(I have
domain Server on Windows server 2008R2) now problem is that when i login with domain user on this windows 8.1 and configure my MS outlook the it prompts user name and password again and again showing error "
Server responded -ERR access denied" and if i login windows 8.1 with its local administrator user the all runs file then ms outlook does
not prompt for username and password. this problem with only windows 8.1 domain login.. please suggest what to do and how this problem will be resolved..
Regards
sandeep Kumar

Hi,
Did it work correctly before when logging in with domain user account? If so, please try opening Control Panel > Credential Manager and remove the cached credential entry of the Outlook account, and then restart Outlook to test the issue again.
See:
https://support.microsoft.com/en-us/kb/2762344/en-us
Please also try logging into your email account from webmail access to see if there is any error.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

HP 8500 PLUS-scan to email - "SMTP server want approval- control SAMTP username and password"

I have this brand new PRO 8500 PLUS machine, and everything is working except for the "scan to email" function.
I did the setup in the web interface, in which I configured my GMAIL account to be the outgoing account in the printer.
In the end I pressed "save and test" and it reported OK! I used my full GMAIL adress as SMTP username, and my GMAIL password as password.
However, when I scan a paper and try send it to myself (same adress as confgured as outgoing in printer) it says something like(bad translation...)
"SMTP server demands approval - check that SAMTP username and password is set"
Network config is:
IP adress: 192.168.0.183
Subnett mask: 255.255.255.0
Standard gateway: 192.168.0.1
DHCP
Primary DNS server: 192.168.0.1
Secundary DNS server: 0.0.0.0
Printer is connected wirelessly to a DLINK DIR 655 .
This question was solved.
View Solution.

Hey Cartman9090,
Alright i did a little bit of researching and this is what i was able to come up with. There are two separate settings that perform two different actions.
1. Under settings in the printer EWS you have email servers and individual settings for alerts. The email server settings under setting in the ews allow you to set up the product to send problem and status alerts to anyone through e-mail messages. When this function is configured, alerts are automatically triggered about supplies, paper-path status, and other service and advisory information.
2. Under scan when configuring the scan to email in the EWS this is for configuring the e-mail address which will appear in the FROM portion of the e-mail message sent by the printer. The device allows you to scan documents and send them to one or more e-mail addresses as attachments—without additional scanning software. You do not need to scan files from your computer and attach them to e-mail messages. In addition to send scanned files as emails the device must use a outgoing email profile configured with an outgoing email account.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
(Although I am employed by HP, I am speaking for myself and not for HP)

Server 2003 VPN clients can't verify username and password

Hi,
Hoping someone can help or point me in the right direction. I have a Windows Server 2003 R2 standard SP2 running RRAS. It has Dual NIC's and is configured for PPTP VPN. I am using a BT Business Hub 5 for internet access and using the BT Static IP service.
The BT Hub assigns the static IP address chosen to the Server using DHCP. The firewall is configured to port forward PPTP traffic to the 2003 server. This all works correctly.
The 2003 server is on a domain where the DC is a 2008 R2 server. The DC also acts as the DNS and DHCP for the network.
The default gateway for the domain is pointed towards our WinGate proxy server which also acts as a DNS server.
The 2003 server LAN NIC is configured manually, usually I would not configure a deafult gateway on the LAN NIC as the WAN NIC needs the default gateway for the BT Hub.
The problem I am having is if a default gateway is configured on the LAN NIC, I can connect to the VPN and it will logon to the network. Once connected everything works ok. If the connection drops, when trying to reconnect the client can no longer verify
the user name and password against the domain and the connection is refused.
If I do not have a default gateway configured in the LAN NIC the VPN clients can not verify the username and password for the domain at all and I get RPC failure errors in the event viewer with the source dnsapi.
Once this error occurs the only way I can get the clients to reconnect is to disable the WAN NIC, restart the RRAS service and enable the WAN NIC again.
Any insight will be much appreciated.

Hello,
for Networking configuration questions better ask in
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home#forum=winserverNIS&filter=alltypes&sort=lastpostdesc&content=Search
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How do I connect to an SMTP server that requires a username and password?

Hi,
I am currently working on a project for university which requires me to send and receive email. I was until this week able to send mail no problem, but now the SMTP server has been upgraded so that each time a mail is sent it requires the username and password.
Ideally the connection should be made using TLS/SSL, and not use the Authenticator method. I want to pass the username and password directly if possible.
I've been trying to use the following but have been getting handshake, and other exceptions:
SMTPSSLTransport smtpSSLtransport = new SMTPSSLTransport(session,
                    new URLName("smtp", smtpHost, port, null-File,
                    "USERNAME", "PASSWORD"));
        smtpSSLtransport.setStartTLS(true);
        smtpSSLtransport.connect(new Socket(smtpHost, port));
        smtpSSLtransport.sendMessage(smtpMessage,                                                     message.getAllRecipients());
        smtpSSLtransport.close();Can anyone correct this piece of code for me or point me in the right direction of what classes and methods I should be using?
Many thanks in advance,
Gordon

I always wonder what misleads people to do things this way.
Was there some example you saw that suggested that instantiating
an SMTPSSLTransport was the correct approach? I hope not.
See the smtpsend.java demo program for how to use SMTP
authentication. If you need to use SSL, see the SSLNOTES.txt
file for hints on using the "smtps" protocol. smtpsend.java also
illustrates use of SSL, but you'll need to fix a bug in it to use the
correct property names ("mail.smtps.auth", etc.).

Username and Password for Pushes to a Team Foundation Server

Hello,
I have a team foundation server with a collection of projects, all of which use Git for their version control. One of my projects, is basically a bunch of Excel files with macros, so I do all my source code editing in Excel's VBA editor and not in
Visual Studio. I want to push my local changes to the server using Git Gui, but when I try to do so, the gui asks me for a username and password. I am the sole administrator of this server and all its projects, so I should have access to the username
and password, but I have no idea what they are or where to find/change them online. Does anyone know where I can find this information?
Thanks in advance!

To delete an offered choice for the username, select the entry in the drop-down list and press the "'''Del'''" key.

Prompting for UserName and Password when I click Report Server Web Service URLs in ssrs 2008 R2

Hi All,
I am using SQL Server Reporting services 2008 R2 . When I tried to open report server webservice URL in SSRS 2008 R2 It is prompting username and password. I tried to resolve the issue by deleting the  line in rsreportserver.config but still I am getting the same prompt
and i tried by putting the server URL in trusted sites in IE also still no luck. I referred the below link 'http://blogs.msdn.com/b/lukaszp/archive/2008/03/26/solving-the-reporting-services-login-issue-in-the-february-ctp-of-sql-server-2008.aspx'
I am getting the same error.
Can anyone help me out to resolve this issue easily.
Thanks
Dathy

Hi Dathy,
Generally, this is a very common issue in Reporting Services 2008 R2, the blog you post is a good blog that summary the common solutions. If it doesn’t help, could you please try the following:
Open Internet Explorer, go to Tools and click on Internet Options.
Under the Security tab, click on Trusted sites and click the Sites button and Add Report Manager/Report Server URL to the trusted sites.
Then click Custom Level, and check the option Automatic logon with current user name and password.
Repeat step 3 and step 4 for Local Intranet.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

The server at Mac OS X Server Web Services requires a username and password

I am running SL Server 10.6.2, wiki works but when a person clicks an attached file in a wiki and then selects "open" they get a login popup with the notification The server at Mac OS X Server Web Services requires a username and password. It doesn't matter what they put into the login/pass it comes back. If they hit cancel then the document opens. If they click save then it saves with no issue. I can type in the admin login/pass of the server and it works. Does this mean the security settings to the location of the files is wrong? Any help is greatly appreciated!

By the way they are using Internet Explorer 7 when opening these documents.

Username and Password on Testing Server

Similar Messages

Maybe you are looking for