Username and Password Required for Wifi Connection, Not Being Asked for Username

I just updated my iphone 4s to ios 8 and attempted to join my school's wireless network, which requires both a username and a password. i am being asked for a password but not a username.
my question here is how to have the username be requested as well.
thank you in advance for answering.

Hi, did you ever find a solution to this? I see your post is old, but the exact same thing has happened to me and I can't figure out what the generic username and password would be. Any insight you have would be most helpful. Thanks!

Similar Messages

Airplay mirroring problem:when i change slide mirroring from off to on ,my new i pad lost wi fi connection and apple tv lost wifi connection:ihave last software for both.Can u help me?thanks

when i change slide mirroring from off to on ,my new i pad lost wi fi connection and apple tv lost wifi connection:ihave last software for both.Can u help me?thanks.
when i use i pad with apple tv for see my photo,youtube and movies all ok.

I suspect that the problem is in your router. Do NOT consider your router to be blameless if some other devices seem to work with it.
Try restarting your WiFi router by removing power for 30 seconds. Don't just turn it Off. On many routers that doesn't really do anything but put the router into standby mode. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
There is a chance that some services turned on in your router could be causing problems. Look for a setting called QoS (Quality of Service). If ON turn it OFF.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
See also here: http://www.apple.com/support/ipad/wifi/

I earesed my iphone 4s and reset it so they ask me to activate my phone, after puting my username and password they told it's not correct

i earesed my iphone 4s, and reset it ,so they ask me to activate my phone, after puting my username and password they told it's not correct.

Did you purchase this phone new or second hand.
If second hand you probably ran into this Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
you will need the original owners info. Find My iPhone Activation Lock - Apple Support

Emails not being recieved, tried removing all passwords, not being asked for one when I re-open thunderbird

stopped receiving emails 3 days ago to both accounts I have. On line at verizion I see the new emails but Thunderbird is not opening them. Any suggestions? Thanks

If you deleted all password in Thunderbrd and are not being asked for them that points straight at your anti virus program and it's "password vault" messing up. Try disabling email scanning in your internet security suite.

Resetting username and password, but I have two iPhones using the same username and password. Can I delete the App Store user name on one device without affecting the other phone?

When we bought our daughter her iPhone I thought it would be a great idea for her to use my username and password for her App Store. As she is learning to download and search off apps, it appears that this May not hand been a good idea as the apps I have on MY iPhone, are showing as already downloaded and on our cloud. I'd prefer to change the username on her device, but in looking I am noticing that I will probably be deleting the username and password on both of our devices and then I will have to reset for both of us. Am I correct?

If you create an Apple ID for your daughter, signing out of the existing Apple ID with the iTunes & App Store on her iPhone will not change anything on your iPhone.
All apps include DRM protection which is tied to the Apple ID that was used to download the apps.
If she starts using her Apple ID to download apps, when there is an app update for an app on her iPhone that was downloaded with the current shared Apple ID, she will need to use that Apple ID and password to download the app updates.

Just rebooted ipad, and now facetime and i messaging not working. I put in my apple user id(email) and password code. says network connection not available, but my iphone works fine on the wifi.??i can text throug iphone, just not ipad??any bright ideas w

Hi there. I have the ipad 3, and just last night had to reboot and do the upgrade, now my texting and facetime on it is not working...it states that when I click to activate it, and put in my user id(email) and passcode....that" could not sign in...please chekc network connection and try again".....well my Wifi connection is fine, and i can text and facetime fine from my iphone..just not the ipad now.....any ideas why it will not take my user id and passcode?...the passcode works fine on my iphone.

Hello cohenj80,
Thank you for the details about the FaceTime and iMessage activation issue you are experiencing on your iPad 3. I recommend following the steps in this article when you are not able to sign into FaceTime or iMessage on your iPad:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Best,
Sheila M.

ADSL network username and password required

Help, I've got someone trying to sort my home wireless but he's asking for my BT ADSL Network Logon Username & Password - I cant seem to find anywhere or have any record. Does anyone out there know?

If it is the Router login you require it is [email protected] also known as broadband user name, with no password needed.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Not being asked for credentials in SSRS 2008 R2 for Firefox and Safari

I have an instance of SSRS 2008 that is currently working on all browsers (the URL is something like reports.foo/reports).
I spun up a new instance of SSRS and placed it on the url report01.foo/reports. This new instance is connected to a different domain (I am spining up a Active Directory Domain and trying to build out our infrastructure, so the logins are different).
I am able to access the new URL (report01.foo/reports) from IE and Chrome. It is asking for the username/password and able to get on just fine.
However, when I try to go to the new URL (report01.foo/reports) using Safari and Firefox, it never asks for credentials and shows a blank page. This does not happen for the old URL (reports.foo/reports), only the new URL.
Any ideas?

Hi Ben,
Per my understanding that you have configured windows authentication and which by default will not prompt for credential. So I assumed you have changed the User Authentication setting in the security setting to pop up for credential, for example like below(IE),
If so, your issue about the pop up credetial not pop up in Firefox and Safari can be caused by the related security setting, If you give Anonymous User rights, you may got the blank page:
Details information about similar issue in threads below for your reference:
how to change reporting service site seurity setting?
SSRS in firefox not asking for credentials
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Tip for Mail certificates not being honored for parked domains

I was having trouble with certificates not being honored, such that when my imap mail was being checked I constantly had the warning box come up to tell me the certificate was not valid. I would show the certificate, tell it to be trusted always, and yet I'd still see the triangle warning next to my inbox, and have trouble connecting. Then I saw a post about having multiple domains pointed to the same server, so I forwarded from one domain to the other and now the certificate is honored.
The other domain I had was parked at the same domain by my host, so the underlying imap server domain was the same for both. That must have caused a conflict in having both certificates be honored, and indeed only one of them at a time would work. Deleting one of the accounts solved the problem, though I had to set up forwarding to bring all my mail from one to the other.
While the problem is solved, it seems like there ought to be a way that I can have mail to my main domain and parked domain using the same underlying domain imap server not cause this conflict, but in the meantime I'll just have to forward from the parked to the main domain.
Just wanted to share the solution here.

Alex Thanks for the reply
my entry in amavisd.conf reads as follows:
@localdomainsmaps = ( [".$mydomain"] ); # list of all local domains
I thought this was supposed to pick up all the local aliases?
What does changing to ( 1 ); do differently to above??
TIA
Tony

I am setting up a used Airport Express. It works fine with my computer for internet connection. Now I am setting it up for Tivo connection. They ask for a Gateway router number. Where can I find this number?

I am setting up a used Airport Express. It works fine and my computer can get on the internet whith no problems.
I want to enable my Tivo box to connect to this wifi net, Tivo asks for a Gateway Router number. Where can I find this number?

The "gateway" number for your AirPort Express, by default, is 10.0.1.1

Password for oc4jadmin is not being set for silent install.

Application Server 10.1.3 for Windows
I have recorded a silent install response file. I have added the following line in order to set the password of the oc4jadmin account, but it does not appear to work because I get an invalid username/password when loggin in to the App Server console.
oracle.iappserver.instance:szl_InstanceInformation={ "cm1" , "hello123" , "hello123" }
This line worked fine in version 10.1.2.
Any clues on what could be going wrong?
- Thanks

Can you try with the following line in the install response file:
sl_adminDialogReturn={"ias7023","oc4jadmin","welcome1","welcome1","Using the local Application Server Control installed with this instance"}

How do I connect to an SMTP server that requires a username and password?

Hi,
I am currently working on a project for university which requires me to send and receive email. I was until this week able to send mail no problem, but now the SMTP server has been upgraded so that each time a mail is sent it requires the username and password.
Ideally the connection should be made using TLS/SSL, and not use the Authenticator method. I want to pass the username and password directly if possible.
I've been trying to use the following but have been getting handshake, and other exceptions:
SMTPSSLTransport smtpSSLtransport = new SMTPSSLTransport(session,
                    new URLName("smtp", smtpHost, port, null-File,
                    "USERNAME", "PASSWORD"));
        smtpSSLtransport.setStartTLS(true);
        smtpSSLtransport.connect(new Socket(smtpHost, port));
        smtpSSLtransport.sendMessage(smtpMessage,                                                     message.getAllRecipients());
        smtpSSLtransport.close();Can anyone correct this piece of code for me or point me in the right direction of what classes and methods I should be using?
Many thanks in advance,
Gordon

I always wonder what misleads people to do things this way.
Was there some example you saw that suggested that instantiating
an SMTPSSLTransport was the correct approach? I hope not.
See the smtpsend.java demo program for how to use SMTP
authentication. If you need to use SSL, see the SSLNOTES.txt
file for hints on using the "smtps" protocol. smtpsend.java also
illustrates use of SSL, but you'll need to fix a bug in it to use the
correct property names ("mail.smtps.auth", etc.).

How do you make connection password use single username and password in P/S

Hi
I have installed OBIEE as a standalone on a Windows 2003 server using OC4J and AUTHENTICATION_TYPE = BYPASS_NQS.
I have created a repository using an ODBC connection to a Netezza database. The implementation we have is that we use a single username and password (readonly) to the database.
I have created the physical, business and presentation layers and the repository is consistent and loadas up into the Presentation Server.
When I login into presentation server as say "Administrator", the PS passes the username/password of "Administrator" instead of the username and password setup in the connection pool.
The error is;
-------------------- Query Status: Query Failed: [nQSError: 16001] ODBC error state: HY000 code: 108 message: Password authentication failed for user 'ADMINISTRATOR'.
When I create a user with the same username and password as the one used in the connection pool, the requests work. Although thisd lets me work at the moment, it is not a viable solution going forward.
Please can you advise what I need to setup for this to work correctly for me ie., make PS substitute the correct username password when connecting to the ODBC defined in the connection pool?
Thanks in advance.
Danish.

Apologies if I've misunderstood, but are you trying to implement anything than standard practise, namely:
1) Using the OBIEE security model to authenticate and log in (i.e. when you log in to Answers you are entering a username as defined in the RPD)
2) Using a fixed username & password as defined on the database to authenticate & authorise when you read data for your reports?
If you use BYPASS_NQS then BI Server will take your login details when you login to Answers (Presentation Server) and pass them through to the database and see if they're valid. This is what's happening when you got the error that you initially posted. With setting at BYPASS_NQS try logging into Answers with the database username&password, I bet it will work.
If you use NQS (the default) then it checks the Answers login against users defined in the RPD, so the reason you couldn't login when you changed it to NQS is that the user/pw you logged in with didn't match what's defined in the RPD.
Try this:
1. Create a new user & pw in the RPD, for argument's sake call it TestRPDUser with the same pw
2. Set authentication to NQS and restart you BI Server
3. Log in to Answers as TestRPDUser - does it work?

SSH local database username and password not working

I have a weird issue. I recently setup an ASA 5510 and had SSH working. To make it easier on my VPN users I then decided I wanted to setup a Windows 2008 Network Policy Server for RADIUS authentication. Ever since I added the RADIUS part to aaa authentication, when I use SSH to connect to the ASA it will not take the local user name and password I have setup. I can however get in using a Domain user name and password. Below is the SSH and AAA configuration. Am I missing something here? The username and password in the ASA is not on the domain and it's like the ASA is not even trying LOCAL when it tries to authenticate. I want it to use the local username and password if possible. I'm kind of new to ASA's..
On another note, I have never been able to SSH in on the internal interface. I always get a "The remote system refused the connection" error message. I can only use the outside interface.
Site-ASA# sh run | in ssh
aaa authentication ssh console SERVER_RADIUS LOCAL
ssh 0.0.0.0 0.0.0.0 outside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 60
ssh version 2
Site-ASA# sh run | in aaa
aaa-server SERVER_RADIUS protocol radius
aaa-server SERVER_RADIUS (inside) host 10.0.0.6
aaa authentication ssh console SERVER_RADIUS LOCAL
aaa authentication http console SERVER_RADIUS LOCAL
Site-ASA#
If there are any other config that would help I would be more than happy to display them
Thanks!

Thanks for the reply. I was just coming in to update this because you are exactly correct. For some reason I kept thinking that if the authentication failed via RADIUS it would use local which is not the case.
Problem (or no problem) resolved.

Username and password for 8i lite

I'm running Oracle 8i Lite on NT 4.0. I've just installed 8i Lite and it asks for username and password. Anyone knows if it takes any default username and password? I was using the same username and password that I use to log into OTN web site, but it didn't work.
null

Oracle Lite has a default user called
SYSTEM
with no password at all - but the tools
delivered oracle lite need a password
string, so anything is ok as password.
E.G. when using SQL*Plus, use the following
connect string:
system/dummy@odbc:polite
or in the GUI sql*plus, enter "system" for the user, "dummy" for the password and "odbc:polite" for the database/service name.
null

Username and Password Required for Wifi Connection, Not Being Asked for Username

Similar Messages

Maybe you are looking for