Username login fail
It seems everything is up and all troubleshooting points to reset username. My BT report shows login failed. Online when I check line status it says "it looks like a BT hub is not connected" yet it is... Please help.
Information for Helpdesk agents
When contacting the BT Broadband helpdesk, the agent might ask you for details about your BT Home Hub. This page contains all of the information they are likely to request.
1. Product name: BT Home Hub
2. Serial number: +068343+NQ44113649
3. Firmware version: Software version 4.7.5.1.83.8.173.1.6 (Type A) Last updated Unknown
4. Board version: BT Hub 5A
5. WAN: PPP Disconnected (Login Failed)
6. Data sent/received: 0.1 MB / 0.1 MB
7. Broadband username: [email protected]
8. BT Wi-fi: No
9. 2.4 GHz Wireless network/SSID: BTHub5-MC7P
10. 2.4 GHz Wireless connections: Enabled (802.11 b/g/n (up to 150 Mb/s)) 20 MHz, WPS enabled
11. 2.4 GHz Wireless security: WPA2
12. 2.4 GHz Wireless channel: Automatic (Smart Wireless)
13. 2.4 GHz Wireless network/SSID:
14. 2.4 GHz Wireless connections: Disabled
15. 2.4 GHz Wireless security: None
16. 2.4 GHz Wireless channel: Automatic (Smart Wireless)
17. 2.4 GHz Wireless network/SSID: BTWifi-with-FON
18. 2.4 GHz Wireless connections: Disabled
19. 2.4 GHz Wireless security: None
20. 2.4 GHz Wireless channel: Automatic (Smart Wireless)
21. 2.4 GHz Wireless network/SSID: Auto-BTWiFi
22. 2.4 GHz Wireless connections: Disabled
23. 2.4 GHz Wireless security: None
24. 2.4 GHz Wireless channel: Automatic (Smart Wireless)
25. 2.4 GHz Wireless network/SSID:
26. 2.4 GHz Wireless connections: Disabled
27. 2.4 GHz Wireless security: None
28. 2.4 GHz Wireless channel: Automatic (Smart Wireless)
29. 5 GHz Wireless network/SSID: BTHub5-MC7P
30. 5 GHz Wireless connections: Enabled (802.11 a/n/ac (up to 1300 Mb/s)) 80 MHz, WPS enabled
31. 5 GHz Wireless security: WPA2
32. 5 GHz Wireless channel: Automatic (Smart Wireless)
33. 5 GHz Wireless network/SSID:
34. 5 GHz Wireless connections: Disabled
35. 5 GHz Wireless security: None
36. 5 GHz Wireless channel: Automatic (Smart Wireless)
37. 5 GHz Wireless network/SSID: BTWifi-with-FON
38. 5 GHz Wireless connections: Disabled
39. 5 GHz Wireless security: None
40. 5 GHz Wireless channel: Automatic (Smart Wireless)
41. 5 GHz Wireless network/SSID: Auto-BTWiFi
42. 5 GHz Wireless connections: Disabled
43. 5 GHz Wireless security: None
44. 5 GHz Wireless channel: Automatic (Smart Wireless)
45. 5 GHz Wireless network/SSID:
46. 5 GHz Wireless connections: Disabled
47. 5 GHz Wireless security: None
48. 5 GHz Wireless channel: Automatic (Smart Wireless)
49. Firewall: Default
50. MAC Address: d0:84:b0:da:1c:e0
51. Software variant: -
52. Boot loader: -
Similar Messages
-
I have 1 user on a Mac who just started having a pop up message when opening entourage "The server for my email acount returned the error "Login Failed".
Your username/password or security settings may be incorrect. Would
you like to try re-entering your password?" I know the settings are right because the users mail works on iPhone,iPad,an windows machine. I have deleted entourage plist and also tried a new user same message appears in new user.See thread here:
https://discussions.apple.com/message/23175721#23175721
It worked for me. -
outlook stopped syncing with iCloud - All of the sudden (6/12) outlook stopped syncing saying my username/password failed to authenticate. I didn't change anything. Can login to iCloud via safari
outlook stopped syncing with iCloud - All of the sudden (6/12) outlook stopped syncing saying my username/password failed to authenticate. I didn't change anything. Can login to iCloud via safari
-
SSL VPN, "Login failed" and "WebVPN: error creating WebVPN session!"
Hi,
Just ran the wizard for Anyconnect SSL VPN, created a tunnel group, a vpn pool and added user to it. When trying to logon on the SSL service, it simply says "login failed". I suspect that the user might not be in correct groups or so?
some relevant config
webvpn
enable wan
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable
group-policy vpnpolicy1 internal
group-policy vpnpolicy1 attributes
vpn-tunnel-protocol svc
tunnel-group admins type remote-access
tunnel-group admins general-attributes
address-pool sslpool2
default-group-policy vpnpolicy1
username myuser password 1234567890 encrypted privilege 15
username myuser attributes
vpn-group-policy vpnpolicy1
Debug:
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-867034168) and nh (-849922864)!
webvpn_add_auth_handle: auth_handle = 17
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
webvpn_session.c:http_webvpn_create_session[184]
WebVPN: error creating WebVPN session!
webvpn_remove_auth_handle: auth_handle = 17
webvpn_free_auth_struct: net_handle = CD5734D0
webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_free_auth_struct: net_handle = CD5734D0AnyConnect says:
"The secure gateway has rejected the agents VPN connect or reconnect request. A new connection requires re-authentication and must be started manually. Please contact your network administrator if this problem persists.
The following message was received from the secure gateway: Host or network is 0"
Other resources indicate that it's either the tunnel group, or the address pool.. The address pool is:
ip local pool sslpool2 172.16.20.0-172.16.20.254 mask 255.255.255.0
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# debug http 255
debug http enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-845538720) and nh (-828624376)!
webvpn_add_auth_handle: auth_handle = 22
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
HTTP: net_handle->standalone_client [0]
webvpn_session.c:http_webvpn_create_session[184]
webvpn_session.c:http_webvpn_find_session[159]
WebVPN session created!
webvpn_session.c:http_webvpn_find_session[159]
webvpn_remove_auth_handle: auth_handle = 22
webvpn_portal.c:ewaFormServe_webvpn_cookie[1805]
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
HTTP: Periodic admin session check (idle-timeout = 1200, session-timeout = 0)
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CC894AA8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
Close 1043041832
webvpn_free_auth_struct: net_handle = CC894AA8 -
I created second email account ([email protected]) with a Password but when I try to get mail and enter password, it says "Sending of Password did not succeed. Mail server mail.comcast.net responded: login failed". What am I doing wrong?
Have you logged on to the webmail account using a browser and enabled either Pop or Imap forwarding for that email address?
Have you created a mail account in Thunderbird that uses the chosen webmail forwarding option?
Password - make sure caps lock is not switched - it must be the same password you use to access the webmail account.
check:
Tools > account Settings > Server Settings
username = full email address
Please post info:
In Thunderbird
Help > Troubleshooting information
click on 'copy text to clipboard'
paste info in this question
edit /remove all info on fonts and printers. -
Hello Community
Edit My Profile in My Site displayed an error that "An unexpected error occurred" with a
Correlation ID. I have tried to read the logs in the 14 hive Logs folder but unsuccessfully.
I was able to understand Event Viewer logs, there was supposed to be 4 possibilities
one was wheter UPS was running, the other was clearing the cache and the other 2 I also fixed
I even recreated the Search Service Application, Metadata and UPS but when I fixed the problems
the error still occurred.
Then I used a Powershell command that displayed output but the Output doesn't make sense
because it is saying the login failed associated with the database that was created by the Search
Service application when it was created.
But how can that username be related to the Search Service database? Below is the output:
Area : SharePoint Foundation
Category : Logging Correlation Data
Level : Medium
EventID : xmnv
Message : Name=Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)
Area : SharePoint Foundation
Category : Logging Correlation Data
Level : Medium
EventID : xmnv
Message : Site=/
Area : SharePoint Server
Category : Database
Level : High
EventID : 880i
Message : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
equested by the login. The login failed. Login failed for user Server1\User1. at System.Data.SqlCli
ent.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlCli
ent.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser
.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkC
opyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLog
in(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo server
Info, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) a
t System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean re
directedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnecti
onString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient
.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Ob
ject providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at Sy
stem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvi
derInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionF
actory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions opti
ons) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.
Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderB
ase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFa
ctory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenCo
nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.S
qlConnection.Open() at Microsoft.Office.Server.Data.SqlSession.OpenConnection()
Area : SharePoint Server
Category : Database
Level : High
EventID : 880k
Message : at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQu
eryData monitoringData, Boolean retryForDeadLock) at Microsoft.Office.Server.Data.SqlSession.ExecuteRead
er(SqlCommand command, Boolean retryForDeadLock) at Microsoft.Office.Server.Search.Administration.Schema
Database.GetSchemaHighLevelInfo() at Microsoft.Office.Server.Search.Administration.Schema.get_LastChange
Time() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyM
appings(Guid partitionID, SearchServiceApplicationProxy searchAppProxy) at Microsoft.Office.Server.Admin
istration.UserProfileApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName) a
t Microsoft.Office.Server.UserProfiles.Co...
Area : SharePoint Server
Category : Database
Level : High
EventID : 880j
Message : SqlError: 'Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" requested by the login. Th
e login failed.' Source: '.Net SqlClient Data Provider' Number: 4060 State: 1 Class: 11 Procedure: '' Lin
eNumber: 65536 Server: Server1\Servers
Area : SharePoint Server
Category : Database
Level : High
EventID : 880j
Message : SqlError: 'Login failed for user Server1\User1.' Source: '.Net SqlClient Data Provider' Number: 18456
State: 1 Class: 14 Procedure: '' LineNumber: 65536 Server: Server1\Servers
Area : SharePoint Server
Category : Database
Level : High
EventID : tzku
Message : ConnectionString: 'Data Source=Server1\Servers;Initial Catalog=SrchSvc_DB_5e06e8c82d5446e39da18d70a5a
7e78e;Integrated Security=True;Enlist=False;Connect Timeout=15' ConnectionState: Closed ConnectionTimeout
: 15
Area : SharePoint Foundation
Category : Runtime
Level : Unexpected
EventID : tkau
Message : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
equested by the login. The login failed. Login failed for user Server1\User1. at System.Data.SqlClie
nt.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClie
nt.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.
Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCo
pyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogi
n(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverI
nfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean red
irectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectio
nString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.
SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Obj
ect providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at Sys
tem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvid
erInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFa
ctory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions optio
ns) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.D
ata.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBa
se.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFac
tory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenCon
nection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.Sq
lConnection.Open() at Microsoft.Office.Server.Data.SqlSession.OpenConnection() at Microsoft.Office.S
erver.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringDat
a, Boolean retryForDeadLock) at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command
, Boolean retryForDeadLock) at Microsoft.Office.Server.Search.Administration.SchemaDatabase.GetSchemaHig
hLevelInfo() at Microsoft.Office.Server.Search.Administration.Schema.get_LastChangeTime() at Microso
ft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyMappings(Guid partitio
nID, SearchServiceApplicationProxy searchAppProxy) at Microsoft.Office.Server.Administration.UserProfile
ApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName) at Microsoft.Office.Se
rver.UserProfiles.CoreProperty.GetManagedPropertyMapping(String propertyName) at Microsoft.Office.Server
.UserProfiles.CoreProperty.get_ManagedPropertyName() at Microsoft.SharePoint.Portal.WebControls.ProfileP
ropertyLoader.ApplyFormattingEx(ProfileManagerBase objManager, Dictionary`2 highlightedProperties, Property
prop, Object[] propValue, Boolean ignoreFormat, Boolean allowLinkToSearch) at Microsoft.SharePoint.Porta
l.WebControls.ProfileUI.LoadProfileTable() at Microsoft.SharePoint.Portal.WebControls.ProfileUI.LoadCont
rol(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.
Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control
.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.U
I.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint
, Boolean includeStagesAfterAsyncPoint)
Area : SharePoint Foundation
Category : Monitoring
Level : Medium
EventID : b4ly
Message : Leaving Monitored Scope (Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)). Execution Time=88.6628049095625
What does that username have to do with the database created by Search Service Application creation
and why can't I "Edit my profile" in My Profile?
Thank you
ShabeautUse Netmon to analyze the traffic and understand more on same
Check available DISK SPACE on SharePoint Servers and SQL Server. On SQL Instance especially check if any databases have set Size limits.
Did we modify something on EditProfile.aspx page. Any custom solution deployed related to search
or mysite
http://blogs.msmvps.com/brianmadsen/2011/12/06/sharepoint-2010-connectiontimeout-issues-from-wfe-to-profile-db/
add the SQL Server details into the hosts file on the WFE server.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/7efeefce-129e-4a03-9ff7-900d6168952b/moss-event-id-3351-login-failed-for-user-nt-authorityanonymous-logon?forum=sharepointadminlegacy
Running Windows sharepoint services vss writer service under AD farm account (instead of Local system) is the solution of my issue!
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ca7d53d8-88e2-4a82-9978-8695a7074e5d/application-pool-identity-does-not-have-access-to-profiledb?forum=sharepointadminprevious
If this helped you resolve your issue, please mark it Answered -
Reports successfully execute but generate a login failed for user 'sa' err
I am running Crystal Reports Server XI R2. Classic ASP is used to generate embedded reports within our application. The crystal reports use ODBC to connect to a SQL Server 2005 database. The reports successfully generate in our Classic ASP application. However in SQL Server 2005, the following error messages are being generated each time a crystal report is ran:
- Login failed for user 'sa'.
- Error: 18456, Severity: 14, State: 8.
We know that we are passing the correct username/password to the crystal reports, becuase they execute successfully.
It appears that when the report is called, Crystal Reports appears to conect to SQL Server using a username/password that we didn't provide it at execution time, this fails and the SQL Server 'login failed for user' is generated. Then it runs the report using the username/password we provide and it successfully generates a report.
I have ran Profiler against the SQL Server Database and the 'Login failed for user 'sa' ' errors have a ApplicationName of either 'Seagate Crystal Reports' or 'Crystal Reports'. Therefore I know it is Crystal Reports generating these errors in SQL Server.
Does anyone have any ideas on how to stop these SQL Server 'Login failed for user 'sa' ' errors being generated?What happens if you use Profiler when running the report using Crystal Report Designer?
If the report is ran through Crystal Report Designer, NO 'Login failed for user' error messages appear in profiler. Everything looks ok when ran in Designer.
Also, need to know what patch level you are on?
We are running Crystal Reports Server XI Release 2, Version: 11.5.8.8265
No additional patchs have been applied since Crystal Reports Server was installed.
We may try the SA account if one of the connections fail to log on with the credentials you provided. Verify the user you logged on with has rights to all tables.
The reports were running through our application using the SA account. The SA account has permissions to these tables. The reports do generate results and appear perfectly fine in the application. The issue is that when our application requests the report from Crystal Reports Server. Crystal Reports Server delivers the correct report to our application. However during the process to generate the report, 'login failed for user 'sa' ' errors are being generated in SQL Server 2005.
Also, I have tried creating a completely new SQL user called 'crystaluser'. I ran the report using Crystal Report Designer and used the crystaluser logon and saved the report. Then I ran the same report through our application. SQL Profiler will then display 'login failed for user 'crystaluser''.
Its seems as though Crystal Reports Server is first executing the report using the default SQL user saved with the report, but is either sending a blank password or no password at all. This generates the 'login failed for user' in SQL Server 2005. But it then uses the SQL username/password my application gives it and successfully generates the report. Of course this is only speculation. -
Sql Server 2012 Login Failed for user "NT Authority\System"
I have installed SQL Server on a new server. I have been getting the following error on each of the database in it.
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'ABC'. [CLIENT: xxx.xxx.xxx.xxx]
Here is some information on the instance:
1) Default instance
2) SQL Server, Sql Server Agent, Sql Server Reporting services are running / log on using a domain service account.
3) Sql Server Browser is disabled.
4) SQL Server VSS Writer is running / log on as Local Service.
5) NT AUTHORITY\SYSTEM does exists in Login with just public server roles.
I ran a trace on login failed and I get:
ApplicationName: Microsoft Windows Script Host
and it runs every 15 minutes.
Help please?Hi,
The error was thrown when the SCOM components connected to the backend SCOM databases.
You can specify a domain account, grant it the sysadmin role and the error should be gone.
Also, see the replies in your previous thread:
http://social.technet.microsoft.com/Forums/en-US/23f6b6cb-ec41-4117-8613-26d24c948827/login-failed-for-user-username-reason-failed-to-open-the-explicitly-specified-database
Thanks.
Tracy Cai
TechNet Community Support -
Unhandled Exception Error - Login Failed for User
Hello,
I am receiving an error when I run my application stating “Unhandled exception has occurred. If you click continue, the application will ignore the error………..Login failed for MyUser.
When I click the Continue button the application runs and seems to work properly. This application used to run without receiving the error and I did not make any changes. I have another application that is using basically the exact same code and does not
receive the error. The only difference is the application is querying a different DB but using the exact same connection string. The error only occurs when I run the exe file created from the build. When I run (debug) the application from within the VS 2013
IDE I do not receive the error.
Here are the details to the error message:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Data.OleDb.OleDbException (0x80040E4D): Login failed for user 'jobrunner'.
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
at LoanOrig_FDIC_Codes.DataSet1TableAdapters.I_LoansTableAdapter.Fill(I_LoansDataTable dataTable) in u:\Visual Studio Projects\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\DataSet1.Designer.cs:line 1668
at LoanOrig_FDIC_Codes.Form1.Form1_Load_1(Object sender, EventArgs e) in u:\Visual Studio Projects\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\Form1.cs:line 152
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
LoanOrig_FDIC_Codes
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///U:/Visual%20Studio%20Projects/LoanOrig_FDIC_Codes/LoanOrig_FDIC_Codes/LoanOrig_FDIC_Codes/bin/Debug/LoanOrig_FDIC_Codes.exe
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34238 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
System.Data.DataSetExtensions
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Data.DataSetExtensions/v4.0_4.0.0.0__b77a5c561934e089/System.Data.DataSetExtensions.dll
System.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
System.Transactions
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
I'm not sure what the JIT debugger is but to my knowledge my other apps are not using that. The production username and password are correct in the connection string so I'm not clear why I am receiving this error especially since I'm not receiving the
error on my other application. I have also attached the code just in case it is needed. Any assistance will be greatly appreciated. Thank you.
Dave
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using ClosedXML.Excel;
using DocumentFormat.OpenXml;
using System.IO;
namespace LoanOrig_FDIC_Codes
public partial class Form1 : Form
SqlCommand sqlCmd;
SqlDataAdapter sqlDA;
DataSet sqlDS;
DataTable sqlDT;
SqlCommand sqlCmdCnt;
public Form1()
InitializeComponent();
//BEGIN BUTTON LOAD CLICK EVENT
private void btnLoad_Click(object sender, EventArgs e)
string sqlCon = "Data Source=FS-12345; Initial Catalog=ExtractGenerator; User ID=MyUser; Password=MyPW";
//Set the 2 dateTimePickers to today's date
DateTime @endDate = End_dateTimePicker.Value.Date;
DateTime @startDate = Start_dateTimePicker.Value.Date;
//Validate the values of the 2 dateTimePickers
if (endDate < startDate)
MessageBox.Show("End Date must be greater than or equal to the Start Date OR Start Date must be less than or equal to the End Date ", "Incorrect Date Selection",MessageBoxButtons.OK,MessageBoxIcon.Error);
//Reset both dateTimePickers to todays date
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
return;
//End of date validation
string sqlData = @"SELECT AcctNbr,
CurrAcctStatCD,
Org,
MJAcctTypCD,
MIAcctTypCD,
NoteOriginalBalance,
ContractDate,
FDICCATCD,
FDICCATDESC,
PropType,
PropTypeDesc
FROM I_Loans
WHERE CAST(ContractDate AS datetime) BETWEEN @startdate AND @enddate ORDER BY ContractDate";
SqlConnection connection = new SqlConnection(sqlCon);
SqlCommand sqlCmd = new SqlCommand(sqlData, connection);
sqlCmd.Parameters.AddWithValue("@startDate", startDate);
sqlCmd.Parameters.AddWithValue("@endDate", endDate);
sqlDS = new DataSet();
sqlDA = new SqlDataAdapter(sqlCmd); //SqlAdapter acts as a bridge between the DataSet and SQL Server for retrieving the data
connection.Open();
sqlDA.SelectCommand = sqlCmd; //SqlAdapter uses the SelectCommand property to get the SQL statement used to retrieve the records from the table
sqlDA.Fill(sqlDS, "I_Loans"); //SqlAdapter uses the "Fill" method so that the DataSet will match the data in the SQL table
sqlDT = sqlDS.Tables["I_Loans"];
//Code section to get record count
sqlCmdCnt = connection.CreateCommand();
sqlCmdCnt.CommandText = "SELECT COUNT(AcctNbr) AS myCnt FROM I_Loans WHERE ContractDate BETWEEN @startDate AND @endDate";
sqlCmdCnt.Parameters.AddWithValue("@startDate", startDate);
sqlCmdCnt.Parameters.AddWithValue("@endDate", endDate);
int recCnt = (int)sqlCmdCnt.ExecuteScalar();
txtRecCnt.Text = recCnt.ToString();
btnExport.Enabled = true;
//End of code section for record count
connection.Close();
dataGridView1.DataSource = sqlDS.Tables["I_Loans"];
dataGridView1.ReadOnly = true;
//Reset both dateTimePickers to todays date
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
//END BUTTON LOAD CLICK EVENT
//BEGIN BUTTON EXPORT CLICK EVENT
private void btnExport_Click(object sender, EventArgs e)
SaveFileDialog saveFD = new SaveFileDialog();
{ //ClosedXML code to export datagrid result set to Excel
string dirInfo = Path.GetPathRoot(@"\\FS-03250\users\dyoung\LoanOrig_FDIC_Codes");
if (Directory.Exists(dirInfo))
var wb = new XLWorkbook();
var ws = wb.Worksheets.Add(sqlDT);
ws.Tables.First().ShowAutoFilter = false;
//SaveFileDialog saveFD = new SaveFileDialog(); //I moved this variable to the top of the btnExport code block so that the variable will be available thru the entire scope of that code block
saveFD.Title = "Save As";
saveFD.Filter = "Excel File (*.xlsx)| *.xlsx";
saveFD.FileName = "LoanOrig_FDIC_Codes_" + DateTime.Now.ToString("yyyy-MM-dd");
if (saveFD.ShowDialog() == System.Windows.Forms.DialogResult.OK)
Stream stream = saveFD.OpenFile();
wb.SaveAs(stream);
stream.Close();
else if (saveFD.ShowDialog() == System.Windows.Forms.DialogResult.Cancel)
MessageBox.Show("Save file operation has been canceled", "Save As Canceled", MessageBoxButtons.OK, MessageBoxIcon.Stop);
return;
//End of ClosedXML code
MessageBox.Show("File has been exported to " + saveFD.FileName, "File Exported", MessageBoxButtons.OK, MessageBoxIcon.Information);
//MessageBox.Show("File has been exported to U:\\LoanOrig_FDIC_Codes", "File Exported", MessageBoxButtons.OK, MessageBoxIcon.Information);
else
MessageBox.Show("Drive " + saveFD.FileName + " " + "not found, not accessible, or you may have invalid permissions");
//MessageBox.Show("Drive " + "U:\\Visual Studio Projects\\LoanOrig_FDIC_Codes" + " " + "not found, not accessible, or you may have invalid permissions");
return;
//END THE SAVE AS PROCESS
//END BUTTON EXPORT CLICK EVENT
private void Form1_Load(object sender, EventArgs e)
//Set dates to be today's date when the form is openend
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
private void Form1_Load_1(object sender, EventArgs e)
// TODO: This line of code loads data into the 'dataSet1.I_Loans' table. You can move, or remove it, as needed.
this.i_LoansTableAdapter.Fill(this.dataSet1.I_Loans);
private void iLoansBindingSource_CurrentChanged(object sender, EventArgs e)
private void btnExit_Click(object sender, EventArgs e)
this.Close();
David YoungIn SQL you have a login which allows access to the server but you must also have permissions to access each database that you will use (including Master). So I would verify that your user also has the necessary permissions on the database itself and
not just the SQL instance. The error you're getting is from SQL saying that the user doesn't have permissions. If it works for 1 DB but not the other on the same SQL instance then it is likely a missing permission on the DB itself.
I should note that you have a hard coded conn string in your code but the error is for a different user. I'm assuming that you simply posted it there for convenience and that you changed the values to obscure the data. If you are actually getting
the info from your config file then verify the connection string is correct. Also be sure to not use Integrated Security since it appears that you are using SQL authentication. -
Hi,
We have exadata x3-2. I am seeing this error in alert log file frequently.
The db version: 11.2.0.3 On RAC on Linux 5.8 x86-64Bit
Errors in file /d01/oracle/TEST/11.2.0/admin/TEST1_dbtest/diag/rdbms/prod/TEST1/trace/TEST1_reco_11909.trc:
ORA-01017: invalid username/password; logon denied
[Oracle][ODBC SQL Server Wire Protocol driver][SQL Server]Login failed for user 'RECOVER'. {28000,NativeErr = 18456}
ORA-02063: preceding 2 lines from HIS_CUST
The file /d01/oracle/TEST/11.2.0/admin/TEST1_dbtest/diag/rdbms/prod/TEST1/trace/TEST1_reco_11909.trc
Contains many repeated lines like below
*** 2015-01-21 06:34:40.209
ERROR, tran=21.24.51311, session#=1, ose=0:
ORA-01017: invalid username/password; logon denied
[Oracle][ODBC SQL Server Wire Protocol driver][SQL Server]Login failed for user 'RECOVER'. {28000,NativeErr = 18456}
ORA-02063: preceding 2 lines from HIS_CUST
Could any please help why is this happening.
ThanksHi,
You have customers who are running distributed transactions using a gateway which need to be rolled back. However, the gateway has not been correctly configured for distributed transactions. To roll back a transaction on the SQL*Server database a connection is made as the user defined in the parameter HS_FDS_RECOVERY_ACCOUNT in the gateway init<sid>.ora file but this user has not been created in the SQL*Server database with the password defined in HS_FDS_RECOVERY_PWD. This user also needs to own the transaction log table.
I assume you are using the Database Gateway for SQL*Server (DG4MSQL) as the Database Gateway for ODBC (DG4ODBC) doesn't support distributed transaction.
If you have access to My Oracle Support have a look at this note -
How to Setup DG4MSQL to Use Distributed Transactions (Doc ID 227011.1)
Otherwise, check the Gateway documentation.
Regards,
Mike -
We need to run some checks against our business rules at login
time so I have written a custom login page which calls a custom
procedure. The procedure determines how much access the user is
entitled to and sets the users group memmbership accordingly.
Finally I call the Portal login procedure with the username and
password that the user provided:
portal30.wwptl_login.login_url(USERNAME,
PASSWORD,
OK_URL,
cancel_URL);
This works ok if the user has typed in a valid username +
password. But if the Portal login fails the user gets thrown to
the Single Sign-On screen. If the user now fixes his typo and
log in again he/she bypasses the whole custom login procedure...
The only way I can think of right now is to change the Single
Sign-On screen, which I know is possible. But that will apply to
the whole Portal installation and we do need several different
custom login's, similar to the one outlined above. So we would
have to change the Single Sign-On screen just have some text
telling the user to login using one of the official login pages.
Not very nice - but a possible solution.
It would be nice if you could specify a URL to the login
procedure for the case of a failed login. Is this something that
is being concidered for future versions of Portal?
Hmmm.. in case a user bookmarks a page that is not public he/she
will still be taken to the Single Sign-On page to login. Guess
we have to change the Single Sign-On screen after all..
Any other ideas?You should develop customized login page according to the
specification provided in the SSO Server administrator guideHello
Where can i find the SSO Server administrator guide ??
Thanks
ERIC -
I am getting the below error in SQl server error log for every 15 min. I ran profiler to find out what database it is trying to access, found that it is trying to access master.
I am getting this error because I removed NT AUTHORITY\SYSTEM from SYSADMIN group because all my SQl server services are running with domain account and i don't want to give SYSADMIN for that account, is there any way that we can eliminate the error.
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database. [CLIENT: xx.xx.xx.xx]
Error: 18456, Severity: 14, State: 38.Hi,
The error message is thrown out since the login has insufficient privilege. In this case, the NT AUTHORITY\SYSTEM has not sysadmin privileges because it is moved the permission.
I agree with Shanky. You need to address Microsoft Monitoring Agent issue first. You can get the help from System Center Operations Manager forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=operationsmanagergeneral
Reference:
http://social.technet.microsoft.com/Forums/en-US/23f6b6cb-ec41-4117-8613-26d24c948827/login-failed-for-user-username-reason-failed-to-open-the-explicitly-specified-database
Hope it helps.
Tracy Cai
TechNet Community Support -
Server Error In '/' Application - Login failed for user xyz ...
Hi, I'm brand new here
I would be ever grateful for help on this. It's probably something simple.
I'm coding a website in C# ASP.NET (http://project.arcza.net). There is a registration page where you send your email, username all that stuff to an SQL server. The SQL server runs on my IIS server too. On Visual Studio, I can debug the website (i.e. launch
it on localhost:12345) and I get a fully working website that I can register as a user and it injects into the SQL server's table. If I query the SQL server, I see the results. So it works fine here.
The problem: if I copy the files for the website into the live IIS directory (as opposed from the Visual Studio preview environment) I get a runtime error thing, I have no idea what this means. The live IIS folder is project.arcza.net and I have disabled
security so you can see the full workings of the probem.
It says login failed for user 'pap'. Pap is a user I have added in SQL server, with username pap and password pap. The credentials are correct. I have added a 'connection string' (I have very little idea what this is) with thees credentials for an SQL server
@ localhost, in IIS manager.
Thank you and if you have any idea I'd be very happy.
I should also point out that if I edit properties of pap in SQL server's login thing where it lists the accounts, I cannot save the settings (you know the ones where you give it permissions to access, delete, etc?) I can tick them and click okay but if I
reoped properties and click on (I think off the top of my head it's called 'securities' but I may be wrong, it's 2nd from the bottom of the pane on the left) I see the tickboxes remain unticked. Could this have something to do with the "login failed for
'pap'" message I'm seeing?Have a look at
Errorlog. you should get reason of login failed for user.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
1 Login: FAIL (hr = 0x1) Error When Logging In Lync 2013 Client
We have just upgraded our Lync server from 2010 to 2013. We were able to migrate our users successfully, but there I cannot login to the new server through the client. My account is the only account with this problem. Here is the error I received during
login:
1 Login: FAIL (hr = 0x1)
Changed CBootstrapper status [10000] -> [10006]
1.1 Lync-autodiscovery: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://xxxxxx003.xxxxx.xxxx/WebTicket/WebTicketService.svc
1.1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x0000000005BCF4A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:uri=xxxxx@xxxxx:specific:LAD:1
1.1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Discovery request sent to URL https://xxxxxx003.xxxxx.xxxx/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=xxxxxx?sipuri=xxxxxx@xxxxx, txn (000000000A741940), task(0000000007613660)
1.1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=000000000DDEA330,
context: WebRequest context@ :231705840
MethodType:4
ExecutionComplete? :1
Callback@ :000000000DDDE848
AsyncHResult:80f10041
TargetUri:https://xxxxxx003.xxxxx.xxxx/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://xxxxxx003.xxxxx.xxxx/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Created CManagedCredential[SPECIFIC this=000000000DCFC1E0, domain=, userName=]
1.1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=000000000DDEA330,
context: WebRequest context@ :231705840
MethodType:4
ExecutionComplete? :1
Callback@ :000000000DDDE848
AsyncHResult:80f10041
TargetUri:https://xxxxxx003.xxxxx.xxxx/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://xxxxxx003.xxxxx.xxxx/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Created CManagedCredential[SPECIFIC this=000000000DCFB4C0, domain=, userName=]
1.1.1.7 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=000000000DDEA330,
context: WebRequest context@ :231705840
MethodType:4
ExecutionComplete? :1
Callback@ :000000000DDDE848
AsyncHResult:80f10041
TargetUri:https://xxxxxx003.xxxxx.xxxx/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://xxxxxx003.xxxxx.xxxx/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.1.8 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Created CManagedCredential[SPECIFIC this=000000000DCFBA00, domain=snl, userName=]
1.1.1.9 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=000000000DDEA330,
context: WebRequest context@ :231705840
MethodType:4
ExecutionComplete? :1
Callback@ :000000000DDDE848
AsyncHResult:80f10041
TargetUri:https://xxxxxx003.xxxxx.xxxx/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://xxxxxx003.xxxxx.xxxx/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.1.10 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x0000000005BCF4A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:uri=xxxxxxx@xxxxxx:specific:LAD:1
Any help would be highly appreciated.09/30/2014|09:25:48.758 1C94:728 INFO :: ********************************************************************************
####### module=UccApi flavor=fre version=15.0.4615.1000 ######
09/30/2014|09:25:48.758 1C94:728 INFO :: Initialization flags (100)
09/30/2014|09:25:49.012 1C94:728 TRACE :: CUccMediaManagerEventAdapter::Initialize Start Initialize message handler(...)
09/30/2014|09:25:49.012 1C94:728 TRACE :: CUccMediaManagerEventAdapter::Initialize End Initialize message handler(...)
09/30/2014|09:25:49.015 1C94:728 ERROR :: CHidManager::AddHidDevice - CreateFile(\\?\hid#vid_046d&pid_c077#6&2f119d73&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}) failed with 0x80070005
09/30/2014|09:25:49.015 1C94:728 ERROR :: CHidManager::EnumerateHidDevices - AddHidDevice failed 0x80070005
09/30/2014|09:25:49.015 1C94:728 ERROR :: CHidManager::AddHidDevice - CreateFile(\\?\hid#vid_413c&pid_2003#6&27f51e51&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}) failed with 0x80070005
09/30/2014|09:25:49.015 1C94:728 ERROR :: CHidManager::EnumerateHidDevices - AddHidDevice failed 0x80070005
09/30/2014|09:25:49.015 1C94:728 INFO :: MediaManager found 0 devices
09/30/2014|09:25:49.015 1C94:728 ERROR :: CUccMediaDeviceManager::LoadCustomTelephonyDeviceCollection: HRESULT failed: 80070002 = hr. Audio capture
09/30/2014|09:25:49.015 1C94:728 ERROR :: CUccMediaDeviceManager::LoadCustomTelephonyDeviceCollection: HRESULT failed: 80070002 = hr. Audio capture
09/30/2014|09:25:49.015 1C94:728 WARN :: We did not find device based on Name and Moniker match. Let's try to find device based on only name match
09/30/2014|09:25:49.015 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.015 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.015 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.015 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.015 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.015 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.015 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.015 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.015 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.015 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.015 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.015 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.029 1C94:728 TRACE :: SipStackGlobalInit - Doing WSAStatusup(1,1)
09/30/2014|09:25:49.029 1C94:728 TRACE :: SipStackGlobalInit - WsaData fields: wsaVersion=1.1(0x101), wVersion=1.1(0x101), wHighVersion=2.2(0x202)
09/30/2014|09:25:49.029 1C94:728 INFO :: ProxyMessageHandler::Initialize: ProxyMessageHandler Initialized
09/30/2014|09:25:49.029 1C94:728 TRACE :: client[00000000055DC890] new sipStack[00000000073EB810]
09/30/2014|09:25:49.036 1C94:728 INFO :: SIP_STACK::QueryPlatformAuthCaps ProtocolsFromPlatform=0x2f
09/30/2014|09:25:49.037 1C94:728 WARN :: CUccPlatform::EnableTracing: tracing is already enabled
09/30/2014|09:25:49.106 1C94:728 INFO :: Crop=2
09/30/2014|09:25:49.366 1C94:2140 INFO :: IMediaPlatformNotify::DevicePnpEvent(), DeviceAdded: 1, MediaDevice: 00000000055F8210, MediaType: 65536, MediaDirection 1, Description: Rear Input (SoundMAX Integrated Digital High Definition Audio)
09/30/2014|09:25:49.366 1C94:2140 INFO :: IMediaPlatformNotify::DevicePnpEvent(), DeviceAdded: 1, MediaDevice: 00000000055F8090, MediaType: 65536, MediaDirection 1, Description: Microphone (SoundMAX Integrated Digital High Definition Audio)
09/30/2014|09:25:49.366 1C94:2140 INFO :: IMediaPlatformNotify::DevicePnpEvent(), DeviceAdded: 1, MediaDevice: 00000000055F7F10, MediaType: 65536, MediaDirection 2, Description: Speakers (SoundMAX Integrated Digital High Definition Audio)
09/30/2014|09:25:49.822 1C94:728 INFO :: Function: CUccAudioMediaDevice::InternalInitialize
09/30/2014|09:25:49.822 1C94:728 ERROR :: HRESULT API failed: 80004005 = hr. ParsePidVidMi
09/30/2014|09:25:49.822 1C94:728 INFO :: CUccAudioMediaDevice::InternalInitialize - DisplayName set to SoundMAX Integrated Digital High Definition Audio
09/30/2014|09:25:49.847 1C94:728 INFO :: CUccMediaDeviceManager::DeviceAdded - Device was added: id=122467008 name=[Rear Input (SoundMAX Integrated Digital High Definition Audio)]
09/30/2014|09:25:49.847 1C94:728 INFO :: CUccMediaDeviceManager::UpdateTelDeviceAdded - Checking if PnpName \\?\HDAUDIO#FUNC_01&VEN_11D4&DEV_194A&SUBSYS_10280420&REV_1004#4&14b6b4f2&0&0201#{0.0.1.00000000}.{1b4de4b7-2595-45f9-821b-1a0c947e0f2d}#
has EndpointID or not
09/30/2014|09:25:49.847 1C94:728 INFO :: CUccMediaDeviceManager::UpdateTelDeviceAdded - Found endpointID. PnpName without EndpointID is \\?\HDAUDIO#FUNC_01&VEN_11D4&DEV_194A&SUBSYS_10280420&REV_1004#4&14b6b4f2&0&0201#
09/30/2014|09:25:49.847 1C94:728 WARN :: We did not find device based on Name and Moniker match. Let's try to find device based on only name match
09/30/2014|09:25:49.847 1C94:728 INFO :: CUccMediaDeviceManager::InitializeVolumeForDevice: Volume was not found for the new deviceid = Rear Input (SoundMAX Integrated Digital High Definition Audio) in registry, initialized default volume to 26214
09/30/2014|09:25:49.847 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.847 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.847 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.847 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.847 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.847 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.847 1C94:728 TRACE :: CUccMediaManagerEventAdapter::OnMediaPlatformEvent - Processed MPEMT_DevicePnpEvent for 90033120l.
09/30/2014|09:25:49.847 1C94:728 TRACE :: CUccMediaManagerEventAdapter::OnMessage - Processed WM_MMGR_PLATFORM_EVENT.
09/30/2014|09:25:49.847 1C94:728 INFO :: Function: CUccAudioMediaDevice::InternalInitialize
09/30/2014|09:25:49.847 1C94:728 ERROR :: HRESULT API failed: 80004005 = hr. ParsePidVidMi
09/30/2014|09:25:49.847 1C94:728 INFO :: CUccAudioMediaDevice::InternalInitialize - DisplayName set to SoundMAX Integrated Digital High Definition Audio
09/30/2014|09:25:49.860 1C94:728 INFO :: CUccMediaDeviceManager::DeviceAdded - Device was added: id=122458592 name=[Microphone (SoundMAX Integrated Digital High Definition Audio)]
09/30/2014|09:25:49.860 1C94:728 INFO :: CUccMediaDeviceManager::UpdateTelDeviceAdded - Checking if PnpName \\?\HDAUDIO#FUNC_01&VEN_11D4&DEV_194A&SUBSYS_10280420&REV_1004#4&14b6b4f2&0&0201#{0.0.1.00000000}.{c43419f3-e1a3-459c-9d80-5c55b622ad62}#
has EndpointID or not
09/30/2014|09:25:49.860 1C94:728 INFO :: CUccMediaDeviceManager::UpdateTelDeviceAdded - Found endpointID. PnpName without EndpointID is \\?\HDAUDIO#FUNC_01&VEN_11D4&DEV_194A&SUBSYS_10280420&REV_1004#4&14b6b4f2&0&0201#
09/30/2014|09:25:49.860 1C94:728 WARN :: We did not find device based on Name and Moniker match. Let's try to find device based on only name match
09/30/2014|09:25:49.860 1C94:728 INFO :: CUccMediaDeviceManager::InitializeVolumeForDevice: Volume was not found for the new deviceid = Microphone (SoundMAX Integrated Digital High Definition Audio) in registry, initialized default volume to 26214
09/30/2014|09:25:49.860 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.860 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.860 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.860 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.860 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.860 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.860 1C94:728 TRACE :: CUccMediaManagerEventAdapter::OnMediaPlatformEvent - Processed MPEMT_DevicePnpEvent for 90033120l.
09/30/2014|09:25:49.860 1C94:728 TRACE :: CUccMediaManagerEventAdapter::OnMessage - Processed WM_MMGR_PLATFORM_EVENT.
09/30/2014|09:25:49.860 1C94:728 INFO :: Function: CUccAudioMediaDevice::InternalInitialize
09/30/2014|09:25:49.860 1C94:728 ERROR :: HRESULT API failed: 80004005 = hr. ParsePidVidMi
09/30/2014|09:25:49.860 1C94:728 INFO :: CUccAudioMediaDevice::InternalInitialize - DisplayName set to SoundMAX Integrated Digital High Definition Audio
09/30/2014|09:25:49.892 1C94:728 INFO :: CUccMediaDeviceManager::DeviceAdded - Device was added: id=121986704 name=[Speakers (SoundMAX Integrated Digital High Definition Audio)]
09/30/2014|09:25:49.892 1C94:728 INFO :: CUccMediaDeviceManager::UpdateTelDeviceAdded - Checking if PnpName \\?\HDAUDIO#FUNC_01&VEN_11D4&DEV_194A&SUBSYS_10280420&REV_1004#4&14b6b4f2&0&0201#{0.0.0.00000000}.{d12e03a4-4326-4cdf-bc8e-bc85f1c15184}#
has EndpointID or not
09/30/2014|09:25:49.892 1C94:728 INFO :: CUccMediaDeviceManager::UpdateTelDeviceAdded - Found endpointID. PnpName without EndpointID is \\?\HDAUDIO#FUNC_01&VEN_11D4&DEV_194A&SUBSYS_10280420&REV_1004#4&14b6b4f2&0&0201#
09/30/2014|09:25:49.892 1C94:728 WARN :: We did not find device based on Name and Moniker match. Let's try to find device based on only name match
09/30/2014|09:25:49.892 1C94:728 INFO :: CUccMediaDeviceManager::FireTelephonyDeviceCollectionChanged - Telephony device was added type=0x8 name=<[Microphone (SoundMAX Integrated Digital High Definition Audio)], [Speakers (SoundMAX Integrated Digital
High Definition Audio)]>
09/30/2014|09:25:49.893 1C94:728 INFO :: CUccMediaDeviceManager::InitializeVolumeForDevice: Volume was not found for the new deviceid = Speakers (SoundMAX Integrated Digital High Definition Audio) in registry, initialized default volume to 26214
09/30/2014|09:25:49.893 1C94:728 INFO :: CUccMediaDeviceManager::InitializeVolumeForDevice: Volume was not found for the new deviceid = Speakers (SoundMAX Integrated Digital High Definition Audio) in registry, initialized default volume to 26214
09/30/2014|09:25:49.893 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.893 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.893 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.893 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.893 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.893 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.893 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.893 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.893 1C94:728 INFO :: Function: CUccMediaDeviceManager::GetBoolProperty
09/30/2014|09:25:49.893 1C94:728 TRACE :: Condition failed with 80ee0058: 'spProperty.IsValid()'
09/30/2014|09:25:49.893 1C94:728 INFO :: CUccMediaDeviceManager::FireDeviceChanged - Default device changed to <Microphone (SoundMAX Integrated Digital High Definition Audio)> for category=2 media=1 direction=1 reason=2
09/30/2014|09:25:49.893 1C94:728 INFO :: CUccMediaDeviceManager::FireDeviceChanged - Selected device changed to <Microphone (SoundMAX Integrated Digital High Definition Audio)> for category=2 media=1 direction=1 reason=2
09/30/2014|09:25:49.893 1C94:728 INFO :: CUccMediaDeviceManager::FireDeviceChanged - Default device changed to <Speakers (SoundMAX Integrated Digital High Definition Audio)> for category=2 media=1 direction=2 reason=2
09/30/2014|09:25:49.893 1C94:728 INFO :: CUccMediaDeviceManager::FireDeviceChanged - Selected device changed to <Speakers (SoundMAX Integrated Digital High Definition Audio)> for category=2 media=1 direction=2 reason=2
09/30/2014|09:25:49.893 1C94:728 INFO :: CUccMediaDeviceManager::FireTelephonyDeviceChanged - Default telephony device changed to type=0x8 name=<[Microphone (SoundMAX Integrated Digital High Definition Audio)], [Speakers (SoundMAX Integrated Digital
High Definition Audio)]>
09/30/2014|09:25:49.893 1C94:728 INFO :: CUccMediaDeviceManager::FireTelephonyDeviceChanged - Selected telephony device changed to type=0x8 name=<[Microphone (SoundMAX Integrated Digital High Definition Audio)], [Speakers (SoundMAX Integrated Digital
High Definition Audio)]>
09/30/2014|09:25:49.893 1C94:728 INFO :: CUccMediaDeviceManager::FireDeviceChanged - Default device changed to <Speakers (SoundMAX Integrated Digital High Definition Audio)> for category=3 media=1 direction=2 reason=2
09/30/2014|09:25:49.893 1C94:728 INFO :: CUccMediaDeviceManager::FireDeviceChanged - Selected device changed to <Speakers (SoundMAX Integrated Digital High Definition Audio)> for category=3 media=1 direction=2 reason=2
09/30/2014|09:25:49.893 1C94:728 TRACE :: CUccMediaManagerEventAdapter::OnMediaPlatformEvent - Processed MPEMT_DevicePnpEvent for 90033120l.
09/30/2014|09:25:49.893 1C94:728 TRACE :: CUccMediaManagerEventAdapter::OnMessage - Processed WM_MMGR_PLATFORM_EVENT.
09/30/2014|09:25:49.953 1C94:728 INFO :: CUccServerEndpoint::Initialize - This endpoint is sharing presentity data.
09/30/2014|09:25:49.953 1C94:728 INFO :: CUccEndpoint::put_TelephonyTypewrite - Set TTY enabled to false
09/30/2014|09:27:10.301 1C94:728 INFO :: CUccPlatform::WriteStreamToLog:
09/30/2014|09:27:10.301 1C94:728 INFO :: <?xml version="1.0" encoding="UTF-8"?>
<root>
<Login>
<Info><![CDATA[Created DefaultCredential: CManagedCredential[DEFAULT this=00000000056B47A0]]]></Info>
<Info><![CDATA[Adding new managed cred CManagedCredential[DEFAULT this=00000000056B47A0]]]></Info>
<Info><![CDATA[Created DefaultProxyCredential: CManagedCredential[DEFAULT this=00000000056B48F0]]]></Info>
<Info><![CDATA[Adding new managed cred CManagedCredential[DEFAULT this=00000000056B48F0]]]></Info>
<Info><![CDATA[GetBestManagedCredentialByType return the cred: 0000000000000000, type:specific, userId:PHO]]></Info>
<Info><![CDATA[GetBestManagedCredentialByType return the cred: 0000000000000000, type:certificate, userId:OCS]]></Info>
<Info><![CDATA[Bootstrap task queued]]></Info>
<Info><![CDATA[Starting bootstrap task: baseUrl=, pinBased=0, forceDownloadRootCert=0, deviceId=F5331D57-7E19-5E17-80BC-05A4E02348F2, credType=0, cert=0000000000000000]]></Info>
<Info><![CDATA[Changed CBootstrapper status [10000] -> [10000]]]></Info>
<Info><![CDATA[Bootstrap task completed with hr=0x0]]></Info>
<Info><![CDATA[Changed CBootstrapper status [10000] -> [10006]]]></Info>
<Lync-autodiscovery>
<Info><![CDATA[GetBestManagedCredentialByType return the cred: 0000000000000000, type:specific, userId:LAD]]></Info>
<Info><![CDATA[Discovery request sent to URL http://[email protected], txn (000000000A9B8BD0), task(000000000E1B56E0)]]></Info>
<Info><![CDATA[GetBestManagedCredentialByType return the cred: 0000000000000000, type:specific, userId:LAD]]></Info>
<Info><![CDATA[Discovery request sent to URL https://[email protected], txn (000000000A9B8C10), task(000000000E1B5A60)]]></Info>
<Info><![CDATA[GetBestManagedCredentialByType return the cred: 0000000000000000, type:specific, userId:LAD]]></Info>
<Info><![CDATA[Discovery request sent to URL https://[email protected], txn (000000000A9B8BF0), task(000000000E1B5C20)]]></Info>
<Info><![CDATA[GetBestManagedCredentialByType return the cred: 0000000000000000, type:specific, userId:LAD]]></Info>
<Info><![CDATA[Discovery request sent to URL http://[email protected], txn (000000000A9B8C30), task(000000000E1B5DE0)]]></Info>
<Info><![CDATA[
Starting LogonSession...
Local interfaces: count=1, allExternal=0, someInternal=0, backend=0
Using loaded endpoint config
InitialEndpointConfig calculated...
networksAvailable=1
cacheAvailable=0
takenFromCache =0
Doing logon attempt with data:
currState=10
[email protected]
server=<auto-discovered name>, internal
authModes=0x1000c
with default Cred
proxyAuthModes=0x3f
epFlags=c8
withAutoRetrials=0
credsAvailability=valid
redirectedServersList=
newState=14
statusCode=0]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[task(000000000E1B56E0) is parsing autodiscovery response <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="Internal"><Root><Link token="Domain" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=mydomain.com"
/><Link token="User" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=mydomain.com" /><Link token="Self" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root?originalDomain=mydomain.com"
/><Link token="OAuth" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=mydomain.com" /><Link token="External/XFrame" href="https://lyncweb.mydomain.com/Autodiscover/XFrame/XFrame.html"
/><Link token="Internal/XFrame" href="https://pollnc003.mydomain.pvt/Autodiscover/XFrame/XFrame.html" /><Link token="XFrame" href="https://lyncweb.mydomain.com/Autodiscover/XFrame/XFrame.html" /></Root></AutodiscoverResponse>]]></Info>
<Info><![CDATA[task(000000000E1B5DE0) is parsing autodiscovery response <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="Internal"><Root><Link token="Domain" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=mydomain.com"
/><Link token="User" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=mydomain.com" /><Link token="Self" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root?originalDomain=mydomain.com"
/><Link token="OAuth" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=mydomain.com" /><Link token="External/XFrame" href="https://lyncweb.mydomain.com/Autodiscover/XFrame/XFrame.html"
/><Link token="Internal/XFrame" href="https://pollnc003.mydomain.pvt/Autodiscover/XFrame/XFrame.html" /><Link token="XFrame" href="https://lyncweb.mydomain.com/Autodiscover/XFrame/XFrame.html" /></Root></AutodiscoverResponse>]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[task(000000000E1B5C20) is parsing autodiscovery response <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="Internal"><Root><Link token="Domain" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=mydomain.com"
/><Link token="User" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=mydomain.com" /><Link token="Self" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root?originalDomain=mydomain.com"
/><Link token="OAuth" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=mydomain.com" /><Link token="External/XFrame" href="https://lyncweb.mydomain.com/Autodiscover/XFrame/XFrame.html"
/><Link token="Internal/XFrame" href="https://pollnc003.mydomain.pvt/Autodiscover/XFrame/XFrame.html" /><Link token="XFrame" href="https://lyncweb.mydomain.com/Autodiscover/XFrame/XFrame.html" /></Root></AutodiscoverResponse>]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[Discovery request sent to URL https://pollnc003.mydomain.pvt/Autodiscover/Aut
09/30/2014|09:27:10.301 1C94:728 INFO :: CUccPlatform::WriteStreamToLog:
09/30/2014|09:27:10.301 1C94:728 INFO :: odiscoverService.svc/root/[email protected], txn (000000000A9B8BD0), task(000000000E1B56E0)]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[Discovery request sent to URL https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/[email protected], txn (000000000A9B8C30), task(000000000E1B5DE0)]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[this request needs authentication, trying webticket from: https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc]]></Info>
<Get-NewWebTicket>
<Info><![CDATA[ExecuteWithMetadataInternal, asyncContext=00000000076CB950,
context: WebRequest context@ :238516128
MethodType:9
ExecutionComplete? :0
Callback@ :00000000076B6088
AsyncHResult:0
TargetUri:https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
.]]></Info>
<Info><![CDATA[Executing wws method with no auth auth, asyncContext=00000000076CB950,
context: WebRequest context@ :237671712
MethodType:0
ExecutionComplete? :0
Callback@ :00000000076FA0C0
AsyncHResult:0
TargetUri:https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc/mex
.]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[Discovery request sent to URL https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/[email protected], txn (000000000A9B8BD0), task(000000000E1B56E0)]]></Info>
<Info><![CDATA[this request needs authentication, trying webticket from: https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc]]></Info>
<Info><![CDATA[Discovery request sent to URL https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/[email protected], txn (000000000A9B8C30), task(000000000E1B5DE0)]]></Info>
<Info><![CDATA[Discovery request sent to URL https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/[email protected], txn (000000000A9B8BF0), task(000000000E1B5C20)]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[this request needs authentication, trying webticket from: https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc]]></Info>
<Info><![CDATA[Discovery request sent to URL https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/[email protected], txn (000000000A9B8BF0), task(000000000E1B5C20)]]></Info>
<Info><![CDATA[task(000000000E1B5A60) is parsing autodiscovery response <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="Internal"><Root><Link token="Domain" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=mydomain.com"
/><Link token="User" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=mydomain.com" /><Link token="Self" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root?originalDomain=mydomain.com"
/><Link token="OAuth" href="https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=mydomain.com" /><Link token="External/XFrame" href="https://lyncweb.mydomain.com/Autodiscover/XFrame/XFrame.html"
/><Link token="Internal/XFrame" href="https://pollnc003.mydomain.pvt/Autodiscover/XFrame/XFrame.html" /><Link token="XFrame" href="https://lyncweb.mydomain.com/Autodiscover/XFrame/XFrame.html" /></Root></AutodiscoverResponse>]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[Discovery request sent to URL https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/[email protected], txn (000000000A9B8C10), task(000000000E1B5A60)]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[this request needs authentication, trying webticket from: https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc]]></Info>
<Info><![CDATA[Discovery request sent to URL https://pollnc003.mydomain.pvt/Autodiscover/AutodiscoverService.svc/root/[email protected], txn (000000000A9B8C10), task(000000000E1B5A60)]]></Info>
<Info><![CDATA[Executing wws method with no auth auth, asyncContext=00000000076CB950,
context: WebRequest context@ :237671712
MethodType:0
ExecutionComplete? :1
Callback@ :00000000076FA0C0
AsyncHResult:3d0000
TargetUri:https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc/mex
.]]></Info>
<Info><![CDATA[ExecuteWithMetadataInternal, asyncContext=00000000076CB950,
context: WebRequest context@ :238516128
MethodType:9
ExecutionComplete? :0
Callback@ :00000000076B6088
AsyncHResult:3d0000
TargetUri:https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
.]]></Info>
<Info><![CDATA[GetBestManagedCredentialByType return the cred: 0000000000000000, type:certificate, userId:LAD]]></Info>
<Info><![CDATA[Executing wws method with windows auth auth, asyncContext=00000000076CB950,
context: WebRequest context@ :238516128
MethodType:4
ExecutionComplete? :0
Callback@ :00000000076B6088
AsyncHResult:3d0000
TargetUri:https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
.]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[Default Windows credential obtained for context=00000000076CB950.]]></Info>
<ExecuteWithMetadataInternal>
<SequenceID>1.1.1.1.1</SequenceID>
<hr>0x3d0000</hr>
</ExecuteWithMetadataInternal>
<ExecuteWithWindowsOrNoAuthInternal>
<SequenceID>1.1.1.1.2</SequenceID>
<hr>0x0</hr>
</ExecuteWithWindowsOrNoAuthInternal>
<Info><![CDATA[Executing wws method with windows auth auth, asyncContext=00000000076CB950,
context: WebRequest context@ :238516128
MethodType:4
ExecutionComplete? :1
Callback@ :00000000076B6088
AsyncHResult:80f10041
TargetUri:https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)'
09/30/2014|09:27:10.302 1C94:728 INFO :: CUccPlatform::WriteStreamToLog:
09/30/2014|09:27:10.302 1C94:728 INFO :: with text 'Unauthorized'.
The requested resource requires user authentication.
.]]></Info>
<Info><![CDATA[Logon success state 2 reported by user id=LAD (adjusted=LAD) on CManagedCredential[DEFAULT this=00000000056B47A0]]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x0000000007404D90 id=15 querying for specific credentials, credSuccess=0, targetName=Microsoft_OC1:[email protected]:specific:LAD:1]]></Info>
<ExecuteWithWindowsOrNoAuthInternal>
<SequenceID>1.1.1.1.3</SequenceID>
<hr>0x3d0000</hr>
</ExecuteWithWindowsOrNoAuthInternal>
<Info><![CDATA[Created CManagedCredential[SPECIFIC this=000000000E18A2A0, domain=mydomain, userName=]]]></Info>
<Info><![CDATA[Adding new managed cred CManagedCredential[SPECIFIC this=000000000E18A2A0, domain=mydomain, userName=]]]></Info>
<Info><![CDATA[GetBestManagedCredentialByType return the cred: 0000000000000000, type:specific, userId:OCS]]></Info>
<Info><![CDATA[
ACTION : RESUME SIGNIN AFTER NEW CRED
Doing logon attempt with data:
currState=20
[email protected]
server=<auto-discovered name>, internal
authModes=0x1000c
with default Cred
proxyAuthModes=0x3f
epFlags=c8
withAutoRetrials=0
credsAvailability=valid
redirectedServersList=
newState=14
statusCode=1]]></Info>
<Info><![CDATA[Specific Windows credential obtained for context=00000000076CB950.]]></Info>
<Info><![CDATA[Executing wws method with windows auth auth, asyncContext=00000000076CB950,
context: WebRequest context@ :238516128
MethodType:4
ExecutionComplete? :0
Callback@ :00000000076B6088
AsyncHResult:3d0000
TargetUri:https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
.]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<ExecuteWithWindowsOrNoAuthInternal>
<SequenceID>1.1.1.1.4</SequenceID>
<hr>0x3d0000</hr>
</ExecuteWithWindowsOrNoAuthInternal>
<Info><![CDATA[Executing wws method with windows auth auth, asyncContext=00000000076CB950,
context: WebRequest context@ :238516128
MethodType:4
ExecutionComplete? :1
Callback@ :00000000076B6088
AsyncHResult:80f10041
TargetUri:https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
.]]></Info>
<Info><![CDATA[Logon success state 2 reported by user id=LAD (adjusted=LAD) on CManagedCredential[SPECIFIC this=000000000E18A2A0, domain=mydomain, userName=]]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x0000000007404D90 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1]]></Info>
<ExecuteWithWindowsOrNoAuthInternal>
<SequenceID>1.1.1.1.5</SequenceID>
<hr>0x3d0000</hr>
</ExecuteWithWindowsOrNoAuthInternal>
<Info><![CDATA[Created CManagedCredential[SPECIFIC this=000000000E33F360, domain=mydomain, userName=]]]></Info>
<Info><![CDATA[Adding new managed cred CManagedCredential[SPECIFIC this=000000000E33F360, domain=mydomain, userName=]]]></Info>
<Info><![CDATA[GetBestManagedCredentialByType return the cred: 0000000000000000, type:specific, userId:OCS]]></Info>
<Info><![CDATA[
ACTION : RESUME SIGNIN AFTER NEW CRED
Doing logon attempt with data:
currState=20
[email protected]
server=<auto-discovered name>, internal
authModes=0x1000c
with default Cred
proxyAuthModes=0x3f
epFlags=c8
withAutoRetrials=0
credsAvailability=valid
redirectedServersList=
newState=14
statusCode=1]]></Info>
<Info><![CDATA[Specific Windows credential obtained for context=00000000076CB950.]]></Info>
<Info><![CDATA[Executing wws method with windows auth auth, asyncContext=00000000076CB950,
context: WebRequest context@ :238516128
MethodType:4
ExecutionComplete? :0
Callback@ :00000000076B6088
AsyncHResult:3d0000
TargetUri:https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
.]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<ExecuteWithWindowsOrNoAuthInternal>
<SequenceID>1.1.1.1.6</SequenceID>
<hr>0x3d0000</hr>
</ExecuteWithWindowsOrNoAuthInternal>
<Info><![CDATA[Executing wws method with windows auth auth, asyncContext=00000000076CB950,
context: WebRequest context@ :238516128
MethodType:4
ExecutionComplete? :1
Callback@ :00000000076B6088
AsyncHResult:80f10041
TargetUri:https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://pollnc003.mydomain.pvt/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
.]]></Info>
<Info><![CDATA[Logon success state 2 reported by user id=LAD (adjusted=LAD) on CManagedCredential[SPECIFIC this=000000000E18A2A0, domain=mydomain, userName=]]]></Info>
<Info><![CDATA[CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0000000007404D90 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]]]></Info>
<Info><![CDATA[CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x0000000007404D90 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1]]></Info>
<ExecuteWithWindowsOrNoAuthInternal>
<SequenceID>1.1.1.1.7</SequenceID>
<hr>0x3d0000</hr>
</ExecuteWithWindowsOrNoAuthInternal>
<SequenceID>1.1.1.1</SequenceID>
<hr>0x1</hr>
</Get-NewWebTicket>
<SequenceID>1.1.1</SequenceID>
<hr>0x1</hr>
</Lync-autodiscovery>
<SequenceID>1.1</SequenceID>
<hr>0x1</hr>
</Login>
</root> -
At the OVM console the login fails
Hi,
I have created a virtual machine using paravirtualized Oracle Enterprise Linux 4. When I open the console and enter the login and password for the Virtual machine system username it fails to log in. It says log in incorrect. What can be the cause of this problem ?
Thanks
SubratI can now login using Username - root and password - ovsroot.
Thanks
Subrat
Maybe you are looking for
-
I have been going to some websites recently trying to see some videos. Instead of a thumbnail there is a puzzle piece and it says need to download Quicktime 7.6.6 or higher. I can't view the video. I am on a Mac desktop using OSX 10.10.2. The web
-
Large Pdf using XML XSL - Out of Memory Error
Hi Friends. I am trying to generate a PDF from XML, XSL and FO in java. It works fine if the PDF to be generated is small. But if the PDF to be generated is big, then it throws "Out of Memory" error. Can some one please give me some pointers about th
-
Right Click PDF print the file prints & closes Adobe stays open
This issue has been brought up in the past however there does not appear to be an adequate solution. It appears it was introduced as far back as version 8, I am basing from what I read in posting. When you right click a PDF to print Adobe opens the f
-
HI, My SRM Quality gets re-freshed and i am on ECS scenario, i change all the ALE settings and now i am able to create a Shopping cart but when PO is created in my SRM system it is not replicated in ECC quality and i can see my status of the Purchase
-
Howdy gang! I have inherited an application with a fairly large number of cfcs. The codebase goes back quite a few years. Though the code is in mostly decent shape, as with most long lived apps, there are files no longer in use, etc. I am hoping to f