Username/Password for SAP MMC

I am trying to start the JAVA AS from MMC , i tried all the possible usernames and passwords but everytime it gives invalid username or password.
Kindly help.
Regards,
Amit

Hi,
Try systemname\<sid>adm ......
The password is the one which you have provided at installation.
Thanks & Regards,
Vijith

Similar Messages

Initial password for SAP* in SAP NetWeaver 2004s ABAP Edition

Hello,
I have just installed the SAP NetWeaver 2004s ABAP Edition on my PC and I want to setup some new clients to simulate an ALE model.
Does anyone know the initial password for SAP* ?
I have already tried PASS and pass because I know it is case -sensitive now but it did not work.
Thanks a lot.
Wim Van den Wyngaert

Hi,
initial SAP* password is 06071992
DDIC is 19920706

How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

Hi,
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
I tried with acual method as below from client '000':
DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
After this when I tried to logon '001' using SAP* with password PASS it is giving the message that Incorrect logon and password.
(Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
Can anybody throw some light on this? RewardS is guranteed for solutions!
-B S B

Hi again:
I forget to tell.
You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
Hope this wil help,
Eric

I want to erase the automatic sign-in of username & password for facebook, because firefox always rfemembers my username & password. How will i disable it? please help.. thanks

How will i disable the auto sign in of my username & password for facebook?

If you saved the password in Firefox, you can clear that here:
orange Firefox button > Options > Security > "Saved Passwords"
''or''
Tools menu > Options > Security > "Saved Passwords"
It's also possible that you have a cookie that keeps you logged in, but in that case, signing off from Facebook should end your session.

Username/Password for Examples App

This is probably a stupid question, but does anyone know the Username/Password for Vikas's Examples Application? I downloaded and imported it into my workspace but when I run it, I cannot log in!!!

Hello,
Are you speaking about this app:? http://apex.oracle.com/pls/otn/f?p=24317:500:1182459246082825
You can send Vikas always a mail, he has contact info on there.
I guess you asked that question also in another thread (chart in report)?
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

Deafoult password for sap 7.6

Hi all
Please tell me the login & password for sap 7.6 .
L:manager P:manager dosn`t work.
i`m wondering is it possible that somethings rong with SBO-COMMON DB .Beacouse i had a sap 2007 and unstall it then i instaled sap 7.6.
Thanks

I think that only way is to reset password. Look at
/message/4722385#4722385 [original link is broken]
there is described from David, how to change through sql queries password back to manager.
hope it helps
Petr

Problems setting up username & password for SQL

Due to the outstanding advice I recieved from this excellent forum, I have managed to overcome my first problem with declaring a new Class.
This leads me to request help with my next biggest problem:
Setting up a user GUI that takes a "username" & "password" that will be used to access a password protected database.
I am a simple bloke, with simple thought processes, so please, go easy on me...
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class DBQuery1 {
     String username = "" , password = "";
     public static void main(String[] arguments) {
          PassDB UPass = new PassDB();
          String data = "jdbc:odbc:JavaTestDataBase";
          try {
               Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
               Connection conn = DriverManager.getConnection(data, "" + username, "" + password);
               Statement st = conn.createStatement();
               ResultSet rec = st.executeQuery(
                    "SELECT Title, ContactID, First, Last, Dear FROM Contacts "
                    + "WHERE (Title='Mr') ORDER BY ContactID");
          /*     ResultSet rec2 = st.executeQuery(
                    "SELECT Subject, ContactID FROM Calls "
                    + "WHERE (Subject Is Not Null) ORDER BY ContactID");
          System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
          while(rec.next()) {
               System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
          st.close();
          catch (SQLException s) {
               System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
          catch (Exception e) {
               System.out.println("Error: " + e.toString() + e.getMessage());
class PassDB extends javax.swing.JFrame implements ActionListener {
     String username = "", password = "";
     JTextField uname = new JTextField(10);
     JTextField pword = new JTextField(10);
     // JPasswordField pword = new JTextField(10);
     PassDB() {
          super("duBe's database logon");
          setSize(220, 160);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          JPanel pane = new JPanel();
          JLabel unameLabel = new JLabel ("Username: ");
          JLabel pwordLabel = new JLabel ("Password: ");
          JButton submit = new JButton("OK");
          submit.addActionListener(this);
          pane.add(unameLabel);
          pane.add(uname);
          pane.add(pwordLabel);
          pane.add(pword);
          pane.add(submit);
          setContentPane(pane);
          setVisible(true);
     public void actionPerformed(ActionEvent evt) {
          PassDB clicked = (PassDB)evt.getSource();
          username = uname.getText();
          password = pword.getText();
This code generates two errors, stating:
C:\Java_progs>javac DBQuery1.java
DBQuery1.java:14: non-static variable username cannot be referenced from a static context
Connection conn = DriverManager.getConnection(data, "" +
username, "" + password);
^
DBQuery1.java:14: non-static variable password cannot be referenced from a static context
Connection conn = DriverManager.getConnection(data, "" +
username, "" + password);
                ^
2 errors*****************************
The code works when I remove the reference to the variables "username" & "password" in Connection "conn" call & replace them with the actual username & password, but this is not exactly what I was after. I was hoping to make the program responsive to each individual user, not set in code.
I also would like to make the program pause after the call in "main" to "PassDB" to wait for "PassDB" to exit before continuing.
I would also like to make "PassDB" destroy itself after the "OK" button is pressed & the "username" & "password" set.
If that isn't enough for you, I would really like the program to search 2 different database tables, return their values & compare them to be sure that they are the same.
When I try & search 2 different tables, as in:
ResultSet rec = st.executeQuery(
                    "SELECT Title, ContactID, First, Last, Dear FROM Contacts "
                    + "WHERE (Title='Mr') ORDER BY ContactID");
               ResultSet rec2 = st.executeQuery(
                    "SELECT Subject, ContactID FROM Calls "
                    + "WHERE (Subject Is Not Null) ORDER BY ContactID")javac tells me that "ResultSet" is set to null 0
As always, I am extremely appreciative of any assistance you are able to offer.
Kind regards
duBedat
[email protected]

This is where I'm at now:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class DBQuery {
     static String username = "" ;
     static String password = "" ;
     public static void main(String[] arguments) {
     PassDB UPass = new PassDB();
     String data = "jdbc:odbc:JavaTestDataBase";
     try {
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          Connection conn = DriverManager.getConnection(data, "" + DBQuery.username, "" + DBQuery.password);
          Statement st = conn.createStatement();
          ResultSet rec = st.executeQuery(
          "SELECT Title, ContactID, First, Last, Dear FROM Contacts "
          + "WHERE (Title='Mr') ORDER BY ContactID");
          /*     ResultSet rec2 = st.executeQuery(
               "SELECT Subject, ContactID FROM Calls "
               + "WHERE (Subject Is Not Null) ORDER BY ContactID");
          System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
          while(rec.next()) {
               System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
          st.close();
     catch (SQLException s) {
          System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
     catch (Exception e) {
          System.out.println("Error: " + e.toString() + e.getMessage());
class PassDB extends javax.swing.JFrame implements ActionListener {
     static boolean getOut = false;
     JTextField uname = new JTextField(10);
     JTextField pword = new JTextField(10);
     // JPasswordField pword = new JTextField(10);
     public PassDB() {
          super("duBe's database logon");
          setSize(220, 160);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          JPanel pane = new JPanel();
          JLabel unameLabel = new JLabel ("Username: ");
          JLabel pwordLabel = new JLabel ("Password: ");
          JButton submit = new JButton("OK");
          submit.addActionListener(this);
          pane.add(unameLabel);
          pane.add(uname);
          pane.add(pwordLabel);
          pane.add(pword);
          pane.add(submit);
          setContentPane(pane);
          while(getOut == false)
               setVisible(true);
     public void actionPerformed(ActionEvent evt) {
          PassDB clicked = (PassDB)evt.getSource();
          DBQuery.username = uname.getText();
          DBQuery.password = pword.getText();
          getOut = true;
}          Any advice is greatly appreciated
duBe

Ipad can't store username password for websites

I'm using an iPad Wifi with 3.2.1 and I am not the only one that is having a problem with Safari storing username and password for websites that need credentials.
I cleared 'cookies', 'history' and 'cache' but that doesn't help.
The desired websites don't show a popup if I would like to store the username and password for a website.
Message was edited by: Wolfii82

JimHdk wrote:
Wolfii82 wrote:
I'm using an iPad Wifi with 3.2.1 and I am not the only one that is having a problem with Safari storing username and password for websites that need credentials.
I cleared 'cookies', 'history' and 'cache' but that doesn't help.
The desired websites don't show a popup if I would like to store the username and password for a website.
Message was edited by: Wolfii82
Web sites with high security, i.e., banks, financial institutions, etc., do not allow user-id/password saving. If you are visiting one of these it is normal for no save dialog to be displayed in Safari.
We could say more if you identified the web sites that you are talking about.
I wouldn't allow the user name/password to be stored for any financial institution, even if the website allowed it. And the iPad isn't exactly the most secure device, so I would be really concerned if I lost it.

ORA-01017: invalid username/password; for Oralce 12c OEM installation

Hi Experts,
Following error Oralce 12c OEM installation ,i have no clue sys user passowrd is correct in response/new_install.rsp file
[oracle@sdp12 OEM_Packages]$ ./runInstaller -silent -responseFile /oracle/oracle8/OEM_Packages/response/new_install.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 400 MB. Actual 1222 MB Passed
Checking swap space: must be greater than 150 MB. Actual 4000 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-02-24_06-22-19PM. Please wait ...[oracle8@sdp38 OEM_Packages]$
ERROR: ERROR:Exception occurred while connecting to database. Check the connection details of the database you specified and retry.
ORA-01017: invalid username/password; logon denied
Unable to connect to the database and validate whether it is a supported database due to one of the following reasons:
(1) Incorrect credentials
(2) Listener may be down
(3) Database may be down
Check the credentials ,the status of the listener and the database and retry.
i am able to connect using same username password
[oracle8@sdp38 response]$ sqlplus sys/sys512@TET1
SQL*Plus: Release 11.2.0.1.0 Production on Sun Feb 24 18:29:15 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
From response/new_install.rsp file
DATABASE_HOSTNAME=sdp12
LISTENER_PORT=1521
SERVICENAME_OR_SID=TET1
SYS_PASSWORD=sys512
SYSMAN_PASSWORD=sysman512
SYSMAN_CONFIRM_PASSWORD=sysman512
i have no clue here, any help greatly appropriated
thanks

few things you can check :
a) Is there a password file ? Is the password correct in it ?
b) SYSDBA remote login is disabled. remote_login_passwordfile is not set to EXCLUSIVE in the spfile or init.ora.
Set: remote_login_passwordfile= EXCLUSIVE
Create a password file:
Unix: $
orapwd file=$ORACLE_HOME/dbs/orapw$ORACLE_SID password=sys entries=5
Windows:
C:\> orapwd file=%ORACLE_HOME%\database\pwd%ORACLE_SID% password= sys entries=5
To synchronize the password for sys for normal connections and connections as sysdba connect as a sysdba user and reset the sys password:
$ sqlplus "/ as sysdba" SQL> ALTER USER SYS IDENTIFIED BY change_on_install;

Username passwords for client 000

Dear All,
I don't have credentials of SAP* DDIC in DEV QAS and PRD of client 000.
Can you please let me know steps to recover the passwords?
Please let me know the steps or ways . don't put external links
Regards
Nikhil

Hi Nikhil,
You follow below process to reset the password and login to your ABAP system
1) set profile parameter login/no_automatic_user_sapstar=0 in instance profile
2) Delete SAP* from database table from client 000
SQL> delete from <schema>.<USR02> where bname='SAP*' and MANDT='000'
3) Take restart of SAP application
4) Login to 000 client with user = SAP* and password= pass
5) Using this ID you can reset password for other users like DDIC.
6) Once You can login with DDIC , you may create SAP* again using SU01.
Hope this helps.
Regards,
Deepak Kori

Setting the username & password for the plain http adapter.

Hi,
When i am passing in an HTTP request into the integration engine's plain_http adapter url, i am required to give a username and a password for authentication.
Is it possible to set this username and password globally some where, to avoid this to be given again for each message?
The requirement is like, all http messages from our partners will be routed through a proxy in the DMZ which would have an authentication and we donot want the XI user credentials to be given again.
Thanks & Regards,
Renjith.

If you want to just test http adapter use the code by stefan grube in the following thread.
/message/266750#266750 [original link is broken]
Thanks for the points
regards
SKM

Emca Continually Shows "Invalid username/password" for the DBSNMP User

Hi,
During configure dbconsole DBSNMP user is giving invalid password whereas i am able to connect dbsnmp using sqlplus as below.
SQL> conn dbsnmp/dbsnmp@UAT
Connected.
while i m tryin to configure dbconsole got below error
emca -config dbcontrol db -repos create
$emca -config dbcontrol db -repos create
STARTED EMCA at May 29, 2010 4:29:31 PM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: UAT
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Invalid username/password.
Password for DBSNMP user:
Invalid username/password.
Password for DBSNMP user:
Thanks

Hi,
Ok i will do in future.
I did as you said but issue is still coming.Now the error is bit different in the log file For this same error i found solution in meta doc id 337260.1 for exact error In the solution i have to to set the value as below but it has already same value.
Error:
CONFIG: SQLEngine created successfully and connected
May 29, 2010 5:03:06 PM oracle.sysman.emcp.DatabaseChecks validateUserCredential
CONFIG: Failed to update account status.
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACL
E not available
Solution:
In order to fix the Invalid username/password message
Check the profile limit for the users SYSMAN, DBSNMP and MGMT_VIEW
select u.username, u.profile, p.resource_name, p.limit
from dba_profiles p, dba_users u
where p.profile=u.profile
and u.username in ('SYS', 'SYSMAN','DBSNMP','MGMT_VIEW')
and p.resource_type = 'PASSWORD'
order by u.username, p.resource_name;
If the value of LIMIT for PASSWORD_VERIFY_FUNCTION is not NULL:
Change the password so that it meets the function requirements.
If the value of LIMIT for PASSWORD_REUSE_MAX is not UNLIMITED:
Change the password so that it is different from a password that has already been used the number of times set in PASSWORD_REUSE_MAX.
Or
Change the value of LIMIT for PASSWORD_REUSE_MAX to UNLIMITED for the profile.
Below output of 1st query:
USERNAME     PROFILE     RESOURCE_NAME     LIMIT
DBSNMP     DEFAULT     FAILED_LOGIN_ATTEMPTS     UNLIMITED
DBSNMP     DEFAULT     PASSWORD_GRACE_TIME     UNLIMITED
DBSNMP     DEFAULT     PASSWORD_LIFE_TIME     UNLIMITED
DBSNMP     DEFAULT     PASSWORD_LOCK_TIME     .0006
DBSNMP     DEFAULT     PASSWORD_REUSE_MAX     UNLIMITED
DBSNMP     DEFAULT     PASSWORD_REUSE_TIME     UNLIMITED
DBSNMP     DEFAULT     PASSWORD_VERIFY_FUNCTION     NULL
SYS     DEFAULT     FAILED_LOGIN_ATTEMPTS     UNLIMITED
SYS     DEFAULT     PASSWORD_GRACE_TIME     UNLIMITED
SYS     DEFAULT     PASSWORD_LIFE_TIME     UNLIMITED
SYS     DEFAULT     PASSWORD_LOCK_TIME     .0006
SYS     DEFAULT     PASSWORD_REUSE_MAX     UNLIMITED
SYS     DEFAULT     PASSWORD_REUSE_TIME     UNLIMITED
SYS     DEFAULT     PASSWORD_VERIFY_FUNCTION     NULL
Thanks

Password for sap* / ddic

Hi,
I am trying to reset the pw for sap* / ddic for the client 000. I searched this forum and got many options,I tried all of them. But none of them seems to work.
Now I am getting the error, logon no longer possible, too many failed attempts'.
I did update the users at USR02 table for locnt and uflag, I tried a custom abap program which i got from this forum, but nothing works.
Any help? Thanks,
If anyone one knows of not logging into client 000 for doing transports, please let me know. I have access to this box from different clients for sap* / ddic users. SAP document says that I need to logon to client 000 to do transports.
Regards,
Sundar.

Hi ,
If all the users are locked, they can be unlocked by
a)Try this command at ur sql plus query level
Go to cmd prompt.
Sqlplus /nolog
conn /as sysdba
this will take you to the sqlprompt.
Just execute the earlier commands there.
sqlplus>UPDATE SAP<schema>.usr02 set uflag=0 where mandt=<CLNT NO> and uflag=64; this statement actually unlocks the users of that particular client. So, try for every client in that sap system.
b) You can delete sap* user
Go to cmd prompt.
Sqlplus /nolog
conn /as sysdba
sqlplus>DELETE SAP<SID>.usr02 where mandt='CLIENT.NO' and bname=SAP*;
Note:-
After doing this restart the system. So, that a new user with the name "sap" gets generated with password "pass". Provided the parameter is set login/no_automatic_user_sapstar= 0 (Automatic user SAP is permitted).
regards,
kanthi

Multiple popups for username/password for basic authentication.

Safari 4.0.5 (5531.22.7) gives multiple popups for username/password while requesting a page which has more than one 'secure' items in it (basic auth). We expected that Safari to reuse the credentials entered the first time around and pass it on for subsequent requests. (Although RFC 2617 specifies that the credentials 'may' be reused, not really sure what Safari is doing here, though this seems to be the behavior on other popular browsers).
There's another discussion that listed this problem but that too seems to be unresolved yet (http://discussions.apple.com/message.jspa?messageID=2074214).

HI and welcome to Apple Discussions...
If you have tried the suggestions at that link but nothing worked, update Safari.
Apple Menu / Software Updates.
Repair disk permissions after the updates are installed.
Carolyn

How to get the admin username & password for JMX connection

Hi All,
I need to retrieve the username & password and pass it to the JNDI to get the JMX connection for MBean Server. I will be doing this locally.
Is there an API that I can use to retrieve this information ?
thanks
-sheshi

Forgot to mention, I am using WebLogic 9.1

Username/Password for SAP MMC

Similar Messages

Maybe you are looking for