Username prompt and empty parameter
Hi All,
I am installing the Business Object on Linux machine. There are two issues that comes up at times even after the successful installation of the BO. The problems are:
1) User name and password is provided during the installation but the report prompts for the same at times. Mostly the prompt is not being displayed after the installation of BO but when again a fresh installation is done it might prompt also.
2) Parameter and their values are given in the report files but sometimes the parameter values is being displayed "Empty" when the report parameters are expanded for scheduling due to which scheduling of reports also fails. In this case too parameters values are displayed correctly in most of the case, but there are instances when after the successful installation of the BO(Business Object) again on another instance this problem occurs.
The log for the business object rpm installation does not shows an error even the above stated problem comes up.
Can anyone suggest how can the installation be made successful so that the issues as stated above does not occur again. If you need any more information in regard to this problem do let me know.
Please re-post if this is still an issue to the Business Objects Forum or purchase a case
and have a dedicated support engineer work with your directly
Similar Messages
-
Hi,
I need to store one variable value and I need to retrieve the same variable value in same program. For this I have written set and get parameter ids in the same program. It is working fine but if I log off the system and if I logon the system it is not working I mean before log off the variable is showing some value if I log on again that variable is showing empty. But I want to capture the field values after log off and log on also. Is there any other option can I use table?
Please help me I will give points.
Thanks.Hi
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens
SAP global memory retains field value through out session.
set parameter id 'MAT' field v_matnr.
get parameter id 'MAT' field v_matnr.
They are stored in table <b>TPARA</b>.
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data
to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
ABAP memory is temporary and values are retained in same LUW.
export itab to memory id 'TEST'.
import itab from memory Id 'TEST'.
Here itab should be declared of same type and length.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
ABAP Memmory & SAP Memmory
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
Regards
Anji -
Can't figure out how to change username, shortname and home directory?
Hello,
Trying to change the username, shortname and home directory on a new Macbook.
I tried the following article to do this:
http://www.macworld.com/article/132693/2008/03/changeshortusername.html
This is my problem after trying the above article:
I tried this but got stuck when it came to entering my password into terminal. After entering in the sudo command I hit return and saw the password prompt but when I tried to type my password in nothing happened at all as cursor never moved. I hit return again terminal tells me that there is no folder named "new user name" I restarted my Mac and tried it all over again and got the same message. When I go into the original account I see the shortname and home directory are changed but the username is the original one I started with.
How do I make the password cursor move. Have I missed something?
My Macbook if very new and I don't care what I lose on here. Thinking of doing a complete reinstall and updating all over again. Is there a way to fix this?
Help anyone?After entering in the sudo command I hit return and saw the password prompt but when I tried to type my password in nothing happened at all as cursor never moved.
This is intentional.
I hit return again terminal tells me that there is no folder named "new user name" I restarted my Mac and tried it all over again and got the same message.
Enter the actual old and new names into the Terminal instead of 'new user name'.
(35525) -
I have a publisher 11g (v 11.1.1.7) report with a single parameter. The report is based on a data model not a subject area. I created a dashboard put a dashboard prompt and link to the report in separate section on the same page. The dashboard prompt sets a presentation variable named the same as the parameter in the report.
The problem was when I created the dashboard prompt, it forced me to select a subject area which I did (though did not want to) and then I created both a column and variable prompts. But clicking on the
report link completely ignored the value that I thought would be passed in the presentation variable to the report.
Side note : My report uses a pdf template for its layout where I have mapped the columns names from my data model to the form fields on the pdf form. I noticed that if I create a publisher report based on a subject area, then I do not have the choice to choose a PDF as a template type for my layout. (I only see BI Publisher Template as a choice).
I see some documentation online that suggest it could be done in 10g.
Thanks
M. JamalOk,
I just tried that and it still doesn't pass anything to the prompt.
I changed the prompt to an edit field and I made the following weblink but when i click the link from an account it doesn't put anything in the prompt and all data for all accounts is shown.
This is the URL maybe I messed something up...
https://secure-ausomx###.crmondemand.com/OnDemand/user/Dashboard?OMTHD=ShowDashboard&OMTGT=ReportIFrame&SelDashboardFrm.Dashboard Type=%2fshared%2fCompany_########_Shared_Folder%2f_portal%2f360+Report&Option=rfd&Action=Navigate&P0=1&P1=eq&P2=Account."Account Name"&P3=%%%Name%%%
thanks -
Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guysOkay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;) -
What to Enter in Username,Password and Host String in SQL Plus 8.0??
I downloaded Oracle Forms,Reports 6i.Along with it I got SQL Plus 8.0.Following
are not working
Username:scott
Password:tiger
Host String:Empty
or
Username :system
Password:manager
Host String:Empty
I want to Know what to enter for Username,password and Host String.If i want to look in the TNSNAMES.ORS Plz Tell What to look for in it.Developer 6i is a client software, not database server. Ask the dba of the database, you are trying to connect, for valid userids/passwords/hoststrings.
Werner -
HELP FOR RUN PHOTOSHOP IN COMMAND PROMPT AND OPEN FILE
HELLO
i have problem for run photoshop in cmd(command prompt) and
open a file immediate
for example:
D:\Program Files\Adobe\Photoshop CS>Photoshop.exe -open -f:\1.jpg
but these not answer
I need parameter open in photoshop
please help me
thanksI would right click on 1.jpg. Select Open with... Select Choose default program... Pick Photoshop and make sure you check "always use the selected program to open this kind of file."
D:\1.jpg
Would then open photoshop. -
How to fill empty parameter (selection-option)
Hi!
On selection screen I have two parameters (s_egrid and s_empid). If user enter something in first (but not in second) one, second one should be filled from database.
The problem is that I don't know how to fill the empty parameter.
Let's say that i have an internal table i_zemployee with list of all necessary employee Id's (stored in field empid)
if I Ioop like this
loop at i_zemployee into wa_zemployee.
insert wa_zemployee-empid into s_empid.
endloop.
... I did something stupid but i hope that you understand what i need:
s_emipd[1] = 'u1'.
s_emipd[2] = 'u7'.
s_emipd[3] = 'u9'.
... like array of user id's.
and this s_empid I need in my next SELECT statement like
SELECT * FROM ...
WHERE empid in s_empid.
if someone knows the solution thanks in advance!
T.HI try something like this...
tables: mara, makt.
data: begin of itab occurs 0,
matnr like mara-matnr,
end of itab.
data : begin of btab occurs 0,
maktx like makt-maktx,
end of btab.
ata mak like makt-maktx.
DATA : return like ddshretval occurs 0 with header line.
data: begin of dynpfields occurs 3.
include structure dynpread.
data: end of dynpfields.
select-options: p_matnr for mara-matnr.
select matnr from mara into table itab where matnr IN p_matnr.
loop at itab.
write: / itab-matnr.
endloop.
Initialization.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_matnr.
REFRESH ITAB.
SELECT matnr FROM mara INTO TABLE ITAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MATNR '
dynprofield = 'P_MATNR '
dynpprog = sy-REPID
dynpnr = sy-dynnr
value_org = 'S'
TABLES
value_tab = ITAB
return_tab = return.
select single maktx from makt into mak where matnr = return-fieldval.
p_matnr = return-fieldval.
refresh return.
clear return.
move 'P_MAKTX' to dynpfields-fieldname.
move mak to dynpfields-fieldvalue.
append dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = 'SY-REPID'
dynumb = '1000'
tables
dynpfields = dynpfields
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh return.
clear return.
validate according to ur requirement.
Regards
Syed A -
Does anybody know how to get System Preferences? A couple of weeks ago I put it in the trash and emptied it. Does anyone know how to reinstall it?
How Restore Deleted or Missing OS X Components
A few of the basic OS X installed applications can be restored from the Optional Installs installer located in the Optional installs folder on your Installer DVD. However, if what you need is not there then follow the instructions below.
How to Use Pacifist to Restore Deleted or Missing OS X Components
Insert the OS X Installer DVD into the optical drive. Use a simple utility like TinkerTool to toggle invisibility so you can see invisible items. Alternatively, open the Terminal application in your Utilities folder and at the prompt enter the following:
defaults write com.apple.finder AppleShowAllFiles Yes
Press RETURN.
To turn off the display of invisible files repeat the above command substituting No for Yes.
The install packages are located in the /System/Installation/ folder on the DVD.
Download the shareware utility Pacifist. Use it to extract a fresh copy of the missing item(s) from the file archives on your OS X installation DVD. The file archives are in the /System/Installations/ folder (use Go to Folder option in the Go menu of the Finder.)
Here are Four Basic ways to use Pacifist (courtesy of George Orville.)
A. Drag a .pkg icon onto the Pacifist window .....proceed to step 7.
B. Click on “Open Package ....” and navigate to package desired and click “Open” in
the open/save window.....proceed to step 7.
C. Insert Mac OS X installer CD and when it mounts, navigate to .... Menu->Go->Go
to Folder. In the path field enter or paste ....
/Volumes/disc name/System/Installation/Packages (where disc name is the name of the CD/DVD that you inserted.)
Click on the "Go" button ..... • Drag a .pkg to Pacifist..... proceed to step 7.
The package you'll need will have to be discovered by trial and error, but for most applications you should start with the Essentials.pkg and/or Additional Essentials.pkg.
D. Insert your Mac OS X install disk 1 .... and open Pacifist.
1. In Pacifist, select "Open Mac OS X Install Packages" ... dialog may appear asking for disk 2, then disk 3 and finally disk 1 again.... {if DVD is not used)...If “Stop Loading” is selected...the procedure will stop!!!
2a. When loading is complete, a new window appears, click the triangle to display contents of each package...Select item and proceed to step 7.
2b. or click the “Find” icon in the Pacifist window and type the name of the software you need.
3. In the list that comes back, click the top most entry for the item that you want. ..... that is the one for the English language.
4. On the top of the Pacifist window, click “verify” .... you will probably be prompted for your password.
5. Enter checks for.... “verify permissions” and “verify file contents.” and click “verify” ....enter password when prompted.... you will get back output which may look like this:
20 files were scanned. 20 of 20 files were present on the hard disk. 0 of 20 files had file permissions that did not match those specified in the package. 0 of 20 files had checksums that did not match those specified in the package.
6. Click “close”. Go to step 7.
Extract or Install........
7. In the Toolbar (upper left), you now have the option to extract or install. Click a file in the lower list and those two icons will be enabled.
8. If “Extract to...” is selected.... navigate to the location where the file will be placed, select “choose”, select “extract” in new dialog that appears,authenicate , if prompted, click “OK”.
9. In the next dialog, click “Extract”.
10. If “Install” is selected... dialog will appear with the location/path of the installed software. Click “Install”
11. Type in your password, click “OK”
Pacifist will begin to extract files.
12. In steps 8/10ß.... you also have the choice to “cancel”
Notes: Pacifist may find that a file it is installing already exists on the hard disk. Pacifist will present you with an alert panel....
• Stop
• Leave original alone
• Update .....
• Default selection
• Replace .... (Replace option should only be used on full install packages) -
Confirmation prompt when emptying trash
How can I get rid of the confirmation prompt when emptying the trash? (I'd like to keep it for deleting securely.)
The setting in the "Finder" preferences seem to apply to both regular "Empty Trash" and "Secure Empty Trash" and I don't know of a way to set the two independently.
However, note that holding down the "option" key (⌥) while emptying the "Trash" will allow the "Trash" to be emptied from the "Finder" menu and keyboard shortcut without the appearance of the dialogue. -
Interactive Terminal Window not giving username prompt
Hi,
Have an issue that began a few month's ago where users dialing into my AS5350 access servers (to authenticate) never get the username prompt in the interactive terminal window. We suspect an MS hotfix or something because the 5350's all check out, and using my home PC I do not experience problem (and I don't get force-fed the MS hotfixes either). Anyone experience a similar issue? We're running IOS 12.3 (14)T. TYKevin
I have seen that symptom on AS5350 using the interactive window to allow users to authenticate. I have also wondered if it were the result of a Microsoft "fix". I have discovered that if the user will hit enter that they then get the prompt (and if fact if they just type their userID and hit enter it will be accepted).
HTH
Rick -
Null and empty string not being the same in object?
Hello,
I know that null and empty string are interpreted the same in oracle.
However I discovered the strange behaviour concerning user defined objects:
create or replace
TYPE object AS OBJECT (
value VARCHAR2(2000)
declare
xml xmltype;
obj object;
begin
obj := object('abcd');
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
obj.value := '';
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
obj.value := null;
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
end;
When creating xml from object, all not-null fields are transformed into xml tag.
I supposed that obj.value being either '' or null will lead to the same result.
However this is output from Oracle 9i:
<OBJECT_ID><VALUE>abcd</VALUE></OBJECT_ID>
<OBJECT_ID><VALUE></VALUE></OBJECT_ID>
<OBJECT_ID/>
Oracle 10g behaves as expected:
<OBJECT><VALUE>abcd</VALUE></OBJECT>
<OBJECT/>
<OBJECT/>
However Oracle 9i behaviour leads me to the conclusion that oracle
must somehow distinguish between empty string and null in user defined objects...
Can someone clarify this behaviour?
Thus is it possible to test if object's field is empty or null?However Oracle 9i behaviour leads me to the conclusion that oracle
must somehow distinguish between empty string and null in user defined objects...
Can someone clarify this behaviour?
Thus is it possible to test if object's field is empty or null?A lot of "fixes" were done, relating to XML in 10g and the XML functionality of 9i was known to be buggy.
I think you can safely assume that null and empty strings are treated the same by Oracle regardless. If you're using anything less than 10g, it's not supported any more anyway, so upgrade. Don't rely on any assumptions that may appear due to bugs. -
Difference in Null and Empty String
Hi,
I have been wondering about the difference between Null and Empty String in Java. So I wrote a small program like this:
public class CompareEmptyAndNullString {
public static void main(String args[]) {
String sNull = null;
String sEmpty = "";
try {
if (sNull.equalsIgnoreCase(sEmpty)) {
System.out.println("Null and Empty Strings are Equal");
} else {
System.out.println("Null and Empty Strings are Equal");
} catch (Exception e) {
e.printStackTrace();
This program throws Exception: java.lang.NullPointerException
at practice.programs.CompareEmptyAndNullString.main(CompareEmptyAndNullString.java:10)
Now if I change the IF Clause to if (sEmpty.equalsIgnoreCase(sNull)) then the Program outputs this: Null and Empty Strings are Equal
Can anyone explain why this would happen ?
Thanks in Advance !!JavaProwler wrote:
Saish,
Whether you do any of the following code, the JUnit Test always passes: I mean he NOT Sign doesnt make a difference ...
assert (! "".equals(null));
assert ("".equals(null));
You probably have assertions turned off. Note the the assert keyword has nothing to do with JUnit tests.
I think that older versions of JUnit, before assert was a language keyword (which started in 1.4 or 1.5), had a method called assert. Thus, if you have old-style JUnit tests, they might still compile, but the behavior is completely different from what it was in JUnit, and has nothing to do with JUnit at all.
If you turn assertions on (-ea flag in the JVM command line, I think), the second one will throw AssertionError. -
Check for null and empty - Arraylist
Hello all,
Can anyone tell me the best procedure to check for null and empty for an arraylist in a jsp using JSTL. I'm trying something like this;
<c:if test="${!empty sampleList}">
</c:if>
Help is greatly appreciated.
Thanks,
Greeshma...A null check might not be you best option. If your requirement is you must have both the date and time component supplied in order to populate EventDate, then I would use a Script Functoid that takes data and time as parameters.
In the C# method, first check if either is an empty string, if so return an empty string.
If not, TryParse the data, if successful, return a valid data string for EventDate. If not, error or return empty string, whichever satsifies the requirement. -
Memory Problem with SEt and GET parameter
hi,
I m doing exits. I have one exit for importing and another one for changing parameter.
SET PARAMETER exit code is ....
*data:v_nba like eban-bsart,
v_nbc like eban-bsart,
v_nbo like eban-bsart.
v_nbc = 'CAPX'.
v_nbo = 'OPEX'.
v_nba = 'OVH'.
if im_data_new-werks is initial.
if im_data_new-knttp is initial.
if im_data_new-bsart = 'NBC' or im_data_new-bsart = 'SERC' or im_data_new-bsart = 'SERI'
or im_data_new-bsart = 'SER' or im_data_new-bsart = 'SERM' or im_data_new-bsart = 'NBI'.
set parameter id 'ZC1' field v_nbc.
elseif im_data_new-bsart = 'NBO' or im_data_new-bsart = 'NBM' or im_data_new-bsart = 'SERO'.
set parameter id 'ZC2' field v_nbo.
elseif im_data_new-bsart = 'NBA' or im_data_new-bsart = 'SERA'.
set parameter id 'ZC3' field v_nba.
endif.
endif.
endif. *
and GET PARAMETER CODE IS....
get parameter id 'ZC1' field c_fmderive-fund.
get parameter id 'ZC2' field c_fmderive-fund.
get parameter id 'ZC3' field c_fmderive-fund.
FREE MEMORY ID 'ZC1'.
FREE MEMORY ID 'ZC2'.
FREE MEMORY ID 'ZC3'.
In this code i m facing memory problem.
It is not refreshing the memory every time.
So plz give me proper solution.
Its urgent.
Thanks
RanveerHi,
I suppose you are trying to store some particular value in memory in one program and then retieve it in another.
If so try using EXPORT data TO MEMORY ID 'ZC1'. and IMPORT data FROM MEMORY ID 'ZC1'.
To use SET PARAMETER/GET PARAMETER the specified parameter name should be in table TPARA. Which I don't think is there in your case.
Sample Code :
Data declarations for the function codes to be transferred
DATA : v_first TYPE syucomm,
v_second TYPE syucomm.
CONSTANTS : c_memid TYPE char10 VALUE 'ZCCBPR1'.
Move the function codes to the program varaibles
v_first = gv_bdt_fcode.
v_second = sy-ucomm.
Export the function codes to Memory ID
EXPORT v_first
v_second TO MEMORY ID c_memid. "ZCCBPR1 --- Here you are sending the values to memory
Then retrieve it.
Retrieve the function codes from the Memory ID
IMPORT v_first TO v_fcode_1
v_second TO v_fcode_2
FROM MEMORY ID c_memid. "ZCCBPR1
FREE MEMORY ID c_memid. "ZCCBPR1
After reading the values from memory ID free them your problem should be solved.
Thanks
Barada
Edited by: Baradakanta Swain on May 27, 2008 10:20 AM
Maybe you are looking for
-
Itunes 10.5.3 update install errors on Windows
So if your getting errors when trying to update your Itunes software (say for instance to be able to use your new iPood Touch, required upgrade) and getting errors such as "A network error occurrred while attempting to read from the file C:\WINDOWS\I
-
Hi, I am trying to display data on a webpage from an RSS feed using a XSLT Fragment. I have managed to get it to work and display all the results, what I need to know is there any way I can limit the number of results shown on a page and add paging?
-
can anyone tell me why?it just say : Your Purchase Could not be completed Purchase Failed : Your Itunes version does not support this purchase, it was not installed correctly. or you're not sign into a itunes account. why? or i need to update latest
-
Can't use Target Disc Mode with Imac Indigo? help
So after holding off on buying a new imac for over 5 years I decide to pick one up. I restarted the intel imac in target disc mode. After doing that. My old imac gives me a message saying it can't read the contents of the hard disc connected through
-
The last update has squashed my apps!
Hi, I just updated my iPad 2 to iOS 7.0.3 and it looks like all the apps have been squashed upwards. There appears to be a gap between the bottom of the screen and the favourite apps which used to sit at the bottom. Help!