Username SID adm changed

Hi Friends,
One of our SAP servers OS login username has been changed from <SID>adm to <SID>admin.<xx>.<yy> as the server is migrated to a new domain.
I believe that OS login username should be <SID>adm on windows.I notice that all environment variables set for SAP and Oracle ealrier are now gone.
Do you think this change would cause severe problems for administration and should be changed back to <SID>adm.
Environment:
SAP 4.7EE
Oracle 9.2.0.5
Windows NT
Regards,
Basis Admin

The user get's normally a new SID (Windows unique identifier) when changing the domain.
As a result he will get a new HKEY_CURRENT_USER registry hive, nothing copied from the old one.
the easiest way to fix the system is:
run a homogenious system copy using the backup/restore option (nothing has to be done on restore, because the database is already there).
Peter

Similar Messages

Change password for Domain\SAPservice SID and sid adm user

Hi guys
During NW711 installation, Ii gave OS User password different with master password.
Now i would like to synchronise the OS User password with master password(DDIC/SAP)
How to change the password for below users
SAP System administrator <Domain>\<sid>adm
SAP System Service User<Domain>\SAPService<sid>
Appreciate immediate response.
regards

Hi,
If I am not wrong you system is installed in windows. You can change the password in the domian controller under users OU or you can ask your domian administrator to change the same. But, I would recommend not to do this as after chaging the password the sap system will not start and you need to update the changed password in all the places wherever the mentioned IDs are used. For eg. in SAP_<SID> service and SAPOSCOL service.
Also, if the installation is in cluster then need to be more carefull and see where all need to update the changed password.
Thanks & Regards,
Sharath

Can not change password of sid adm and ora sid

Hello Experts,
I have done a system copy of SAP ECC6.0.The target and the source system are on the same host.Hardware platform is HP-UX 11.31 and database is Oracle 10g.Both the systems are up and running now.
While target system installation, I gave the "master password"(password for all users) same as in the source system.
But when the target sysetm was installed, I found that <target sid>adm and ora<target sid> ,ddic passwords are not working.For J2EE_ADMIN, the password is working.
Please guide how to change ( or reset) the password of <target sid>adm and ora<target sid> without knowing the old password.
DDIC password I could able to change by logging into the system with SAP*
Please Help..
Anupam.

for
Please guide how to change ( or reset) the password of <target sid>adm and ora<target sid> without knowing the old password.
You need to login with root and then just type passwd sidadm and give the new password.Same you can do it for orasid.you can change it with root as it has administrator rights and will not ask for the old password.
Thanks
Rishi Abrol

Upgrade assistant Server error: your username is root, but must be SID adm

Hi GURU's,
I am working on "Combined Upgrade & Unicode Conversion" 4.6C ==> NW2004s
When starting Upgrade assistant and continuue with upgrade getting following error:
Server error: your username is root, bu must be <SID>adm
I have option to continue, or cancel
When I choose "Continue" Upgrade assistant disconects from Upgrade server
Has someone any idea, what is the reason, and how can I solve this issue.
PS: I have also tried to start upgrade with <SID>adm user, but the same error.
Thanks for your help in advance.

Hi,
The whole upgrade should only be executed using <sid>adm, not root. I suggest to re-run the upgrade using <sid>adm user.
Also ensure all files in /put directory have correct permissions.
Cheers!

OPS$ SID ADM password expire

Hi,
We are receiving warnings in system that our User OPS$<SID>ADM password is going to expire.
USERNAME EXPIRY_DATE PASSWORD
OPS$<SIDADM>ADM 12-JAN-11 EXTERNAL
As I understand User is Externally identified so I was expecting that if I change password of User <SID>ADM at OS level,
On database level OPS$ User should be Updated but it did not get update and still its expiry date is same.
So please suggest how can we change its password.
Shivam

Hi Shivam,
From SQL prompt execute the below command
SQL>update OPS$<SAPSID>ADM.SAPUSER set PASSWD='<new password>' where USERID='SAPSR3';
You can do the same from BRTOOLS also
Regards,
SBK

BRTOOLS errno 13 when logged in as user sid adm

Hi,
Just upgraded to 7.2 (14) BRTOOLS, Netweaver on Oracle/UNIX platform.
My brtools open when I'm logged in as ora<sid> user, however they fail with permissions on the Oracle directories when I try and run brtools as user <sid>adm.
I've verified the file permissions against a known working instance on the br files and they are matching.
The error I get is below, I know it must be file permissions somewhere, can someone advise, thanks.
hneccscd01s:s02adm 4% brtools
BR0651I BRTOOLS 7.20 (14)
BR0252W Function stat() failed for '/oracle/S02/saptrace/diag/rdbms/s02/S02/trace/alert_S02.log' at location BrFileStatGet-1
BR0253W errno 13: Permission denied
BR0273W Determination of file status for /oracle/S02/saptrace/diag/rdbms/s02/S02/trace/alert_S02.log failed
BR0252W Function stat() failed for '/oracle/admin/S02/adump' at location BrFileStatGet-1
BR0253W errno 13: Permission denied
BR0273W Determination of file status for /oracle/admin/S02/adump failed
BR0252E Function fopen() failed for '/oracle/S02/112_64/dbs/initS02.ora' at location BrInitOraRead-1
BR0253E errno 13: Permission denied
BR0158E Error reading Oracle profile /oracle/S02/112_64/dbs/initS02.ora
BR0280I BRTOOLS time stamp: 2011-08-26 15.01.42
BR0654I BRTOOLS terminated with errors
Cheers
Richie
SAP Basis

Hi Richie,
Are the environment variables properly set for <sid>adm and ora<sid>?
Try to see if the dot (.) profiles in the home directories of <sid>adm and ora<sid> are consistent.
Also, as ora<sid> recursively change the permissions for /oracle/S02/saptrace to 755 [chmod -R 755 /oracle/S02/saptrace]
Also check the permissions of brtools executables in the /sapmnt/<SID>/exe on the database server.
Normally, they should be something like shown below.
-rwxr-xr-x 1 <sid>adm sapsys 1578637 Feb 20 2011 brrestore
-rwsrwxr-x 1 ora<sid> sapsys 2303924 Feb 22 2011 brtools
-rwsrwxr-x 1 ora<sid> sapsys 4178065 Feb 24 2011 brarchive
-rwsrwxr-x 1 ora<sid> sapsys 4284895 Feb 24 2011 brbackup
-rwsrwxr-x 1 ora<sid> sapsys 5527676 Feb 24 2011 brconnect
-rwxr-xr-x 1 <sid>adm sapsys 4587371 Feb 24 2011 brrecover
-rwxr-xr-x 1 <sid>adm sapsys 5679668 Feb 24 2011 brspace
Br,
Venky.

When do i need to create SID adm user?

Hi All,
I am new to XI.I am trying to install XI on windows 2003 and sqlserver. I am done with the following without any error?
1. OS and its service packs
2. Sql Server and patches.
3.Central instance
4. DB instance
5. Installed sap gui.
I have logged in as administrator and installed the above stuff.
1. When do i need to create <SID>adm user?
2. Do i need to use <SID>adm to install the XI?
3. When i logged in to sapgui, i am getting host name error. Do i need to change hosts file?
Thank you
Ganges Leaves
Message was edited by: Ganges Leaves

Hi Ganges,
Pls have a look into this SAP Material
https://websmp209.sap-ag.de/~sapidb/011000358700009389172004E.PDF
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a5550de0-0701-0010-a8b4-9fd433a080f3
<i>4. When i logged in to sapgui, i am getting host name error. Do i need to change hosts file?</i>
>>> Just ping the IP address and check that are u able to connect. Also check with Browser .
Hope this helps,
Regards,
Moorthy

How to Login as SID adm in SAP Hana

Hi Experts,
i want the steps to login as <sid>adm user in SAP Hana studio and SAP Hana database.
So that i can start services and Stop services as well.
Below is the error messages i get by trying to change to <sid>adm that is s2padm.
Urgent help on the steps to login as <sid>adm to connect to studio and to be able to stop and start services.
Regards,
Justice

Hi Justice,
Check if this helps: http://help.sap.com/saphelp_hanaplatform/helpdata/en/c9/21e48bbb5710148124c0eeddab166d/content.htm?frameset=/en/50/b9056b780f4072a88237bbd2352cf8/frameset.htm&current_toc=/en/c8/aa369bbb57101497c4e0f9c1028266/plain.htm&node_id=19&show_children=false
http://help.sap.com/saphelp_hanaplatform/helpdata/en/bf/7b3028bb5710148dabc55a36240ee6/content.htm?frameset=/en/4c/d17057d2cd4888820666d1891b9836/frameset.htm&current_toc=/en/00/0ca1e3486640ef8b884cdf1a050fbb/plain.htm&node_id=15
The Admin Guide of HANA is extremely useful. The one on the help portal is for SPS08 but is still quite relevant.
Best

HT4305 Can you check my device is really one or fake? or some part in side was change?

Dear Someone who can sold out my Iphone problem
My Iphone was took the shop for run operator after that some days later it is happen is the operator system go down and need to restore
I can not understand what happen can you do check my iphone is realy one or some hardware in side was change
Many thanks

No one here can check anything ,we are all users like you
There are no Apple staff here that will reply to your positng

Default password for SID adm

The subject says it all - I am new to MaxDB, and did not install the application.
We are trying to update some tables, and get permission errors.
I have the SUPERDBA user, but that user does not have permissions on the <SID>ADM tables.
Is there a default password for the <SID>ADM database user?
I am probably missing something very easy here.

SAP customer - yes - I am reviewing the documentation - it leaves a lot to be desired
Here is the output you requested:
dbmcli on GRD>sql_execute select * from users
OK
END
'CONTROL';'';'CONTROL';'ADMIN';'MULTIPLE';(null);(null);(null);'DEFAULT';'20090218';'00160032';'20090218';'00160032';'20090218';'00160032';'GRD';'grc-app-dev01';0;'NO';(null)
'SUPERDBA';'';'SUPERDBA';'SYSDBA';'MULTIPLE';(null);(null);(null);'DEFAULT';'20090218';'00160032';'20090218';'00160033';'20090218';'00160032';'GRD';'grc-app-dev01';10;'NO';(null)
'SUPERDBA';'';'SAPGRD';'DBA';'MULTIPLE';(null);(null);(null);'UNICODE';'20090218';'00160045';'20090218';'00160045';'20090218';'00160045';'GRD';'grc-app-dev01';28;'NO';(null)
'SUPERDBA';'';'SAPGRDDB';'DBA';'MULTIPLE';(null);(null);(null);'UNICODE';'20090218';'00160052';'20090218';'00160052';'20090218';'00160052';'GRD';'grc-app-dev01';29;'NO';(null)
I'm not 100% sure what you are looking for on the second query, all I could get to work was this -
select * from tables
which gives a lot of output, here is some:
'SUPERDBA';'SUPERDBA';'ROOTS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B1';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'RUNNING_COMMANDS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B2';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'RUNNING_PARSEIDS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B3';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'SERVERDBSTATISTICS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000A1';(null);(null);(null);(null)

PI 7.1 can not deploy! ask for user SID adm and password

hi all:
    PI 7.1, NWDS 7.1
    I create a ejb project amd import a WSDL and generate java bean skeleton. after implementation, I choose the EAR project and right click and choose run RUN AS-->Run on server, then choose the server, add project and finish
then a popup window shows and tell me "Please enter the credentials of the SAP administrator <SID>adm", I use J2ee_admin but error occur:
Error while disabling debugging of the server
Error while disabling debugging of the server
Incorrect login information provided
I search the SDN and find no useful link. how to config <SID>adm ?
how to deploy my java proxy? i think this process is so complex!
thank you!

hi Prateek：
    thanks for your information.
   only ask for user and password, no other pop up window.
   i am confused is there any configuration missing?

XI Installation: invalid XI SAP sid adm password

During an initial XI installation on top of an ABAP + JAVA NW04 system. In the Java Deployment > Windows Domain installation step i am unable to enter the correct SAP <sid>adm password with below error message:
"Invalid password. DIAGNOSIS: The password you specified for user 'xi2adm' is wrong. SOLUTION: Enter the correct password."
In the sapinst_dev.log is the following:
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE      [synxcuser.cpp:517]
           bool CSyUserImpl::checkPassword(iastring sPassword) const
checking password of user xi2adm failed
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
Invalid password. DIAGNOSIS: The password you specified for user 'xi2adm' is wrong. SOLUTION: Enter the correct password.
Any insights would be greatly appreciated.

Vivian Liu,
   I am trying to install XI on Windows2003/sql server.
I have installed os/sp3/sqlserver/patches/Central Instance/Db instance.
I have used Administrator account to install this.
1. When do i need to create <SID>adm user?
2. If you have any installation notes with the sequence of steps, can you please send it to me at [email protected]
Thank you
Gangas Leaves

Bash shell for sid adm and ora sid user

I'm planning to make bash shell as the the default shell for my <sid>adm and ora<sid> user. Will there any issues? It seems harmless.
My current setups are ECC6 on top of AIX 5.3 and Oracle 10g
regards,
Marjan

The only problem is permission of user access to that bash shell. as well as what u u want to run i mean to say if it is any haevy erport or update insert or refresh functionality then do not run at the time of haevy load.
Thanks

ORA-12547 for rsh -l sid adm dbhost "brconnect -u / -f state"

Hi,
I have problem with db13 (PI711, kernel 720, Oracle 11.2.0.3) after split&migrate to linux.
BR0301E SQL error -12547 at location db_connect-2, SQL statement:
'CONNECT /' ORA-12547: TNS:lost contact.
but:
1. <dbhost>:ora<sid>$ "brconnect -u / -f brstate" work ok
2. <dbhost>:<sid>adm$ "brconnect -u / -f brstate" work ok
3. <ahost>:ora<sid>$ rsh -l <sid>adm "brconnect -u / -f brstate" work ok
4. <ahost>:ora<sid>$ rsh -l ora<sid> "brconnect -u / -f brstate" work ok
5. <ahost>:<sid>adm$ rsh -l <sid>adm "brconnect -u / -f brstate" not work
resume: error is link with rsh call brconnect under <sid>adm?
p.s. MPROTECT_TXT = ON set,
SUID & owner for br* set
SUID & owner for bin/oracle set
OPS$<SID>ADM checked
w/b/r
Vlad

Hi,
addinfo:
1. split&migrate&upgrade ORA10->11
2. <ahost>:<sid>adm$ ssh <sid>adm@<dbhost> "brconnect -u / -f brstate" work ok!
may be it's not worked in before to split&... - because rsh was not in use for br*
Regards,
Vlad

How dome change my password for my computer and my username apparently it changed because i was moving things from my old mac

How dome change my password for my computer and my username apparently it changed because i was moving things from my old mac

If your forgot the administrative PW for the computer reset the PW
OS X: Changing or resetting an account password
OS X Lion>: How to Easily Reset the Administrator Password

Username SID adm changed

Similar Messages

Maybe you are looking for