Users accessing only their applications

27-Jun-12
Good Morning,
We're running WebLogic Server Version: 10.3.4.0. We have numerous users as well as numerous applications. Is it possible to set up the users so they only have access to their respective applications? We'd like to avoid a user inadvertently deploying a file to the wrong application, or worse, inadvertently deleting the wrong application.
Thanks for your time and consideration!

Hi
Do you mean from Deployment Point of View like for Adminstrators. Each Admin can deploy/undeploy only his or her application. I doubt if this is possible. You can control admin privileges at high level and at specific areas. There are Groups like Monitors, Deployers etc. Monitors groups means users in this group can only get READ ONLY access to full admin console. They cannot do anything else. Deployers can do only deployment. BUT you cannot control specific applications to be deployed by specific admin user. If this is your exact requirment, I really doubt this may not be possible.
From the end user point of view, they can only access the applcations. They cannot deploy/undeploy or modify any files. Your first lines of question were little confusing.
Thanks
Ravi Jegga

Similar Messages

  • Restricting Multiple Users To Only Their Specific Areas Of A Site

    I think I understand the basics of user authentication and
    password protection for areas of a site using PHP/MySQL, etc. Maybe
    I don't however.
    My question is: If I have 10 users how do I restrict each
    user to only their specific pages in the site so that they can only
    see their specific pages and not every protected page?
    See, maybe I don't understand, but any help would be
    appreciated. Thanks in advance.
    Glenn Atkins

    Can you password-protect individual folders, each containing
    only a single
    user's pages?
    "GEAtkins" <[email protected]> wrote in
    message
    news:fj4gel$1sh$[email protected]..
    >I think I understand the basics of user authentication
    and password
    >protection
    > for areas of a site using PHP/MySQL, etc. Maybe I don't
    however.
    >
    > My question is: If I have 10 users how do I restrict
    each user to only
    > their
    > specific pages in the site so that they can only see
    their specific pages
    > and
    > not every protected page?
    >
    > See, maybe I don't understand, but any help would be
    appreciated. Thanks
    > in
    > advance.
    >
    > Glenn Atkins
    >

  • Looking for Suggestions on granting all users access to an application *except a subset of users*

    This might not be the right forum for this question, but since it is related to an App-V application I figured I would try since this may have come up for some of you.  I am looking for the best way to grant all Domain Users access to an application
    except for Domain Admins.  Using the Full App-V infrastructure, I want to grant access to the App-V UI via User Targeting, but I don't want to allow Domain Admins access.  The reason for this is because when we make updates to provisioned
    server cores (stateless), we login with our Admin accounts to make modifications to the cores, and I would like to reduce the steps that need to be taken at the end to ensure that all AppV applications are removed before sealing up the core. 
    Currently, Domain Admins do not have access to any App-V applications, so this process is fairly clean.  All applications are User Targeted. 
    Packages are cached on a persistent D drive on each server, so the issue is that the registry, programdata, and packageinstallationroot become out of sync if packages are pulled down during core modifications after the core is attached to other servers (hence
    other D drives).  Because of this, Machine Targeting is not an option for this either.
     

    This would be so much easier with a "Configuration Manager" like feature where you could create a collection query to accomplish the same thing.  Are there other tools out there that will do the same thing?

  • End user - Access denied by application security check

    Hello all,
    Being a new Apex developer, I'm really hoping someone can point out the magic solution to this problem. I have just created my first Apex application and have only 3 end users who will be using it. I create their username and passwords as the admin and everything is fine, until they try to log on. That's when I get the Access denied... error. However, if I switch them from an end user to a developer, they are magically able to log in and access the application (as a developer obviously). I should mention they are internal users and have internal account credentials, so it shouldn't be this difficult.
    This is particularly maddening because I have tried every combination of authorization and authentication I can think of. I am at the point where there is no authorization scheme and it still won't let them in.
    Searching through the forums, I've come across threads that mention this error when an Admin tries to log on, but not an end user.
    If anyone has ANY ideas, it would be most appreciated.
    Thanks,
    Ben

    Hi,
    What URL have you given to the users to gain access to the application. Are they trying to access it via the developer login?
    What version of APEX/oracle are you using.
    APEX using embedded PL/SQL gateway should look something like this
    http://hostname:port/apex/f?p=101 where 101 is the application id
    APEX using Apache
    The URL should look something like this
    http://hostname:port/pls/apex/f?p=101 where 101 is the application id
    Regards
    Paul

  • Multi user access in Single application file

    Hi,
    Is it possible to work Single application but multi-user access in Indesign CS6.
    If yes, Please let me know how to access.
    Thansk,
    Uvaraj S

    I'm not sure exactly what you are asking. InDesign files can be edited by only a single user at one time, but any user can open a file not already in use.

  • How to find out total of number of users accessing Hyperion Planning applications ?

    Hi All,
    Could someone help me with the details of how to find out total number of users who are accessing Hyperion Planning application in Env.?
    This is with regard to licenses so wanted accurate and unique information,
    Thanks
    Amith

    Hello Amith,
    I think you should have a look at the blog of Cameron Lackpour http://camerons-blog-for-essbase-hackers.blogspot.be/
    In the "Shared Services Stupid Trick" blogs, he shows how to find the real access to an application. The side benefit is that it is amusing to read.
    In how far this is OK for the licenses is written on another page. You likely need to use the same method as Oracle does. Ask the Salesperson how to do this. (I am curious what his/her reply is).
    Regards,
    Philip Hulsebosch.

  • How to restrict user access in Oracle Application Server 10g (9.0.4)?

    Can anybody please let me know how to restrict user access in 10g AS? To be specific, how to allow http requests from specific IPs only?

    Hi,
    You have to edit httpd.conf and modify acces rights for each protected directory
    e.g.
    <Directory /var/www/sub/payroll/>
    Order allow,deny
    Allow from 192.168.1.0/24
    </Directory>
    then you have to restart Oracle HTTP Server
    jm--

  • END USER accessing only the Output of report

    Hi,
    I'm creating reports based on queries, right now we are planning to give view access to end users, but my doubt if end user hits view on the report the query runs everytime and produces the report, what I want to achieve is that the we schedule the report before night and end user will only view the PDF output the query produces by the scheduling, How can I achieve this?

    So do we need to give the user access to schedule button as well? and Do you mean run report online option?
    Any update please?
    Edited by: user8937215 on Aug 5, 2010 7:55 AM
    E

  • User access only to a specific page

    I have create a page group with others pages.
    I create a user who want to have management rights only to a specific page of the portal, and anywhere else
    How can i give access only to a specific page?
    thanks

    Try this :
    1. Edit the page
    2. Click "Access" in the banner at the top of page.
    3. Under "Access Settings" select "Specify Access Settings"
    4. Enter the username into the "Grantee" text box
    5. Select "MANAGE" from the drop down box of permission levels
    6. Click "Add"
    7. Click "Apply"
    8. Click "Clear Cache" to activate the changes
    9. Click "Ok" to return to the page.

  • Custom Code to fetch details of  Users access on an application from OES

    Hi All,
    I am writing a custom code, which will fetch access details(entitlements a user have) of users for an application from OES. I will run this code on my local machine.
    For this i have included jars like oes-client.jar and others in my project. But when i am excecuting from my local machine, i ma getting below exception:
    java.lang.NoClassDefFoundError: org/eclipse/persistence/internal/weaving/PersistenceWeaved
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClassCond(Unknown Source)
         at java.lang.ClassLoader.defineClass(Unknown Source)
         at java.security.SecureClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.access$000(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at oracle.security.jps.internal.core.datamanager.DataManagerFactoryImpl.getDBDataManager(DataManagerFactoryImpl.java:204)
         at oracle.security.jps.internal.core.datamanager.DataManagerFactoryImpl.getDataManager(DataManagerFactoryImpl.java:103)
         at oracle.security.jps.internal.core.datamanager.DataManagerFactoryImpl.getDataManager(DataManagerFactoryImpl.java:89)
         at oracle.security.jps.internal.credstore.rdbms.CsfDbmsManager.getDataManager(CsfDbmsManager.java:77)
         at oracle.security.jps.internal.credstore.ldap.CsfStoreManager.existsStore(CsfStoreManager.java:183)
         at oracle.security.jps.internal.credstore.ldap.CsfStoreManager.completeInit(CsfStoreManager.java:146)
         at oracle.security.jps.internal.credstore.rdbms.CsfDbmsManager.<init>(CsfDbmsManager.java:72)
         at oracle.security.jps.internal.credstore.rdbms.CsfDbmsManager.getInstance(CsfDbmsManager.java:59)
         at oracle.security.jps.internal.credstore.ldap.CsfStoreManager.getInstance(CsfStoreManager.java:90)
         at oracle.security.jps.internal.credstore.ldap.LdapCredentialStore.<init>(LdapCredentialStore.java:105)
         at oracle.security.jps.internal.credstore.ldap.LdapCredentialStoreProvider.getInstance(LdapCredentialStoreProvider.java:134)
         at oracle.security.jps.internal.credstore.rdbms.DbmsCredentialStoreProvider.getInstance(DbmsCredentialStoreProvider.java:68)
         at oracle.security.jps.internal.credstore.rdbms.DbmsCredentialStoreProvider.getInstance(DbmsCredentialStoreProvider.java:46)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
         at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
         at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:159)
         at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:165)
         at oracle.security.jps.openaz.pep.PepRequestFactoryImpl.<init>(PepRequestFactoryImpl.java:123)
         at oracle.security.jps.openaz.pep.PepRequestFactoryImpl.getPepRequestFactory(PepRequestFactoryImpl.java:113)
         at com.capgroup.iam.authorization.policysimulator.service.EntitlementServiceImpl.<init>(EntitlementServiceImpl.java:37)
         at com.capgroup.iam.authorization.policysimulator.service.QueryCont.<clinit>(QueryCont.java:47)
    Caused by: java.lang.ClassNotFoundException: org.eclipse.persistence.internal.weaving.PersistenceWeaved
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         ... 35 more
    Exception in thread "main" .
    Please tell me if am missing any jar or what.
    TIA

    No luck yet :(.
    Any one have idea on this.

  • Multiple users accessing single application in HTML DB 2.1 with XE

    Hi,
    I am struggling to setup an application in HTMLDB 2.1 on XE.
    I would like multiple users to be able to access the same application. I have created the application and the users but now I need to give the new users access to the application.
    Can some highlight how to do this? Is it with authorisation schemes?
    Thanks
    Joel.

    Joel,
    Have you reviewed the XE documentation on Managing End Users?
    http://download-west.oracle.com/docs/cd/B25329_01/doc/appdev.102/b25309/wrkspc.htm#CHDDFDCH
    Sergio

  • User Access Security

    I would like to restrict a user to access only one application. I do not want that user to access the rest of the applications.
    How can I achieve this ?
    Thanks.

    Shreya - Read up on authorization schemes in the user guide. Normally, it's not users that carry the restrictions (User ABC can only run App XYZ) but applications that define who can run them (Users in list ... may run me).
    Scott

  • How to popup a msg from Oracle to all appl users logged in the Application

    Hi All,
    We are using Forms/Reports6i and database oracle9i
    Does Oracle provide any message broadcast method to send messages to the Application users which are currently using the application.
    If not then how it will be performed.
    Suppose we have to send some server maintenance messages to all users so only all application users who are logged in to application must get these messages.No other users.....
    For Example: 1 Server and 200 Application Users logged in..I want to send any message in oracle to all of them after they are logged in the application.
    Advance Thanks

    no - you have to wait till the next forms release. there you can do it
    in between you have to work with timers, which query in the db, if there are new message for the user. build a news-table where you look into. Or build an AQ and write get-functions in db-packages, which you use in forms 6i for reading in the AQ.
    but don't use (if possible) this timers in the web, because your performance will have problems then

  • The user has denied all applications access to their media

    OK, so I have had this problem before and solved it unknowingly and now it is reoccurring!
    "error:
    Error Domain=ALAssetsLibraryErrorDomain Code=-3312 "Global denied access" UserInfo=0x169aa0
    {NSLocalizedFailureReason=The user has denied all applications access to their media.,
    NSLocalizedRecoverySuggestion=This setting can be changed in Preferences.,
    NSLocalizedDescription=Global denied access}"
    Please NOTE://I do not get this issue in the simulator - my code for iterating assets works perfectly on the simulator.
    Surely this is an easy fix but be damned if I can find anything under 'Preferences' anywhere that assists.
    Please halp!

    - Location services must be enabled for the application...
    I realise that there is geotagging involved but what a joke!

  • ADF: Read only user access to application role on BTFs

    Hi,
    My JDeveloper version is 11.1.1.5
    I am trying to create read only users in my adf application. But I am unable to give read only permissions to the user on bounded task flows/ .jssf page which have editable tables and forms.
    I have searched for the information, I did not find any solution.
    Could some one please help me?
    Many thanks in Advance
    --Anil
    Edited by: 977652 on Apr 5, 2013 6:50 AM

    If you are using ADF BC, you can protect fields at EO level or protect the entire EO (check the security tab). The frontend will then render fields as read-only if your user is only allowed read permissions.
    If you are not using ADF BC, you can implement a custom resource permission as described here (ignore the fact that this is for an entity, the principle remains the same) http://www.oracle.com/technetwork/developer-tools/adf/learnmore/76-insert-update-entity-protection-334421.pdf
    You must then add an el expression to each fields readOnly attribute or you can implement a phaselistener that traverses all fields enclosed within a form and make them readonly.

Maybe you are looking for