Users are prompted for session password

Password authentication is disabled in my remote control policy, but when port 5950 is scanned by our friendly network security team users are prompted to enter a session password. Is there any way to disable this pop-up?
Screenshot:
session password prompt - Minus

etotman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

  • I tried downloading adobe flash but it prompts for a password, which i don't have. any suggestions?

    i tried downloading adobe flash but it prompts for a password. none of the passwords i have (including that which i use with apple) works. any suggestions?

    You are prompted for a password before installing Flash? If so, this is your Mac's admin password, which doesn't have anything to do with your Apple ID unless you chose to use the same password for your computer admin login account as is used for your Apple ID.

  • Exchange 2013/2010 Co-existance Outlook Users Always Prompted for Password

    Hello,
    We are in the process of attempting to migrate to Exchange 2013, but during the migration time, we need to coexist with the two versions.  Our outlook clients are a mix of Office 2007, 2010, and 2013.  When a user is migrated from 2010 to 2013,
    they start getting prompted for their password in Outlook every few minutes.  They can click cancel and continue working, but they continue to get prompts for their password.  If they click the update folder button in outlook, it updates fine, and
    the password prompt goes away for awhile. 
    Most topics on this state that this is caused by a certificate issue.  We have an internally deployed CA, with the Root certificate trusted by all clients.  The exchange 2013 server has a certificate that was created by this CA.
    I believe that this is caused by OAB (address book) still being hosted on the Exchange 2010 server (with a self signed cert), that is causing the connection to fail.  Is there anyway to test this without breaking outlook connections for the users that
    are on Exchange 2010?  Or is there any other reason that this would occur?
    Thanks for any assistance.

    Sorry for taking so long to reply, other items came up that rank higher then this migration.
    I ran the Test-OutlookWebServices CMD and got this result:
    [PS] C:\Windows\system32> Test-OutlookWebServices
    Source                              ServiceEndpoint                    
    Scenario                       Result  Latency
    (MS)
    EXCHANGE13.company.local           exchange10.company.local           Autodiscover: Outlook Provider Failure     229
    EXCHANGE13.company.local                                              
    Exchange Web Services          Skipped       0
    EXCHANGE13.company.local                                              
    Availability Service           Skipped       0
    EXCHANGE13.company.local                                              
    Offline Address Book           Skipped       0
    I
    am currently thinking that this may be the error.  Is there a way to
    change the first failing result to the hostname of the
    exchange13.company.local without breaking the current settings for the
    exchange10.company.local autodiscover?

  • After Migrating To Exchange 2013 All Outlook 2010 Users Constantly Prompted For Password (BUT OUTLOOK WORKS).

    I have two servers.  One is Exchange 2010 and the other is Exchange 2013.
    Three of our users had mailboxes on Exchange 2013 for the last few weeks with no problems.  They used Outlook 2013 and Outlook 2010.  After moving the rest of our ~25 users to Exchange 2013 the users with Outlook 2010 began to be prompted for their
    password constantly.
    They try entering it and it immediately reappears.  
    The odd thing is it shows connected and they are able to send and receive emails correctly.  
    I've tested our exchange connectivity using www.testexchangeconnectivity.com and all is well there.
    I'm not really sure what's going on.
    Any help is appreciated.  
    Luke
    Thanks, Luke Pickard

    This can appear if Outlook clients are trying to connect to OAB virtual directory, and don't succeed for some reason. Mailbox and mailflow will work, but password prompt will appear when Outlook tries to contact OAB. Try to investigate in that direction.
    Also, perform Outlook Configuration test (right click Outlook icon in task bar while holding CTRL and select Test email autoconfiguration.
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir

  • 10.5.8 Safari in new user accounts is asking for session password

    Hi,
    Since I upgrade the server to 10.5.8, Safari is asking for session password (login.keychain) when a user first log in and goes on the web. Deleting the login.keychain on the server template doesn't help much since Safari is complaining that there is no keychain and ask to rebuild it.
    If I try to reinitialize the keychain in the user account, I must enter the _template password_.
    How can I get Leopard to create a new login.keychain for Safari everytime a new user login?
    Funny I did not get this problem in 10.5.7
    Actually, should I just get rid of Safari and force everybody to use Firefox to avoid future problem? As a tech, I met very few issues with Firefox compare to Safari.
    Thanks

    Was able to solved this issue by creating home folder for the user from WGM.

  • After jumpstart host doesn't prompt for root password

    Hiya gang,
    I am migrating my jumpstart functionality to a new server and while it would appear that 100% of things are identical on both (as far as my /jumpstart tree is concerned), when I jumpstart a host (V240, in this case, but I've seen it on a SunBlade 150 too) everything appears to go well, but after the host reboots at the very end and I attempt to log in on console as root I am not even prompted for a password.
    I've booted to single user over the net and on the disk that was just jumpstarted I see what would appear to be a normal Solaris system. There are no indications that I can find of why it wouldn't prompt for password at all, and I'm not well enough versed with the way the login functionality works to know why this is.
    My new jumpstart server is running Solaris 10 (08/07), and I'm trying to jump a host with the same version. The very same jumpstart using my old jumpstart server works just fine.
    Thanks in advance,
    pb

    Darren,
    Thanks for your reply. It got me in the right frame of mind for troubleshooting :)
    I set up pam debugging for pam_ldap and got the following messages in /var/adm/messages:
    Aug 29 10:13:46 testfoo login: [ID 293258 auth.warning] libsldap: Status: 2 Mesg: Unable to load configuration '/var/ldap/ldap_client_file' ('').
    Aug 29 10:13:46 testfoo login: [ID 562097 auth.alert] open_module: Owner of the module /usr/lib/security/pam_mkhomedir.so is not root
    Aug 29 10:13:46 testfoo login: [ID 487707 auth.error] load_modules: can not open module /usr/lib/security/pam_mkhomedir.so
    Aug 29 10:13:46 testfoo svc.startd[7]: [ID 694882 daemon.notice] instance svc:/system/console-login:default exited with status 1
    Aug 29 10:56:51 testfoo su[3209]: [ID 105162 auth.alert] open_pam_conf: Owner of /etc/pam.conf is not root
    Aug 29 10:57:49 testfoo login[1225]: [ID 105162 auth.alert] open_pam_conf: Owner of /etc/pam.conf is not root
    ...so, I checked them out and /etc/pam.conf and /usr/lib/security/pam_mkhomedir.so are both owned nobody:nobody, which smelled like an NFS issue since both of those files are copied over to the hosts as part of a JASS_FILES variable, but during the finish script execution (they're copied by install-templates.fin). So, I did some digging there and found another Sun forum thread that had info on it:
    http://forums.sun.com/thread.jspa?forumID=841&threadID=5100999
    ...so I made the requisite change to /etc/default/nfs (setting the max version to 3) and the next jumpstart I tested worked perfectly, password prompt and all. All files that were previously owned nobody:nobody had the correct ownership this time around.
    Crazy!
    Thanks again Darren for your input!

  • I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects.  What am I missing?  Can I only use it via a non-password-protected wifi connection?

    I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects.  What am I missing?  Can I only use it via a non-password-protected wifi connection?

    Hi - you might want to post this question on the Apple TV area - you would probably get a quicker response - if you have a specific question relating to Apple routers then post back here

  • ICloud has my old Apple ID and is prompting for a password, but I want to put in the new id, I can't because it is grey and there is no edit option.  I'm prompted for a password to an account that doesn't exist

    iCloud has my old Apple ID and is prompting for a password, but I want to put in the new id, I can't because it is grey and there is no edit option.  I'm prompted for a password to an account that doesn't exist.  Anyone know what I can do to fix this or why this is happening.?  I had no issue putting in my new Apple ID everywhere else, I could sign out of the old and inactive account and then sign back in using my new and proper one.  However, after the update to 7.3 it did a whole welcome to yr iPad and a set up thing and it went to set up iCloud and had my old Apple ID in grey where I can't change or edit it, it wants the password, when I put in the old password, it say yr Apple ID is incorrect but yet it won't let me change it??????? Anyone???

    Sign out and back into your apple id from Settings>iTunes and App stores>(Your apple ID)>Sign Out and then sign in again with the new address. Close app store from running in the background (or restart the phone if your unsure how to do this). If when trying to update any apps they are still asking for the old apple ID, delete and re-install those apps.

  • Not all users are displayed for log on after a reboot or startup...

    Problem summary: Not all users are displayed for log on after a reboot or startup...
    This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
    To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
    If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
    The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
    Has anybody else experienced this problem with Yosemite?
    Cheers,
    David.

    David,
    Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
    FileVault has to be On.
    To Enable the users to be able to unlock FileVault Go to:
    System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
    Hope that helps,
    Weston
    Supporting Articles,
    OS X: About FileVault 2 - Apple Support

  • I am trying to update my apps. When it prompts for my password my old deleted email address comes up. I don't even rember the password for that old email. How can I get to update my apps with my current email?

    I am trying to update my apps. When it prompts for my password my old deleted email address comes up. I don't even rember the password for that old email. How can I get to update my apps with my current email?

    All apps are tied to the Apple ID they are purchased with and is not transferable.
    Delete app and download app with your new Apple ID.

  • IPhone4 keeps prompting for email password?

    My iPhone4 keeps prompting for email password. I continue to re-enter but I continue to receive msg prompt. Help?

    More than likely that is a Yahoo issue. Their mail accounts are historically bug ridden when operated in the mobile environment. Good luck.

  • How many concurrent users are allowed for an Azure Virtual Machine?

    How many concurrent users are allowed for an Azure Virtual Machine?
    Please share the details with the Azure VM size. Currently I have Standard VM of size D13(4 cores, 28GB RAM)

    Hi SanPSK,
    Thanks for posting here.
    I suggest you to check this article for Azure VM size
    https://msdn.microsoft.com/en-us/library/azure/dn197896.aspx
    For the concurrent users on VM - A maximum of 2 concurrent connections are supported, unless the server is configured as a Remote Desktop Services session host.
    Girish Prajwal

  • How can I set my iphone to prompt for a password when viewing a selected email account?

    I can see a lot of people complaining about adhoc password entry when using email but nothing where people actually want to be prompted for a password.  If I have multiple email accounts and a phone where others can pick up and enter the top level security 4 digit number, I would like one of the email accounts to be slightly more secure than the others, hence need it to prompt for a password.  Does anybody have any ideas how I can do this?

    Sorry, there is no way to do this in the current iOS. Suggest such to Apple here:
    http://www.apple.com/feedback/iphone.html

  • Since upgrading to iOS 6 I am not getting prompted for my password when I update apps. Why is this?

    When I updated apps on my ipad2 and iphone4S I used to get prompted for my password within a certain time.  So I could update a couple and then 10 minutes later if I wanted to download or update something else I would need to put in my password again. Since I upgraded to iOS6, I don't believe I am prompted for my password the same amount of times. I updated an app this am after not using iPad through the night and it just updated, no password required. This has me concerned now because sometimes I bump buttons by accident and now I will be charged for these accidents. What has happened to Apple's brilliant security?

    They've changed it in iOS and updates (and updates ONLY) do not require a password since it is really unnecessary as they have it on record that you were the one who bought the app. Why is more security needed, you aren't going to be charged for anything?
    Next time you update and app go to the App Store and try to buy something. You will be asked for your password.

  • The permission granted to user "Domain\user" are insufficient for performing this operation(rsAccessDenied)

    Hello All, 
    I believe this is a very frequently-asked question in SSRS, maybe the more famous one. For many times, I solved it for others.
    But today, I spent one afternoon on this issue, unresolved. 
    My environment: SSRS 2008R2, DB in local default instance(SQL2008 R2)
    My windows account and one of my service accounts(launching my SSRS) are both in local admin group. 
    After configuring the  SSRS, in local server, open IE(run as administrator, using my domain service account) to access "http://localhost/reports". It pops this error: 
    The permissions granted to user 'Doamin\myServiceAccount' are insufficient for performing this operation. (rsAccessDenied)Get Online Help
    Going back to my desktop, Open IE using my windows account to access "http://servername/reports", seeing the the same error and saying my windows account doesn't have sufficient permission on that server
    On Server side, use SSMS to connect local report service, and try to check who is in "system administrator" in SSRS instance, it pops up the error as below, 
    The permissions granted to user '' are insufficient for performing this operation. (rsAccessDenied) (Reporting Services SOAP Proxy Source)
    If using IE to reach "http://localhost/reportserver"(Web Service page), both my windows account and service account work--it doesn't complain anything. 
    Checked all things I know, still seeing this error. Notice my windows account and my service account are both in local admin group.
    Anyone can share some thoughts on this?
    Derek

    Figured out finally.
    In rsreportserver, we put in our custom code of security control as below.
    <Security>
                    <Extension Name="Windows"Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization,
    Microsoft.ReportingServices.Authorization"/>
                      <!--<Extension
    Name="Windows" Type="XXX.ReportingServices.Authorization.Authorization, XXX.ReportingServices.Authorization"/>-->
                </Security>
    When I flipped it back to native mode, it works. 
    Thanks all your replies.     
    Derek

Maybe you are looking for