Users as other task owners are receiving 5 emails notification for the same task

users as other task owners  are receiving 5 emails notification for the same task in Sharepoint 2010. I have tried to add a 5 minutes delay on the other task owners workflow with no luck.any suggestions? Thanks

The Book confuses me. I still think assignment delay and leveling resources are the same. Here is the explanation from the book for the three concepts.
" Project offers two types of delays:
Leveling delay. This type of delay applies to tasks; it pushes out the start date for the task and all its resource assignments. It’s meant specifically for remov-ing resource overallocations. With the Leveling Delay field, you can remove
all leveling delays by choosing Resource➝Level➝Clear Leveling.
Assignment delay. This type of delay applies to a single assignment within a task. Suppose you have a security consultant coming in to help lock down your site. However, your employees have prep work to do before the consultant can get started.
You can assign everyone to the same “Try hacking into office” task but delay the consultant’s assignment by 5 days. "
After a couple of pages;
" Leveling Resources
In Project 2010, you can level the entire project, tasks you select, or a single resource. By leveling several tasks that are all vying for the resource, or alternatively, leveling only the most in-demand resources, you can focus on the problematic
portions of your project. Project automatically chooses popular settings in the Resource Level-ing dialog box. In most situations, you might as well run Resource Leveling with these settings. You can undo the leveling if you don’t like the results, but you
can get some clues from the initial results to help you determine the settings you need. Here’s how to level different parts of your project using the leveling settings cur-rently in place:
Level a resource. Select the resource you want to level, and then choose Resource➝Level➝Level Resource"

Similar Messages

  • I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.

    I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.

    Is it possible that the person who sent the message to your phone sent it to your phone # instead?  Try sending a message to your phone via the email address and see if it shows up on the iPad.

  • Email Notifications for both UWL Tasks and Collaboration Tasks.

    Hello,
    I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
    Could any one please give me the configuration steps.
    Thanks in Advance.
    Regards,
    Sridhar.

    Hi sri,
    Refer the following threads
    https://www.sdn.sap.com/irj/scn/thread?threadID=147316
    https://www.sdn.sap.com/irj/scn/thread?messageID=315715#315715
    https://www.sdn.sap.com/irj/scn/thread?messageID=1170132#1170132
    Regards,
    P.Manivannan

  • Not receiving email notifications for threads watched

    i am not recieving email notifications for the threads watched. my email address is [email protected] also can i change my email address to [email protected]

    No email notifications for me since august 4th. Checked my junk mail settings. Still no notifications.
    Any progress?
    --pat                                                                                                                                                                                                                                                                       

  • When someone modify the coding in the notification, a new notification with the same task is created (QM02)

    Hi,
    When someone modify the coding in the notification, a new notification with the same task is created (QM02).
    How to stop this duplicate notification?
    Regards,
    Shiva

    Hello Shivasharanappa,
    This is due to your Inspection type configuration. I guess "One Q-Notification per Insp. Lot" Indicator is not set for the inspection type you are using.
    Go to QCC0>Quality inspection>Inspection Lot Creation>Maintain Inspection Types>Select Inspection type
    Here, Set indicator for "One Q-Notification per Insp. Lot". If this indicator is set system will combine all newly added defects into previously created notification.
    Amol.

  • Why are there two prices for the same audiobook?

    Why are there two prices for the same audiobook in iTunes?

    May be one is abridged and one unabridged ? or they just may want to get the suckers that think the more expensive one is better ... haha.

  • Email Notification for Forwarded Workflow task

    Hi all,
    Is there a way to trigger an email notification for a Forwarded Workflow task?
    That is when we forward a task from my SAP inbox to another SAP user's inbox by clicking on the fwd button, there is no email notification generated to the user notifying that a task has been forwarded to him/her? We have to manually send an email to the person notifying that I have fwded a task in his inbox.
    Maybe something in SWNCONFIG...
    But what?? not sure... We currently use RSWUWFML2 ...
    Thanks
    Abhi

    Hi Mike
    Thanks for the quick Reply.
    Have been lookking at SWNCONFIG and not sure how to accomplish it...
    Do we have to add a new parameter on the general settings tab ? Is there a SAP delivered Parameter (setting) with a value??
    Any input would be highly appreciated to point us in the right direction?
    Thanks
    Abhi

  • Email notification for the Activity Person Assigned

    Hi,
    I have a query from my client. They want to know the possibility of sending an email notification to the Person Assigned to an activity. Once the activity is REL, system should be able to send email (Outlook email or SAP mail) having the task details to the Person Assigned to that activity.
    Any suggestions/inputs are welcome.
    Best Regards,
    Mohammed

    Hi,
    You have to go for a ABAP development that trigger uppon activity REL.
    Thanks & regards,
    SL

  • Not receiving email notifications for 30 minutes

    HTC DROID Incredible HTC
    My phone did some software update and wiped out my phone.  I have since reset everything however having problems with my POP e-mail, which is AOL.  When it gets an e-mail, the phone does not say so for at least 30 minutes.  If at home  have to keep my phone on and logged in to my e-mail so I can see when I get an email because the phone is not telling me right away.
    From the phone, I go to my mail box and the hit menu --> more --> settings --> send and receive.  It's set up like this:
    Mail size limit:  no limit
    Set download frequency: every 5 minutes. 
      **When I click on set download frequency it's set like this:
              Peak time days:  every day
              Peak time start 6:00 am
              Peak time end 11:59 pm
              Frequency:  Peak times every 5 minutes
              Off Peak times every 5 minutes
    Dowload options: Bt days:  Today's
    Just now I received an email at 10:55 am howvere the phone did not tell me until 11:35 a.m.
    Please help!  And use simple terms and directions, please!

        Hi silvergal,
    i know the importance of receiving emails in a timely manner to the device. I went through the details on the HTC Incredible and found that the additional POP3 email accounts aren't visible through Accounts & Sync. They're only available on the option for Mail as you described you're following. There are two additional settings we need to check in the device. Please go to Settings -> Accounts & Sync and verify both Background data and Auto-sync are checked on. These ensure the device is set to allow the sync to be working properly. I also suggest you confirm there aren't any battery management or task killer apps installed. These may prevent the full function of syncing and would need to be completely removed from the Google account to stop the impact. Please update us on these settings and apps.
    Thank you,
    MariaC_VZW
    Please follow us on Twitter @VZWSupport

  • Not receiving email notifications for content I'm following

    Hello,
    A couple of days ago, I wrote a question about email notifications and now I understand them. I've been replying to a lot of questions but have recently noticed that I'm not receiving notifications when someone replies to my posts. When I ask questions I get notifications when somebody has written a reply but don't get notifications when somebody replies to my answer. I have email notifications turned on.
    Help would be much appreciated.
    Thanks

    Niel replies as if it is happening to him too - as it is to me - 16 days is on the money. I have an active AppleCare trouble ticket passed to the Community Hosts who have given it their own ticket number - I have reported all that I learn or observe to them.
    The workaround in the meantime is this WorkFlow:
    Click Reply
    scroll to the top of the thread - you will notice that the check mark is "Follow" - it used to be Following after the  progress bar finished 'posting' the reply
    Click the check mark or the word Follow
    Click Following
    Click Follow - this should leave the state of the tool as "Following"
    You are now TRULY Following the thread and will receive email notices as before.
    This only happens to some AppleIDs, so apparently the Hosts/Technicians are having a hard time finding the "insect-like" anomaly
    ÇÇÇ

  • Data collection was switched from an AI Config task writing to an hsdl file to synchronized DAQmx tasks logging to TDMS files. Why are different readings produced for the same test?

    A software application was developed to collect and process readings from capacitance sensors and a tachometer in a running spin rig. The sensors were connected to an Aerogate Model HP-04 H1 Band Preamp connected to an NI PXI-6115. The sensors were read using AI Config and AI Start VIs. The data was saved to a file using hsdlConfig and hsdlFileWriter VIs. In order to add the capability of collecting synchronized data from two Eddy Current Position sensors in addition to the existing sensors, which will be connected to a BNC-2144 connected to an NI PXI-4495, the AI and HSDL VIs were replaced with DAQmx VIs logging to TDMS. When running identical tests, the new file format (TDMS) produces reads that are higher and inconsistent with the readings from the older file format (HSDL).
    The main VIs are SpinLab 2.4 and SpinLab 3.8 in folders "SpinLab old format" and "Spinlab 3.8" respectfully. SpinLab 3.8 requires the Sound and Vibration suite to run correctly, but it is used after the part that is causing the problem. The problem is occuring during data collection in the Logger segment of code or during processing in the Reader/Converter segment of code. I could send the readings from the identical tests if they would be helpful, but the data takes up approximately 500 MB.
    Attachments:
    SpinLab 3.8.zip ‏1509 KB
    SpinLab 2.4.zip ‏3753 KB
    SpinLab Screenshots.doc ‏795 KB

    First of all, how different is the data?  You say that the reads are higher and inconsistent.  How much higher?  Is every point inconsistent, or is it just parts of your file?  If it's just in parts of the file, does there seem to be a consistent pattern as to when the data is different?
    Secondly, here are a couple things to try:
    Currently, you are not calling DAQmx Stop Task outside of the loop; you're just calling DAQmx Clear Task.  This means that if there were any errors that occured in the logging thread, you might not be getting them (as DAQmx Clear Task clears outstanding errors within the task).  Add a DAQmx Stop Task before DAQmx Clear Task to make sure that you're not missing an error.
    Try "Log and Read" mode.  "Log and Read" is probably going to be fast enough for your application (as it's pretty fast), so you might just try it and see if you get any different result.  All that you would need to do is change the enum to "Log and Read", then add a DAQmx Read in the loop (you can just use Raw format since you don't care about the output).  I'd recommend that you read in even multiples of the sector size (normally 512) for optimal performance.  For example, your rate is 1MHz, perhaps read in sizes of 122880 samples per channel (something like 1/8 of the buffer size rounded down to the nearest multiple of 4096).  Note: This is a troubleshooting step to try and narrow down the problem.
    Finally, how confident are you in the results from the previous HSDL test?  Which readings make more sense?  I look forward to hearing more detail about how the data is inconsistent (all data, how different, any patterns).  As well, I'll be looking forward to hearing the result of test #2 above.
    Thanks,
    Andy McRorie
    NI R&D

  • EMail Notification for the Newly Created users using UME API

    Hi ,
    In my application ,the user creation is handled by custom Admin module which uses the UME APIs. Upon creating the user, we need to send a notification mail to the user's email id which he provided in the Add new user form.
    <b>Is there any direct APIs available to notify the user via email. I hope the Standard user creatin module in User Administration also uses the same UME APIs.</b>
    Please let me know the possibilities.
    Appreciate your help.
    <b><b>Sample Code:</b>
         <b>IUserFactory mUserFact = UMFactory.getUserFactory();
         IUserMaint mUserMaint = mUserMaint = mUserFact.newUser(aUser.getLogin());
         IUserAccountFactory mAccountFact =UMFactory.getUserAccountFactory();
         IUserAccount portalAccount = null;
         mUserMaint.setDisplayName(aUser.getLogin());
         mUserMaint.setXXX();
         mUserMaint.save();
         mUserMaint.commit();
         portalAccount = mAccountFact.newUserAccount(aUser.getLogin(), mUserMaint.getUniqueID());
         mAccount.setPassword("XXXXXX");
         aUser.setPassword(mPassword);
         mAccount.save();
         mAccount.commit();</b></b>
    Thanks and Regards,
    Sekar

    Hi,
    I have used the Java Mail API directly send the notification upon new user creation.
    Thanks and Regards,
    Sekar

  • HT4519 my husbands iPhone and my iPhone are receiving our texts at the same time, how do we unlink ourselves?

    my ipone and my husbands ipone are linked, so we are receiving each others texts. How do i unlink so this doesnt happen?

    Settings app > Messages > Send & Receive. Make sure you are not using the same addresses. Optionally, one of you could also create a different AppleId to use for this fucntion.

  • Why do I get three notifications for the same email?

    When I receive an email I get three notifications for it. I have no clue why...

    Yeah, it's just mail, and it's totally random, most of the times it's three notifications, and when I'm lucky it's just one i'll try the reboot - remove - add  algorithm

  • Can i send to multiple email addresses for the same contact

    I coach a baseball team and I want to create contacts under the kids' names with email addresses for both parents listed.  Can I send email to multiple email addresses listed inside the same contact?  I hope this makes sense.
    Thanks!

    You can do it individually, but it can also be done with Groups in Contacts, but you will need to create two or more groups. Once you have created the Groups in Contacts, drag the contacts that have multiple email addresses into each group. Then, select Edit Distribution List… from the Edit menu in Contacts.
    For each group, select one address or the other for each contact. Do the same for the other group.
    When you address an email, add both Groups to the address field in Mail.

Maybe you are looking for