Users can connect to SAP B1 using one host

Dear Experts/Gurus,
I have a problem relate to installation of SBO 2005A Sp 01. We use 1 server to install SBO (Application+Database). The users connect to the server computer / host (CPU) using switch / router. There are 30 users, so it means there are no CPU used by all users. They directly connect to a host using the router. Could the users open the SBO GUI using that setting ? I appreciate your answers. TIA.
Rgds,

Hi Steve,
I'm not absolutely sure if I understand you right, but maybe the scenario of making SBO available via Citrix could be an option for you. Find out more under: <a href="http://www.citrix.com/English/partners/partnerFeature.asp?partnerID=14785&featureID=14805">Citrix and SBO</a>
Regards, Sandra

Similar Messages

How many users can connect to a shared drive on a non-server workstation?

How many users can connect to a shared drive on a non-server workstation? We're waiting for our server to arrive and in the interum we're using a Pegasus 2 R6 attached to an iMac running Mavericks as our fileserver. It's been sketchy, the connection to the server being dropped once in a while or the inability to mount the drive after a week of success. The Pegasus we're using now will be attached to a server once it arrives. For now I need to figure what's coausing trouble before I commit to this being our main storage as planned. The data is backed up every night so I'm not worried, its the usability issues. 5-7 people are mounting this drive and opening/saving at the same time. Is there a limit to Maverick's fileserving ability that may be causing this? Understandable if so.

The file server in the client version of OS X has a default limit of 10 simultaneous connections. That limit can be raised by installing OS X Server, or lowered by setting a hidden preference. Assuming you've done neither, you may be able to solve the problem temporarily by stopping and restarting file sharing in the Sharing preference pane, or permanently by setting another hidden preference on the server to break idle connections quickly.
defaults write /Library/Preferences/com.apple.AppleFileServer idleDisconnectOnOff -bool YES
Stop and restart file sharing. To reverse the change, run this command in the same way:
defaults write /Library/Preferences/com.apple.AppleFileServer idleDisconnectOnOff -bool NO
Credit for this solution to ASC member suter:
this file server will not allow any additional users to log on

I have 2T imac running lion Can I re-partition and use one half as a back up disk?

Bought a new mac in November and it is refused to start up yesterday. Spoke with Apple and they said I should make sure I do regular back ups in case I l ose my hard drive?!?! I did a clean install of the Operating software but was advised to erase and install.
I have taken all my important stuff off and can reinstall my programs once I get to the next stage so what I am wondering is
I have 2T imac running lion Can I re-partition and use one half as a back up disk for use with time machine so that I do not have to buy an external HD?
Cheers J

You could partition the drive, I read that Time Machine will work on if you HD partition.
BUT, it will do you no good if you HD fails.
Usually, if a HD fails it's the entire drive that is dead not just a partition.
So your time machine back would be on a dead disk, useless!

Can two user can logon into sap b1 8.8 as like sab b1 2005

Hi All Expert,
As we know that as like SAP B1 2005 we two user can logon into sap from a user id , My question is can we do the same on sap 8.8 also..
Regards,
Inder.

Hi Gordon,
Do the old two log in with the same user id is working with 8.8 also..
Thanks and Regards,
Inder.

ICM active -- NO CONNECTION for all AppServers (using TREX host names / IP

Hi Experts,
Our Basis team has set up new BWA Box for a Quality. When i went to a transaction "RSDDBIAMON" I am getting below error.
Q27: ICM active --> NO CONNECTION for all AppServers (using TREX host names / IP addresses). Configure ICM/TCM connection in SAP
RFC Connection is working. I have tested it in sm59. Can anyone help to understan where will be the problem.
Regards,

In TREX Admin, I was able to check ICM error and got IP address.. After this got to know host-name of the server is different from configured in ICM.

Creating an interface with several video windows where a user can connect their own camera to window

Hi,
I posted this in the Flash Media Live encoder Forum and it may have been the wrong place to get an answer.
currently I use the following workflow for Live video streaming.
I have FMLE on a computer streaming the Video feed to my FMS.
I currenlty use Dreamweaver to create window with a few instances of a video window and one of the windows is configured to rtmp to my server and the stream name of the stream I have setup in FMLE.
This then streams to one of the windows.
I then assign a different Stream name to the other windows.
I send an FMLE client to a user in the locations that want to have a video presence on the webpage.
I send them instructions and running FMLE and the parameters to use to get their camera up and running.
This works fine to a point.
Most of the users are not technically minded and so often this leads to issues and delays to get these things to work.
I want to move on and improve this flow.
I want to create the video instances on the page where:
Below each video window is a text input field where a user can type in their name which will be used as the stream name.
Below each video window is a button that the user clicks to connect their camera automatically without having to install FMLE.
Once the video feed is running, only that user can click the button again to disconnect it. ( The button changes to "Stop Broadcast" etc).
I have looked at the structure of Ustream for example, and this seems to be the method they use as you can download the XML file of your channe,l and the RTMP URL and stream name can be copied and then used directly in FMLE and you can stream with more control of your camera that way.
Can you please provide instructions or guidance on how to begin this process?
thanks

Hi,
Thanks for your interest in this kind of workflow.
There are multiple ways to do it. Adobe Connect does this seamlessly.
But to try out few of the latest technlogies, I recommend trying RTMFP. There is a hosted server where you can try out your sample client applications. There is also client application made similar to what you are looking for.
Please go through http://labs.adobe.com/technologies/cirrus/

Two macs, one can connect to iPhone update server, one cannot

We have multiple macs and iphones in the house. One mac can connect to the iphone update server without any problems. the other cannot. Both are on the same network. Both have identical firewall settings. One mac can manually download the iphone update file; the other cannot. Anyone have any idea what could be keeping the other mac from connecting to the download server? The other mac has no network problems with any other sites, only Apple's download server.
Suggestions would be appreciated. Thanks.

Software Update is not offering me any Airport updates on the G4 (or the Intel).
The recent Airport Update, "AirPort Extreme Update 2007-001", is of course only for Intel Macs.
They could only be "trying to use the same IP address" if they were not configured to use DHCP, but they are configured to use DHCP, and whichever connects does get an address in the 10.0.1.[2-200] range so I think that's not the problem.

IPhone user, Can Not Access iTunes Store, Using Windows 7

Dear Sir
I used to access the iTune Store from my computer everyday. But since a couple of weeks I started receiving the following (Connecting to the iTune Store) message after clicking on the Store link in iTunes.
http://i50.tinypic.com/1glc8.jpg
It just stays there loading forever.
But I can access the store normally using my iPhone and using other laptops over the same network.
What can the reason be? I am using the latest versions of iTunes and iPhone on Windows 7.
I have tried the iTunes built-in connectivity test and it passed all the tests, I have tried re-installing iTunes, And I have also checked support article (TS1470) and I already have the mentioned options enabled.
Thanks.

With that one, try launching iTunes. Go "Edit > Preferences" and select the "Parental control" tab.
Is "Disable iTunes Store" checked? If so, try unchecking that and clicking OK.
Can you get through to the Store now?

Two Users can connect to apleu3test02 but not each other

Hello,
I have been trying to connect to with my wife whom is on a road runner cable modem behind a belkin wireless router. I am on a comcast cable modem behind a linksys wrt54gv4 router, however it is flashed with an open source firmware. Both of us can connect to the various test users out there but we have intermitent issues connecting with each other. I am guessing that this could be partially due to our maximum uploads being about 345kbps. I have not setup any port forwarding, triggering, or ther router adjustments yet. I figured if I can connect to the apple test users it should not be a problem. I am working on trying to test without my router but comcast will not let me mac grab a dhcp address. Any advice would be greatly appreciated.
Me = macbook pro 2ghz with 2gb ram 10.4.7
Wife = 1.67 g4 ibook with 512 mb ram 10.4.7

I'm having the exact same problem. My father and I were able to communicate for weeks with no issues and since updating to 10.4.7 we have a 90% failure rate with video chat. It worked once last night and once this morning otherwise its an error -8.
Now until recently we have never port forwarded anything except VNC and I can't see how we could use this method with iChat when we have numerous users here at home.
I think the most frustrating part is it works from time to time and I can find the reason why.

Can connect to the server using VPN, but cannot pull up the shared drives

I can connect to the server at work using PPTP VPN. I can ssh to the server once I VPN'd in. I cannot, however pull up any of the shared drives using K. It just says that it is connecting, but nothing happens. When I disconnect the VPN, the user name and password box pops up. The only way to get rid of it is to click cancel. Nothing changed on the server since the last time I logged in. Also, when I am VPN'd in, I cannot use the Server Admin or Workgroup Manager. Any assistance is greatly appreciated.
P.S. The server is the MacMini and the client is the MacBook, running 10.5.7 software.

This is strange, your setup is the same as mine :P
Anyways, I also have a problem like this.
I connect to VPN fine, but tools that need to access the net seem to take a very long time to open. Its as if my Client Information inside the server isn't being sent to the client correctly.
It takes atleast two minutes after connecting to the VPN for iChat to connect and work again, and tools like Server Admin seem not to work at all.

How do I create PDF so that user can insert a placed file using Acrobat Reader

I have just upgraded to CS4 which has Adobe Acrobat Pro. I am creating PDF's within Pro, adding text fields and buttons for customers to access and fill in using Adobe Reader. This has worked great but I would also like to add a box with text saying 'insert logo here' and when the customer clicks on it then searches their system for the logo, selects and places within the PDF. Can anyone help me on this one?

Try the forum for Adobe Acrobat.

Allowing other users to connect via SSH and using X apps.

My computer starts ssh as daemon and I can connect from other workstations, but I can't use ssh -X to use X apps.
I usually do not need it, but when I do it is pretty annoying.
I can connect to the university computer and use X apps, but I can't connect from uni to home... :S

I just did this on the machine you have sshed into you want to set the DISPLAY variable to 192.168.1.5:0
So if using bash it should be DISPLAY=192.168.1.5:0
The ip address being the address of your computer that you trying to run the X apps on.
I also believe you have to run xhost +
So to sum it up:
xhost +
DISPLAY=192.168.1.5:0
ssh -X ezzetabi@remotemachine

Just updated to Firefox 8, can only connect 1 User at a time, how can I fix this so both users can connect to Firefox at the same time??

I have just upgraded to Firefox 8. I have 2 user accounts on my computer. Since the upgrade, only 1 user can access Firefox at a time. I am able to use IE on 1 and Firefox on the other. I have to close Firefox on 1 user before I can open it on the 2nd.

I also have gone back to V 7, which fixed the issue. I have stopped the automatic updates so the issue doesn't hapen again.

Forcing a Mac with 2 connected ethernet ports to use one over the other

I have a G5 Quad and a Mac Pro that are connected to a large network (including internet) on ETHERNET 1, and they are also directly connected over ETHERNET 2 (using Jumbo Frames). I need to ensure the G5 uses ETHERNET 2, and not ETHERNET 1, to connect to the Mac Pro. They must use both connections. How do I do this?
Tim

I've solved the problem. When connecting to the other computer, don't map the drive from the Finder sidebar. Instead, go to the Finder, hit Cmd+K, or select Go > Connect to Server..., then type the IP address of the other computer's ethernet port that you are directly connected to. Then write an Applescript to automatically mount the drive on startup.
Example Applescript:
+mount volume "afp://192.168.1.1/"+
Compile and Save the script as an Application with none of the Options checked. Place the script on the remote computer (the G5 Quad in my situation) in a suitable location like the Documents folder for your Username.
Next, on the remote computer, open System Preferences > Accounts, and select the correct account. Select the Login Items tab, and click the + to add your Applescript application to the list. After adding the Applescript, check the Hide checkbox so the script runs in the background. Close System Preferences and you're done. Reboot the computer to verify it connects, and voila!
Tim

Two solamn sap systems in One host ????

Experts,
Is it possible to install two solman 7.0 sap systems in single host.
Aleady i have installed solman 7.0/Ms sql 2005 in the Windows Host. I want to install another solman 7.0 in different SID in same the host for testing purpose.
(I installed ECC and CRM servers in the same host its works fine.)
PLease give your suggesstion
Thanks
Thirumal

Hi thirumal,
we can install two solman in one system through a concept called MCOD ie multiple components in one Database.
just as we can different SID's in one database.
for more information refer this site:
http://www.doag.org/pub/docs/sig/sap/2002/04/GeorgLeffers_SAP.ppt#550,29
Regards
Manjula.
u manjula on Aug 22, 2008 3:12 PM

Users can connect to SAP B1 using one host

Similar Messages

Maybe you are looking for