Users can no longer connect to servers via their IP addresses.

1) Up until March users could connect to two file servers (10.4 and 10.6) by IP address.
2) Now, only computers that are not managed by Casper can connect. All the Windows machines and a couple of Macs (not managed) can connect to these Servers. One of the Macs is filtered by iBoss, but mine bypasses the filter. We can both connect.
3) On the day this happened, I updated the iBoss firmware and sent out the script below which should not be related. The commonality seems to have something to do with computers managed by Casper (JAMF).
4) Any suggestions? Thanks for your help.
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -configure -allowAccessFor -specifiedUsers
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -configure -users ladmin -access -on -privs -all

Check your firewall logs find out if it's at your end that's blocking access
Log into one of the blocked machines with your login that's not blocked to find out if it's a user level or machine block
Read the iboss firmware release notes
See if there is any changes that effect your current setup
Check firewall rules make sure the effected machines, vlans etc have access to the servers
See if Casper still access the effected machines

Similar Messages

Windows user can no longer connect to my File Sharing IP address

Hello,
Since updating to OS X 10.4.9, Windows users can no longer connect to my file sharing IP address.
I have had no problems when I was using 10.4.8, and I have re-checked both the Windows computer and my Mac to make sure that the file sharing connection should be possible.
I think this may be some sort of firewall / security issue (?) in that the 10.4.9 update has downloaded something which now "hides" my Mac at this IP address. I am unsure how to resolve this problem.
Does anyone have a suggestion? Much obliged, in advance.

Can the Mac connect to the PC?
Have you checked the Workgroup is the same on the Mac
in Directory Access>CIS/SMB?
Have you tried turning off the Firewall for a test?
Has the IP changed?
Hello!
Thank you for the suggestive questions above. I haven't "tested" any of them because I simply became exasperated with the "change" in 10.4.9 and went back to system 10.4.8
Of course, now everything is right with the world and I can once again have my Windows computer connect to my Mac.
Thank you for taking the time in trying to help me -- much obliged.

After upgrade to 10.7.1 users can no longer connect to shares

Ok , im not an admin to start off, but after upgrading the OSX lion server to 10.7.1 i can no longer connect to the sharepoints on my mac mini server.
Through SMB or AFP .. i tried using the connect to server on one of my clients and when i attempt to log in , it shakes the login window as if my password were not accepted.
Heres where it gets a little confusing to me, i have 2 mac mini servers both running OSX LION SERVER 10.7.1 .... The one that I CAN NOT LOG INTO is my OD Master... the second one is just used for file sharing...
WHEN i attempt to login into the file share server (which is connected to the OD Master which is rejecting my user logins) i can connect JUST FINE and access the sharepoiints on that server...
A couple more weird things... on the OD MASTER (again the server which is rejecting all user logins) I CAN login with my admin credentials and access the sharepoints... ??
-- when i am locally logged into the OD MASTER server, if i add a new sharepoint from scratch and edit the ACL , NONE OF MY USERS SHOW UP nor any of my user groups... it only allows me to add the Administrator access to that share..
Have i done something very wrong somehwere? this server that is having a problem is only used as a OD master and File share nothing else..
I did not change any settings besides add a new mac mini server to the OD and performa the 10.7.1 upgrade.
ANY HELP WOULD BE HUGE as i have spent a 12 hours trying to figure this out before i resort to a re install.

I've only one hint to you, cause I've mot on Mac-Server.
With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
This had caused problems with some NAS systems too.
Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
Lupunus

Windows Users can no longer connect to Server

I have an Xserve configured to share via AFP and windows. It is running Open Directory as an Open Directory master. It is connected to a Windows Network that is worldwide, running in a specific subnet and domain. Recently, all the users I have configured on the machine have been migrated to a new Active directory server for their email accounts. I can connect and authenticate against the open directory using AFP, but can not connect using windows file sharing from a Windows computer, nor can I connect using SMB from a mac. Shouldn't the users be authenticating against the Xserve when trying to connect or is it passing off the authentication to another server? Do I need to move the Xserve to the new domain? (in other words, do I have to change its FQDN? )
thanks in advance,
Mike
XServe Dual 2GB G5 Mac OS X (10.3.4) Windows Domain member

I just had this same problem on my server. The only difference is it is an Xserve insted of a Mac Mini.
I restarted the whole operating systems and that appeard to have fixed the problem but I do not know what I cause was.
Did you figure anything out?

Centro can no longer connect to PC via USB

I bouhght a new PC recently and since then I can not get my Centro to connect to the computer via USB. Ive installed the software and driver and it still says no driver detected whenever I plug it in. Its also popping in and out of the device manger screen like its keeps getting unplugged andplugged back in . Ive tried both the cd driver and downloadable one.
Im running Win7 now, but was using Vista64 Home Prem when I first got the computer..
I never had any problem on my old cpompuer which was running Vista32 Home prem
Post relates to: Centro (Verizon)

Hello JalenTigh, Welcome to the Palm Support Community.
Unfortunately, Palm Desktop software has never had a driver for any 64-bit operating system. This has been true for XP64, Vista64, and now Windows 7 64bit.
If I could direct your attention to the Windows HotSync section of this forum you will find many large threads discussing your issue at the top of the section.
You will only be able to sync via a Wireless connection - on your Centro, this would be via BlueTooth.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Windows 7 Users Can No Longer Connect to Shared Xserve Drive

We've had multiple computers (both PCs and Macs) setup to use a shared Xserve. All the sudden today the mapped network drives stopped working. I've tried using the "Map network drive" option on Windows 7 to add them manually again, but every time I enter the username/password it says it is not correct. I'm mapping the drive to Z and the folder to '\\10.10.10.77\shared' which is the Ethernet 1 of the Server followed by folder name on the Xserve that worked before. I'm confused what username and password it wants here because I've even reset the Xserve passwords and they still don't work and it says underneath that the Domain underneath is the name of the current PC user...
What's going on here? Am I using the correct Folder format and with the correct username and password? This is driving me crazy!

After hours and hours of constant searching and testing I still can't get it to work?
Any ideas?
I think sharing has changed in Mavericks.

Can no longer connect to internet via airport

My roommate and I have wireless internet. I used it all last semester with no problems. Sometime in December, I was unable to access the internet (Firefox, Safari, tried both..) here in my apartment, even though Internet Connection shows a full signal under our Airport network. When I went home, wireless worked just fine on this laptop - same when I'm at a library with wireless.
I've tried restarting the wireless router, no success. I'm only able to access the internet when I'm plugged in directly to the router.
Any suggestions?

Um it's an AT&T DSL wireless router. Yes, my room mate uses the wireless. On my computer in the top right by the airport signal, when you click it, our network is shown with a check next to it, so it must be the signal from our router.
There's an IP address when I unplug my computer from the router (when the web pages cannot be displayed), but when I plug it back in to use the internet, there isn't an IP address - just an IPv6 address.

HT5500 I can no longer connect to Facebook via Safari, Firefox and Chrome from Admin account, but I can through the Guest account? Any ideas?

For some reason, Facebook is the only site I cannot reach when logged in as Admin. When I switch to Guest then I can access Facebook. I've cleared DNS cache. I've reset Safari, etc. Something is real wierd. Any ideas?

I would try posting this in the right forum your in the ipad forum right now

After ois 7 upgrade i can no longer connect my camera via wifi to upload photos to my iphone, nor ipad

I have a Canon camera that has wifi. Before the OIS 7 upgrade, I could upoad phots from my camera to either the iphone, or ipad wirelessly. Since the upgrade, i cannot. Anyone found a soluti on. I have tried resetting the settings on the camera to original, renaming the camera name to remove the apostrophe.

Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden

AD accounts can no longer connect to Lion AFP File Shares

I am running into an issue where AD users can no longer connect to AFP file shares. If you attempt to authenticate with one of our Lion server's local accounts, you connect without any issues, but if you put network credentials in then you get the window shake denial. This issue just came up this morning. I attempted unbinding and rebinding the machine, updating from 10.7.2 to 10.7.3, removing and re-adding share point permissions, turning file sharing off then on, and still no network account authentication.
Anyone have any advice for how to get network credential authentication to AFP filesharing working again?

You could enable the AFP server access log:
sudo serveradmin settings afp:activityLog=yes
and then look at log at /Library/Logs/AppleFileService/AppleFileServiceAccess.log
to see if that offers any clues.

Can no longer connect to remote server via VPN

I recently installed OS 10.5.8, and have found that I can no longer connect to my server at work. The VPN itself (via PPTP) works fine, it's just that when I try to connect to the remote server (via Connect to Server) I get a dialogue saying 'A volume failed to mount.' A further dialogue says 'Sorry, the operation could not be completed because an unexpected error occurred. (Error code -6602)'
Has anyone found a way around this, please? I'm disabled and I need to be able to work from home – without the connection I'm stuffed! Obviously I've tried rebooting the machine etc, but nothing seems to help.
Thank you for any assistance you can give.
Kitty.

For some random reason this connection has begun working again – please ignore the question!

Recently upgraded to 10.8.5 however the Himedia player connected to my iMac via sharing can no longer connect to the iMac.

please help. recently upgraded to 10.8.5 however the Himedia player connected to my iMac via sharing can no longer connect to the iMac. the media player recognizes the imac and the shared files, however when you try to connect from himedia to imac it give a login unsuccesful.
Have contacted Himedia and they say its something to do with Mountain lion

This helps but
scroll bar very flat, slim and hard to see not able to customize
at least I know I have to suck it up and not loose anymore time
Thanks

Airport extreme. XP outlook can no longer connect

Since October My wife and I can no longer connect to our office servers using outlook on PC's via Airport extreme wireless. Both our g5 and g4 have no problems.
The PC's indicate excellent signal and status says "connected "thru our VPN connections to the office.
Both PC's suddenly stopped working this connection thru outlook and the internet.
I noticed many discussion people are in the same boat.
What happened?
Seems odd this is not getting much remedy information.
Sounds widespread.
Are there truly any technical resolutions?
I suspect something in the latest XP updates, CAT login patches etc.
My IT office guy is an amazing craftsman and he could care less about a Mac router.
They ("Windows" OS people) are so sure of themselves...little hope they might suspect there own equipment.

Two things to try:
...Ensure the appropriate NLTM authentication is enabled? Probably NLTMv1.
Server Admin -> Open Directory -> Settings -> Policies -> Authentication
...Ensure that the Microsoft Windows XP clients have a compatible authentication requirement?
This security settings authentication downgrade is set via an msc widget on the higher-budget Microsoft Windows XP variants, or directly via the LMCompatibilityLevel registry knob available within all Windows variants.
With the upper-budget Windows versions, you can run the secpol.msc tool, navigate to Local Policies - Security Options, then to Network Security: LAN Manager authentication level, then (if the box is set this way) switch from "Send NTLMv2 response only" to "Send LM & NTLM - use NTLMv2 session security if negotiated".
On all Windows XP versions including the lower-budget versions, you can use regedit to switch the HKEYLOCALMACHINE\ SYSTEM\ CurrentControlSet\ Control\Lsa registry key value LmCompatibilityLevel to 1

Can no longer connect through Facetime on my MacBook

I can not longer connect to other Facetime users via my MacBook Pro. Has anyone experienced this issue?

Hi PI Gadget,
Welcome to Apple Support Communities!
Take a look at the article below, it provides tips that should help you resolve the FaceTime connection issue.
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Troubleshooting FaceTime for Mac
You can make FaceTime calls using the FaceTime app. You can call FaceTime users whose contact information is in Contacts. You can add contacts and edit contact information in either FaceTime or Contacts. To place a video call, you may use a phone number or email address.
If you encounter issues making or receiving FaceTime calls, try the following:
Verify that FaceTime is enabled in FaceTime > Preferences.If the issue persists, or if you see the message "Waiting for Activation", try toggling FaceTime off and then on.
Verify that the Date, Time, and Time Zone are set correctly:
From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
Enable "Set Automatically".
Click the Time Zone tab and confirm the closest city is correct.
Verify that both parties are connected to an active broadband Internet connection.
See Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection.
Consult Using FaceTime behind a firewall for necessary ports to open in firewalls, security software and routers.
If you encounter issues using a Wi-Fi network, use standard Wi-Fi network troubleshooting to resolve interference and other issues.
Verify the phone number or email address being used is the correct one activated for FaceTime.You can verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
Verify that both parties have installed the latest software updates for their Mac and/or device. See:
Mac OS X: Updating your software
iOS: How to update your iPhone, iPad, or iPod touch
-Jason

Can no longer connect my MBP to a local file server

I can no longer connect to a particular computer on my local network from my MBP(Mid 2010 running 10.6.6). I am trying to connect to a Mac G4 tower running 10.4.11. This has worked in the past but now does not.
An older MBP(Mid 2007 running 10.6.6) has no problem connecting to the G4. My Mid 2010 MBP can connect to the older MBP. The Mid 2010 MBP can also connect via smb to a PC on my local network. All of my systems can connect as clients to the Mid 2010 MBP.
The G4 does show up in the Mid 2010 Finder window sidebar under Shared. I can ping the G4 from the Mid 2010. I can even ssh into the G4 using the CLI from the Mid 2010. When I try to connect to the G4, either via the Shared Icon in the sidebar or via Cmd-K, I instantly get a "Connection failed" message. I have, via afp, tried both the server name and the IP, both of which work fine on the older MBP. No effect. I ran full Applejack on my Mid 2010. No effect. I reapplied the 10.6.6 Combo Updater. No effect. I deleted all references to the G4 in my keychain, but the "Connection failed" message comes before any attempt at authentication. Grasping that straw had no effect. I do have Snow Leopard Cache Cleaner but hesitate to nuke all my caches before trying something else. Ideas anyone? Thanks.

I forgot to add: I also tried a different user account on the Mid 2010 MBP to connect to the G4. No effect.

Users can no longer connect to servers via their IP addresses.

Similar Messages

Maybe you are looking for