Users can't be accessed

HELP!!! I have created several "user accounts" on my emac, and they worked fine for a few weeks. Today they wont log on. It continually shows the blue progress bar, but never logs on. The original user name works, as well as the administrator log-on, but not the other user accounts I have set up for my kids. Also, I never got a reply to the queestion of whether the volume can be set to mute for the speakers, but leaving the headphone jacks working?

James,
Are the stalling user accounts all non-administrative? Do they stall if you perform a Safe Mode startup? What happens if you hold the option key down while trying to log on to those accounts?
If you plug headphones into the jack, that should cut out the internal speakers independent of the System Preferences/ Sound settings.

Similar Messages

Linksys X3000: External internet users can no more access my web pages

I have web server setting behind the Linksys ADSL modem, I set the DMZ IP to my web server IP so the external internet users can access my web pages.
This setup was working fine until I switched to “Linksys X3000” modem, external internet user can no more access my web pages.
I had set the DMZ IP correctly in the new modem. The local LAN users can access the pages without any problem.
Any idea what is the problem?

The ability of the external computer to ping the router’s WAN ip address is vital in accessing the devices/applications behind the router remotely. With such, you need to have “Filter Anonymous Internet Requests” unchecked. Another thing to consider is the way DMZ was set; make sure that you have set “Any IP Address” for the source ip address and have indicated the web server’s ip address for the destination ip address.

Help! My IE8 users can no longer access their wiki pages after upgrade to Lion.

I upgraded my SL server to Lion without checking the browser requirements for the new Wiki server. My users access the wiki via a Windows 2003 Terminal Server which is stuck on IE8, can't install IE9 on it. I push out the home page URL via group policy and now everyone is getting the "unsupported browser" message. Is there any way to allow them access with IE8? They don't actually update the wiki, that can be done with a compatible browser no problem but they need to be able to click on links. Do I just need to set up a separate website for them?

Anybody got this?
I've got 2 drives, and only the bottom one works after the 10.7 rollout? Doesn't appear that the other one is even recognized in the system profiler anymore.
Surely there's someone that knows wth is going on here...?

How can I lock labview window so casual user can't move/access desktop?

I'm developing a vi for a museum exhibit and would like to keep visitors from getting to desktop and quick launch bar. seems i can do everything else via window appearance except stopping window dragging.

If you goto File->VI properties->Window Appearance and then uncheck the "Window has titlebar" and "allow users to resize window", they should not be able to move the window. You most likely what to close the quick launch bar by dragging it off the start menu then closing it. Also, you might want to right click on the start menu and goto properties and unselect the "always on top" option. This will allow you to reposition the form to cover the start menu. Let me know if you have any questions.
Best Regards,
Michael Halloran
Systems Engineer
Viewpoint Systems
[email protected]
National Instruments Select Integrator

Check User Can Access the site collection Are Not?

Hi All
I have some requirement to check user can access site are not through powershell?
Recently we done migration from 2010 to 2013 SP after that i got some problem some users can not access site but this user have permission in sp 2010 site .
Regarding this i need to check specific user can loing or Access the site collection are not. using powershell
Some one said impersonate user we can check user can open the web are not but i don't know this impersonate.
Please help me guys....

Hi,
You can check the permission for specific user with powershell. Here is the link. Hope this will help.

How we can lock No more than one user can use the table at a single time

Hi Abapers,
0) which function modules to lock & unlock a table.
1) When you execute the program, we can check if there is any lock on this table. If yes, the user should be able to only view the table contents and not modify.
2) If there is no lock, then lock the table and go into change mode.
3) On exiting from the program, unlock the table using the function module.
4) more than one user can't modify the table just display.
Note: If there is any lock, display message saying table is locked.
Plz help me for this requirement.
Thanks
Nani

Hello Nani
Have a look at the lock object EMMARAE (Lock MARA and MARM/MAKT exclusively) in transaction SE11.
Inspect the F1 help for field Lock mode:
DE ENQMODE
Short Text
 Lock mode
Definition
 Defines how to synchronize table record access by several users.
The following modes exist:
 Exclusive lock
 The locked data can be read or processed by one user only. A request
 for another exclusive lock or for a shared lock is rejected.
 Shared lock
 Several users can read the same data at the same time, but as soon
 as a user edits the data, a second user can no longer access this
 data. Requests for further shared locks are accepted, even if they
 are issued by different users, but exclusive locks are rejected.
 Exclusive but not cumulative lock
 Exclusive locks can be requested by the same transaction more than
 once and handled successively, but an exclusive but not cumulative
 lock can only be requested once by a given transaction. All other
 lock requests are rejected.
If you want to lock a standard table search whether the table is used in lock objects (Where-Used-List). If it is a customer table you have to create your own lock object (including two function modules: one for enqueuing and the other for dequeuing).
The lock modules can be found in menu GoTo -> Lock Modules.
Given these lock modules the logic should be quite clear after starting the program:
1. Request lock -> if successful, continue in Change mode; -> if failed, continue in Display mode
2. Before leaving the report remove lock (note: no problem if no lock has been set in the beginning).
Regards
Uwe

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights".
There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
We are in an enterprise environment and users simply do not have administrative rights on the computers.
I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
Any help or suggestions are greatly appreciated.

Jeff,
Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
The apps do not load with their current standard user permissions.
The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

Windows XP users can't access SMB/CIFS shares on MAC OSX10.4.4 Xserve bug?

The Xserves are new for us. This problem involves two of the 10.4 xerserves.
1 serves as an Open Directory System Master(10.4.3). 2 Serves as a file share & backup (10.4.4).
Both are production machines and cannot easily be restarted.
There is no Windows network, Active Directory or Windows domain in our network.
We created a SMB and AFP share on the file server which is a member of the Open Directory. (It is bound and kerberized to server 1).
The users all have accounts in the OD system and all passwords are Open Directory. Our users can ssh into the various xserves (including the file share server 2) and authenticate against OD.
We made the shares available via smb under Protocols --> Windows File Settings. We turned the Windows Service on in Server Admin. I'ts a standalone server and all the authentication types are checked under access.
The MAC (powerbook) users can access the share fine. The Windows users can't. The Windows laptops can see the file share server (through search - not visable is Network Neighborhood) but when they try and connect they are presented by an authentication box that just keeps cycling over and over regardless of what the user types as user name & passwd.
I tried to access the smb share with my powerbook(10.4.4) and have the same issue. I'm presented with an authentication box but authentication fails.
The Windows File Service Log shows:
auth.c:checkntlmpassword(312)
checkntlmpassword: Authentication for user [csmith] -> [csmith] FAILED with error NTSTATUS_WRONGPASSWORD
[2006/02/24 21:52:03, 1] authods.c:opendirectory_authuser(212)
User "csmith" failed to authenticate with "dsAuthMethodStandard:dsAuthSMBNTKey" (-14090)
[2006/02/24 21:52:03, 1] authods.c:opendirectory_smb_pwd_checkntlmv1(427)
opendirectorysmb_pwd_checkntlmv1: [-14090]opendirectoryauthuser
[2006/02/24 21:52:03, 2] /SourceCache/samba/samba-92.15/samba/source/auth/auth.c:checkntlmpassword(312)
checkntlmpassword: Authentication for user [csmith] -> [csmith] FAILED with error NTSTATUS_WRONGPASSWORD
[2006/02/24 21:52:03, 1] authods.c:opendirectory_authuser(212)
User "csmith" failed to authenticate with "dsAuthMethodStandard:dsAuthSMBNTKey" (-14090)
[2006/02/24 21:52:03, 1] authods.c:opendirectory_smb_pwd_checkntlmv1(427)
opendirectorysmb_pwd_checkntlmv1: [-14090]opendirectoryauthuser
[2006/02/24 21:52:03, 2] /SourceCache/samba/samba-92.15/samba/source/auth/auth.c:checkntlmpassword(312)
checkntlmpassword: Authentication for user [csmith] -> [csmith] FAILED with error NTSTATUS_WRONGPASSWORD
[2006/02/24 21:52:03, 2] /SourceCache/samba/samba-92.15/samba/source/smbd/server.c:exit_server(595)
Closing connections
I've googled this error and it seems that there a lot of engineers out there with the same problem but no answers. Could this be a bug with Apple's SMB process? Is there something I've missed? (I've looked at the smb.conf and have even turned off deny clear text passwords - I've even tried granting guest access) Anyone have any ideas?

On the server itself, run the following in the Terminal:
(from a few different sources):
run ps -auxw | grep Password
to see if Password service is running
Also check the logs in /Library/Logs/PasswordService
Try: id username
and see if you get some info returned.
Ex: id jimguy
You should get some info about uid, gid, groups.
sudo killall -USR1 DirectoryService
Then try to login from a client machine.
Be sure to re-issue
sudo killall -USR1 DirectoryService
in order to stop the (far more) verbose logging.
Then check the logs in /Library/Logs/DirectoryService
In Open Directory, you might want to revert to standalone (this will destory the existing OD setup) and then re-promote to OD Master. You'll lose all OD users however when doing so. If you don't have many, this may be best.
You'll want to verify the hostname, and forward & reverse DNS lookups before re-promoting, and watch for any errors when promoting to OD master
See, when you say "The real clue is that I'm unable to access the shares from my Powerbook G4 with my Open Directory account. I can log in to the file share as the local admin though and that's why I'm thinking there is a bug in the samba/OD relationship. " - that's the real clue indeed.
The local admin account, the first admin account you setup on the server, is indeed local, and resides in NetInfo, not Open Directory.
So something is afoul in your OD.

Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix.

Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix this. I can not update any of the apps associated with that user name.

Is this itunes on the iPad or on my computer? Thank you for the reply.

How can i save music and pictures so all users can access them?

how can i save music and pictures so all users can access them?

Hi, this should be your answer as for sharing music. For photos though, I would assume you can do the same thing. Hope it helps!
http://support.apple.com/kb/ht1203

Multiple Users Can't Access Time Capsule Data

My wife and I have two separate Apple MacBooks that share a Time Capsule. We have different account names on these respective computers. I initially set up my Time Capsule and created folders that I can access from Finder.app when I connect over our wireless network. In Airport Utility.app, under the "Disks" tab, I set up the shared disks "with device password", so that she and I can mutually access all the data on the Time Capsule. However, when I try to access it from her computer, I click on the Time Capsule in Finder.app and get this dumb Sharepoint icon--a total dead end. I created another account on her computer with the same name as the account on my own computer, and from that account, I'm able to access all of the data on the Time Capsule. This therefore seems to be a permissions issue, but I've checked all of the files and folders on the Time Capsule and ensured that they all have "everyone read & write" access, so there should be no restrictions on access to this data.
Why are the volumes on my Time Capsule sensitive to the user accessing them? How do I set up data repositories on the Time Capsule that can be accessible to all users on my network? I'm out of ideas.

Are both computers actually running Mavericks??
This is very typical Yosemite problem.
For some reason which I don't yet understand Yosemite is horrible at handling network drives.
dumb Sharepoint icon
Sharepoint is a dlink app?? If you have ever had some app loaded that uses a different product to apple then it can mess your access.
WD share stuff seems to be the worst and causes no end of problems.
What you are seeing btw is the TC is not a NAS.. you are trying to use it as one.. but it isn't.

How can I export an entire album to my desktop so any user can access my photos?

Is there an easy way to export photos from my iPhoto library so that other users can access them without needing a Mac or iPhoto?

But if it's a big album, be sure to create a new folder on the desktop first, to export them into. Having hundreds of individual photos on your desktop will slow your computer to a crawl.

HT1495 My Wife and I have separate accounts on the same Macbook Pro. I have moved the iTunes library to a shared area and we can both access it, however, my Wife (secondary user)can't import cd's. Is there something we are missing and is there a way to d

My Wife and I have separate accounts on the same Macbook Pro. I have moved the iTunes library to a shared area and we can both access it, however, my Wife (secondary user)can't import cd's. Is there something we are missing and is there a way to do this?

You are more likely to get relavant and useful suggestions posting to the Mac forums instead of the iTunes for Windows forum where you've posted.

User can't access detail Hardware/Software Inventory

What right or permission do I need to give so that a user can access the detailed Hardware/Software inventory of a computer? I don't want them to be able to add or modify computer properties.
It's currently grayed out for the user.
Jim

jwebb,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Other user can't access to OBIEE 11G installed on a server

Hello,
We have installed OBIEE 11G on a server ( windows sever 2008 r2) with admin account, and it works fine, But others users can't access to obiee 11g ( administration icons are white in their sessions) even they have admin rights.
Can anyone tell me what should we do??
Thank you.

Hi,
This is the exact format how my tnsnames.ora file looks. sorry, I can ping it in command prompt now. In my connection pool i tried first DSN = ab.bc.xy.zx, did not work. Then I saw oracle's default repository and changed my DSN to your suggested format starting from "DESCRPTION" to rest. Still no luck Do you think, i should put the same TNS in my local machine??
ab.bc.xy.zx =
(DESCRIPTION =
    #(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.110)(PORT = 1521))
    #(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.120)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.130)(PORT = 1521))
    (LOAD_BALANCE = yes)
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SID = cap2)
thanks,
BK.

Users can't be accessed

Similar Messages

Maybe you are looking for