Users can't login on workstations with new os

I have just upgraded my client machines from OS 9 to 10.3, now they won't log into their specific drives on the server. I can login using the workstations stand alone name and I can authenticate and see/reach the server, but the users can't log in.
Do I need to change some settings to allow the users to access their drive?
Does the change that I am assuming I need to make need to be done on every workstation?
I have six workstations that didn't need to have their os upgraded. The students can log into those perfectly fine.
I think I've checked everywhere I'm supposed to and haven't seen any settings that aren't the same on the other workstations but I'm sure I've missed something as I don't have much experience working with the server at all.
Not only is our tech budget tiny (we're a small school) but no one in our area works with macs anymore. So thank you for any help you can give me.
Dana

Hi
Presumably the server is 10.4? What Services are configured and running on the Server?
+I have just upgraded my client machines from OS 9 to 10.3+
Would this be 10.3.9?
+now they won't log into their specific drives on the server+
Do you mean individual user's networked homes? OR do you mean a share point accessible to all?
+Do I need to change some settings to allow the users to access their drive?+
If you are indeed talking about networked home directories - yes.
+Does the change that I am assuming I need to make need to be done on every workstation?+
Yes.
+I have six workstations that didn't need to have their os upgraded. The students can log into those perfectly fine+
Presumably these workstations are a mix of 10.4/10.5? If so then check the LDAPv3 configuration in Directory Access (for 10.4) and Directory Utiltu (for 10.5). These applications can be found in /Applications/Utilties.
I appreciate your budget is tiny but why 10.3? For a small outlay you should be able to purchase 10.4? There's nothing wrong with 10.3 its just from your point of view and skill set it would probably be easier to integrate workstations running 10.4. Taking this further you could utilize what budget you have and hire a consultant to do this for you. It should not take too long judging from what you've posted?
Tony

Similar Messages

A particular network user can't login to a mac in a classrom but other network users can. Then the network user can login to other identical macs in same classroom. Anyone seen this before?

A particular network user can't login to a mac in a classrom but other network users can. Then the network user can login to other identical macs in same classroom. Anyone seen this before? It has happen twice. Two different teachers in two different classrooms entering the correct user name and passwords and computer won't allow them to login. Then they try in different computers in same classroom and have no problem login.

Yes. I can login with a test user. And any other network user can login as well to this particular mac. Actually the mac has bootcamp and boots into either mac or windows. The same user entering the same login username and password can login into the windows side, but not the mac side.
I had this same issue last semester in another classroom, another mac and a different teacher. This summer I reformatted and imaged that mac and I asked that teacher to login today to that reimagened mac and she had no problem today doing so.

Apple Users Can't Get Rid Of The New 'Super Cookies' That Track Private Web Browsing

Further to the article "Apple Users Can't Get Rid Of The New ‘Super Cookies’ That Track Private Web Browsing" https://ca.finance.yahoo.com/news/apple-users-cant-rid-super-180500863.html, is there a solution to resolve this security issue?
Here's an excerpt from the above mentioned article;
"Apple users are particularly vulnerable, as their devices do not have a function that lets users delete super cookies from their browsers.
Most websites place what’s called a “cookie” on visitors’ computers, which is used to track them and record their preferences. It’s how websites can remember your password, for example. Like your web browsing history, they’re easy to delete. If you use your browser’s “private browsing” mode they’re never saved in the first place — and advertisers can't track you, and other computer users can't go back and see what you looked at.
However, a flaw in a modern web security feature called “HTTP Strict Transport Security” (HSTS) allows websites to plant “super cookies” that can be used to track web users’ browsing habits even when private browsing is enabled.
Here’s how it works.
Security researcher Sam Greenhalgh writes that HSTS “allows a website to indicate that it should aways be accessed using a secure connection that encrypts your communication with the site.” This “flag” is then saved by your web browser, ensuring that any future visits to the website are secure. But this can also be abused, using this feature to store a unique number that can be used to track your web browser.
And because HSTS carries over into private browsing, it means the “super cookie” can be used to track you whether you’re attempting to cover your steps or not.
Greenhalgh says that Apple’s Safari web browser is especially vulnerable to the exploit. While clearing cookies on Mozilla’s Firefox, Google Chrome or Opera also erases HSTS flags, deleting the super cookies, there’s no way to do so on Safari on iOS devices.
This means that if you’ve had super cookies placed on your iPad or iPhone, there’s effectively no way to get rid of them short of reformatting the entire machine."

Hi all,
I tried this with IOS 7.1.2 Safari on an iPad retina and the super cookie did not persist after web data and history was deleted.
I also tried this with IOS 8.1.2 Safari on an iPhone 6, and the super cookie persisted even after deleting web history and website data.
Evidently it was ok on 7.1.2 and broken on 8.1.2.

My question is this: Can good teaching be enhanced with new technology?

Can good teaching be enhanced with new technology? Adobe eLearning Suites is certainly a high-end product with many users and a lot of finance and research behind it. My question is why? Where is eLearning going and, again, is face-to-face teaching going the way of the dodo as a result of this new type of technology?

Hello,
Hope you were not too startled by my reaction, your question reminds me of all the antagonism I have to struggle with every day in the college (with colleagues and management), hence my 'passionate' reaction. Reactions like 'I've written a good course some years ago, I'm a good teacher, why should I need all those hypes you are talking about...'. But that is not what you are interested in...
You asked about tests reported. Vaguely I remember (from a training in 2009) some tests, but have to search for the right references. My personal opinion about those tests is that first of all one should know precisely what to test: when is a training successful or more successful? What do you want to measure: it is very easy to test the 'short time' knowledge acquired by a training, that is what we academics are doing most of the time. But I'm not sure that this really is a measure for training success. Who would dare to postpone the test a couple of months after the end of the training?
I'm still teaching F2F, but nowadays not at all like I did 20 yrs ago. Was a rather good teacher, my lessons were very good prepared, with a clear structure and was able to explain in a language comprehensible to most of the students, felt successful when at the end of a lesson, trying to test if the proposed subject was clear to (almost) everone the result was positive. Students felt good too: at that moment, leaving the classroom, they had understood what I had tried to explain. Everyone happy. Was this good teaching? There was a good written course, but when studying the course for the final exam, students were confident, they had understood everything in the lesson, but ... that was so long ago... And, like Rick also pointed out, a lot of questions arrived, and I started explaining again, and again... Who feels well? Some colleagues are still happy with every answer they can give, but I got pretty unhappy. Some students do not dare to ask questions, some need 'audio', others need 'video', ...
Doing some sort of blended learning now: try to present some structure, basic ideas F2F and get them to work on their own. Most of them do not like to read long written courses, so give them small chunks they can digest when they need it for their tasks. And use everything to make it less boring: video, audio, interactivity, self-assessments, let them twitter, chat, discuss on a forum, blog, create a wiki, search, explain to each other... We have the tools, just need some creativity.
Did I do some research with my students? Not in the regular structured way tests are normally conducted. But I'm often starting a lesson with a survey (on our LMS) where students (anonymously) are given their idea about their proper knowledge about the subject, about the used techniques, about their 'digestion' of the previous lesson, about the work they have done: purpose is for me to have some feedback and a base to go on, for each student to have an idea of his position in the group. We are looking at the statistics together and discussing it briefly. When introducing some new 'hype' there is never an obligation, they can try it out and give their opinion. Just an example: when starting to offer CP-SWF's I offered demonstrations, training simulations and assessments. Feedback from the students pushed me just at never creating demo's again. For the moment I introduced Twitter for a project, will have their feedback after next week and judge then.
Sorry again for a too long answer (begging you pardon, Rick too). When I find the references I have been mentioning I'll post them. Now it is getting rather late, have quite a lot of meetings tomorrow with students.
Lilybiri

Lync 2013 disabled user can still login.

Ok. so we have this weird behavior and it's been driving us crazy for over a week. We have a lync 2013 deployment on a forest with several child domains.<o:p></o:p>
In the middle of the deployment, we noticed that our changes to the user characteristics were not being updated. Eg: we enable or disable
enterprise voice, no changes. We change the sip URI, log out, login, nothing, no changes. And we noticed that if we disable the user from Lync server (from the lync controlpanel), the user can still login. We assumed some lag on AD replication, but no, a user
can still login after a week!<o:p></o:p>
The deployment is a standard Lync 2013, single FE, with a single Edge server. We have enabled Enterprise voice, changes to the enterprise voice routes are
working, if we enable or disable a route we can see it on the client, but changes on the dialplan are not reflected.<o:p></o:p>
I can’t find any reference to this behavior. I know if I disable a user from the AD he can still signing into Lync, but this is different, we are disabling
the user from Lync server. We even removed the user completely from Lync and he can still use it as normal.<o:p></o:p>
We checked the user using adsiedit and the msrtcsip-userenabled is set to false, we even voided the certificate via lync console. Still able to use it.
Suggestions?
Thanks in advance.
Fabio Ricci.

Hi,
Please check if there is any error message on FE Server when the issue happen.
It seems to be the issue of CMS replication.
Please check CMS replication status by running Get-CsManagementStoreReplicationStatus.
If CMS replication not update to the latest version, run Invoke-CsManagementStoreReplication.
If the issue persists, please check Lync Server update, make sure Lync Server update to the latest version, and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

The same user can only login once

Hello,
I have a problem with my system. I made a system where you must login.
I use the following code:
boolean login = false;
String username= request.getParameter("username");
String password= request.getParameter("password");
User user= Usermutations.makeviaUsername(username);
if (user.getPassword().equals(password) && !password.equals("")) login= true;
if (login) ReqD = getServletContext().getRequestDispatcher("/Overview.jsp");
else ReqD = getServletContext().getRequestDispatcher("/False.jsp");
request.getSession().setAttribute("user",user);
request.getSession().setAttribute("username",username);
request.getSession().setAttribute("password",password);
if (ReqD != null) ReqD.forward(request,response);
//Clean up resources
public void destroy()
Now I want that the same user can only login once. So when a user login with his username and password, no one else can login with that user name and password.
I don't wan't to put the username in the database and then validate if the user is already logged in, because then the user must logout and not close the webbrowser else the user stays in the system.
Does anyone knows a solution top this problem.
Thanks in advance,
Henk

So I wan't the database and when the user is logged in
the name is set in the database. But when the user
clicks on the X (close button in the browser his
username must be deleted from the database)You can't tell when the user does that (or perhaps you can sometimes, with difficulty). But even if you could it doesn't solve your problem. Many people keep their browsers open all day, and -- you may find this shocking -- they go to sites other than yours.
So basically, if you don't provide them with a logout button you can't tell when they "leave" your site. And even if you do provide them with a logout button, they won't necessarily bother to use it. So you're left with waiting until the session expires, and then logging them out. This also means that if they come back to your site while the session is still active, then they are still logged in. This is not an error and you should not treat it as one.
PC²

ITunes was on a drive destroyed by virus; how can i sync my iPod with new iTunes on new computer without losing my old library? There is no backup iTunes/iPod files available.

how can i sync my iPod with new iTunes on new computer without losing my old library? There is no backup iTunes/iPod files available.

If you connect your ipod to your computer then look in the hidden folder labeled "iPod_Control" . (This is on a Mac version, but i think it's the same for Windows) and in "Music" is all your music mixed up in different folders. Just drag the MUSIC folder onto itunes then BAM! It's done ;D
Source:... This is what I did when this EXACT thing happened to me ;D

When my hard drive died I lost my itunes library and now I'm being told that I can't synch my ipod with new songs unless I delete all existing because I can only have one library at a time

when my hard drive died I lost my itunes library and now I'm being told that I can't synch my ipod with new songs unless I delete all existing because I can only have one library at a time

Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Can you uuse apple remote with new imac

can you uuse apple remote with new imac

Welcome to the Apple Support Communities
The new iMac hasn't got an IR port, so it's not possible to use the Apple Remote with the new iMac. See the iMac's specs > http://www.apple.com/imac/specs/

Two users can't login to Bonjour, but other users can

All the Macs in my house are set to log into iChat on startup, which creates a defacto messaging network around the house. Quite handy. But now, on one particular machine (a G5 iMac iSight) two users can't seem to log into Bonjour, although on the same machine all the other users can.
I've looked at some other posts on this site, and have checked that Address Book shows 'me' as correct for both users. The Firewall is not set to Essential Services Only, and there is no limit on the bandwidth. The Quicktime streaming setting is set to 1.5 mbps.
In iChat, when using one of the two troublesome logins on the G5, when I click cmd-2 to bring up the Bonjour list, it says Bonjour is not enabled, and gives a click button to enable it. But clicking it does nothing - no effect whatsoever.
When those two same users use the external Buddy List (and an AIM screen name) their iChat works fine.

Hi Nick,
This is what I have found out.
It relates more to Shares shown in the Finder but may offer clues.
I have G4 Tower that has been upgraded from Jaguar actually, to Panther, Tiger and Finally Leopard.
Along the way I bought a MacBook Pro. (Now on Snow Leopard)
At this Point I changed the G4's Computer name to represent it was the G4 and called the MacBook Pro "MacBook Pro" rather than my first Admin Account name (otherwise both Computer names and Short names would have been the same)
I also changed the Leopard's My Card in the Address Book to give it a different Name in iChat.
Somewhere during this process the G4 ended up with a Ralph-G4.local ID, a computer's name of Ralph Johns's Computer, a Address Book ID of Ralph G4 and the short name of ralphjohns
The MacBook Pro has MacBook Pro as the Computer name and .local name and the short name is alsoralphjohns. The Address Book My Card is my full name.
Now in discussion with a Level 4 poster who knows more about this than I do I found out that in Leopard if File Sharing is Off the Bonjour ID is still supposed to show in the Snow Leopard Shares.
However if it is ON whether you use AFP or SMB or Both it is only supposed to appear once and mine was appearing twice.
Changing the Computer name to something else seemed to confuse things (I could not Log on to share from Either Computer)
Changing the name back resolved that but changed the .local ID on the G4 as well.
(Changing the .local name back to what it was before seems to have had now effect now.)
However the G4 now only shows once in the MacBook Pro Shares.
I do not think the Upgrades are the distinguishing feature more my poor attempts at making sure the new (then) MacBook Pro had a different ID than the G4.
I have been able to Bonjour Video and send files as well as see the Other Computer in the Bonjour Buddy lists.
So in summary.
The Address Book My Cards have to be Different.
Sometimes changing the Computer name or the .local name does seem to cause issues in File Sharing - which may have some influence on Bonjour as a whole.
Whilst my G4 was showing up in the MacBook Pro as two Shares it was listing the .local name and the Computer's Name as shown in Sharing which were different.
It maybe this if it is happening for this computer that may give clues.
7:59 PM Thursday; October 15, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Users can't login to Groupwise after export

Hi All
We have a two-node cluster running GW7.01 on Netware 6.5 SP7. As part of our disaster recovery test we've done the following:
1. Installed netware 6.5 sp7 onto a new server in its own tree.
2. Installed GW7 on this server, with an identical groupwise system i.e same domain name, etc (only difference is server name, IP, and tree name).
3. We then exported the NDS/GW objects from the current production tree using the GWport32 utility into the new tree on the new server.
4. We've restored from a backup tape the PO database file and the accompanying files, the domain database file, and all the files and sundirectories from the ofuser, ofmsg, and offiles directories onto their corresponding locations on the new server.
5. After getting C00F and D019 errors, we've tried to rebuild the ngwguard.db and the PO by running a standalone GWCheck.
Our problem is that I can login to the new server (edirectory tree) as any user albeit without any password but unable to login to groupwise. I've set and reset passwords in ConsoleOne but I still can't login to groupwise.
We would be very grateful if anyone could tell us what else we need to do.
We're hoping to achieve a situation where in an extreme disaster, we are able to restore mail from tape backups so that users can still logon to this new server and have full access to their mailboxes with ease.
regards
AD

awuku wrote:
> Hi All
> We have a two-node cluster running GW7.01 on Netware 6.5 SP7. As part
> of our disaster recovery test we've done the following:
>
> 1. Installed netware 6.5 sp7 onto a new server in its own tree.
>
> 2. Installed GW7 on this server, with an identical groupwise system i.e
> same domain name, etc (only difference is server name, IP, and tree
> name).
>
> 3. We then exported the NDS/GW objects from the current production tree
> using the GWport32 utility into the new tree on the new server.
>
> 4. We've restored from a backup tape the PO database file and the
> accompanying files, the domain database file, and all the files and
> sundirectories from the ofuser, ofmsg, and offiles directories onto
> their corresponding locations on the new server.
>
> 5. After getting C00F and D019 errors, we've tried to rebuild the
> ngwguard.db and the PO by running a standalone GWCheck.
>
> Our problem is that I can login to the new server (edirectory tree) as
> any user albeit without any password but unable to login to groupwise.
> I've set and reset passwords in ConsoleOne but I still can't login to
> groupwise.
>
> We would be very grateful if anyone could tell us what else we need to
> do.
>
> We're hoping to achieve a situation where in an extreme disaster, we
> are able to restore mail from tape backups so that users can still logon
> to this new server and have full access to their mailboxes with ease.
>
> regards
> AD
>
>
I would NEVER have use GWPORT32. Why did you?
1. You have to restore eDirectory in a different way.
2. If tree is still intact reimporting is bad
3. IF tree is not intact, you still have to restore eDirectory differently.

Can't login to Skype with Microsoft account

Hello!
My problem is I can't login to Skype (website and program both) with Microsoft account. When I try to login to Skype on website, it says: There is a problem signing in with Microsoft account. Please try again or sign in with Skype details instead.
Please help me, I tried so many things and nothing works...

And me. And I tried to reset my password by getting the "password token" emailed to me. Once received I clicked on the link to reset my password and it told me that my "password token wasn't recognized" and to enter it manually. I did that, going as far as to cut and paste the token, and it wasn't "recognized" again.
And when I was able to sign in, I couldn't get any new contacts, even though I knew they were presently signed in.
Bring back Windows Live!

Domain users and local users can't login to reporting service web environment

Hello,
We installed reporting services at one of our customers but aren't able to use domain users to login. We've tried to login with a domain user, a local user but both aren't working. We set the proper permissions for the users on the reports folders.
We can only login with the buildin/administrator account on the local url: http://servername/reports
How can we allow login with domain users on other report manager url's?

Below link may be helpful,
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/623da309-21fa-42a8-905f-1424144a347d/setting-up-a-user-in-ssrs?forum=sqlreportingservices
Regards, RSingh

2 users can't login - HTTP Status 500 - on Teaming 2.0

I have 2 user that can't login to Teaming 2.0. They get this error: "HTTP Status 500". Even if I enter a bogus password for them the "HTTP Status 500" error occurs. I use LDAP authentication to eDirectory. These users DON'T have duplicate objects in my tree. In eDirectory they have first name, last name, full name, phone number and email address entries. All other users can login. Where are the Apache Tomcat/6.0.18 logs on a SLES 10 install of Teaming 2.0? There are log files in /opt/novell/teaming/
Browser screen content:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.springframework.dao.IncorrectResultSizeDataAcc essException: Incorrect result size: expected 1, actual 2
org.springframework.security.ldap.SpringSecurityLd apTemplate$3.executeWithContext(SpringSecurityLdap Template.java:204)
org.springframework.ldap.core.LdapTemplate.execute WithContext(LdapTemplate.java:807)
org.springframework.ldap.core.LdapTemplate.execute ReadOnly(LdapTemplate.java:793)
org.springframework.security.ldap.SpringSecurityLd apTemplate.searchForSingleEntry(SpringSecurityLdap Template.java:190)
org.springframework.security.ldap.search.FilterBas edLdapUserSearch.searchForUser(FilterBasedLdapUser Search.java:118)
org.springframework.security.providers.ldap.authen ticator.BindAuthenticator.authenticate(BindAuthent icator.java:82)
org.springframework.security.providers.ldap.LdapAu thenticationProvider.authenticate(LdapAuthenticati onProvider.java:229)
org.springframework.security.providers.ProviderMan ager.doAuthentication(ProviderManager.java:195)
org.springframework.security.AbstractAuthenticatio nManager.authenticate(AbstractAuthenticationManage r.java:46)
org.kablink.teaming.module.authentication.impl.Aut henticationModuleImpl.doAuthenticate(Authenticatio nModuleImpl.java:280)
org.kablink.teaming.module.authentication.impl.Aut henticationModuleImpl.authenticate(AuthenticationM oduleImpl.java:245)
sun.reflect.GeneratedMethodAccessor660.invoke(Unkn own Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.springframework.aop.support.AopUtils.invokeJoi npointUsingReflection(AopUtils.java:307)
org.springframework.aop.framework.ReflectiveMethod Invocation.invokeJoinpoint(ReflectiveMethodInvocat ion.java:182)
org.springframework.aop.framework.ReflectiveMethod Invocation.proceed(ReflectiveMethodInvocation.java :149)
org.kablink.teaming.search.interceptor.IndexSynchr onizationManagerInterceptor.invoke(IndexSynchroniz ationManagerInterceptor.java:67)
org.springframework.aop.framework.ReflectiveMethod Invocation.proceed(ReflectiveMethodInvocation.java :171)
org.springframework.aop.interceptor.AbstractTraceI nterceptor.invoke(AbstractTraceInterceptor.java:11 3)
org.springframework.aop.framework.ReflectiveMethod Invocation.proceed(ReflectiveMethodInvocation.java :171)
org.springframework.aop.framework.JdkDynamicAopPro xy.invoke(JdkDynamicAopProxy.java:204)
$Proxy21.authenticate(Unknown Source)
org.springframework.security.providers.ProviderMan ager.doAuthentication(ProviderManager.java:195)
org.springframework.security.AbstractAuthenticatio nManager.authenticate(AbstractAuthenticationManage r.java:46)
org.springframework.security.ui.webapp.Authenticat ionProcessingFilter.attemptAuthentication(Authenti cationProcessingFilter.java:82)
org.springframework.security.ui.AbstractProcessing Filter.doFilterHttp(AbstractProcessingFilter.java: 252)
org.springframework.security.ui.SpringSecurityFilt er.doFilter(SpringSecurityFilter.java:53)
org.springframework.security.util.FilterChainProxy $VirtualFilterChain.doFilter(FilterChainProxy.java :371)
org.springframework.security.ui.logout.LogoutFilte r.doFilterHttp(LogoutFilter.java:89)
org.springframework.security.ui.SpringSecurityFilt er.doFilter(SpringSecurityFilter.java:53)
org.springframework.security.util.FilterChainProxy $VirtualFilterChain.doFilter(FilterChainProxy.java :371)
org.springframework.security.context.HttpSessionCo ntextIntegrationFilter.doFilterHttp(HttpSessionCon textIntegrationFilter.java:235)
org.springframework.security.ui.SpringSecurityFilt er.doFilter(SpringSecurityFilter.java:53)
org.springframework.security.util.FilterChainProxy $VirtualFilterChain.doFilter(FilterChainProxy.java :371)
org.kablink.teaming.spring.security.ZoneGrabbingFi lter.doFilterHttp(ZoneGrabbingFilter.java:58)
org.springframework.security.ui.SpringSecurityFilt er.doFilter(SpringSecurityFilter.java:53)
org.springframework.security.util.FilterChainProxy $VirtualFilterChain.doFilter(FilterChainProxy.java :371)
org.springframework.security.util.FilterChainProxy .doFilter(FilterChainProxy.java:174)
org.springframework.web.filter.DelegatingFilterPro xy.invokeDelegate(DelegatingFilterProxy.java:236)
org.springframework.web.filter.DelegatingFilterPro xy.doFilter(DelegatingFilterProxy.java:167)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.18 logs.

You need to be sure that it is not an LDAP problem... the best way is to start from LDAP to investigate. Enable the LDAP trace on eDir with imonitor, during the teaming login. Also you can use ldapsearch to have full details on the accounts in order to compare them with a working user (a space somewhere, an additional attribute, etc...).

Can't replace old text with new text in a text box

Hello everyone. This is my first time posting in the forum, so I'm hoping this works out well. We recently purchased a few copies of Adobe Acrobt X for the office, and one of the users is having an issue with editing text in a field. She can type new text into a box, but when she goes back to replace that text with something else, the old text stays. New text appears on top of the old text, and you can see both. Is there a way to simply highlight the old text, delete it, and then replace it with new text? Thanks in advanace for your assistance. I understand this might be confusing, so let me know if you have questions.
Thanks,
Dan

You have to use the text touchup tool (there is a new name like text edit tool in AA X) to edit such text. It sounds like you are using the typewriter tool or something like it. Text editing in Acrobat is not for the weak at heart. It can be very frustrating and is not recommended except for very minor changes. If at all possible, you should edit the original and just recreate the PDF.

Users can't login on workstations with new os

Similar Messages

Maybe you are looking for