Users Disconnected New install X Server 10.4.7

We were running XServer 10.2.8 with OS X, 9, 8.6, and windows users only AFP and windows services running system would hang and required numerous restarts thoughout a week and sometimes daily upgraded to 10.4.7 as recommened to posibly solve this issue now my OS 10, and 9 users are getting disconnected from sharepoints without warning this is causing loss of data and 9 users have to reboot computers to log back on and also crashes program being used when disconnected. Users are created as part of staff group no other groups are present all shares have all access ownership is administrator group staff (users) everyone all read write. Any suggestions

Hello Camelot,
thanks for giving a hand. On the third point you say to
"3) change the router at 172.18.0.1 to route 192.168.1.x via 172.18.0.2 - in this way the router will send any traffic for 192.168.1.x to the external interface of this server, which will pass it through."
Unfortunately i do not have access to the settings on our external router. I can only change internal settings for the remainder of the network. Is there any way to do the last part internally?
i think i have something up and running but not too sure of its efficiency.
I have moved the external connection to the top of the list on network configs.
I have set a firewall rule for the 172.18 range and set it to allow all traffic. ( i thought since there is another nat router after this is should be ok).
I have set nat service to translate and forward requests on the external port.
I removed the router address from the internal command and added the proxy address to the external.
I just need to confirm all is working correctly from the client-side.
PS what would be the best authenticating proxy at the moment? Free is obvioulsy best.
I have starrted to look at dgcomplete but i lacks authentication at the moment. Any pointers to a config build for squid and dansguardian including authentication would be ace.
Thanks in advance.

Similar Messages

Can't log in with newly created user on new install of Arch [solved]

Hi all,
Yesterday I installed Arch anew (because I had a hardware failure that took out my hard drive), but now I'm encountering an issue with logging in.
After following the installation guide, and creating a new user, I find that I'm unable to log in as said user.
It complains about wrong password, but it's the exact same password that I entered mere moments before that, when creating the new user.
I can "log in" as said user by first logging in as root (which does work) and doing "su - <username>" (though then it doesn't ask for a password).
Can someone point me in the right direction to fix this problem?
Last edited by madjo (2013-07-03 20:19:43)

I think cfr meant to say you shouldn't "fix" bash path - as some users did. Unfortunately there's a bit confusion wrt which paths should be used - see this ML thread.
Some say we should keep /bin/foo for compatibility, others say that we should boldly move to /usr/bin/foo.

Add moved /users to new install

Hello,
I moved my /users directory using the 'Advanced Options' under Accounts in System Prefs to another drive. My boot drive is simply for apps and only maintains an 'admin' user account for recoverability purposes. My issue is that I recently installed a fresh image of Snow Leopard on the boot drive and am having a tough time adding that account that exists on another drive (that was created via a prior System) back to my newly installed system.
Did I have to 'import' that user partition on installation setup (as asked by the install process)? or is there a way that I can re-use that /users account that is on a different drive with my new fresh install?
Any help is appreciated,
-J

You may need to check the Unified Messaging profile setup in Unity to ensure it still has access into the new store. In 2003, it uses WebDav, so if the account you are using is not setup to use WebDav on the new store, Unity can not deliver nor retrive information from this new store. Also note, there is some sort of odd requirement with Microsoft and WebDav.. the account that uses WebDav must have a mailbox setup and at least one message sent and received to it. (Or just logged into at least once for it to be active). I have no idea why, but its documented at MS and seemed to fix a problem for me during a prior install with CUC and 2003 Exchange

New install centos server

sir/meadem, sir i am installed in centos but not installed server,error disk sda contains bios raid metadata but is not part ofany recognized bios raid sets.ignoring disk sda

I got an answer to this from Oracle Support. I actually spoke to a person that used to work for Reliaty (the company Oracle bought to get OSB).
The answer is that the patch levels changed each time they released a new platform. The software is identical. This is different from the way Oracle handles other software.
So, use the appropriate platform and don't worry about the patch levels.
They hope to get everything at the same level eventually.

New Install on Server - What Version Do I Need to Buy?

Hi guys/gals-
Quick easy question....I've worked with CF for around 3 years
now, but am about to face my first employment requiring me to
purchase/install it on a server...here's my question. If I've got a
single Windows server, that hosts 2 to 5 websites, can I get by
with the Standard edition of CFMX 7, or do I have to buy the
Enterprise version? What are the differences between the two in
respect to how many websites it can support?
Thanks!
T

If you just need basic Cold Fusion, then standard will do
what you need.
If you need clustering, sandbox, gateways, hi-perf mail and
reporting, etc then you should use Enterprise.
The number of sites doesn't matter - your HW and traffic
determine that factor (
how many it can handle).
The comparison can be found here
http://www.adobe.com/products/coldfusion/productinfo/product_editions/#s2

Team Foundation Server 2013 update 4 New Install - Error 503 Service Unavailable for Sharepoint Central Admin

Hello,
I ran a new install of Team Foundation Server and let it install the built in SharePoint pieces on a single server setup. After the install i'm able to access the
http://teamfoundation:8080/tfs/ address without issue but am unable to create a project. When I attempt to create a project I get the following error:
TF30172: You do not have permission to create a new team project (when checking security i'm a member of the project collection administrators and Team Foundation Administrators)
This led me to look at the sharepoint central administration site where I receive the following error:
Error 503 Service Unavailable
I've gone through and validated the identity is set correctly in IIS for the following services:
SharePoint Central Admin v4
SharePoint15AppPool
The SharePoint Web Services Root is set as LocalService instead of the domain user.
The identity domain user is setup as local administrator on the Team Foundation Server. They are all set to use .net v4.0.30319 with integrated Pipeline mode.
Any help would be great!
Thanks!
Eric

Hi Eric,
Thanks for your post.
Please share your detailed team project creation log here.
In your TFS Admin Console>>Extensions for SharePoint Products tab, ensure SharePoint Web Application shows correctly in the right panel. And go to TFS Admin Console>>Application Tier>>SharePoint Web Applications tab, ensure your SharePoint
web application displays in the right panel, then select your SharePoint web application and click Repair Connection, ensure can repair successfully.
In your IIS Manager, select your SharePoint Central Administration V4 site and click Browser:17012(http) in the right panel, check if your SharePoint Central site can be opened successfully or not. If your SharePoint Central site cannot be accessed, I think
this issue relate to your SharePoint site, you should contact SharePoint experts to resolve this issue first. After you resolved this issue and your SharePoint Central Admin site can be accessed correctly, then try to create your team project(within SharePoint
site) again, if there still has issue when creating team project, please share the detailed error message here, we will try to resolve it.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

New install of Crystal 2013 Server; getting errors

New install of Crystal 2013 Server on Windows 2012R2 Server
In the Connectivity Services; the ConnectionServer32 shows a state of Initalizing, and Disabled
In the Crystal Report Services; the CrystalReports2013ProcessingServer shows a state of Running with errors and Disabled
In the Crystal Report Services; the CrystalReports2013ReportApplicationServer shows a state of Stopped and Enabled
Hovering over Stopped I get "The Executable could not be launched. Possible reasons are insufficient RAM or disk space, or an invalid filepath or working directory. Actual reason: CreateProcess error + 14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log."
Application Event Log Entry:
Log Name:      Application
Source:        BusinessObjects_cms
Date:          4/21/2014 11:43:12 AM
Event ID:      33017
Task Category: General
Level:        Warning
Keywords:      Classic
User:          N/A
Computer:      DBH-TCRYSTAL01.sbcounty.gov
Description:
Unable to contact server DBHTCRYSTAL01.ConnectionServer32 on machine DBH-TCRYSTAL01.sbcounty.gov to perform status notification. Please check the server's system log for errors.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="BusinessObjects_cms" />
    <EventID Qualifiers="0">33017</EventID>
    <Level>3</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-21T18:43:12.000000000Z" />
    <EventRecordID>32081</EventRecordID>
    <Channel>Application</Channel>
    <Computer>DBH-TCRYSTAL01.sbcounty.gov</Computer>
    <Security />
</System>
<EventData>
    <Data>DBHTCRYSTAL01.ConnectionServer32</Data>
    <Data>DBH-TCRYSTAL01.sbcounty.gov</Data>
</EventData>
</Event>
System Event Log Entry:
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          4/21/2014 7:49:07 AM
Event ID:      10016
Task Category: None
Level:        Error
Keywords:      Classic
User:          SYSTEM
Computer:      DBH-TCRYSTAL01.sbcounty.gov
Description:
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{05D1D5D8-18D1-4B83-85ED-A0F99D53C885}
and APPID
{AD65A69D-3831-40D7-9629-9B0B50A93843}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10016</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-21T14:49:07.818690400Z" />
    <EventRecordID>8228</EventRecordID>
    <Correlation />
    <Execution ProcessID="668" ThreadID="804" />
    <Channel>System</Channel>
    <Computer>DBH-TCRYSTAL01.sbcounty.gov</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="param1">application-specific</Data>
    <Data Name="param2">Local</Data>
    <Data Name="param3">Launch</Data>
    <Data Name="param4">{05D1D5D8-18D1-4B83-85ED-A0F99D53C885}</Data>
    <Data Name="param5">{AD65A69D-3831-40D7-9629-9B0B50A93843}</Data>
    <Data Name="param6">NT AUTHORITY</Data>
    <Data Name="param7">SYSTEM</Data>
    <Data Name="param8">S-1-5-18</Data>
    <Data Name="param9">LocalHost (Using LRPC)</Data>
    <Data Name="param10">Unavailable</Data>
    <Data Name="param11">Unavailable</Data>
</EventData>
</Event>
I also have second Windows 2012R2 Server / Crystal 2013 Server install that is working just fine and the only difference is it is not a member of the Domain.
Barry Streets
[email protected]
510-238-2727 ext 2780

In addition to checklists provided by Josh; I would suggest you to perform a repository scan of the system to identify whether any objects were not installed properly and there might be a possible corruption. Use the link mentioned below to perform repository scanning.
How to use Repository Diagnostic Tool - Business Intelligence (BusinessObjects) - SCN Wiki
You can try to repair the install. Also as this is a new install you can directly go for re-installing the software.
PS: Try to re-download the software from the service market place rather than copying the installer from existing one.

New Mac Mini Server, two Hard drives, Can I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

New Mac Mini Server, has two Hard drives, could I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

I haven't purchased a Mac Mini at this time and I may not if I can't use it as a non server. I need to update my system I would be better off buying a new Mac with Snow Leopard the last app that will run Rosetta. The Mac Mini Server has a quad 2.0 processor and 4 GB RAM and two internal hard drives and should out perform my dual 1.25 G4. I can run PPC apps on my G4 but it is 8+ years old and seems to be getting noisy. I don't want to tie myself to another old machine. I want a machine that will work with Intel Apps I was hoping that the two hard drives would allow me to boot from the second with Snow Leopard and use Lion on the first drive to be able to keep up to date with all my other universal apps and Mac OS up grades. The application I use the most is my CanvasX app with drawing & vector effects, text & typography, sprite technology, painting, image editing, and multimedia tools are all in this one app but will not be updated to run Intel apps. I am frozen in time because my most valuable Application won't be updated and Apple has cut me off by not supporting PPC in Lion and onward; Apple used to backward support but I guess that they are no longer as user friendly and concerned with a happy user. I have always been a loyal Mac user and I will not migrate to Windows under any circumstance; I hate windows!
Thanks for your prompt response,
Dick Deaton

New Install - Best Way to add users

Hi,
Disclaimer: 100% New to Macs!
I need advice on setting up a new Mac Mini Server. Our intent is to use this as an e-mail/calendar server for a small business, replacing a Lotus Domino server that is being retired. Our computing enviroment is based on a (don't laugh) Windows NT4 domain and as such we do not support Windows Active Directory.
Since I was not be able to import users automatically (presumably because of the lack of Active Directory) during the install, I selected "Create users and groups" and started adding users once the install was done. After doing that I then logged off of the Admin account and tried to log on as one of these newly created users and was unable to do so. I tried several others and had the same result.
So I guess my questions are:
Should I have chosen to "Configure manually" for the creation of users? or how should I go about adding these users to this system?
Any thoughts/recommendations on a OS X Server for Dummies type book?
Thanks,
Alan

After doing that I then logged off of the Admin account and tried to log on as one of these newly created users and was unable to do so.
When you say log on, do you mean log on as a user of the Mac Mini running OS X server?
I don't think server users can log on to the server itself unless they have a user account on the computer running OS X server, in this case your Mac mini.
Should I have chosen to "Configure manually" for the creation of users?
Not at all. Your users should have access to the services you allow for them
Matt

Installing SQL Server 2012 on a new VM - Error Code 0x858C0017

TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging.
Error code 0x858C0017.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&EvtType=0xFDC38F1F%25400x75B506EA%25401420%254023
BUTTONS:
OK
I am trying to create a new dev environment and I'm using VMware Player running Windows Server 2008R2 SP1. I am able to run through the setup checks but when I hit "Next" I receive the error above. Also, I am able to install this on my personal
computer - just not in my VM. Any way to solve this?
Thanks!
Edit: Just to clarify some things.
1) I am trying to install SQL Server 2012 Enterprise Edition.
2) I downloaded the .ISO file using my MSDN License and when I downloaded the file the text boxt next to it said that a product key was not required.
3) I went inside the setup directory and found the DefaultSetup.ini and there was a product key inside that has been confirmed by a rep to be a valid product key.

Hello,
Try using WinRAR to unzip the ISO file to a local drive and install from there. Please do not use WinZIP.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
I was also facing the same issue
TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging.
Error code 0x858C0017.
Earlier i used a different product to unzip the iso file.
Once i tried unzipping it using WINRAR, it worked. And installation went fine. Thanks Alberto

New install Express on Win 8 can see the Server name but cannot see the instance

I am doing this over the phone with a client who is not sure what he is doing we have installed Ok the folders exist and we have enabled TCP/IP
The instance is MSSQLServer when we try to connect all we get is 'ComputerName' I am expecting 'ComputerName \MSSQLServer'
The user does not have administrator rights and he installed SQL Server without the administrator (I think, I am not sure he knows)
I am looking for clues as to what may cause the instance name to not appear
thanks in advance
jnc

Thanks, that is useful but the list of instances just matches the details in SQL Configuration manager
What I need is to understand why, if the server is listed and is running it is not visible when we try to connect
jnc
Hi jnc,
Could you please verify that if the instance name is not listed in “Server name” drop-down list of SQL Server Management Studio (SSMS)? If so, does the instance list in the Local Servers tab in the “Browse for Servers” dialog?
If you cannot see the express instance in the Local Servers tab in the “Browse for Servers” dialog, the reason may due to SQL Server cannot get the appropriate registry entry information in the System Registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
SQL Server\Instance Names).
To work around this issue, you can manually input the instance name which will be show in the Local Servers tab. Also make sure that right click on SSMS and then choose “Run As Administrator” to start it.
However, if the express instance is listed in the Local Servers tab in the “Browse for Servers” dialog, but not in the “Server name” drop-down list. Then if you have never connected with the instance name before, its entry will not listed in the drop-downlist.
Or if you have connected to server with a wrong instance name, you cannot see its entry the next time.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

New mac mini server: Install OS on older Mac Mini?

I have an UBUNTU server running on the network and was thinking of replacing it with the new Mac Mini Server edition. I also have an older (2009 - intel) Mac Mini.
I was wondering if I could install the OS X Server OS that comes with the NEW mini on the OLDER Mac Mini and reformat the newer server as a "normal" workstation.
I can deal with the optical drive issue. I'm just wondering if the OS X Server software is tied to the newer hardware in any way.
I'd be saving about $300 this way - not a big deal but still worth it. The "traditional" way would be to buy an new Mac mini as a workstation and a copy of Mac OS X Server for the older Mac Mini
Tom

I was wondering if I could install the OS X Server OS that comes with the NEW mini on the OLDER Mac Mini and reformat the newer server as a "normal" workstation.
No. That OS can only be installed on the Mac model it shipped with.
(52238)

New install of SQL 2014 Std MSDN. Get "The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging."

Trying to install a new version of SQL 2014 Std 64 or x86. Installing on Windows 8.1Pro 64bit machine.
I get:
"TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging.
Error code 0x858C0017."
I looked at the summary log and that is the only error.
I made sure there were no other instances of SQL on this machine. Uninstalled all VS2013 and sql instances just in case. IF there is somewhere to check if a previous version or license is causing the issue, i would be glad to check.
Any help would be appreciated.

Hi,
Please read this thread with similar issue
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bdd94577-515c-49fa-be44-008eacece057/installing-sql-server-2012-on-a-new-vm-error-code-0x858c0017?forum=sqlsetupandupgrade
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

What do I need to install on server BO to make a new connection to DB2 ?

Hi experts,
i'm on a RedHat Linux server, and the CMS DB is on Oracle, and all the universes are connected to Orale.
Now I have to do a new universe that points to a new DB2 v9.7 data warehouse.
1) What do I have to install on server to make my DB2 connection work?
2) I've seen there are 2 diferent type of connection to DB2: "Client IBM DB2" and "Driver JDBC", what is the better connection?
Best Regards
Camillo Rospigliosi
BO XI 3.1 SP2
Linux RedHat 5 server
Oracle 9 repository

Hello,
you have to install the DB2 Client on your BO Server. Please install the 32Bit Version ob the Client. After the Installation you have to cataloge your DB2 Database(s).
Also you have to install the DB2 Client on your Development PC where you develope your DB2 based Universes.
Regards
-Seb.

New install of SJS Ent 8 on Solaris, can't start Application Server 8.1

Hello,
Appreciate in advance your help.
Just downloaded and installed SJS 8.1 on a new Sun Solaris 10 box. I'm able to run the IDE and have started the Tomcat server, but when attempting to start the SJS 8.1 application server, I get:
The Sun Java System Application Server 8.1 could not start.
More information about the cause is in the Server log file.
Possible reasons include:
- Port conflicts. (use netstat -a to detect possible port numbers already used)
- Incorrect server configuration
- Corrupted Deployed Applications
The problems are:
- There is no server.log file in the expected directory at /opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/logs
- I ran netstat -a, but could glean no useful information
- I have not modified the server configuration since the new install
- I have not deployed my application (since I can't start the server).
Forgive my ignorance since I'm not a Solaris expert. I would greatly appreciate your assistance.

No difference in server.log after setting level="FINEST".
Don't know if it would help, but the contents of my server.log file follow:
[#|2006-09-25T15:39:46.485-0400|INFO|sun-appserver-pe8.1_02|javax.enterprise.tools.launcher|_ThreadID=10;|
/opt/sun/jstudio_ent8/jdk1.5.0_04/bin/java
-client
-Xmx512m
-XX:NewRatio=2
-Dcom.sun.aas.defaultLogFile=/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/logs/server.log
-Djava.endorsed.dirs=/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/endorsed
-Djava.security.policy=/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/config/server.policy
-Djava.security.auth.login.config=/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/config/login.conf
-Dsun.rmi.dgc.server.gcInterval=3600000
-Dsun.rmi.dgc.client.gcInterval=3600000
-Djavax.net.ssl.keyStore=/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/config/keystore.jks
-Djavax.net.ssl.trustStore=/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/config/cacerts.jks
-Djava.ext.dirs=/opt/sun/jstudio_ent8/jdk1.5.0_04/jre/lib/ext:/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/lib/ext
-Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
-Dcom.sun.aas.configName=server-config
-Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
-Ddomain.name=myDomain1
-Djmx.invoke.getters=true
-Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
-Dcom.sun.aas.promptForIdentity=true
-Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
-Dcom.sun.aas.instanceRoot=/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1
-Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
-Dcom.sun.aas.domainName=myDomain1
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Dproduct.name=Sun-Java-System/Application-Server
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
-Dcom.sun.aas.configRoot=/opt/sun/jstudio_ent8/AppServ8.1UR2/config
-Djava.library.path=/opt/sun/jstudio_ent8/jdk1.5.0_04/jre/lib/i386/client:/opt/sun/jstudio_ent8/jdk1.5.0_04/jre/lib/i386:/opt/sun/jstudio_ent8/jdk1.5.0_04/jre/../lib/i386:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib:/usr/lib/lwp::/usr/lib
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-cp
/opt/sun/jstudio_ent8/jdk1.5.0_04/lib/tools.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/activation.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/mail.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/admin-cli.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-admin.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-jstl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-logging.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee-svc.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jax-qname.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jaxr-api.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/dom.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jaxr-impl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jaxrpc-api.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jaxrpc-impl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/relaxngDatatype.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/saaj-api.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/saaj-impl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/xsdlib.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jmxremote.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jsf-api.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jmxremote_optional.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jsf-impl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/rmissl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/xalan.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/xercesImpl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-assemblytool_ja.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp_ja.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt_ja.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher_ja.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/deployhelp_ja.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee_ja.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-assemblytool_zh.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-assemblytool_zh_CN.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp_zh.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp_zh_CN.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt_zh.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt_zh_CN.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher_zh.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher_zh_CN.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/deployhelp_zh.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/deployhelp_zh_CN.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee_zh.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee_zh_CN.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-assemblytool_ko.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp_ko.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt_ko.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher_ko.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/deployhelp_ko.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee_ko.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-assemblytool_fr.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp_fr.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt_fr.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher_fr.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/deployhelp_fr.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee_fr.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-assemblytool_es.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp_es.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt_es.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher_es.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/deployhelp_es.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee_es.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-upgrade.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-ext.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/install/applications/jmsra/imqjmsra.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/imq/lib/jaxm-api.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/imq/lib/fscontext.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/ant/lib/ant.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/pointbase/lib/pbclient.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/pointbase/lib/pbembedded.jar
com.sun.enterprise.server.PEMain
start|#]
I do notice that the class path references jdk1.5.0_04. When installing SJS I selected the separately installed jdk1.5.0_07. Could that be causing the problem?
You have great patience.

Users Disconnected New install X Server 10.4.7

Similar Messages

Maybe you are looking for